Q.Which function of management is known as the father of controlling?
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Planning Control Relationship
Planning Control Relationship — First Encounter
Let’s start with a simple story. Imagine you’re building a house. Before you lay a single brick, you draw up a detailed plan: where the kitchen goes, how many windows, the roof slope. That’s planning — deciding what to do and how to do it.
Now, once construction starts, you don’t just blindly follow the plan. You check: Is the foundation level? Are the walls straight? If something is off, you adjust. That’s control — checking progress and correcting deviations.
The planning control relationship is the idea that these two activities are not separate. They are two sides of the same coin. Planning without control is a wish; control without planning is chaos.
The Intuition in One Sentence
Planning sets the standard (the target), and control measures performance against that standard — then feeds back to improve the next plan.
Think of a thermostat. You set the desired temperature (planning). The thermostat reads the room temperature (control). If it’s too cold, it turns on the heater (corrective action). The heater changes the room, and the cycle repeats. Planning and control are a continuous loop, not a one-time event.
The Precise Statement
In management and operations, the planning control relationship is formally defined as:
Planning and control are interdependent and cyclical.
Planning establishes goals, standards, and resource allocations.
Control monitors actual performance, compares it to the plan, identifies deviations, and triggers corrective actions — which then become inputs for the next planning cycle.
Key points to remember:
- Planning precedes control — you cannot control something you haven’t planned.
- Control validates planning — if actual results differ wildly from the plan, the plan itself may need revision.
- The cycle repeats — control data (e.g., actual costs, time taken, quality issues) feeds back into future planning, making it more realistic.
A Concrete Example (Exam-Friendly)
Consider a student preparing for an exam:
| Activity | Planning | Control |
|---|---|---|
| What | Decide to study 5 chapters in 10 days | Check how many chapters actually covered each day |
| How | Allocate 2 hours per day | Compare actual study time vs planned |
| Outcome | Target: 80% marks in mock test | Score 65% → identify weak topics → revise plan |
Here, the plan sets the target. Control reveals the gap. The student then adjusts the plan (more time on weak topics). That’s the relationship in action.
--- …
Control has meaning only against pre-set standards, and standards are fixed while planning — so planning is the basis of control. This GSEB Commerce question asks which function is the father of controlling. …
The correct option is (d) Planning. Because controlling measures actual results against planned standards, planning is the foundation — the "father" — of controlling.
- (a) Organisation, (b) Staffing and (c) Directing are other functions but do not supply the standards control checks against. …
Showing the 12 most recent of 15 on this concept.
- CBSE 2026Set 66/2/11 markMCQQ.There are two statements, Assertion (A) and Reason (R). Assertion (A) : Controlling should not be misunderstood as the last function of management. Reason (R) : Controlling is a function that brings the management cycle back to the planning function. Choose the correct alternative from those given below : (A) Assertion (A) is false and Reason (R) is true. (B) Both Assertion (A) and Reason (R) are false. (C) Assertion (A) is true and Reason (R) is false. (D) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of Assertion (A).
›Reveal solutionSolution
Controlling is not the final management function because it provides feedback that directly informs and revises future planning, making the management process a continuous cycle.
In the realm of management, functions like planning, organising, staffing, directing, and controlling are often discussed sequentially. While this sequence helps in understanding their individual roles, it is crucial to grasp that management is not a linear process with a definitive end. Instead, it is a dynamic and continuous cycle, where each function influences and is influenced by others.
Planning, at its heart, is the foundational function. It involves setting objectives, formulating strategies, and developing detailed action plans to achieve organisational goals. It is essentially deciding in advance what to do, how to do it, when to do it, and who is to do it. Without clear plans, there would be no direction, and subsequent management functions would lack a framework.
Controlling, on the other hand, is the function that ensures activities conform to the plans. It involves establishing performance standards, measuring actual performance, comparing it with the standards, and taking corrective actions if deviations occur. The essence of controlling is to bring actual performance closer to desired performance.
Now, let's address the assertion: "Controlling should not be misunderstood as the last function of management." This statement is profoundly true. While controlling often appears at the end of a list of management functions, it is far from being the final act. Management is an ongoing process, and an organisation operates continuously. Therefore, its functions must also be continuous.
NoteThink of it like a journey: planning is charting the route, and controlling is checking the map periodically to ensure you're still on course and making adjustments if you've veered off. The journey doesn't end when you check the map; you continue driving, and you might check the map again later.
This brings us to the reason: "Controlling is a function that brings the management cycle back to the planning function." This statement is also true and provides the perfect explanation for why controlling is not the last function. The information gathered during the controlling process—specifically, the identification of deviations from standards and the analysis of their causes—serves as vital input for future planning. …
- CBSE 2026Set ANNUAL1 markMCQQ.Control is not possible without A) Directing B) Coordination C) Delegation D) Planning
›Reveal solutionSolution
Controlling needs plans to supply the standards it measures against, so control is impossible without planning — the answer is D) Planning.
The controlling function works by comparing actual performance with standards and taking corrective action where there is a deviation. These standards of performance are set during planning. Therefore:
- Without planning there are no standards, and without standards there is nothing to measure actual performance against — controlling becomes impossible. …
- CBSE 2026Set ANNUAL1 markMCQQ.Which two functions are closely related?(a) Planning and control(b) Staffing and motivation(c) Organisation and supervision(d) Communication and packaging
›Reveal solutionSolution
Planning and controlling are the most closely related functions of management.
Planning provides the standards (targets) that controlling uses as its yardstick, and controlling, by revealing deviations, feeds back information that improves future planning. 'Planning without control is meaningless and control without planning is blind.' Hence they are interdependent — plannin …
- CBSE 2026Set ANNUAL1 markQ.What is the basis of control?
›Reveal solutionSolution
The basis of control is the predetermined standard of performance, fixed in advance through planning.
Control is fundamentally a comparison exercise: actual performance is measured against a standard, and deviations are identified and corrected. This makes planning the essential basis of controlling — without a plan/standard already in place (e.g. a sales target, a production quota, a quality specification, a budgeted cost), a manager would have nothing meaningful to compare actual results against, and "control" would be impossible. This is why planning and controlling are often ca …
- CBSE 2025Set ANNUAL1 markQ.Fill in the blank: ______ establishes standards for controlling.
›Reveal solutionSolution
Planning establishes the standards against which controlling measures performance.
Controlling checks whether activities conform to plans by comparing actual performance with standards. These standards are nothing but the targets and goals set during planning. Therefore it is planning t …
- CBSE 2025Set ANNUAL1 markMCQQ.Write True or False: Controlling is not related with planning.(a) True(b) False
›Reveal solutionSolution
False; controlling is closely related to planning.
Planning and controlling are inseparable. Planning sets the objectives and standards; controlling compares actual performance with those standards and corrects deviations, feeding back into fresh planning. Planning without controlling is meaningless and c …
- CBSE 2025Set ANNUAL1 markMCQQ.Controlling cannot be performed without(a) planning(b) organizing(c) directing(d) leadership
›Reveal solutionSolution
Controlling is impossible without planning because planning supplies the standards against which performance is measured.
Controlling involves setting performance standards, measuring actual performance, comparing it with the standard, and taking corrective action on any deviation. The standards used in this process are derived directly from the objectives and targets fixed during planning. Without a plan there is no predetermined standard to compare performance against, so control has nothing to measure performance against.
…
- CBSE 2024Set ANNUAL1 markMCQQ.Planning establishes a base or standard for(a) organizing(b) staffing(c) directing(d) controlling
›Reveal solutionSolution
Planning and controlling are closely linked — planning fixes the goals and standards in advance, and controlling is the function that later measures actual results against exactly those standards. So planning establishes the base or standard for controlling, not for organizing, staffing or directing (though planning does influence those too, the "standard for comparison" role is specifically controlling's).
Think of it step by step: planning decides what is to be achieved (e.g. "produce 10,000 units this quarter," "keep wastage under 2%"). Those planned figures are the standards. Later, the controlling function measures what was actually achieved, compares it to the planned standard, finds the deviation, analyses the cause, and takes corrective action. Without planning, there would be no standard to control against — control would have nothing to compare performance to. This is why the NCERT syllabus explicitly calls planning and controlling "two sides of the same coin": planning without controlling is meaningless (no way to check if the plan is be …
- CBSE 2023Set ANNUAL1 markQ.Fill in the blank: Controlling is inter-related with ________.
›Reveal solutionSolution
Controlling is inter-related with planning.
Planning and controlling are inseparable twins. Planning sets the objectives and standards; controlling checks whether actual performance matches those standards and reports deviations, which feed back into fresh planning. Planning without controlling is …
- CBSE 2022Set MARCH1 markMCQQ.Which function of management is known as the father of controlling?(a) Organization(b) Staffing(c) Directing(d) Planning
›Reveal solutionSolution
The correct option is (d) Planning. Because controlling measures actual results against planned standards, planning is the foundation — the "father" — of controlling.
- (a) Organisation, (b) Staffing and (c) Directing are other functions but do not supply the standards control checks against. …
- CBSE 2022Set ANNUAL1 markMCQQ.Controlling function is more closely connected with the function of :(a) planning(b) staffing(c) organizing(d) coordinating
›Reveal solutionSolution
Controlling is most closely connected with planning.
Planning and controlling are twin functions. Planning fixes the objectives and standards; controlling measures actual performance against those standards and takes corrective action. Without plans there are no standards to control against, and without control managers cannot know if plans are being met. Hence planning is 'looking ahead' and controlling is 'looking back,' but the …
- CBSE 2022Set ANNUAL1 markMCQQ.From among the functions of management, which two functions are closely interrelated?(a) Planning and staffing(b) Staffing and controlling(c) Planning and directing(d) Planning and controlling
›Reveal solutionSolution
Planning and controlling are the two most closely interrelated functions of management.
Planning is often called a 'looking ahead' function — it sets goals and the standards of performance expected. Controlling is a 'looking back' function — it measures actual performance against those very standards set during planning, and reports deviations. Without planning, controlling would have no yardstick to measure against; without controlling, planning would never be checked for whether it actually worked. This two-way dependence — planning feeds controlling its standards, and controll …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.