Q.Write down the IUPAC name of the compound in which a benzene ring bears a single –N(CH3)2 (dimethylamino) group.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — IUPAC Nomenclature
IUPAC Nomenclature (Organic Compounds)
IUPAC nomenclature is a systematic way to name a compound so that its name alone tells you its exact structure, with no ambiguity. Every organic name follows the same underlying recipe, whatever the functional group.
The Recipe
-
Identify the principal characteristic group. If the molecule has a functional group senior enough to be named as a suffix (carboxylic acid > ester > amide > nitrile > aldehyde > ketone > alcohol > amine, and so on down the seniority order), that group decides the suffix and must be included in the parent chain. A halogen is never senior enough to be a suffix — it is always named as a prefix ("halo-"), whatever else is present.
-
Choose the parent chain. The parent is the longest continuous carbon chain that contains the principal characteristic group (if there is one). Among chains of the same length, the one with the most substituents wins.
-
Number the chain. Number from whichever end gives the LOWEST LOCANT to the principal characteristic group first. If there is no principal group (e.g. a simple haloalkane, or an alkene with a halogen substituent), lowest locant goes to the site of unsaturation (double/triple bond) first, then to substituents as a set.
Watch outWhen two numbering directions give the SAME locant for the principal group/unsaturation (a genuine tie), the tie-break is the lowest locant SET for the substituents as a group — compare the two sets at their first point of difference. Only if the sets are themselves tied does the alphabetically-first substituent get the lower number.
-
Name and cite the substituents as prefixes, in alphabetical order (ignoring multiplying prefixes like di-/tri- but not ignoring structural prefixes like iso-/cyclo-), each with its own locant.
-
Assemble the name: locants + substituent prefixes (alphabetical) + parent chain name + suffix (if any).
Worked Example
CH3−CH(Cl)−CH(CH3)−CH2−CH3: the longest chain is 5 carbons (pentane), no principal characteristic group (just a halogen substituent), so number for the lowest locant set. From the left: Cl at C2, methyl at C3 → set {2,3}. From the right: methyl at C3, Cl at C4 → set {3,4}. {2,3} is lower, so numbering from the left wins: 2-chloro-3-methylpentane. …
Why this formula?
IUPAC Nomenclature: Why the Rules Work the Way They Do
IUPAC nomenclature is not a single formula, but a system of rules designed to give every organic compound a unique, unambiguous name. The "why" behind these rules lies in clarity, consistency, and communication — ensuring that a chemist in Tokyo and one in Toronto draw the same structure from the same name.
1. The Core Principle: The Longest Carbon Chain
Rule: Identify the longest continuous chain of carbon atoms. This becomes the parent chain (e.g., pentane, hexane).
Why?
- The longest chain represents the backbone of the molecule.
- It gives the most stable, fundamental name — shorter chains would be branches, not the main structure.
- Example: In a molecule with 5 carbons in a row and a 2-carbon branch, calling it "pentane" (not "ethane") tells you the core skeleton is 5 carbons long.
Key idea: The parent chain is the maximum continuous path — not necessarily the one that looks "straight" on paper.
2. Numbering: Lowest Locants (The "First Point of Difference" Rule)
Rule: Number the parent chain so that substituents get the smallest possible numbers. When there's a tie, compare the first point of difference.
Why?
- This ensures reproducibility — two chemists will always number the same way.
- It avoids ambiguity: "2-methylpentane" is unambiguous; "3-methylpentane" would be a different compound.
- The first point of difference rule: If you have substituents at positions 2,4 and 3,5, choose 2,4 because 2 < 3 (the first number is smaller).
Example:
- For a methyl group on carbon 2 vs. carbon 4 of a 5-carbon chain:
- 2-methylpentane (correct)
- 4-methylpentane (wrong — higher number)
3. Alphabetical Order of Substituents
Rule: List substituents in alphabetical order (ignoring prefixes like di-, tri-, sec-, tert- but not iso-).
Why?
- Alphabetical order is a universal sorting convention — no need to remember priority based on size or complexity.
- It makes names searchable and predictable.
- Example: "3-ethyl-2-methylpentane" (e before m) — not "2-methyl-3-ethylpentane".
Exception: Prefixes like iso- and neo- are considered part of the name (e.g., isopropyl comes before methyl because "i" < "m").
4. Multiple Bonds: The "Lowest Locant" Rule for Alkenes/Alkynes
Rule: Number the chain so that the double or triple bond gets the lowest possible number, even if it means giving a substituent a higher number.
Why?
- The functional group (alkene/alkyne) is more important than alkyl substituents.
- The bond position defines the compound's reactivity and geometry.
- Example: In pent-2-ene (not pent-3-ene), the double bond is between carbons 2 and 3 — the lower number (2) is used.
Priority order:
- Principal functional group (e.g., -OH, -COOH, C=C)
- Multiple bonds
- Substituents (alkyl, halo, etc.)
5. The "Suffix" and "Prefix" System …
The parent is aniline (aminobenzene) and the two methyl groups sit on nitrogen, indicated by the locant N. …
A benzene ring bearing one –N(CH3)2 group is a tertiary aromatic amine: aniline with both amino hydrogens replaced by methyl groups. Its IUPAC name is N,N-dimethylaniline.
Naming
- Parent: aniline (C6H5NH2), the retained IUPAC name for aminobenzene.
- Substituents: two methyl groups, both attached to the nitrogen atom. …
Method: IUPAC Nomenclature - Naming N-Substituted Anilines
Core Concept
An amine's IUPAC name is built from its parent (here, the retained name aniline) plus locants that show exactly where each substituent sits - substituents on the ring get a numeral locant, but substituents attached directly to nitrogen get the italic locant "N" instead.
Steps
- Identify the parent structure: an -NH2 (or substituted -NH2/-NR2) attached to benzene is named as a derivative of aniline (the IUPAC-retained name for aminobenzene).
- Identify every substituent and decide whether it sits on a ring carbon or directly on the nitrogen atom.
- For substituents on nitrogen (not the ring), use the italic locant "N" in place of a ring-position number - one substituent on N gives the prefix N-, two gives N,N-.
- Count identical substituents with a multiplying prefix (di-, tri-, ...).
- Assemble the full name: locant(s) + multiplying prefix + substituent name + parent name.
- Optionally give the fully systematic alternative (aniline becomes benzenamine). …
- AHSEC Higher Secondary (HS) 1st Year Examination 2024Set ANNUAL1 markQ.Write the IUPAC name of the following compound: main chain H3C-CH2-CH(-CH2-CH3)-C(CH3)(CH3)-CH2-CH2-CH3, where the 3rd carbon of the 7-carbon main chain carries an ethyl (-CH2-CH3) branch, and the 4th carbon carries two methyl (-CH3) branches (one drawn above, one drawn below the chain).
›Reveal solutionSolution
The compound is a substituted heptane with an ethyl group at C3 and two methyl groups at C4; its IUPAC name is 3-ethyl-4,4-dimethylheptane.
Step 1 — Identify the longest continuous carbon chain: The main chain drawn has 7 carbons (heptane). Checking whether a longer chain exists by routing through the ethyl branch instead shows an alternative 7-carbon chain of exactly the same length, so heptane (7 carbons) is confirmed as the parent chain — the choice between the two equal-length options makes no difference here since both give the same substitution pattern.
Step 2 — Identify substituents: The 3rd carbon of the main chain carries an ethyl group (-CH2CH3). The 4th carbon (a quaternary carbon with no hydrogen) carries two methyl groups (-CH3, -CH3).
…
- AHSEC Higher Secondary (HS) 1st Year Examination 2023Set ANNUAL1 markQ.Write the IUPAC name of the following compound:
›Reveal solutionSolution
The compound CH3–CH=C(CH3)–C≡CH is 3-methylpent-3-en-1-yne.
Step 1 — Longest chain with both multiple bonds: a 5-carbon (pent) chain carrying a terminal C≡C triple bond at one end and an internal C=C double bond, with a methyl substituent on the carbon that bears the double bond. …
- AHSEC Higher Secondary (HS) Final Examination 2022Set ANNUAL1 markQ.Write the IUPAC name of the following compound: a benzene ring bearing the substituent -CH=CH-CH2-OH (Ph-CH=CH-CH2-OH).
›Reveal solutionSolution
Number the 3-carbon chain from the -OH carbon; the phenyl group sits on C3 and the C=C is between C2-C3.
The compound is Ph-CH=CH-CH2-OH. The principal characteristic group is -OH (alcohol), so it gets the lowest locant and the suffix '-ol'.
Parent chain: the longest carbon chain containing the -OH carbon and the C=C — here it is a 3-carbon (propene) chain: C1(H2OH)-C2(H)=C3(H)-C6H5.
…
- AHSEC Higher Secondary (HS) 1st Year Examination 2022Set ANNUAL1 markQ.Write the IUPAC name of the following compound: OHC-CH2-CH2-COOH
›Reveal solutionSolution
OHC-CH2-CH2-COOH is named 4-oxobutanoic acid.
Step 1 -- Identify the longest chain containing both functional groups: numbering C1(COOH)-C2(H2)-C3(H2)-C4(HO, the aldehyde carbon). This is a 4-carbon (butane) chain.
Step 2 -- Identify seniority of functional groups: in IUPAC nomenclature, the order of seniority (for choosing the principal characteristic group/suffix) is carboxylic acid > ... > aldehyde. Since both -COOH and -CHO are present, -COOH (senior) is expressed as the suffix '-oic acid', and the aldehyde (-CHO), being junior here, is expressed as the prefix 'oxo-' (because it is not a terminal position after numbering from the acid end).
…
- AHSEC Higher Secondary (HS) 1st Year Examination 2020Set ANNUAL1 markQ.Write the IUPAC name of neopentane.
›Reveal solutionSolution
Neopentane, (CH3)4C, has the IUPAC name 2,2-dimethylpropane.
Neopentane has the structure (CH3)4C — a single central carbon atom bonded to four methyl (CH3) groups, with molecular formula C5H12 (an isomer of pentane).
To name it by IUPAC rules:
- Identify the longest continuous carbon chain: since the central carbon is bonded to 4 separate methyl groups and no two methyls are connected to each other, the longest chain running through the central carbon is only 3 carbons long — propane (C–C–C). …
- AHSEC Higher Secondary (HS) Final Examination 2018Set ANNUAL1 markQ.Give the structural formula of 2-Methylpropan-2-ol.
›Reveal solutionSolution
The structural formula of 2-methylpropan-2-ol is (CH3)3C–OH.
Name analysis: the parent chain is propan-2-ol (3 carbons, –OH on C-2); a methyl group is attached at C-2 as well. So C-2 carries the –OH plus a methyl branch, making it a tertiary alcohol.
Structure:
CH3 |CH3–C–OH
|
CH3
…
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.