Q.Solve the following differential equation: y−cosy=x ; (ysiny+cosy+x)y′=y
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Implicit Differentiation
Implicit Differentiation
When y isn't alone
You can differentiate y=x2+3x term by term because y is written explicitly in terms of x. But an equation like x2+y2=25, or x3+y3=6xy, does not give y by itself — solving for y is messy or downright impossible.
Implicit differentiation finds dxdy without isolating y: treat y as an unknown function of x, differentiate the whole equation as it stands, then solve for dxdy.
The one key move: y is really y(x)
Wherever y appears, picture y(x) hiding inside. Differentiating a y-term therefore needs the chain rule, which tacks on a factor of dxdy:
dxd(y2)=2ydxdy.
That extra dxdy on every y-term is the whole trick.
The procedure
- Differentiate both sides with respect to x, treating y as y(x).
- Each time you differentiate a y-term, multiply by dxdy (chain rule); use the product rule on mixed terms such as xy.
- Gather all dxdy terms on one side, everything else on the other.
- Factor out dxdy and divide.
Worked example
For x2+y2=25:
2x+2ydxdy=0⇒dxdy=−yx.
The answer naturally contains both x and y — that is normal here. To get the slope at a point on the curve, substitute the coordinates after differentiating; there is no need to solve for y first. …
Concept: Implicit Differentiation — we differentiate the given relation with respect to x and then compare with the given differential equation.
Step 1: Differentiate y−cosy=x implicitly with respect to x:
y′+(siny)y′=1⇒y′(1+siny)=1.
Step 2: From the above, y′=1+siny1. Substitute this into the given differential equation:
(ysiny+cosy+x)⋅1+siny1=y.
Step 3: Multiply both sides by 1+siny:
ysiny+cosy+x=y(1+siny)=y+ysiny.
Step 4: Cancel ysiny from both sides, leaving: …
The key idea is to differentiate the given relation implicitly with respect to x, then substitute the expression for y′ from the second equation to verify consistency. The differential equation reduces to an identity, confirming that the given relation is indeed a solution.
Why implicit differentiation?
We are given two pieces: an implicit relation between x and y,
y−cosy=x,
and a differential equation,
(ysiny+cosy+x)y′=y.
The natural question: does the first relation satisfy the second? Since y is not isolated (it appears both inside and outside the cosine), we cannot write y as an explicit function of x in elementary terms. That’s exactly where implicit differentiation shines — we differentiate both sides of the relation with respect to x, treating y as a function of x, and then compare the result with the given differential equation.
Step-by-step solution
1. Differentiate the implicit relation
We start with
y−cosy=x.
Differentiate both sides with respect to x:
dxd(y)−dxd(cosy)=dxd(x).
The derivative of y is y′. For cosy, we use the chain rule: derivative of cosy is −siny, times y′. So:
y′−(−siny⋅y′)=1.
That simplifies to:
y′+(siny)y′=1.
2. Factor and solve for y′
Factor y′ out of the left side:
y′(1+siny)=1.
Hence:
y′=1+siny1.
This expression for y′ is derived purely from the implicit relation. It tells us the slope of the curve at any point where 1+siny=0.
3. Substitute into the differential equation
The given differential equation is:
(ysiny+cosy+x)y′=y.
Replace y′ with 1+siny1:
(ysiny+cosy+x)⋅1+siny1=y.
4. Use the original relation to simplify x
We know from the relation that x=y−cosy. Substitute this into the bracket: …
Method: Verify an implicit solution, using the relation to remove x
Use this when a relation like y−cosy=x must be checked against an equation that also contains x.
Steps
Step 1: Differentiate the relation implicitly and solve for y′.
Differentiating y−cosy=x gives y′(1+siny)=1, so y′=1+siny1.
Step 2: Substitute y′ into the target equation.
Replace y′ in (ysiny+cosy+x)y′=y. …
Common Mistakes
Mistake 1: Leaving x in the expression.
Why it's wrong: after substituting y′=1+siny1, the bracket ysiny+cosy+x cannot simplify to y(1+siny) unless you replace x using the given relation x=y−cosy. Correct approach: use the original relation to eliminate x.
Mistake 2: Forgetting the chain-rule sign on cosy. …
Showing the 12 most recent of 50 on this concept.
- AP EAPCET 2025Set eng-2025-05-26-FN1 markMCQQ.If y=(logxsinx)x, then dxdy= (A) y[logcosxxsinx+log(logsinx)+logx1−log(logx)] (B) y[logsinxxcosx−log(logsinx)+logx1+log(logx)] (C) y[logsinxxcotx+log(logsinx)−logx1−log(logx)] (D) y[logsinxxcotx−log(logsinx)+logx1−logx]
›Reveal solutionSolution
This is a logarithmic-differentiation problem with a function-of-a-function base; careful chain-rule bookkeeping on u=logx(sinx) gives option (C).
Concept and Intuition
When both the base and the exponent are functions of x (here the base is itself logx(sinx)), the standard technique is logarithmic differentiation: take ln of both sides to turn the power into a product, then differentiate using the product and chain rules.
Step-by-Step Solution
- Let u=logx(sinx)=lnxlnsinx, so y=ux.
- Take logs: lny=xlnu.
- Differentiate: yy′=lnu+x⋅uu′.
- Compute u′: with u=lnxlnsinx,
u′=(lnx)2cotx⋅lnx−lnsinx⋅x1.
- Then
uu′=(lnx)2cotx⋅lnx−xlnsinx⋅lnsinxlnx=lnsinxcotx−xlnx1.
- So x⋅uu′=lnsinxxcotx−lnx1.
- And lnu=ln(lnsinx)−ln(lnx).
- Combine:
yy′=ln(lnsinx)−ln(lnx)+lnsinxxcotx−lnx1,
so …
- AP EAPCET 2022Set eng-2022-07-06-FN1 markMCQQ.If xycos4α+yxsin4α=2sin2α⋅cos2α, then dxdy= (A) sin3αcosα (B) sin2αcos2α (C) cos2αsin2α (D) sinαcos3α
›Reveal solutionSolution
The given relation is secretly a perfect square in disguise; it forces y=xtan2α, so dy/dx=tan2α.
Concept and Intuition
Rather than differentiating implicitly right away, it pays to recognise the algebraic structure first. Multiplying by xy converts the equation into a quadratic in x and y that factors as a perfect square, revealing y/x is actually a constant (independent of x), which makes the derivative trivial.
Step-by-Step Solution
- Start from xycos4α+yxsin4α=2sin2αcos2α.
- Multiply both sides by xy: y2cos4α+x2sin4α=2xysin2αcos2α.
- Rearrange: y2cos4α−2xysin2αcos2α+x2sin4α=0.
- This is (ycos2α−xsin2α)2=0, so ycos2α=xsin2α, i.e. y=xtan2α. …
- AP EAPCET 2021Set eng-2021-08-19-AN1 markMCQQ.If log(1+x2−x)=y(1+x2), then (1+x2)dxdy+xy= (A) 0 (B) 1 (C) 2 (D) −1
›Reveal solutionSolution
Implicit differentiation of log(1+x2−x)=y1+x2, using (1+x2−x)(1+x2+x)=1, collapses directly to the requested combination. Answer: −1.
Concept and Intuition
Writing s=1+x2 turns the relation into log(s−x)=ys, a compact form whose derivative — after using the identity s2−x2=1 — telescopes into exactly the expression (1+x2)y′+xy asked for.
Step-by-Step Solution
- Let s=1+x2; then s′=sx and s2−x2=1⇒(s−x)(s+x)=1⇒s−x1=s+x.
- Given: log(s−x)=ys. Differentiate both sides w.r.t. x: s−xs′−1=y′s+ys′ …
- AP EAPCET 2025Set eng-2025-05-26-FN1 markMCQQ.If sinxcosy−cosysinx=0, then dxdy= (A) tanx (B) 1 (C) −1 (D) −cotx
›Reveal solutionSolution
The given relation simplifies to sinx=cosy; implicit differentiation of this simpler relation gives dxdy=−1.
Concept and Intuition
Many implicit-differentiation problems hide a much simpler relation inside a more complicated-looking equation. Recognizing that both sides share a common factor of sinxcosy lets us cancel down to something we can differentiate directly, instead of differentiating the square-root expression term by term.
Step-by-Step Solution
- Start with sinxcosy−cosysinx=0, i.e. sinxcosy=cosysinx.
- Divide both sides by sinxcosy (both taken positive for the relevant domain):
sinxsinx=cosycosy⇒sinx=cosy.
- Squaring, sinx=cosy.
- Differentiate both sides with respect to x: cosx=−sinydxdy. …
- AP EAPCET 2021Set eng-2021-08-19-FN1 markMCQQ.If 3sinxy+4cosxy=5, then dxdy is equal to ____ (A) 3cosxy−4sinxy3sinxy+4cosxy (B) 4cosxy−3sinxy3cosxy+4sinxy (C) x−y (D) yx
›Reveal solutionSolution
Since 3sinθ+4cosθ has maximum value exactly 5 (as 32+42=5), equating it to 5 forces xy to be a fixed constant, so implicit differentiation of xy=c gives dy/dx=−y/x.
Concept and Intuition
asinθ+bcosθ always has amplitude a2+b2 — here 9+16=5. So the equation 3sin(xy)+4cos(xy)=5 isn't a "generic" implicit curve; it can only be satisfied when the expression sits exactly at its maximum, which happens at one specific angle. That pins xy to a single constant value, turning a trigonometric-looking implicit relation into the much simpler xy=const.
Step-by-Step Solution
- Note 32+42=25=52, so 3sinθ+4cosθ has maximum value 5, attained only when θ equals the specific angle ϕ=tan−1(3/4) (mod 2π).
- The given equation demands 3sin(xy)+4cos(xy)=5, i.e. the maximum — so xy=ϕ is fixed, a constant independent of which point on the curve we pick. …
- AP EAPCET 2025Set eng-2025-05-22-AN1 markMCQQ.If x−xy+y−xy=1, then dxdy= (A) −x−x2y−y2 (B) −1−x21−y2 (C) −1−x1−y (D) −x+yx−y
›Reveal solutionSolution
Squaring the constraint reveals that it forces x+y=1 identically, so dxdy=−1 throughout; matching this against the options singles out −x−x2y−y2, since it equals −1 for every point satisfying y=1−x.
Concept and Intuition
Rather than blindly grinding through implicit differentiation of two square roots, it pays to first understand the curve itself. Squaring x−xy+y−xy=1 carefully (using s=x+y,p=xy) collapses to a perfect square equalling zero, revealing that the relation is nothing but the straight line x+y=1. Once we know that, dxdy=−1 is immediate, and we just need to find which option reduces to −1 on this line.
Step-by-Step Solution
- Square the given equation:
x(1−y)+y(1−x)+2xy(1−x)(1−y)=1
x+y−2xy+2xy(1−x)(1−y)=1
- Let s=x+y, p=xy. Then:
2p(1−x)(1−y)=1−s+2p
Note (1−x)(1−y)=1−s+p. Squaring again:
4p(1−s+p)=(1−s+2p)2
Let q=1−s. Expanding both sides: LHS =4pq+4p2; RHS =q2+4pq+4p2. So 0=q2, i.e. q=0, i.e. s=1.
3. Hence x+y=1 is forced — the given relation is the line y=1−x (restricted to the domain where the square roots are real, 0≤x,y≤1).
4. Differentiating y=1−x directly: dxdy=−1.
5. Check which option gives −1 identically along y=1−x:
- (A): y−y2=y(1−y). Substituting y=1−x: y(1−y)=(1−x)⋅x=x−x2. So the ratio is exactly 1, and −1=−1 for every x. ✓ …
- AP EAPCET 2021Set eng-2021-08-23-AN1 markMCQQ.If y=logyx, then dxdy= ______ (A) xlogy1 (B) x(1+logy)logy (C) x(1+logy)1 (D) 1+logy1
›Reveal solutionSolution
Rewriting y=logyx as ylny=lnx and differentiating implicitly gives dxdy=x(1+logy)1.
Concept and Intuition
logyx means "logarithm of x to base y", i.e. lnylnx. So the given relation y=logyx really means y=lnylnx, or equivalently ylny=lnx — a cleaner form to differentiate implicitly, since it avoids a quotient with y in both places.
Step-by-Step Solution
- y=logyx=lnylnx⇒ylny=lnx.
- Differentiate both sides with respect to x, treating y as a function of x:
dxd(ylny)=dxd(lnx)
- LHS (product rule): dxdylny+y⋅y1dxdy=dxdy(lny+1).
- RHS: x1.
- So dxdy(lny+1)=x1⇒dxdy=x(1+lny)1=x(1+logy)1. …
- AP EAPCET 2025Set eng-2025-05-27-FN1 markMCQQ.If (a+2bcosx)(a−2bcosy)=a2−b2 where a>b>0, then at (4π,4π), dxdy= (A) a−ba+b (B) a+ba−b (C) a+2ba−2b (D) 2a−b2a+b
›Reveal solutionSolution
Expand the product, simplify by dividing by the common factor b, then implicitly differentiate and evaluate at x=y=π/4. Answer: a+ba−b.
Concept and Intuition
The given relation looks intimidating as a product, but expanding it cancels the a2 on both sides (since the RHS is a2−b2) and leaves a much simpler equation relating cosx,cosy, and cosxcosy. From there it's routine implicit differentiation; the special evaluation point x=y=π/4 is chosen because sin and cos coincide there, which cancels neatly.
Step-by-Step Solution
- Expand: a2−a2bcosy+a2bcosx−2b2cosxcosy=a2−b2.
- Cancel a2 from both sides: 2ab(cosx−cosy)−2b2cosxcosy=−b2.
- Divide through by b (nonzero): 2a(cosx−cosy)−2bcosxcosy+b=0.
- Differentiate implicitly w.r.t. x (treat y=y(x)):
2a(−sinx+siny⋅y′)−2b(−sinxcosy−cosxsiny⋅y′)=0.
- Group y′ terms: y′(2asiny+2bcosxsiny)=2asinx−2bsinxcosy.
- So y′=siny(2a+2bcosx)sinx(2a−2bcosy).
- At x=y=4π: sinx=siny=cosx=cosy=21. Substitute: …
- AP EAPCET 2021Set eng-2021-08-19-AN1 markMCQQ.If x2+y2=1, then ______. (A) y(y′′)−4(y′)2+1=0 (B) y(y′′)+(y′)2+1=0 (C) y(y′′)−(y′)2−1=0 (D) y(y′′)+2(y′)2+1=0
›Reveal solutionSolution
Differentiating the circle equation x2+y2=1 twice implicitly gives the differential equation yy′′+(y′)2+1=0.
Concept and Intuition
Any implicit curve, when differentiated repeatedly with respect to x treating y as a function of x, yields a differential equation that the curve satisfies. Here we just need to differentiate twice and simplify.
Step-by-Step Solution
- Start with x2+y2=1.
- Differentiate with respect to x: 2x+2yy′=0⟹x+yy′=0.
- Differentiate again with respect to x: 1+(y′)2+yy′′=0 (using the product rule on yy′, which gives y′⋅y′+y⋅y′′).
- So the relation is yy′′+(y′)2+1=0. …
- AP EAPCET 2023Set eng-2023-05-16-AN1 markMCQQ.If x2tan−1xy−y2tan−1yx=k, then (dxdy)(1,1)= (A) 0 (B) π/4 (C) 1 (D) π/2
›Reveal solutionSolution
Implicit differentiation of x2tan−1(y/x)−y2tan−1(x/y)=k evaluated at (1,1) gives dy/dx=1.
Concept and Intuition
Differentiate both terms using product and chain rules, being careful with the derivatives of tan−1(y/x) and tan−1(x/y) with respect to x (treating y as a function of x).
Step-by-Step Solution
- dxd[x2tan−1xy]=2xtan−1xy+x2⋅x2+y2y′x−y.
- dxd[y2tan−1yx]=2yy′tan−1yx+y2⋅x2+y2y−xy′.
- Setting derivative of LHS =0 and evaluating at (1,1), where tan−1(1)=π/4 for both terms: 2⋅4π+2y′−1−2y′⋅4π−21−y′=0. …
- AP EAPCET 2025Set eng-2025-05-21-AN1 markMCQQ.If x2+y2=t−t1 and x4+y4=t2+t21, then dxdy= (A) xy (B) x2y2 (C) xy (D) −xy
›Reveal solutionSolution
Eliminating the parameter t between the two given equations produces the direct relation x2y2=−1 between x and y, whose implicit derivative is −y/x.
Concept and Intuition
When x and y are both linked to a parameter t through two equations, differentiating each with respect to t separately (and dividing) works, but it is often faster — and here it is exact — to first eliminate t algebraically to get a direct x–y relation, then differentiate that implicitly in the ordinary way.
Step-by-Step Solution
- Square the first equation: (x2+y2)2=(t−t1)2=t2−2+t21, i.e. x4+2x2y2+y4=t2+t21−2.
- The second equation says x4+y4=t2+t21. Substitute this in: (t2+t21)+2x2y2=t2+t21−2.
- This forces 2x2y2=−2⇒x2y2=−1 — a t-free relation directly linking x and y. …
- AP EAPCET 2023Set eng-2023-05-16-FN1 markMCQQ.The points on the curve y2=x+sinx at which the normal is parallel to the Y-axis lie on (A) a line parallel to Y-axis (B) a circle with centre at origin (C) a parabola (D) a pair of lines bisecting the angle between the coordinate axes
›Reveal solutionSolution
The condition "normal ∥ Y-axis" means the tangent slope is zero; solving y′=0 forces cosx=−1, where sinx=0 automatically — so the qualifying points satisfy y2=x, i.e. they lie on a parabola.
Concept and Intuition
A normal line is perpendicular to the tangent. A vertical normal means the tangent itself is horizontal, i.e. dy/dx=0. So this problem reduces to locating the turning points of the implicit curve and then recognising which simpler curve those special points fall on.
Step-by-Step Solution
- Differentiate y2=x+sinx implicitly: 2ydxdy=1+cosx⇒dxdy=2y1+cosx.
- Vertical normal ⇒ horizontal tangent ⇒dxdy=0. Since y=0 generically, this requires the numerator to vanish: 1+cosx=0⇒cosx=−1⇒x=(2n+1)π, n∈Z.
- At these values, sinx=sin((2n+1)π)=0.
- Substitute back into the curve: y2=x+sinx=x+0=x. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.