Q.List all secondary storage devices available at your school or home.

What is a Secondary Storage Device?

Imagine you're solving a long problem on a sheet of paper. Your working memory — what you can hold in your head at once — is very limited. You jot down intermediate steps on the paper so you don't forget them. That paper is like primary memory (RAM): fast, but small and temporary. When you finish, you might file that sheet in a folder or save it in a drawer. That folder or drawer is secondary storage: it keeps your work permanently, even after you walk away.

In a computer, secondary storage devices are the long-term memory. They hold data and programs even when the power is off. Unlike RAM, which is volatile and fast, secondary storage is non-volatile and generally slower, but much larger in capacity and far cheaper per byte.

---

The Precise Definition

Key properties:

• Non-volatile — data survives power loss.
• High capacity — gigabytes to terabytes.
• Slower access — milliseconds vs. nanoseconds for RAM.
• Cheaper per unit — cost per gigabyte is a fraction of RAM's.

---

How It Works (The Big Idea)

The CPU cannot execute instructions or manipulate data directly from a hard disk or SSD. It works only with what's in RAM. So when you open a file, the operating system copies it from secondary storage into RAM. When you save, it writes the modified data back. This is the storage hierarchy:

CPU Registers  (fastest, smallest, most expensive)
    ↓
Cache Memory   (very fast, small)
    ↓
Primary Memory (RAM)  (fast, moderate size, volatile)
    ↓
Secondary Storage     (slower, huge, non-volatile)

Every step down the hierarchy is larger, cheaper, and slower.

---

Common Types of Secondary Storage

1. Magnetic Storage (Hard Disk Drives — HDDs)

A spinning metal platter coated with magnetic material. A read/write head floats nanometers above the surface, magnetising tiny regions to represent 0s and 1s.

• Pros: Very high capacity for low cost. Mature technology.
• Cons: Mechanical parts make it slow, fragile, and power-hungry.
• Typical speed: ~100–200 MB/s sequential read.

2. Flash Storage (Solid State Drives — SSDs)

No moving parts. Uses NAND flash memory chips — arrays of transistors that trap electrons to store charge. A charged cell = 0, discharged = 1 (or vice versa, depending on the design).

• Pros: Extremely fast (10x–100x HDDs), silent, shock-resistant, low power.
• Cons: More expensive per GB, limited write cycles (though modern SSDs last for years of normal use).
• Typical speed: ~500 MB/s (SATA) to 7000 MB/s (NVMe PCIe 4.0).

3. Optical Storage (CD, DVD, Blu-ray)

A plastic disc with a reflective layer. A laser burns pits (or changes the reflectivity of a dye) to store data. A weaker laser reads the pattern.

• Pros: Cheap to manufacture, portable, immune to magnetic fields.
• Cons: Very slow, low capacity (CD: 700 MB, DVD: 4.7 GB, Blu-ray: 25–128 GB), easily scratched.
• Typical speed: ~1–10 MB/s.

4. Magnetic Tape …