Q.Photon is quantity of radiation with energy E = hv, where v is frequency and h is Planck's constant. Determine the dimension of h.

Showing the 12 most recent of 50 on this concept.

1. CBSE 2026Set 55/2/11 markMCQ
   Q.The magnetic flux $\phi$ (in Wb) linked with a coil is related to time $t$ (in s) as $\phi = 5At^2 + Bt - 2C$. The SI units of $A$ and $B$ are respectively (A) $\text{Wb s}^2,\ \text{Wb s}$ (B) $\text{Wb s}^{-1},\ \text{Wb}$ (C) $\text{Wb s}^{-2},\ \text{Wb s}^{-1}$ (D) $\text{Wb s}^{-1},\ \text{Wb s}^{-2}$

   ›Reveal solutionSolution

   The key idea is dimensional consistency: each term in $\phi = 5At^2 + Bt - 2C$ must have the same unit as $\phi$ (Wb). This forces $A$ to have units $\text{Wb s}^{-2}$ and $B$ to have units $\text{Wb s}^{-1}$, so the correct option is (C).

   The problem gives you a relation between magnetic flux $\phi$ (in webers) and time $t$ (in seconds):

   $\phi = 5At^2 + Bt - 2C.$

   You’re asked for the SI units of $A$ and $B$. The constants $5$ and $2$ are pure numbers — they have no units. So the only way this equation makes physical sense is if every term on the right-hand side has the same unit as $\phi$, which is the weber (Wb). This is the principle of dimensional homogeneity, and it’s the entire foundation of the solution.

   Let’s apply it term by term.

   1. First term: $5At^2$ Since $5$ is dimensionless, the unit of $5At^2$ is the unit of $A$ multiplied by the unit of $t^2$. Time $t$ is in seconds, so $t^2$ has unit $\text{s}^2$. For this term to equal a flux in Wb, we need:

   $\text{unit of }A \times \text{s}^2 = \text{Wb}.$

   Therefore:

   $\text{unit of }A = \frac{\text{Wb}}{\text{s}^2} = \text{Wb s}^{-2}.$

   2. Second term: $Bt$ Here $B$ is multiplied by $t$ (unit s). So:

   $\text{unit of }B \times \text{s} = \text{Wb}.$

   Hence:

   $\text{unit of }B = \frac{\text{Wb}}{\text{s}} = \text{Wb s}^{-1}.$

   3. Third term: $-2C$ …

   🔒 Start your 14-day free trial to see the full solution →
2. CBSE 2026Set ANNUAL1 markMCQ
   Q.Which of the following physical quantity has no dimensions?

   (1) Angular Velocity

   (2) Angular Acceleration

   (3) Angular Displacement

   (4) Stress

   ›Reveal solutionSolution

   Angular displacement is dimensionless because it is defined as the ratio of two lengths (arc / radius).

   Check each option's dimensional formula:

   • Angular velocity ω = dθ/dt → dimension [T^-1] (angle is dimensionless, so only 1/time survives).
   • Angular acceleration α = dω/dt → dimension [T^-2].
   • Angular displacement θ = arc length / radius = a ratio of two lengths → the length dimensions cancel, leaving a pure number (dimensionless), measured in radians. …

   🔒 Start your 14-day free trial to see the full solution →
3. CBSE 2026Set ANNUAL1 markMCQ
   Q.The dimensional formula of work done is the same as the dimensional formula of

   (a) Momentum

   (b) Power

   (c) Energy

   (d) Torque

   ›Reveal solutionSolution

   Work done and energy share the exact same dimensional formula [ML^2T^-2], because work is defined as a mode of energy transfer.

   Work done W = Force x displacement = [MLT^-2] x [L] = [ML^2T^-2].

   Check each option:

   • Momentum p = mv = [M][LT^-1] = [MLT^-1] -- different.
   • Power P = Work/time = [ML^2T^-2]/[T] = [ML^2T^-3] -- different.
   • Energy (kinetic or potential) = (1/2)mv^2 or mgh = [ML^2T^-2] -- matches exactly. …

   🔒 Start your 14-day free trial to see the full solution →
4. CBSE 2026Set ANNUAL1 markMCQ
   Q.What is the dimensional formula of angular momentum?

   (a) [ML^2T^-1]

   (b) [MLT^-2]

   (c) [MLT^-1]

   (d) [M^-1L^3T^2]

   ›Reveal solutionSolution

   Angular momentum L = mvr, so its dimensions are mass x velocity x radius = [ML^2T^-1].

   Angular momentum is defined as L = r x p = mvr (magnitude, for a point mass moving with linear velocity v at perpendicular distance r from the axis).

   Dimensions:

   • Mass, m = [M] …

   🔒 Start your 14-day free trial to see the full solution →
5. CBSE 2026Set ANNUAL1 markMCQ
   Q.Which of the following physical quantities has the same dimensions as impulse?

   (a) Force

   (b) Momentum

   (c) Work

   (d) Power

   ›Reveal solutionSolution

   Impulse J = F x delta t has dimensions [MLT^-1], identical to momentum p = mv.

   Impulse J = Force x time = [MLT^-2] x [T] = [MLT^-1].

   Compare:

   • Force = [MLT^-2] -- different.
   • Momentum = mv = [M][LT^-1] = [MLT^-1] -- matches exactly.
   • Work = [ML^2T^-2] -- different.
   • Power = [ML^2T^-3] -- different. …

   🔒 Start your 14-day free trial to see the full solution →
6. CBSE 2026Set ANNUAL1 markMCQ
   Q.The pair of physical quantities not having same dimension is:

   (a) Torque and Energy

   (b) Surface Tension and Impulse

   (c) Angular momentum and Planck's constant

   (d) None of the above

   ›Reveal solutionSolution

   Surface tension ($MT^{-2}$) and impulse ($MLT^{-1}$) have different dimensions; the other two pairs match.

   Work out each pair's dimensional formula:

   • Torque $= r \times F$, dimension $ML^2T^{-2}$. Energy also has dimension $ML^2T^{-2}$. Same.
   • Surface tension $=$ force/length, dimension $MLT^{-2}/L = MT^{-2}$. Impulse $=$ force $\times$ time, dimension $MLT^{-2}\cdot T = MLT^{-1}$. Different — an $L$ appears in impulse but not in surface tension. …

   🔒 Start your 14-day free trial to see the full solution →
7. CBSE 2026Set ANNUAL1 mark
   Q.Fill in the blank: Dimensional formula of ____ is same as the dimensional formula of angular momentum.

   ›Reveal solutionSolution

   Planck's constant has the same dimensional formula, [M L² T⁻¹], as angular momentum.

   Angular momentum L = mvr has dimensions [M][LT⁻¹][L] = [M L² T⁻¹].

   Planck's constant is defined through E = hν, so h = E/ν. Energy E has dimensions [M L² T⁻²] and frequency ν has dimensions [T⁻¹], so:

   h = [M L² T⁻²] / [T⁻¹] = [M L² T⁻¹]

   …

   🔒 Start your 14-day free trial to see the full solution →
8. CBSE 2026Set ANNUAL1 markMCQ
   Q.Which of the following has dimensional formula [ML^2T^-2] ?

   (a) Acceleration

   (b) Force

   (c) Work

   (d) Linear momentum

   ›Reveal solutionSolution

   [ML^2T^-2] is the dimension of energy/work, so the answer is (C) Work.

   We find the dimensions of each option:

   • Acceleration = velocity/time = [LT^-2]
   • Force = mass x acceleration = [MLT^-2]
   • Work = force x displacement = [MLT^-2] x [L] = [ML^2T^-2]
   • Linear momentum = mass x velocity = [MLT^-1] …

   🔒 Start your 14-day free trial to see the full solution →
9. CBSE 2025Set ANNUAL1 markMCQ
   Q.Which of the following couples of quantities have same dimension? (A) Work and energy (B) Force and momentum (C) Force and power (D) Momentum and energy

   ›Reveal solutionSolution

   Work and energy share the same dimension $[ML^2T^{-2}]$, both measured in joules.

   Check each pair:

   • Work $W = Fd$, dimension $[MLT^{-2}][L] = [ML^2T^{-2}]$. Kinetic energy $= \tfrac{1}{2}mv^2$, dimension $[M][LT^{-1}]^2 = [ML^2T^{-2}]$. Same dimension.
   • Force $[MLT^{-2}]$ vs momentum $[MLT^{-1}]$ — different. …

   🔒 Start your 14-day free trial to see the full solution →
10. CBSE 2025Set ANNUAL1 markMCQ
    Q.The velocity of a particle

    (v) at an instant t is given by v = at + bt^2. The dimension of b is

    (a) [L]

    (b) [LT^-1]

    (c) [LT^-2]

    (d) [LT^-3]

    ›Reveal solutionSolution

    By the principle of dimensional homogeneity, every term added to v must have the dimension of velocity; this forces [b] = [LT^-3].

    Given v = at + bt^2, where v is velocity, [v] = [LT^-1].

    …

    🔒 Start your 14-day free trial to see the full solution →
11. CBSE 2025Set ANN1 markMCQ
    Q.Find out the fundamental quantity from among the physical quantities given below:

    (a) velocity

    (b) temperature

    (c) force

    (d) density

    ›Reveal solutionSolution

    Temperature is the fundamental quantity here; velocity, force and density are all derived from base quantities.

    The seven SI base (fundamental) quantities are length, mass, time, electric current, thermodynamic temperature, amount of substance and luminous intensity. A derived quantity is built from these using multiplication or division.

    Checking each option:

    • velocity = displacement / time = length / time -> derived. …

    🔒 Start your 14-day free trial to see the full solution →
12. CBSE 2025Set ANNUAL1 markMCQ
    Q.The physical quantity having the dimensions [M¹T⁻²] is

    (a) (A) Density

    (b) (B) Tension

    (c) (C) Surface tension

    (d) (D) Viscosity

    ›Reveal solutionSolution

    [!TLDR]

    (C) Surface tension

    Why

    Surface tension = force/length = (MLT⁻²)/L = MT⁻², exactly matching the g …

    🔒 Start your 14-day free trial to see the full solution →