Q.The electronic configuration of Cu(II) is 3d9 whereas that of Cu(I) is 3d10. Which of the following is correct?
Concept understanding — Stability of Oxidation States
Stability of Oxidation States – From Intuition to Precision
Imagine you're holding a ball on a hill. If you place it exactly at the top, it's balanced — but the slightest push sends it rolling down. That's an unstable position. If you place it in a small dip on the hillside, it stays put even if nudged — that's stable. Oxidation states work the same way: some are like the hilltop (easily changed), others like the dip (hard to change).
The Core Intuition
An oxidation state is just a number we assign to an atom to track how many electrons it has gained or lost compared to its neutral state. But atoms don't "want" to stay in arbitrary oxidation states — they want to reach a configuration that minimises their energy.
Stability here means: how reluctant is that oxidation state to change under normal conditions? A stable oxidation state resists being oxidised further or reduced further. An unstable one readily changes into something else.
The Precise Statement
Stability of an oxidation state refers to the tendency of an element to maintain that particular oxidation state under given conditions (temperature, pH, presence of other reagents). A stable oxidation state is one that does not easily undergo redox reactions — it is neither easily oxidised nor easily reduced.
This depends on three key factors:
- Electronic configuration – Half-filled and fully-filled d or f subshells confer extra stability (e.g., Fe3+ with d5 is more stable than Fe2+ with d6 in some contexts).
- Inert pair effect – Heavier p-block elements (like Tl, Pb, Bi) show lower oxidation states (e.g., +1 for Tl) as more stable than higher ones (+3 for Tl), because the s-electrons become reluctant to participate.
- Disproportionation tendency – Some oxidation states are unstable because they spontaneously convert into two other states (e.g., Cu+ in aqueous solution gives Cu2+ and Cu).
Stability is relative — it depends on the environment. Mn2+ is stable in acidic solution but easily oxidised in alkaline medium. Always specify conditions when discussing stability.
Examples That Make It Concrete
Transition metals – Cr3+ (d3) and Mn2+ (d5) are exceptionally stable because half-filled/half-filled-like configurations have low energy. Cr2+ (d4) is easily oxidised to Cr3+ — it's unstable.
p-block elements – Pb2+ is stable, Pb4+ is a strong oxidising agent (unstable). Sn2+ is a reducing agent (easily oxidised to Sn4+), so Sn4+ is more stable for tin.
Common pattern – For most elements, the most common oxidation state is the most stable one under standard conditions. But "most common" isn't always "most stable" — e.g., Fe3+ is common but Fe2+ is more stable in acidic solution.
Do not confuse "stability" with "occurrence". Mn7+ (as MnO4−) is common in the lab but is a powerful oxidising agent — it is not stable in the sense of resisting change. It readily accepts electrons.
How to Think About It in Exams
When asked "Explain the stability of oxidation states of [element]", follow this mental checklist:
- Write the electronic configuration of the atom.
- Write configurations for each possible oxidation state.
- Look for half-filled, fully-filled, or inert pair effects.
- Check if the state can disproportionate (common for +1 states of Cu, Au, and +3 states of Mn).
- Mention the medium (acidic/alkaline) if relevant.
For d-block elements, remember: d0, d5, and d10 are especially stable. For p-block, the inert pair effect makes lower oxidation states more stable as you go down the group.
The Bottom Line
Stability of an oxidation state is a measure of how strongly an atom holds onto that oxidation number — how hard it is to push it up or down. It's determined by electronic structure, the element's position in the periodic table, and the chemical environment. Master this, and you'll predict redox behaviour without memorising every reaction.
Stability of oxidation states among transition and inner-transition elements is discussed in the NCERT/CBSE Class 12 Chemistry chapter on d- and f-Block Elements, and ‘stability of oxidation states in transition elements’ is a frequently searched important-question topic for board exams, JEE Main and NEET. Predicting which oxidation state is most stable is a reasoning skill regularly tested in competitive-exam inorganic chemistry MCQs.
Why this formula?
Stability of Oxidation States: Why It Works
This concept explains why certain oxidation states of an element are more stable than others — and why some states are never observed at all.
The Core Idea: Energy Minimisation
An oxidation state is stable when the total energy of the system is at a minimum. This depends on three competing factors:
- Ionisation energy (energy needed to remove electrons)
- Lattice energy (for ionic compounds) or bond energy (for covalent compounds)
- Electronic configuration (half-filled / fully-filled subshells)
There is no single formula for stability — instead, we use trends and principles that act as "formulae" for prediction.
Key Principle 1: Inert Pair Effect (for p-block elements)
Why it holds:
For heavier elements (e.g., Tl, Pb, Bi), the 6s² electrons are held very tightly due to poor shielding and relativistic effects. They resist removal.
- Result: Lower oxidation state (e.g., +1 for Tl, +2 for Pb) becomes more stable than the higher state (+3, +4).
- Example: TlX3+ is a strong oxidising agent — it readily gains two electrons to become TlX+.
Derivation logic:
The energy cost to remove the 6s² electrons is greater than the energy gained by forming additional bonds or lattice. So the system stays in the lower state.
Key Principle 2: Half-Filled / Fully-Filled Subshell Stability
Why it holds:
A half-filled (d5, f7) or fully-filled (d10, f14) subshell has extra exchange energy and symmetry — making it unusually stable.
- Example: MnX2+ (d5) is more stable than MnX3+ (d4). FeX3+ (d5) is more stable than FeX2+ (d6).
Derivation logic:
The exchange energy (Hund's rule) is maximum for half-filled configurations. Removing an electron from a half-filled shell costs extra energy — so the half-filled state is favoured.
Key Principle 3: Lattice Energy / Hydration Energy Compensation
For transition metals, stability of a particular oxidation state in aqueous solution depends on:
ΔG∘=ΔHhydration∘−ΔHionisation∘
Why it holds:
- Higher oxidation states have higher ionisation energy (harder to remove electrons).
- But they also have higher hydration energy (smaller, more charged ions attract water more strongly).
- The balance determines which state is stable.
Example:
- CuX+ is unstable in water because its hydration energy is too low to compensate for the loss of the second electron.
- CuX2+ is stable in water.
Key Principle 4: Disproportionation
Some oxidation states are unstable and spontaneously convert to two other states:
2CuX+Cu+CuX2+
Why it holds:
The free energy change ΔG∘ for the reaction is negative. This happens when the intermediate oxidation state is less stable than the extremes.
Formula (for aqueous ions):
If Ereduction∘ for the higher state is more positive than for the lower state, disproportionation is spontaneous.
Summary Table: Why Each "Formula" Holds
| Principle | Why it works | Key exam example |
|---|---|---|
| Inert pair effect | 6s² electrons are too tightly bound | PbX2+ stable, PbX4+ oxidising |
| Half-filled stability | Extra exchange energy | MnX2+ > MnX3+ |
| Hydration vs ionisation | Energy balance in solution | CuX2+ stable, CuX+ not |
| Disproportionation | ΔG<0 for intermediate state | CuX+ in water |
Final Takeaway for Exams
Never memorise stability blindly. Always ask:
- Is the electronic configuration special? (half-filled / inert pair)
- Is the medium aqueous or solid? (hydration vs lattice)
- Does the element belong to a heavier group? (inert pair effect)
The "formula" is really a balance of energies — and the reasoning is what gets you marks.
The key idea is that stability depends on more than just a filled d-subshell — it also involves hydration energy and lattice energy effects.
Step 1: Cu(I) has a 3d10 configuration, which is fully filled and appears stable. Cu(II) has 3d9, an incomplete subshell.
Step 2: In aqueous solution, Cu(II) is more stable because its higher charge (+2) gives a much larger hydration energy, which compensates for the loss of a filled d-shell.
Step 3: In the solid state, Cu(II) compounds often have higher lattice energies. Overall, Cu(II) is the more common and stable oxidation state in most conditions.
Cu(II) is more stable than Cu(I) in aqueous medium.
The key idea is that while a fully filled 3d10 subshell (Cu(I)) is stable, the higher charge and smaller size of Cu(II) give it a much larger hydration enthalpy in aqueous solution, which more than compensates for the energy cost of removing an extra electron. In aqueous medium, Cu(II) is more stable than Cu(I).
-
Start with the electronic configurations.
Cu(I) has the configuration 3d10 — a completely filled d-subshell. Cu(II) has 3d9 — one electron short of a full d-subshell. A filled subshell is inherently more stable due to exchange energy and symmetry. So, in the gas phase, Cu(I) is more stable than Cu(II). If the question were about gaseous ions, Cu(I) would win.
-
But the real world is not the gas phase — it's aqueous solution.
Most common chemistry of copper happens in water. Here, the stability of an ion depends not just on its electronic configuration, but also on its hydration enthalpy — the energy released when water molecules surround the ion. The hydration enthalpy depends on two factors: charge and ionic radius. Higher charge and smaller size both increase hydration enthalpy.
-
Compare Cu(I) and Cu(II) in terms of charge and size.
Cu(II) has a +2 charge, while Cu(I) has only +1. Also, Cu(II) has a smaller ionic radius (about 73 pm) compared to Cu(I) (about 96 pm). The combination of higher charge and smaller size means Cu(II) has a much larger hydration enthalpy than Cu(I).
-
The energy balance.
To go from Cu(I) to Cu(II), you need to remove one more electron — that costs ionization energy. But the huge hydration enthalpy of Cu(II) more than makes up for this cost. The net result is that in water, Cu(II) is thermodynamically more stable than Cu(I).
-
Evidence from disproportionation.
Cu(I) in aqueous solution spontaneously disproportionates:
2Cu+(aq)→Cu(s)+Cu2+(aq)
This reaction is thermodynamically favorable (positive E∘), which directly shows that Cu(II) is more stable than Cu(I) in water.
A common mistake is to stop at the electronic configuration and conclude that Cu(I) with 3d10 must be more stable. That is true only for gaseous ions. In solution, the hydration effect reverses the stability order.
For transition metals, always check the medium. In aqueous solution, higher oxidation states are often stabilized by hydration or complexation, even if the gas-phase configuration suggests otherwise.
The correct option is (i) Cu(II) is more stable.
Method: Stability Analysis Using Electronic Configuration & Hydration Energy
Step 1: Compare electronic configurations
- Cu(I) → 3d10 → fully filled d-subshell (stable configuration)
- Cu(II) → 3d9 → one electron less than fully filled
At first glance, Cu(I) appears more stable due to the completely filled d-orbital.
Step 2: Consider the real-world stability in aqueous medium
In aqueous solution, Cu(II) is more stable than Cu(I). Why?
- Cu(II) has higher charge (+2) and smaller ionic radius than Cu(I).
- This leads to much higher hydration enthalpy for Cu(II), which compensates for the loss of the stable 3d10 configuration.
Step 3: Check disproportionation tendency
Cu(I) in aqueous solution undergoes disproportionation:
2Cu+→Cu+Cu2+
This reaction is spontaneous, confirming that Cu(II) is more stable in solution.
Step 4: Conclusion
Despite the fully filled 3d10 configuration of Cu(I), the higher hydration energy of Cu(II) makes it the more stable oxidation state in aqueous medium.
Correct option: (i) Cu(II) is more stable
Here are the common mistakes students make on this question, along with how to avoid each.
Mistake 1: Assuming Full d-subshell Always Means Higher Stability
- The Mistake: Students see that Cu(I) has a 3d10 configuration (completely filled d-subshell) and immediately assume it must be more stable than Cu(II) with 3d9. They pick option (ii) "Cu(II) is less stable" without further thought.
- Why it's Wrong: While a fully filled d-subshell does provide extra stability, it is not the only factor. In transition metals, the hydration enthalpy (energy released when ions dissolve in water) and lattice energy (for solid compounds) often outweigh the stability gained from a filled d-subshell.
- How to Avoid: Remember the "exceptions" in transition metal chemistry. For copper, Cu(II) is actually more stable in aqueous solution and in most of its salts. Always check the real-world behavior of the element, not just the theoretical electron configuration.
Mistake 2: Ignoring the Role of Hydration Enthalpy
- The Mistake: Students forget to consider what happens when the ion is in solution. They treat the stability as an isolated property of the ion in a vacuum.
- Why it's Wrong: The question is about stability in a general chemical context. Cu(II) has a higher charge (+2) and a smaller ionic radius than Cu(I). This means it has a much higher hydration enthalpy (the energy released when water molecules surround the ion). This large energy release compensates for the loss of the filled d-subshell, making Cu(II) more stable in water.
- How to Avoid: When comparing stability of different oxidation states of transition metals, always ask: "What is the environment?" For aqueous solutions, higher charge density often leads to greater stability due to hydration energy. Write down the formula: Stability = (Electronic Configuration Stability) + (Hydration/Lattice Energy).
Mistake 3: Confusing "Stability" with "Ease of Formation"
- The Mistake: Students think that because Cu(I) is formed first (e.g., from Cu metal), it must be more stable.
- Why it's Wrong: Cu(I) is often an intermediate that quickly disproportionates (self-oxidizes and reduces) into Cu(II) and Cu metal. The fact that Cu(I) is hard to isolate in water shows it is less stable under those conditions.
- How to Avoid: Understand that stability refers to the tendency of a species to remain as it is, not how easily it is formed. A species can be formed easily but be highly unstable (like Cu(I) in water). Focus on the final, predominant species.
Mistake 4: Misinterpreting the "d^10" Exception
- The Mistake: Students overgeneralize the stability of d10 configurations. They apply it blindly to all elements (e.g., Zn, Cd, Hg) and assume it works the same for copper.
- Why it's Wrong: For Zn, d10 is indeed the most stable state (+2). But for Cu, the +2 state is more stable despite having d9. The difference is that Cu has a smaller nuclear charge and different ionic radii, making the +2 state energetically favorable in water.
- How to Avoid: Treat each element as a unique case. Memorize the key exceptions: Cu(II) > Cu(I) in water, Fe(III) > Fe(II) in some complexes, etc. Don't rely on a single rule for all transition metals.
The Correct Answer and Why
The correct answer is (i) Cu(II) is more stable.
- Reason: In aqueous solution and in most of its compounds, Cu(II) is more stable than Cu(I) due to the much higher hydration enthalpy of Cu(II) (which has a higher charge and smaller size). This energy gain outweighs the stability provided by the 3d10 configuration of Cu(I). Cu(I) compounds often disproportionate in water to give Cu(II) and Cu metal.
Key Takeaway: For copper, Cu(II) is the more stable oxidation state in water, despite having an incomplete d-subshell. Always consider the environment (aqueous vs. solid) and the energy contributions from hydration or lattice formation.
- AP EAPCET 2026Set eng-2026-05-18-FN1 markMCQQ.Identify the pair of ions which act as good reducing agents (A) Ce4+,Yb2+ (B) Ce4+,Tb4+ (C) Ce3+,Tb2+ (D) Eu2+,Yb2+
›Reveal solutionSolution
This tests which unusual lanthanide oxidation states behave as reducing vs oxidising agents; Eu2+ and Yb2+ are the textbook pair of reducing agents, so the answer is (D).
Concept and Intuition
Lanthanides normally exist as Ln3+. A few elements also show +2 or +4 states when that unusual state happens to correspond to an especially stable f0, f7 (half-filled) or f14 (fully-filled) configuration. But "isolable" is not the same as "thermodynamically preferred" — the normal +3 state is still the most stable overall for the element, so:
- An unusual +4 ion (higher than normal +3) tends to gain an electron and fall back to +3 — it therefore acts as an oxidising agent (itself gets reduced). Examples: Ce4+ (4f0→4f1), Tb4+ (4f7→4f8).
- An unusual +2 ion (lower than normal +3) tends to lose an electron and rise back to +3 — it therefore acts as a reducing agent (itself gets oxidised). Examples: Eu2+ (4f7→4f6), Yb2+ (4f14→4f13), and (more weakly) Sm2+.
Step-by-Step Solution
- Identify each ion's usual/unusual character: Ce4+ (unusual +4, oxidiser), Tb4+ (unusual +4, oxidiser), Eu2+ (unusual +2, reducer), Yb2+ (unusual +2, reducer).
- Option (A) Ce4+,Yb2+ — mixes an oxidiser with a reducer, not a matching pair.
- Option (B) Ce4+,Tb4+ — both are oxidising agents, not reducing.
- Option (C) Ce3+,Tb2+ — Ce3+ is just the normal, unremarkable state, and Tb2+ is not a standard/stable species discussed for this behaviour.
- Option (D) Eu2+,Yb2+ — both are unusual +2 ions stabilised by f7/f14 that readily give up an electron to reach the normal Ln3+ state, i.e. both are genuine reducing agents. This is the correct pair.
Common Mistakes
- Confusing which direction (oxidation vs reduction) the special f0/f7/f14 stability drives the ion — remember it is the product Ln3+ state that is thermodynamically normal, so unusual +4 ions get reduced (oxidisers) and unusual +2 ions get oxidised (reducers).
- Mixing up Ce (which shows +4) with Eu/Yb/Sm (which show +2).
✓Final answerThe correct option is (D) — Eu2+,Yb2+.
ANSWER: D
- AP EAPCET 2026Set ap-2026-05-20-AN1 markMCQQ.Which pair of ions act as strong reducing agents? (A) Ce4+,Tb4+ (B) Eu2+,Yb2+ (C) Gd3+,Lu3+ (D) La3+,Pm3+
›Reveal solutionSolution
Eu2+ and Yb2+ are strong reducing agents because oxidising to the common +3 lanthanide state gives them extra electronic stability.
Concept and Intuition
Lanthanides are overwhelmingly found in the +3 oxidation state. Ions that deviate from +3 tend to revert to it if doing so gives a specially stable electron configuration (empty, half-filled, or fully-filled f subshell). Eu2+ (4f7, half-filled — already quite stable) still readily loses an electron to Eu3+ (4f6) — actually, more precisely, the drive is that +2 ions with configurations one electron short of a stable count are pushed to lose an electron toward +3, or +4 ions are pulled to gain one toward +3. The exam-relevant memorised fact: Eu2+ and Sm2+ (and here, Yb2+, which is 4f14, fully filled) act as reducing agents by oxidising to +3, while Ce4+ and Tb4+ act as oxidising agents by being reduced to the stable +3 state (Ce3+ is 4f0; Tb3+ is 4f8/near half-filled +1 pattern that's more stable than Tb4+).
Step-by-Step Solution
- Recall the standard exceptions to +3 among lanthanides: Ce4+,Pr4+,Tb4+ (oxidising agents, reduce to +3) and Eu2+,Sm2+,Yb2+ (reducing agents, oxidise to +3).
- Option (A) Ce4+,Tb4+ — both oxidising agents, not reducing.
- Option (B) Eu2+,Yb2+ — both are the classic reducing-agent pair among lanthanide ions.
- Options (C) and (D) list ions already in the common, stable +3 state (Gd3+, Lu3+, La3+, Pm3+), which show no special redox activity.
- Hence (B) is correct.
Common Mistakes
- Mixing up which unusual oxidation states are oxidising agents (the +4 ions) versus reducing agents (the +2 ions).
- Assuming Gd3+ or La3+ (already stable +3) have any special reducing/oxidising character.
✓Final answerThe correct option is (B) — Eu2+,Yb2+.
ANSWER: B
- AP EAPCET 2025Set eng-2025-05-22-FN1 markMCQQ.How many of the following lanthanide elements exhibit +4 oxidation state ? Ce,Pr,Nd,Pm,Sm,Eu,Gd,Tb,Dy (A) 5 (B) 4 (C) 3 (D) 6
›Reveal solutionSolution
Tests which lanthanides depart from the dominant +3 state to also show +4, based on electronic-configuration stability.
Concept and Intuition
Lanthanides are overwhelmingly +3 because that oxidation state matches a filled 6s/5d loss while leaving a reasonably stable 4f configuration. A few members show +4 (or +2) only when losing (or gaining) one more electron gets them to, or close to, an empty (f0), half-filled (f7), or fully-filled (f14) 4f sub-shell — extra stability that offsets the higher ionisation energy.
Step-by-Step Solution
- Ce (4f¹5d¹6s²): losing one more electron beyond +3 gives Ce⁴⁺ with f0 — very stable, +4 is in fact its best-known state (e.g., CeO2).
- Pr and Nd: Pr⁴⁺ (f1) and Nd⁴⁺ (f2) are known, though less stable than Ce⁴⁺ (e.g., PrO2, and Nd⁴⁺ in a few solid oxides).
- Pm: radioactive, poorly characterised; +4 not established.
- Sm, Eu: these instead favour +2 (f6 close to half-filled for Sm²⁺, and f7 half-filled exactly for Eu²⁺) — the opposite direction, not +4.
- Gd: Gd³⁺ is already f7 (half-filled, maximally stable); removing a further electron destroys this stability, so Gd⁴⁺ is not favoured.
- Tb: Tb³⁺ is f8; going to Tb⁴⁺ gives f7 (half-filled) — favourable, so Tb⁴⁺ is well known (e.g., TbO2).
- Dy: Dy⁴⁺ (f8) is known, though less common, in a few compounds.
- Count: Ce, Pr, Nd, Tb, Dy = 5.
Common Mistakes
- Including Sm or Eu, which are famous for +2, not +4.
- Including Gd, whose f⁷ stability is at +3, not +4.
✓Final answerThe correct option is (A) — 5.
ANSWER: A
- AP EAPCET 2023Set eng-2023-05-19-FN1 markMCQQ.Identify the correct statement (A) Yb2+ is an oxidant (B) Lu3+ is paramagnetic (C) CrO is basic (D) Brass is an alloy of Cu, Sn
›Reveal solutionSolution
Of the four statements, only "CrO is basic" is correct — the others misstate Yb2+'s redox role, Lu3+'s magnetism, and brass's composition.
Concept and Intuition
This question tests several standard d- and f-block facts together: (i) lanthanide ions in unusual oxidation states tend to revert to the characteristic, most stable +3 state, so Eu2+/Yb2+ act as reducing agents (they get oxidized to +3) while Ce4+/Tb4+ act as oxidizing agents (they get reduced to +3);
(ii) magnetism of lanthanide ions follows from unpaired 4f electrons — a fully-filled or fully-empty 4f subshell is diamagnetic;
(iii) the acid-base character of transition-metal oxides follows their oxidation state — low oxidation states give basic oxides, high oxidation states give acidic oxides, with intermediate ones amphoteric;
(iv) common alloy compositions (brass vs bronze) are a factual recall point.
Step-by-Step Solution
- (A) Yb2+: has configuration 4f14 (fully filled, stable), so it readily loses an electron to attain the general lanthanide-favoured Yb3+ state — meaning Yb2+ itself gets oxidized, i.e. it is a reducing agent, not an oxidant. Statement false.
- (B) Lu3+: Lu (Z=71) is [Xe]4f145d16s2; removing 3 electrons (5d1,6s2) gives Lu3+=[Xe]4f14 — completely filled 4f, hence diamagnetic, not paramagnetic. Statement false.
- (C) CrO: chromium here is in the low +2 oxidation state. Per the general trend (lower oxidation state ⇒ more ionic/basic oxide; e.g. MnO basic, Mn2O7 acidic), CrO is basic, Cr2O3 amphoteric, CrO3 acidic. Statement true.
- (D) Brass is an alloy of copper and zinc (bronze is the Cu–Sn alloy), so "Brass is an alloy of Cu, Sn" is false.
- Only (C) survives as correct.
Common Mistakes
- Assuming any unusual +2/+4 lanthanide ion is automatically an "oxidant" without checking which direction (toward or away from +3) it actually shifts.
- Mixing up brass (Cu-Zn) and bronze (Cu-Sn) — a very common recall error.
✓Final answerThe correct option is (C) — CrO is basic.
ANSWER: C
- AP EAPCET 2022Set eng-2022-07-08-AN1 markMCQQ.For which of the following +3 oxidation state is highly oxidizing in character? (A) Al (B) Ga (C) In (D) Tl
›Reveal solutionSolution
The inert pair effect is strongest for the heaviest Group 13 element, thallium, making its +3 oxidation state a strong oxidizer that is readily reduced to the more stable +1 state.
Concept and Intuition
Going down Group 13 (B, Al, Ga, In, Tl), the ns² electron pair becomes increasingly reluctant to participate in bonding due to poor shielding by intervening d/f electrons and relativistic contraction of the ns orbital — this is the "inert pair effect". Consequently, the +1 oxidation state (where the ns² pair stays un-ionized) becomes progressively more stable relative to +3 as we move down the group. For Al and Ga, the +3 state is the dominant, stable state. For Tl, the inert pair effect is so pronounced that +1 is actually the more stable oxidation state, which means Tl(III) compounds are strong oxidizing agents — they are readily reduced to Tl(I), releasing energy in the process.
Step-by-Step Solution
- Rank the inert pair effect across Al, Ga, In, Tl — it strengthens down the group, being negligible for Al and dominant for Tl.
- For Al, +3 is essentially the only common, stable oxidation state (Al³⁺ is not oxidizing).
- For Ga and In, +3 is still the more stable state, with +1 being a minor, less common state.
- For Tl, +1 becomes more stable than +3, so Tl3+ species act as oxidizing agents, spontaneously accepting electrons to become Tl+.
- Hence the element whose +3 state is highly oxidizing is Tl.
Common Mistakes
- Applying the inert pair effect uniformly to all Group 13 elements instead of recognizing it strengthens down the group.
- Confusing "oxidizing +3 state" with "the +3 state being unstable/non-existent" — Tl(III) compounds do exist, they are just strongly oxidizing.
✓Final answerThe correct option is (D) — Tl.
ANSWER: D
- AP EAPCET 2021Set ap-2021-10-05-FN1 markMCQQ.Which among the following is the strongest oxidizing agent? (A) SnO2 (B) SiO2 (C) GeO2 (D) PbO2
›Reveal solutionSolution
The inert-pair effect destabilises Pb(IV) relative to Pb(II), making PbO2 a strong oxidising agent — the strongest among SnO2, SiO2, GeO2, PbO2.
Concept and Intuition
Down group 14, the ns² electron pair becomes increasingly reluctant to participate in bonding (the inert-pair effect), so the lower oxidation state (+2) becomes progressively more stable relative to the group oxidation state (+4) as you go from C to Pb. This means Pb4+ compounds readily oxidise other species while being reduced to the more stable Pb2+.
Step-by-Step Solution
- SiO2, GeO2: silicon and germanium show little inert-pair effect; +4 is their stable, common state, so these oxides are not strong oxidisers.
- SnO2: tin shows a mild inert-pair effect; Sn4+ is reasonably stable, only a weak oxidiser.
- PbO2: lead shows the strongest inert-pair effect in the group; Pb4+ is markedly less stable than Pb2+, so PbO2 readily gets reduced (e.g. to PbO or Pb2+), acting as a powerful oxidising agent (used in lead-acid batteries, oxidimetric analysis).
- Hence PbO2 is the strongest oxidising agent of the four.
Common Mistakes
- Assuming all group-14 dioxides behave similarly just because they share the same formula type MO2.
✓Final answerThe correct option is (D) — PbO2.
ANSWER: D
- AP EAPCET 2021Set eng-2021-08-19-AN1 markMCQQ.The incorrect statement among the following is /are ________ (A) NCl5 does not exist while PCl5 does (B) Pb prefers to form tetravalent compounds (C) The three C−O bonds are equal in the CO32− ion (D) Both O2+ and NO are paramagnetic
›Reveal solutionSolution
The inert-pair effect makes lead prefer the +2 (divalent) oxidation state, not +4 (tetravalent) — so the claim that "Pb prefers to form tetravalent compounds" is the incorrect statement.
Concept and Intuition
Going down Group 14, the heavier elements' ns2 electron pair becomes increasingly reluctant to participate in bonding (the inert-pair effect, due to poor shielding by intervening d/f electrons and relativistic contraction of the ns orbital). This makes the lower oxidation state progressively more stable for heavier members: Sn shows both +2 and +4 fairly readily, but Pb strongly favours +2 (PbO, PbCl2, Pb(NO3)2 are common; Pb4+ compounds like PbO2 are comparatively strong oxidizers/less stable).
Step-by-Step Solution
- (A) NCl5 does not exist (N has no accessible d orbitals to expand its octet beyond 4 bonds) while PCl5 does (P can use 3d orbitals) — this is a correct/true statement.
- (B) "Pb prefers to form tetravalent compounds" — false; due to the inert-pair effect Pb actually prefers divalent compounds. This is the incorrect statement.
- (C) In CO32−, resonance delocalizes the double-bond character equally over all three C–O bonds, making them identical in length — true.
- (D) O2+ (one unpaired electron in π∗) and NO (one unpaired electron) are both paramagnetic — true.
- Hence the incorrect statement is (B).
Common Mistakes
- Confusing Sn's and Pb's preferred oxidation states — it's Sn that more readily forms tetravalent (+4) compounds, while Pb is the one favouring +2.
✓Final answerThe correct option is (B) — "Pb prefers to form tetravalent compounds" is incorrect; Pb actually prefers divalent compounds due to the inert-pair effect.
ANSWER: B
- AP EAPCET 2021Set eng-2021-08-24-FN1 markMCQQ.The stability of +1 oxidation state increases in the sequence ________ (A) Ga<In<Al<Tl (B) Al<Ga<In<Tl (C) Tl<In<Ga<Al (D) In<Tl<Ga<Al
›Reveal solutionSolution
The inert-pair effect grows down group 13, making the +1 oxidation state progressively more stable: least for Al, most for Tl.
Concept and Intuition
The inert-pair effect describes the reluctance of the outermost ns2 electron pair to participate in bonding as atomic number increases down a group, due to poor shielding by intervening d/f electrons and relativistic effects for heavier elements. In group 13, this makes the +1 oxidation state (retaining the ns2 pair, only losing the single p electron) increasingly favoured relative to +3 as you go down the group.
Step-by-Step Solution
- Al: +3 is overwhelmingly the stable/common oxidation state; +1 compounds are rare and unstable.
- Ga: +1 exists but is less stable than +3; +3 still dominant.
- In: +1 and +3 are both reasonably common, with +1 gaining stability.
- Tl: +1 is actually the more stable oxidation state (Tl+ compounds are more stable than Tl3+), the culmination of the inert-pair effect.
- So the stability of +1 increases in the order Al<Ga<In<Tl.
Common Mistakes
- Reversing the trend (thinking +1 is more stable for lighter elements) — inert-pair effect strengthens down the group, not up.
✓Final answerThe correct option is (B) — Al<Ga<In<Tl.
ANSWER: B
- AP EAPCET 2021Set eng-2021-08-25-FN1 markMCQQ.Among the following options, identify the one which exhibits the greatest number of oxidation states. (A) Fe (B) Mn (C) Cr (D) V
›Reveal solutionSolution
Manganese exhibits the broadest range of oxidation states among first-row transition metals. Answer: Mn.
Concept and Intuition
The number of oxidation states a transition metal can adopt tends to be maximised near the middle of the 3d series, where there are enough d-electrons to support both low and (through loss of many/all valence electrons) very high oxidation states, while still having partially-filled d-orbitals available for a range of intermediate states. Manganese, with configuration 3d54s2, is the textbook example, spanning +2 (as Mn2+) all the way to +7 (as MnO4−).
Step-by-Step Solution
- V (Z=23): common oxidation states +2,+3,+4,+5 — 4 common states.
- Cr (Z=24): common oxidation states +2,+3,+6 (and +4,+5 less commonly) — fewer well-established states than Mn.
- Mn (Z=25): common oxidation states +2,+3,+4,+5,+6,+7 — the widest, most well-established spread.
- Fe (Z=26): mainly +2,+3 (occasionally +4,+6) — narrower range.
- Manganese clearly shows the greatest number of oxidation states.
Common Mistakes
- Assuming Cr (known for +6, as in dichromate/chromate) has the widest range — Cr's well-established states are actually fewer than Mn's.
✓Final answerThe correct option is (B) — Mn.
ANSWER: B
- AP EAPCET 2021Set eng-2021-10-05-FN1 markMCQQ.The most common oxidation state among lanthanoids is ______ (A) +4 (B) +3 (C) +2 (D) +1
›Reveal solutionSolution
Almost all lanthanoids show a dominant +3 oxidation state because losing the 6s2 (and 5d1 where present) electrons is comparatively easy, while removing a 4th electron from the deeply shielded 4f subshell requires a very high ionisation energy.
Concept and Intuition
The chemistry of lanthanoids is governed by the filling of the inner 4f subshell, which is well shielded from the surrounding chemical environment by the outer 5s25p6 shells. Because the 4f electrons are so shielded, they don't participate readily in bonding, and it is always the outermost 6s2 electrons (plus the occasional 5d1) that ionise first.
Step-by-Step Solution
- General configuration: [Xe]4f1−145d0,16s2.
- First two ionisations remove 6s2 readily; where a 5d1 electron is present it is the third to go — giving the Ln3+ ion with configuration [Xe]4fn.
- The 4th ionisation energy (removing an electron from 4fn) is very large, because the 4f subshell is already at a comparatively stable, contracted low-energy configuration once the outer electrons are gone.
- Some lanthanoids additionally show +2 or +4 states, but only when it gives them an especially stable f0, f7, or f14 configuration (e.g., Ce4+ is f0, Eu2+ is f7) — these are exceptions, not the norm.
- Therefore the characteristic, most common oxidation state across the whole lanthanoid series is +3.
Common Mistakes
- Thinking +4 or +2 (seen for a few specific elements like Ce, Eu) is the general rule — these are special stability exceptions.
- Confusing lanthanoid oxidation-state behaviour with that of the d-block transition metals, which show many oxidation states.
✓Final answerThe correct option is (B) — +3.
ANSWER: B
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.