Q.Following data are obtained for the reaction- N₂O₅ → 2NO₂ + ½O₂
t/s: 0 | 300 | 600
[N₂O₅]/mol L⁻¹: 1.6×10⁻² | 0.8×10⁻² | 0.4×10⁻²
Prove that it follows first order reaction.

Showing the 12 most recent of 26 on this concept.

1. CBSE 2026Set 56/1/11 markMCQ
   Q.Which of the following curve represents the first order reaction ? (A) A graph of $t_{1/2}$ (y-axis) against initial concentration $[R]_0$ (x-axis): a straight line rising from the origin (B) A graph of $t_{1/2}$ against $[R]_0$: a horizontal straight line ($t_{1/2}$ independent of $[R]_0$) (C) A graph of Rate against Concentration: a horizontal straight line (D) A graph of Rate against Concentration: a curve that falls as concentration increases

   ›Reveal solutionSolution

   For a first-order reaction, the half-life $t_{1/2}$ is independent of the initial concentration $[R]_0$, so the correct plot is a horizontal straight line on a $t_{1/2}$ vs. $[R]_0$ graph — option (B).

   The key to this question is knowing how the half-life of a reaction depends on the initial concentration — and that dependence is different for different orders. Let’s build the intuition from the Arrhenius equation and the integrated rate laws.

   Why this approach works

   For a first-order reaction, the rate law is:

   $\text{Rate} = k[R]$

   where $k$ is the rate constant. The integrated form gives:

   $\ln \frac{[R]_0}{[R]} = kt$

   The half-life $t_{1/2}$ is the time when $[R] = \frac{[R]_0}{2}$. Substituting:

   $\ln \frac{[R]_0}{[R]_0/2} = k t_{1/2} \quad \Rightarrow \quad \ln 2 = k t_{1/2}$

   So:

   $t_{1/2} = \frac{\ln 2}{k}$

   Notice: no $[R]_0$ appears in this expression. That’s the defining feature — for a first-order reaction, the half-life is a constant, determined only by the rate constant $k$.

   Now let’s examine each option.

   1. Option (A): A straight line rising from the origin on a $t_{1/2}$ vs. $[R]_0$ graph. This would mean $t_{1/2} \propto [R]_0$, which is true for a zero-order reaction (where $t_{1/2} = [R]_0 / 2k$). Not first-order.

   2. Option (B): A horizontal straight line — $t_{1/2}$ does not change as $[R]_0$ changes. This matches $t_{1/2} = \ln 2 / k$, a constant. This is the correct plot for a first-order reaction.

   3. Option (C): A graph of Rate vs. Concentration that is a horizontal straight line. That would mean Rate is independent of concentration — which is true for a zero-order reaction (Rate = $k$). For first-order, Rate = $k[R]$, so the plot is a straight line through the origin, not horizontal. …

   🔒 Start your 14-day free trial to see the full solution →
2. CBSE 2026Set A1 markMCQ
   Q.Which of the following is not a first order reaction ?

   (a) CH3COOC2H5 + H2O --(H+)--> CH3COOH + C2H5OH

   (b) CH3COOC2H5 + NaOH --> CH3COONa + C2H5OH

   (c) 2H2O2 --> 2H2O + O2

   (d) 2N2O5 --> 4NO2 + O2

   ›Reveal solutionSolution

   Ester hydrolysis by NaOH (saponification) is second order (first order in ester and first order in OH-), so it is NOT a first-order reaction.

   • (a) Acid hydrolysis of ester with excess water is pseudo-first order. …

   🔒 Start your 14-day free trial to see the full solution →
3. CBSE 2026Set ANNUAL1 markMCQ
   Q.Acid hydrolysis of ethyl acetate is:

   (a) Zero order reaction

   (b) First order reaction

   (c) Second order reaction

   (d) Third order reaction

   ›Reveal solutionSolution

   Acid hydrolysis of ethyl acetate is a classic example of a pseudo first order reaction.

   The reaction is: $CH_3COOC_2H_5 + H_2O \xrightarrow{H^+} CH_3COOH + C_2H_5OH$. Strictly, this reaction depends on the concentrations of BOTH the ester and water, and should be second order overall (first order in each). However, water is used as the solvent and is present in vast molar excess compared to the ester, so as the reaction proceeds its concentration barely changes and can be treated as effectively constant.

   …

   🔒 Start your 14-day free trial to see the full solution →
4. CBSE 2026Set ANNUAL1 markMCQ
   Q.The value of rate constant of a pseudo-first-order reaction

   (a) depends on the concentration of reactants present in small amount

   (b) depends on the concentration of reactants present in excess

   (c) is independent of the concentration of the reaction

   (d) depends only on temperature

   ›Reveal solutionSolution

   A pseudo-first-order rate constant is not a true elementary-step constant — it already has the (essentially fixed) concentration of the reactant present in excess multiplied into it, so its numerical value depends on how much of that excess reactant was used.

   Example — acid-catalysed hydrolysis of ethyl acetate:

   $CH_3COOC_2H_5 + H_2O \xrightarrow{H^+} CH_3COOH + C_2H_5OH$

   The true rate law is $\text{rate}=k[\text{ester}][H_2O]$. Since water is the solvent and is present in huge excess, $[H_2O]$ stays essentially constant throughout the reaction, so $\text{rate}=k'[\text{ester}]$ where $k'=k[H_2O]$. Experimentally the reaction looks first order (only $[\text{ester}]$ appears), but the measured $k'$ is really the true rate constant $k$ multiplied by whatever fixed $[H_2O]$ happened to be present.

   Why the other options are wrong:

   • (a) It is the concentration of the reactant present in excess — not the one present in a small amount — that gets folded into $k_{obs}$. …

   🔒 Start your 14-day free trial to see the full solution →
5. CBSE 2025Set 56/6/11 markMCQ
   Q.For the following question, two statements are given — one labelled as Assertion (A) and the other labelled as Reason (R). Select the correct answer from the codes (A), (B), (C) and (D) as given below. (A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion (A). (B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A). (C) Assertion (A) is true, but Reason (R) is false. (D) Assertion (A) is false, but Reason (R) is true. Assertion (A) : Hydrolysis of an ester follows first order kinetics. Reason (R) : The concentration of water does not get altered much during the reaction.

   ›Reveal solutionSolution

   The assertion is true because ester hydrolysis is pseudo-first order; the reason correctly explains why — water is in large excess so its concentration stays nearly constant, making the observed kinetics first order.

   The Concept: Why First Order Kinetics Appears

   When you study reaction kinetics, the order of a reaction tells you how the rate depends on the concentrations of reactants. For a true bimolecular reaction like ester hydrolysis:

   $\text{CH}_3\text{COOC}_2\text{H}_5 + \text{H}_2\text{O} \xrightarrow{\text{H}^+} \text{CH}_3\text{COOH} + \text{C}_2\text{H}_5\text{OH}$

   The rate law should be:

   $\text{Rate} = k[\text{ester}][\text{H}_2\text{O}]$

   That would make it second order overall — first order in ester and first order in water. But here’s the twist: in practice, the reaction is carried out in aqueous solution where water is the solvent. Its concentration is about 55.5 M, while the ester concentration is typically 0.1 M or less. So water is in huge excess.

   Tip

   When one reactant is present in such large excess that its concentration changes negligibly during the reaction, we can treat it as constant. The rate law then appears to depend only on the other reactant — this is called pseudo-first order kinetics.

   Since $[\text{H}_2\text{O}]$ remains essentially constant, we absorb it into the rate constant:

   $\text{Rate} = k'[\text{ester}], \quad \text{where } k' = k[\text{H}_2\text{O}]$

   This is exactly the form of a first order reaction. So the assertion is correct — hydrolysis of an ester follows first order kinetics (under typical conditions).

   Step-by-Step Reasoning

   1. Identify the true order of the reaction.

      The balanced equation shows one molecule of ester reacts with one molecule of water. The fundamental rate law is second order: $\text{Rate} = k[\text{ester}][\text{H}_2\text{O}]$.

   2. Examine the reaction conditions.

      In a typical lab or exam context, ester hydrolysis is done in dilute aqueous solution. Water is the solvent — its initial concentration is ~55.5 M and it barely changes because only a tiny fraction is consumed.

   3. Apply the concept of excess reactant. …

   🔒 Start your 14-day free trial to see the full solution →
6. CBSE 2025Set X11 markMCQ
   Q.An example for pseudo first-order reaction is,

   (a) The decomposition of gaseous ammonia on a hot platinum surface

   (b) Photochemical reaction between hydrogen and chlorine

   (c) Inversion of cane sugar

   (d) Hydrogenation of ethene

   ›Reveal solutionSolution

   Inversion (hydrolysis) of cane sugar is the standard example of a pseudo first-order reaction — water is in large excess so its concentration is effectively constant.

   Hydrolysis of sucrose (cane sugar) into glucose and fructose:

   $\underset{\text{sucrose}}{\text{C}_{12}\text{H}_{22}\text{O}_{11}} + \text{H}_2\text{O} \xrightarrow{\text{H}^+} \underset{\text{glucose}}{\text{C}_6\text{H}_{12}\text{O}_6} + \underset{\text{fructose}}{\text{C}_6\text{H}_{12}\text{O}_6}$ …

   🔒 Start your 14-day free trial to see the full solution →
7. CBSE 2025Set A1 mark
   Q.Fill in the blank: The unit of a first order rate constant is ______.

   ›Reveal solutionSolution

   A first-order rate constant always has the unit of (time)⁻¹, e.g. s⁻¹.

   For a reaction of order $n$, the rate constant $k$ has general units of $(\text{mol L}^{-1})^{1-n}\,\text{time}^{-1}$. For a first-order reaction ($n=1$), the concentration term's exponent becomes zero, so the concentration unit cancels out completely, leaving only:

   …

   🔒 Start your 14-day free trial to see the full solution →
8. CBSE 2025Set ANNUAL1 markMCQ
   Q.What is the concentration of the reactant in a first order reaction, when the rate of the reaction is 0.6 Ms^-1 and the rate constant is 0.035 s^-1 ?

   (a) 26.667 M

   (b) 17.143 M

   (c) 26.183 M

   (d) 17.667 M

   ›Reveal solutionSolution

   For a first order reaction, Rate = k[R], so the reactant concentration is simply Rate divided by the rate constant.

   For a first order reaction:

   $\text{Rate} = k[R]$ …

   🔒 Start your 14-day free trial to see the full solution →
9. CBSE 2025Set ANNUAL1 markMCQ
   Q.The units of first order reaction:

   (a) s⁻¹

   (b) s

   (c) mol L⁻¹

   (d) L⁻¹s

   ›Reveal solutionSolution

   The rate constant of a first order reaction has units of (time)⁻¹, i.e. s⁻¹.

   For a general reaction of order $n$, rate $= k[A]^n$, so

   $k = \frac{rate}{[A]^n} = \frac{mol\,L^{-1}\,s^{-1}}{(mol\,L^{-1})^n}$

   For a first order reaction ($n=1$):

   …

   🔒 Start your 14-day free trial to see the full solution →
10. CBSE 2025Set ANNUAL1 markMCQ
    Q.Which one of the following is a pseudo first order reaction?

    (a) Hydrogenation of ethene

    (b) Hydrolysis of ethyl acetate in the presence of dilute acid

    (c) Combination of H2 and Br2

    (d) Decomposition of NH2 on a platinum surface

    ›Reveal solutionSolution

    Water, present in huge excess as solvent, has an essentially constant concentration during the ester's hydrolysis, so the true second-order rate law collapses to an apparent first-order one.

    The acid-catalyzed hydrolysis CH₃COOC₂H₅ + H₂O → CH₃COOH + C₂H₅OH is genuinely second order overall (first order in ester, first order in water), but since water is present in vast excess (it is essentially the solvent), its concentration barely changes during the reaction and gets absorbed into the rate constant, so the reaction experimentally behaves as first order — a pseudo …

    🔒 Start your 14-day free trial to see the full solution →
11. CBSE 2024Set ANNUAL1 markMCQ
    Q.The unit of rate constant for a first order reaction is -

    (a) $L^2 Sec^{-1}$

    (b) $Sec^{-1}$

    (c) $Mol\,L^{-1}Sec^{-1}$

    (d) $Mol^{-1}\,L\,Sec^{-1}$

    ›Reveal solutionSolution

    A first order rate constant has units of (time)$^{-1}$.

    …

    🔒 Start your 14-day free trial to see the full solution →
12. CBSE 2024Set D1 markMCQ
    Q.Which of the following is not a first order reaction?

    (a) CH3COOCH3 + H2O --H+--> CH3COOH + CH3OH

    (b) CH3COOC2H5 + NaOH -> CH3COONa + C2H5OH

    (c) 2H2O2 -> 2H2O + O2

    (d) 2N2O5 -> 4NO2 + O2

    ›Reveal solutionSolution

    Saponification of an ester by NaOH is second order; the other three are (pseudo/) first order.

    • (a) Acid hydrolysis of an ester (with H+ and large excess water) is a pseudo-FIRST-order reaction.
    • (b) Ester + NaOH (saponification) depends on both [ester] and [OH-], so rate = k[ester][OH-]: SECOND order.
    • (c) Decomposition of H2O2 (2H2O2 -> 2H2O + O2) is first order. …

    🔒 Start your 14-day free trial to see the full solution →