What is transformer ratio ?

Question of 50

Q. What is transformer ratio ?

Andhra Pradesh BieapBIEAP Intermediate Board 2020Subjective· 2mImportance★★★★★

0% · 0/50 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Transformer Turns Ratio

What the Turns Ratio Really Means

Imagine you have two coils of wire wrapped around a shared iron core. One coil (the primary) has a certain number of loops — say 100 turns. The other (the secondary) has a different number — say 200 turns. When you feed AC voltage into the primary, it creates a changing magnetic field that cuts through both coils. That field induces a voltage in the secondary.

The key insight: each turn of wire gets the same "share" of the magnetic push. If one turn in the primary gets 1 volt induced across it, then every turn in the secondary also gets 1 volt. So if the secondary has twice as many turns, it gets twice the total voltage.

That's the whole idea in a nutshell. The turns ratio directly determines how voltage transforms from primary to secondary.

The Precise Relation

The voltage across each coil is proportional to the number of turns:

\frac{V_s}{V_p} = \frac{N_s}{N_p}

Where $V_p$ and $V_s$ are the primary and secondary voltages, and $N_p$ and $N_s$ are the number of turns on each coil.

\frac{V_s}{V_p} = \frac{N_s}{N_p} = \frac{I_p}{I_s}

The current relation follows from conservation of energy. An ideal transformer doesn't create or destroy power — it just transforms it. So the power in equals the power out:

V_p I_p = V_s I_s

Rearranging gives $\frac{I_p}{I_s} = \frac{V_s}{V_p} = \frac{N_s}{N_p}$ .

Watch out

The current ratio is the inverse of the turns ratio. If you step up voltage (more secondary turns), the secondary current drops proportionally. Many students flip this by accident.

What This Tells You

If $N_s > N_p$ , you have a step-up transformer — secondary voltage is higher, secondary current is lower. If $N_s < N_p$ , it's a step-down transformer — secondary voltage is lower, secondary current is higher.

The turns ratio itself is often written as $a = \frac{N_p}{N_s}$ (primary over secondary). Then:

V_s = \frac{V_p}{a}, \quad I_s = a I_p

A Concrete Example

A transformer has 500 turns on the primary and 100 turns on the secondary. The primary is connected to 230 V AC.

Turns ratio $a = \frac{500}{100} = 5$ . This is a step-down transformer.

Secondary voltage: $V_s = \frac{230}{5} = 46$ V. …

Start your 14-day free trial to unlock the full solution →

The transformer ratio is the ratio of the number of turns (or, equivalently, voltages) in the secondary winding to the primary winding of a transformer.

A transformer consists of a primary coil with $N_p$ turns and a secondary coil with $N_s$ turns, wound on a common laminated iron core. The transformer ratio (turns ratio) K is defined as:

$K = \dfrac{N_s}{N_p}$

For an ideal transformer (no energy losses), the induced EMF in each coil is proportional to its number of turns, so:

$K = \dfrac{N_s}{N_p} = \dfrac{V_s}{V_p}$

Also, since input power equals output power ( $V_pI_p = V_sI_s$ ) in an ideal transformer:

…

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

CBSE 2026Set V11 mark
$Q.For a step-down transformer, the ratio of primary current to secondary current is __________. Fill in the blank choosing the appropriate answer from the bracket: (photons, diffraction, polarity, monopoles, greater than unity, less than unity)$
›Reveal solutionSolution

$N_s/N_p$ (equal to $V_s/V_p$ ), i.e. less than 1. …

Start your 14-day free trial to see the full solution →
CBSE 2026Set A1 markMCQ
$Q. Which quantity decreases in step-down transformer? (A) Current (B) Voltage (C) Frequency (D) Power$
›Reveal solutionSolution

A step-down transformer reduces the secondary voltage; current rises to conserve power.

A transformer works by mutual induction. The turns ratio fixes the voltage ratio:

$\frac{V_s}{V_p}=\frac{N_s}{N_p}$

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set D1 markMCQ
$Q. In a step-up transformer, the value of current in secondary compared to the primary coil is (A) equal (B) less (C) more (D) no relation between the two$
›Reveal solutionSolution

A step-up transformer increases voltage, so to conserve power the secondary current must be smaller than the primary current.

For an ideal transformer, power is conserved:

$V_p I_p = V_s I_s$

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. A transformer has 400 secondary turns and 500 primary turns. If the secondary voltage is 400 V, the primary voltage is:$
(a) 500V
(b) 400V
(c) 1000V
(d) 800V.
›Reveal solutionSolution

For a transformer, $\dfrac{V_p}{V_s}=\dfrac{N_p}{N_s}$ .

Given: $N_s = 400$ , $N_p = 500$ , $V_s = 400\,V$ .

Using the transformer turns-ratio relation: …

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. In a transformer, the number of turns in the primary and the secondary are 410 and 1230 respectively. If the current in primary is 6 A, then that in the secondary coil is :$
(a) 12 A
(b) 2 A
(c) 1 A
(d) 18 A
›Reveal solutionSolution

Using the transformer current relation $I_sN_s=I_pN_p$ with $N_p=410$ , $N_s=1230$ , $I_p=6$ A gives $I_s=2$ A.

Working

For an ideal transformer, the turns and currents in primary/secondary satisfy

$I_pN_p = I_sN_s \ \Rightarrow\ I_s = I_p\dfrac{N_p}{N_s}$

…

Start your 14-day free trial to see the full solution →
CBSE 2024Set ANNUAL1 mark
$Q. In an ideal transformer, number of turns in the primary and secondary are 200 and 1000 respectively. If the input voltage is 200 V, what will be its output voltage ?$
›Reveal solutionSolution

For an ideal transformer, $V_s/V_p = N_s/N_p$ .

$\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p} \implies V_s = V_p \times \dfrac{N_s}{N_p} = 200 \times \dfrac{1000}{200} = 1000\text{ V}$

…

Start your 14-day free trial to see the full solution →
CBSE 2023Set F1 markMCQ
$Q. In step-up transformer, the value of current in secondary coil compared to primary coil is (A) equal (B) less (C) more (D) none of these$
›Reveal solutionSolution

Step-up transformer: voltage up, current down, so secondary current is less than primary.

For an ideal transformer, power is conserved, so $V_p I_p = V_s I_s$ , giving

$\frac{I_s}{I_p} = \frac{V_p}{V_s} = \frac{N_p}{N_s}.$ …

Start your 14-day free trial to see the full solution →
CBSE 2022Set I1 markMCQ
$Q. Transformation ratio in transformer is (A) V_S/V_P (B) V_P/V_S (C) 1/(V_S\cdotV_P) (D) 1/(I_S\cdotI_P)$
›Reveal solutionSolution

Transformation ratio k = V_S/V_P = N_S/N_P.

In an ideal transformer the induced emf is proportional to the number of turns, so the secondary and primary voltages relate to the turns as:

$\frac{V_S}{V_P} = \frac{N_S}{N_P} = k$

…

Start your 14-day free trial to see the full solution →
CBSE 2022Set I1 markMCQ
$Q. Which of the following is correct for step-up transformer? (A) V_s < V_p (B) V_s > V_p (C) V_s = V_p (D) V_s << V_p$
›Reveal solutionSolution

A step-up transformer increases the output voltage: V_s > V_p.

For an ideal transformer the voltage ratio equals the turns ratio: $\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p}$ .

…

Start your 14-day free trial to see the full solution →
CBSE 2020Set NC1 mark
$Q. A power transmission line feeds input power at 2300 V to a step-down transformer with its primary windings having 4000 turns. What should be the number of turns in the secondary in order to get an output power at 230 V?$
›Reveal solutionSolution

For an ideal transformer, turns ratio equals voltage ratio; rearrange to find the secondary turns.

Formula

$\frac{N_s}{N_p} = \frac{V_s}{V_p}$

Substitute

…

Start your 14-day free trial to see the full solution →
CBSE 2019Set ANNUAL1 markMCQ
$Q. A step-up transformer operates on a 230 V line and supplies current of 2 A to a load. The ratio of the primary and secondary windings is 1:25. The current in the primary coil is$
(a) 12.5 A
(b) 15 A
(c) 25 A
(d) 50 A
›Reveal solutionSolution

For an ideal transformer, $I_pN_p=I_sN_s$ ; use the given turns ratio and secondary current to find the primary current.

Step 1 — Ideal transformer relation

$\frac{I_p}{I_s} = \frac{N_s}{N_p}$

Step 2 — Substitute

…

Start your 14-day free trial to see the full solution →
CBSE 2019Set ANNUAL1 markMCQ
$Q. In a step - up transformer, no. of turns in primary and secondary coils are N1 and N2, then -$
(a) N1 > N2
(b) N2 > N1
(c) N1 = N2
(d) N1 = 0
›Reveal solutionSolution

A step-up transformer has more turns in the secondary, so N2 > N1.

For an ideal transformer the turns ratio equals the voltage ratio:

$\frac{V_s}{V_p} = \frac{N_2}{N_1}.$

…

Start your 14-day free trial to see the full solution →

←Previous chapterCh 6Electromagnetic Induction

Q.What is transformer ratio ?

🎓Unlock everything free for 14 days

Unlock everything free for 14 days