Q.Line joining the points (3,−4) and (−2,6) is perpendicular to the line joining the points (−3,6) and (9,−18).
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Perpendicular Slopes Condition
Perpendicular Slopes Condition
Imagine two roads crossing at a right angle — that's perpendicular lines. The question is: how do their slopes relate?
The Intuition
Take a line with slope 2. That means for every 1 unit you move right, you go up 2 units — a fairly steep climb. Now picture a line perpendicular to it. If the first line is climbing steeply, the perpendicular line must be falling gently, or climbing very shallowly in the opposite direction.
Why? Because a right angle means the two lines "flip" the rise and run. One line's steepness becomes the other's shallowness, but in the opposite sign.
Try this: a line with slope 2 (rise 2, run 1). A perpendicular line should have rise 1 and run −2 — that gives slope −21. Notice: 2×(−21)=−1.
That's the pattern: the slopes are negative reciprocals of each other.
The Precise Statement
m1⋅m2=−1
Two non-vertical lines are perpendicular if and only if the product of their slopes is −1.
Equivalently: m2=−m11 (provided m1=0).
What About Vertical and Horizontal Lines?
A vertical line has undefined slope. A horizontal line has slope 0. Their product? Undefined — not −1. Yet they are clearly perpendicular.
The formula m1⋅m2=−1 only works when both slopes are defined (neither line is vertical). For a vertical line (x=c) and a horizontal line (y=d), they are perpendicular by definition — no slope calculation needed.
Quick Check
Are y=3x+2 and y=−31x−5 perpendicular?
3×(−31)=−1. Yes.
Are y=4x and y=4x+1 perpendicular?
4×4=16=−1. No — they're parallel.
Why It Works (A Short Proof)
›Proof
Two lines with slopes m1 and m2 make angles θ1 and θ2 with the positive x-axis, where tanθ1=m1 and tanθ2=m2. …
Concept: Perpendicular Slopes Condition — two lines are perpendicular iff the product of their slopes is −1.
Step 1 – Slope of first line
m1=−2−36−(−4)=−510=−2
Step 2 – Slope of second line
m2=9−(−3)−18−6=12−24=−2
Step 3 – Check perpendicular condition …
The key idea is that two lines are perpendicular if the product of their slopes is −1. After computing the slopes, we find the product is (−2)×(−2)=4=−1, so the lines are not perpendicular.
The problem asks whether the line through (3,−4) and (−2,6) is perpendicular to the line through (−3,6) and (9,−18). To decide, we need the slopes of both lines and the perpendicular condition.
Why the Perpendicular Slopes Condition Works
Two lines are perpendicular (at right angles) if and only if the product of their slopes equals −1, provided neither line is vertical. This comes from geometry: if one line makes an angle θ with the horizontal, its slope is tanθ. A perpendicular line makes angle θ+90∘, and tan(θ+90∘)=−cotθ=−tanθ1. Multiplying gives tanθ×(−tanθ1)=−1.
For non-vertical lines L1 and L2 with slopes m1 and m2:
L1⊥L2⟺m1⋅m2=−1
A common mistake is to check if slopes are negative reciprocals without actually multiplying. Always compute the product — it's faster and avoids sign errors.
Step-by-Step Solution
1. Find the slope of the first line.
The slope formula for points (x1,y1) and (x2,y2) is:
m=x2−x1y2−y1
For (3,−4) and (−2,6):
m1=−2−36−(−4)=−56+4=−510=−2
So the first line has slope −2.
2. Find the slope of the second line.
For (−3,6) and (9,−18): …
Showing the 12 most recent of 26 on this concept.
- AP EAPCET 2026Set eng-2026-05-12-FN1 markMCQQ.A line L≡ax+6y+15=0 is perpendicular to the line passing through the points (−a,3) and (5,6). If the line bx+ay+k=0 is parallel to the line L=0, then a+3b= (A) 0 (B) 60 (C) 20 (D) 40
›Reveal solutionSolution
Use the perpendicularity condition to find a, then the parallelism condition between the two lines to find b.
Concept and Intuition
Two lines A1x+B1y+C1=0 and A2x+B2y+C2=0 are perpendicular iff A1A2+B1B2=0 (equivalently, product of slopes =−1), and parallel iff A1B2=A2B1 (equivalently, equal slopes, A1/A2=B1/B2). This problem chains both conditions: first perpendicularity pins down a, then parallelism (using that a) pins down b.
Step-by-Step Solution
- Slope of the line through (−a,3) and (5,6): 5−(−a)6−3=5+a3.
- Slope of L≡ax+6y+15=0: rewriting y=−6ax−615, slope =−6a.
- Perpendicularity: (−6a)⋅5+a3=−1⇒6(5+a)−3a=−1⇒−3a=−6(5+a)=−30−6a.
- −3a+6a=−30⇒3a=−30⇒a=−10.
- Now L≡−10x+6y+15=0. The line bx+ay+k=0 becomes bx−10y+k=0. …
- AP EAPCET 2026Set eng-2026-05-12-FN1 markMCQQ.A tangent L1 with slope m drawn to the parabola y2=8x is perpendicular to the normal L2 drawn to the parabola y2=12x. If m=1 and the point of intersection of L1 and L2 is (h,k), then h+k= (A) 2 (B) 4 (C) 9 (D) 6
›Reveal solutionSolution
Writing the tangent and normal in slope-form for their respective parabolas and using perpendicularity gives the intersection point (3.5,5.5), so h+k=9.
Concept and Intuition
For y2=4ax, the tangent of slope m is y=mx+a/m, and the normal of slope m is y=mx−2am−am3. Perpendicularity between L1 and L2 links their slopes via m1m2=−1.
Step-by-Step Solution
- y2=8x⇒4a=8⇒a=2. Tangent L1 with slope m=1: y=1⋅x+12=x+2.
- L1⊥L2⇒ slope of L2=−1/m=−1.
- y2=12x⇒4a=12⇒a=3. Normal L2 with slope −1: y=(−1)x−2(3)(−1)−3(−1)3=−x+6+3=−x+9. …
- AP EAPCET 2026Set eng-2026-05-13-AN1 markMCQQ.If A(2,12),B(5,12+3),C(3,12−3) are the vertices of a triangle ABC, then the ratio in which the perpendicular drawn through A divides the side BC is (A) 2:3 (B) 3:4 (C) 3:5 (D) 1:3
›Reveal solutionSolution
Drop the altitude from A onto BC; computing the foot D directly gives BD=3, DC=1 — the division ratio is 1:3.
Concept and Intuition
The perpendicular from a vertex to the opposite side is the altitude; its foot D splits the opposite side into two segments whose ratio we can get either by the foot's coordinates or, more directly, from the perpendicular-foot formula applied to the line BC.
Step-by-Step Solution
- Slope of BC: 3−5(12−3)−(12+3)=−2−23=3.
- Line BC: y−(12+3)=3(x−5)⇒3x−y+(12−43)=0.
- Foot of perpendicular from A(2,12): using x=x0−a2+b2a(ax0+by0+c), with a=3,b=−1,c=12−43: ax0+by0+c=23−12+12−43=−23, and a2+b2=4.
- x=2−3⋅4−23=2+46=3.5; y=12−(−1)⋅4−23=12−23. So D=(3.5,12−23).
- BD=(5−3.5)2+(3−(−23))2=1.52+(1.53)2=2.25+6.75=9=3. …
- AP EAPCET 2026Set eng-2026-05-13-AN1 markMCQQ.The equation of the normal to the parabola y2=16x which is perpendicular to the line 2x−y+5=0 is (A) x+2y+9=0 (B) x+2y−9=0 (C) x+2y+16=0 (D) x+2y−16=0
›Reveal solutionSolution
Find the normal to y2=16x perpendicular to a given line; answer is x+2y−9=0.
Concept and Intuition
A normal to y2=4ax at parameter t has a definite slope −t; matching that slope to the perpendicularity condition pins down t, and then the standard normal-line formula gives the equation.
Step-by-Step Solution
- Line 2x−y+5=0⇒y=2x+5 has slope m=2.
- "Perpendicular to this line" means the normal's slope is −21.
- For y2=16x=4ax, a=4. The normal at parameter t: y=−tx+2at+at3, whose slope is −t.
- Set −t=−21⇒t=21. …
- AP EAPCET 2026Set eng-2026-05-15-AN1 markMCQQ.The locus of the point which forms a right angled triangle with the fixed points (2, 3) and (5, 1) represents (A) a circle or a pair of parallel lines (B) a pair of parallel lines which are parallel to the line passing through the given points (C) a circle having the line joining the given points as a chord (D) the perpendicular bisector of the line joining the given points
›Reveal solutionSolution
This tests recognizing that "forms a right triangle" doesn't fix where the right angle is — it could be at any of the three vertices, giving a compound locus. Answer: a circle (Thales) union a pair of parallel lines (the two perpendiculars at the fixed points).
Concept and Intuition
A triangle is "right-angled" if any one of its three angles is 90°. With two vertices fixed at A=(2,3) and B=(5,1) and the third vertex P varying, we must consider each possible location of the right angle separately, then union the resulting loci — the full locus is the set of all P for which some vertex has a right angle.
Step-by-Step Solution
- Right angle at P: PA⋅PB=0. This is exactly Thales' theorem: P traces the circle having segment AB as its diameter.
- Right angle at A: AP⋅AB=0, i.e. AP⊥AB. So P lies anywhere on the line through A perpendicular to AB.
- Right angle at B: similarly, P lies on the line through B perpendicular to AB.
- The two lines from steps 2–3 are both perpendicular to the same line AB, hence parallel to each other. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If the image of the point P(2 , 3) in a line L is Q(4 , 5), then the image of the point R(0 , 0) in the same line is (A) (4 , 5) (B) (3 , 4) (C) (2 , 2) (D) (7 , 7)
›Reveal solutionSolution
The unknown mirror line L is recovered as the perpendicular bisector of P and its image Q; reflecting the origin in that recovered line gives (7,7).
Concept and Intuition
If Q is the reflection of P in a line L, then L must be the perpendicular bisector of segment PQ — this is exactly the defining property of a mirror reflection (the mirror line is equidistant from a point and its image, and perpendicular to the segment joining them). Once we know L explicitly, we can reflect any other point in it using the standard reflection formula.
Step-by-Step Solution
- P(2,3), Q(4,5). Midpoint of PQ=(3,4); this point lies on L.
- Slope of PQ=4−25−3=1. Since L⊥PQ, slope of L=−1.
- L:y−4=−1(x−3)⇒y=−x+7⇒x+y−7=0.
- Sanity check: reflect P(2,3) in x+y−7=0 using x′=x0−a2+b22a(ax0+by0+c) with a=b=1, c=−7: ax0+by0+c=2+3−7=−2, so x′=2−22(−2)=2+2=4, y′=3+2=5 — matches Q(4,5). ✓ …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.The points (h , k) , (1 , 2) and (−3 , 4) lie on the line L1. If a line L2 passing through the points (h , k) and (4 , 3) is perpendicular to the line L1, then hk= (A) 41 (B) 31 (C) −71 (D) −51
›Reveal solutionSolution
Using collinearity with L1 and perpendicularity of L2 gives two linear equations in h,k; solving them yields h=3, k=1, so k/h=1/3.
Concept and Intuition
Three points are collinear iff any two of the pairwise slopes match. Here (h,k) lies on the same line L1 as (1,2) and (−3,4), so its slope with either of those points must equal L1's slope. Separately, L2 (through (h,k) and (4,3)) being perpendicular to L1 pins down another relation between h and k — two equations, two unknowns.
Step-by-Step Solution
- Slope of L1 from (1,2) and (−3,4): m1=−3−14−2=−42=−21.
- Since (h,k) lies on L1 too, using (h,k) and (1,2): h−1k−2=−21⇒k=2−2h−1=25−2h. — (i)
- L2 through (h,k) and (4,3) is perpendicular to L1, so slope of L2=m1−1=2.
- 4−h3−k=2⇒3−k=8−2h⇒k=2h−5. — (ii) …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.If the lines 3x+y−4=0, x−αy+10=0, βx+2y+4=0 and 3x+y+k=0 represent the sides of a square, then αβ(k+4)2= (A) −256 (B) −512 (C) −128 (D) −1024
›Reveal solutionSolution
Identify the two parallel pairs forming the square, match slopes for perpendicularity, then equate the two side-lengths.
Concept and Intuition
A square's sides come in two parallel pairs, each pair perpendicular to the other, and all four sides equal in length. Matching slopes pins down α,β; matching perpendicular distances pins down k.
Step-by-Step Solution
- Line 1: 3x+y−4=0 (slope −3); Line 4: 3x+y+k=0 (slope −3) — these are one parallel pair.
- Line 2: x−αy+10=0 (slope 1/α); Line 3: βx+2y+4=0 (slope −β/2) must be perpendicular to slope −3, so both equal 1/3: 1/α=1/3⇒α=3; −β/2=1/3⇒β=−2/3.
- With α=3: Line 2 is x−3y+10=0. With β=−2/3: Line 3 becomes (after clearing fractions) x−3y−6=0.
- Distance between lines 2 & 3: 1+9∣10−(−6)∣=1016 — this is the square's side length. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.If 4x−3y−5=0 is a normal to the ellipse 3x2+8y2=k, then the equation of the tangent drawn to this ellipse at the point (−2,m) (m>0) is (A) 3x+4y−14=0 (B) 3x−4y+10=0 (C) 3x−4y+1=0 (D) 4x+3y−3=0
›Reveal solutionSolution
This tests the normal-to-ellipse condition (to fix k) followed by the tangent-to-ellipse formula at a specific point. The answer is 3x−4y+10=0.
Concept and Intuition
A normal line to a conic at a point is perpendicular to the tangent there. If we know one normal line (as an equation) and the conic's shape up to the unknown k, we can pin down both k and the point of contact by requiring: (i) the slope condition (normal slope from the conic matches the given line's slope), and (ii) the point actually lies on the given line.
Step-by-Step Solution
- Differentiate 3x2+8y2=k implicitly: 6x+16yy′=0⇒y′=−8y3x.
- At the point of tangency (x1,y1), the normal's slope is the negative reciprocal: 3x18y1.
- The given normal is 4x−3y−5=0, i.e. y=34x−35, slope 34. So 3x18y1=34⇒8y1=4x1⇒y1=2x1.
- Since (x1,y1) lies on the line: 4x1−3y1−5=0. Substituting y1=x1/2: 4x1−23x1=5⇒25x1=5⇒x1=2, y1=1.
- Since (2,1) lies on the ellipse: 3(4)+8(1)=k⇒k=20. So the ellipse is 3x2+8y2=20. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.If the line 5x−2y−6=0 is a tangent to the hyperbola 5x2−ky2=12, then the equation of the normal to this hyperbola at the point (6,b) (b<0) is (A) 6x+2y=0 (B) 26x+3y=3 (C) 6x−5y=21 (D) 36x−y=21
›Reveal solutionSolution
Using the tangency (discriminant=0) condition pins down k, then standard implicit differentiation gives the normal at the required point. The answer is 6x−5y=21.
Concept and Intuition
A line is tangent to a conic exactly when substituting it into the conic's equation produces a quadratic with a repeated root, i.e. discriminant zero. This is the most reliable way to extract an unknown parameter from a tangency statement, more robust than guessing a point first.
Step-by-Step Solution
- From 5x−2y−6=0, y=25x−6.
- Substitute into 5x2−ky2=12: 5x2−k(25x−6)2=12. Multiply by 4: 20x2−k(25x2−60x+36)=48.
- Rearranged: (20−25k)x2+60kx−(36k+48)=0.
- Tangency ⇒ discriminant =0: (60k)2+4(20−25k)(36k+48)=0.
- Expand (20−25k)(36k+48)=−900k2−480k+960. So 3600k2+4(−900k2−480k+960)=0⇒−1920k+3840=0⇒k=2.
- Hyperbola is 5x2−2y2=12. At (6,b): 5(6)−2b2=12⇒2b2=18⇒b2=9; since b<0, b=−3. …
- AP EAPCET 2024Set eng-2024-05-19-AN1 markMCQQ.The point (a,b) is the foot of the perpendicular drawn from the point (3,1) to the line x+3y+4=0. If (p,q) is the image of (a,b) with respect to the line 3x−4y+11=0, then ap+bq= (A) −3 (B) −5 (C) 3 (D) 7
›Reveal solutionSolution
First find the foot of perpendicular (a,b)=(2,−2) from (3,1) to the given line, then reflect it across the second line to get (p,q)=(−4,6); the requested expression evaluates to −5.
Concept and Intuition
Two standard line-geometry formulas are chained: (1) the foot of perpendicular from a point to a line, and (2) the reflection (image) of a point in a line. Both use the same building block A2+B2Ax1+By1+C.
Step-by-Step Solution
- Foot of perpendicular from (3,1) to x+3y+4=0 (A=1,B=3,C=4): Ax1+By1+C=3+3+4=10, A2+B2=10, ratio =1. (a,b)=(3,1)−1⋅(1,3)=(2,−2).
- Check: 2+3(−2)+4=2−6+4=0 ✓, so (2,−2) indeed lies on the line.
- Reflect (a,b)=(2,−2) in 3x−4y+11=0 (A=3,B=−4,C=11): Ax1+By1+C=6+8+11=25, A2+B2=25, ratio =1. (p,q)=(2,−2)−2⋅1⋅(3,−4)=(2−6,−2+8)=(−4,6). …
- AP EAPCET 2024Set eng-2024-05-20-AN1 markMCQQ.If the line 2x−3y+5=0 is the perpendicular bisector of the line segment joining (1,−2) and (α,β), then α+β= (A) 7 (B) 1 (C) −1 (D) −7
›Reveal solutionSolution
A perpendicular bisector gives two conditions: the midpoint lies on the line, and the segment is perpendicular to it. Solving both gives α+β=1.
Concept and Intuition
'Line L is the perpendicular bisector of segment PQ' means two things simultaneously: (1) the midpoint of PQ lies on L, and (2) PQ⊥L. Both give linear equations in the unknown endpoint.
Step-by-Step Solution
- Midpoint of (1,−2) and (α,β) is (21+α,2−2+β); it lies on 2x−3y+5=0: 2⋅21+α−3⋅2β−2+5=0⇒(1+α)−23(β−2)+5=0.
- (1+α)−1.5β+3+5=0⇒α−1.5β+9=0⇒α−1.5β=−9. — (I)
- Line 2x−3y+5=0 has slope 2/3; the perpendicular segment has slope −3/2.
- Slope of segment joining (1,−2) and (α,β): α−1β+2=−23⇒2(β+2)=−3(α−1)⇒2β+4=−3α+3⇒3α+2β=−1. — (II) …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.