One mole of H 2O and one mole of CO are taken in 10 L vessel and heated to 725 K. At equilibrium 40% of water

Exercises · 6.14

Q. One mole of H 2O and one mole of CO are taken in 10 L vessel and heated to 725 K. At equilibrium 40% of water (by mass) reacts with CO according to the equation, H2O

(g) + CO

(g) ⇌ H2

(g) + CO2

(g) Calculate the equilibrium constant for the reaction.

CBSENCERTSubjective· 3mImportance★★★★★est

27% · 42/155 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Equilibrium Constant Calculation

Equilibrium Constant Calculation: From Intuition to Precision

Imagine you're at a party where people can move between two rooms. Some people prefer the kitchen (more snacks), others prefer the living room (better music). After a while, the number of people in each room stops changing — not because everyone froze, but because the rate of people leaving the kitchen equals the rate of people entering it. The system is in dynamic equilibrium.

Chemical reactions work the same way. A reversible reaction like

$A + B \rightleftharpoons C + D$ doesn't stop when it reaches equilibrium. Instead, the forward reaction (making C and D) and the reverse reaction (making A and B) happen at the same rate. The concentrations of A, B, C, and D become constant — not equal, but constant.

The equilibrium constant $K$ is a number that tells you where this balance lies. It answers the question: At equilibrium, which side of the reaction is favoured?

The Intuitive Idea

Think of a seesaw. If $K$ is very large (say $10^6$ ), the equilibrium sits heavily on the product side — almost all A and B have turned into C and D. If $K$ is very small (say $10^{-6}$ ), the opposite is true: hardly any product forms. If $K$ is around 1, both sides have comparable amounts.

So $K$ is a ratio — a comparison of product concentrations to reactant concentrations at equilibrium, each raised to the power of their stoichiometric coefficients.

The Precise Statement

For a general reversible reaction at a given temperature:

aA + bB \rightleftharpoons cC + dD

the equilibrium constant $K_c$ (for concentrations in mol/L) is:

K_c = \frac{[C]^c [D]^d}{[A]^a [B]^b}

where $[X]$ means the equilibrium concentration of species X in moles per litre.

Important

The exponents come directly from the balanced chemical equation. If the coefficient of A is 2, you square its concentration. This is not optional — it's built into the definition.

What $K$ Actually Depends On

$K$ is constant at a given temperature. Change the temperature, and $K$ changes. But $K$ does not depend on:

Initial concentrations
Presence of a catalyst (catalysts speed up both directions equally)
Pressure or volume changes (for $K_c$ ; $K_p$ for gases has its own rules)

This is a critical exam point: if a problem gives you initial concentrations and asks for $K$ , you must first find equilibrium concentrations — you cannot plug in initial values.

A Worked Example

Problem:

$N_2(g) + 3H_2(g) \rightleftharpoons 2NH_3(g)$

At 500°C, equilibrium concentrations are:

$[N_2] = 0.50\ \text{M}$ , $[H_2] = 1.50\ \text{M}$ , $[NH_3] = 0.20\ \text{M}$

Calculate $K_c$ .

Solution:

Write the expression:

K_c = \frac{[NH_3]^2}{[N_2][H_2]^3}

Substitute:

K_c = \frac{(0.20)^2}{(0.50)(1.50)^3} = \frac{0.04}{0.50 \times 3.375} = \frac{0.04}{1.6875} \approx 0.0237

Note

The units cancel because the numerator and denominator both have units of (mol/L) $^2$ and (mol/L) $^4$ respectively — but by convention, $K_c$ is reported without units. The numerical value is what matters.

Common Pitfalls

Forgetting the exponents: A coefficient of 2 means square the concentration, not double it.
Using initial concentrations: You must use equilibrium concentrations only. …

Start your 14-day free trial to unlock the full solution →

The equilibrium constant $K_c$ is found by converting the given 40% mass of water into moles reacted, building the ICE table, and plugging equilibrium concentrations into the expression $K_c = \frac{[H_2][CO_2]}{[H_2O][CO]}$ . The result is $K_c = 0.444$ .

The problem gives you a percentage by mass, not by moles. That’s the first thing to handle carefully. Water and carbon monoxide start with one mole each in a 10 L vessel. When 40% of the water (by mass) reacts, you need to figure out how many moles that actually is — and since both reactants are gases, the stoichiometry is 1:1:1:1, which makes the rest straightforward.

Let’s walk through it.

Convert the mass percentage into moles of water reacted.

One mole of $H_2O$ has a mass of 18 g. 40% of that mass is $0.40 \times 18 = 7.2$  g.

Moles of water that reacted = $\frac{7.2}{18} = 0.40$ mol.

So 0.40 mol of $H_2O$ is consumed.

Watch out

A common mistake is to take 40% of 1 mole directly as 0.40 mol — which is actually correct here only because we started with exactly 1 mole. But the problem says “by mass”, so always check: if the initial amount weren’t 1 mole, the shortcut would fail. The safe route is mass → moles.
Set up the ICE table (Initial, Change, Equilibrium) in moles.

The reaction is:

H_2O(g) + CO(g) \rightleftharpoons H_2(g) + CO_2(g)

Species	Initial (mol)	Change (mol)	Equilibrium (mol)
$H_2O$	1.00	$-0.40$	$0.60$
$CO$	1.00	$-0.40$	$0.60$
$H_2$	0	$+0.40$	$0.40$
$CO_2$	0	$+0.40$	$0.40$

The change row follows the stoichiometric coefficients — all 1 here — so the moles of $H_2$ and $CO_2$ formed equal the moles of $H_2O$ reacted.

Convert equilibrium moles to concentrations.

Volume is 10 L, so divide each mole value by 10:

$[H_2O] = \frac{0.60}{10} = 0.060 \text{ M}$ …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

Showing the 12 most recent of 25 on this concept.

CBSE 2026Set sz1 markMCQ
$Q. Select the correct one: The rate at which a substance reacts, depends on its:$
(a) Active mass
(b) Molecular mass
(c) Equivalent mass
(d) Total volume
›Reveal solutionSolution

The Law of Mass Action states that the rate of a chemical reaction is proportional to the product of the active masses (molar concentrations) of the reactants, so the rate depends on active mass.

The Law of Mass Action (proposed by Guldberg and Waage) states that the rate at which a substance reacts is directly proportional to its active mass, where active mass is defined as the molar concentration of the substance (expressed in mol/L, i.e. [reactant]).

For a general reaction aA + bB -> products, the rate is proportional to [A]^a[B]^b — the exponents being the active masses raised to powers related to the stoichiometry (for elementary reactions).

…

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 mark
$Q. Give the name of mixture of reactants and products in the equilibrium state.$
›Reveal solutionSolution

At chemical equilibrium, the combined mixture of reactants and products present (in constant, unchanging proportions) is called the equilibrium mixture.

In a reversible reaction, as the reaction proceeds, the forward reaction rate decreases and the reverse reaction rate increases, until both become equal — this is the state of dynamic equilibrium. At this point, the concentrations of all reactants and products stop changing (though the forward and reverse reactions contin …

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 markMCQ
$Q. Who enunciated the law of mass action ?$
(a) Gulberg and Waage
(b) Bodenstein
(c) Berthelot
(d) Graham
›Reveal solutionSolution

The law of mass action was given by Guldberg and Waage.

Cato Guldberg and Peter Waage (1864) stated the law of mass action: the rate of a chemical reaction is proportional to the product of the active masses (molar concentrations) of the reactants, each raised to the power of its coefficie …

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 markMCQ
$Q. For which of the following reactions Kp > Kc ?$
(a) N2(g) + 3H2(g) ⇌ 2NH3(g)
(b) H2(g) + I2(g) ⇌ 2HI(g)
(c) PCl3(g) + Cl2(g) ⇌ PCl5(g)
(d) 2SO3(g) ⇌ 2SO2(g) + O2(g)
›Reveal solutionSolution
Kp > Kc requires Δn(gas) > 0; only 2SO3 ⇌ 2SO2 + O2 satisfies this.

The relation is Kp = Kc(RT)^Δn, where Δn = (moles of gaseous products) − (moles of gaseous reactants). Kp > Kc needs Δn > 0.

(A) N2 + 3H2 ⇌ 2NH3: Δn = 2 − 4 = −2 → Kp < Kc.

(B) H2 + I2 ⇌ 2HI: Δn = 2 − 2 = 0 → Kp = Kc. …
Start your 14-day free trial to see the full solution →
CBSE 2026Set ANN1 markMCQ
$Q. Equilibrium constant (Kc) of a reaction depends on :$
(a) temperature
(b) pressure
(c) catalyst
(d) initial concentration
›Reveal solutionSolution
Kc depends only on temperature; it is unaffected by pressure, catalyst or initial concentration. Answer: (a).

The equilibrium constant is a fixed number for a given reaction at a given temperature.

Changing pressure or initial concentration shifts the position of equilibrium but does NOT change Kc. …
Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. In which of the following is Kp less than Kc?$
(a) PCl5 ⇌ PCl3 + Cl2
(b) H2 + Cl2 ⇌ 2HCl
(c) 2SO2 + O2 ⇌ 2SO3
(d) All of these
›Reveal solutionSolution

Kp < Kc only for the reaction where the number of gas moles decreases (Δn negative): 2SO2 + O2 ⇌ 2SO3.

The relation is Kp = Kc(RT)^Δn, where Δn = (moles of gaseous products) - (moles of gaseous reactants). Since RT > 1 (in atm-litre units, for reasonable temperatures), Kp > Kc when Δn is positive, Kp = Kc when Δn = 0, and Kp < Kc when Δn is negative.

Checking each reaction: …

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. If 64 gram of Hydrogen iodide are dissolved in 2 litre of water then its active mass will be$
(a) 0.5
(b) 0.25
(c) 1.0
(d) 2.5
›Reveal solutionSolution

64 g of HI in 2 L of water gives an active mass (concentration) of 0.25 mol/L.

Molar mass of HI = 1 + 127 = 128 g/mol.

Moles of HI = 64 g / 128 g mol^-1 = 0.5 mol.

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. For the following chemical reaction PCl3(g) + Cl2(g) ⇌ PCl5(g). The value of Kc at 250°C is 26 then the value of Kp at this temperature will be$
(a) 0.61
(b) 0.57
(c) 0.83
(d) 0.46
›Reveal solutionSolution

For PCl3(g) + Cl2(g) ⇌ PCl5(g) at 250°C, Kp ≈ 0.61.

Δn = (moles of gaseous product) - (moles of gaseous reactants) = 1 - 2 = -1.

T = 250°C + 273 = 523 K. R = 0.0821 L atm K^-1 mol^-1.

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. For a reversible reaction A + B (equilibrium arrows) C + D, the equilibrium constant Kc is equal to$
(a) [A][B] / [C][D]
(b) [C][A] / [B][D]
(c) [C][D] / [B][A]
(d) [A][D] / [B][C]
›Reveal solutionSolution

Kc = (concentrations of products, each raised to its coefficient) / (concentrations of reactants, each raised to its coefficient) — for A + B <=> C + D, that's [C][D]/[A][B].

For a general reversible reaction at equilibrium:

aA + bB <=> cC + dD

The law of mass action gives the equilibrium constant expression as:

Kc = [C]^c [D]^d / ([A]^a [B]^b)

Here the reaction is A + B <=> C + D (all coefficients = 1), so:

Kc = [C][D] / [A][B]

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. If the value of Kc for the equilibrium 2NOCl(g) <=> 2 NO(g) + Cl2(g) is 9.0 x 10^-4 mol L^-1 then numerical value of Kc for the equilibrium NOCl(g) <=> NO(g) + 1/2 Cl2(g) will be.................$
(a) 4.5 x 10^-4
(b) 3.0 x 10^-4
(c) 4.5 x 10^-2
(d) 3.0 x 10^-2
›Reveal solutionSolution

Halving all coefficients of a balanced equation converts K to sqrt(K). Since the given Kc = 9.0x10^-4 is for the doubled reaction, the halved reaction's Kc is sqrt(9.0x10^-4) = 3.0x10^-2.

For the reaction 2NOCl(g) <=> 2NO(g) + Cl2(g):

Kc = [NO]^2[Cl2] / [NOCl]^2 = 9.0x10^-4

The second reaction, NOCl(g) <=> NO(g) + 1/2 Cl2(g), is exactly half of the first reaction (all coefficients divided by 2).

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 mark
$Q. Case study: A chemist while studying a number of equilibria found that there was a relationship between Kp and Kc. He tested this relation upon various equilibria at different temperatures and the relation was found to be true. He further noticed that for certain equilibria Kp and Kc were equal, however it was not always true. Based on above study answer the following question:$
(b) Under what condition Kp and Kc are equal?
›Reveal solutionSolution

From Kp = Kc(RT)^delta-n, the two constants become equal exactly when the exponent delta-n is zero, i.e., when there is no change in the total number of moles of gas between reactants and products.

From the derived relation, Kp = Kc(RT)^delta-n, where delta-n = (moles of gaseous products) - (moles of gaseous reactants).

If delta-n = 0 (i.e., the number of moles of gaseous species is the same on both sides of the balanced equation), then (RT)^delta-n = (RT)^0 = 1, and the relation simplifies to:

Kp = Kc

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 mark
$Q. Case study: A chemist while studying a number of equilibria found that there was a relationship between Kp and Kc. He tested this relation upon various equilibria at different temperatures and the relation was found to be true. He further noticed that for certain equilibria Kp and Kc were equal, however it was not always true. Based on above study answer the following question:$
(c) Write the relation between Kp and Kc for the equilibrium 2H2(g) + O2(g) <=> 2H2O(g)
›Reveal solutionSolution

With delta-n = 2 - (2+1) = -1 for this reaction, the general relation Kp = Kc(RT)^delta-n becomes Kp = Kc(RT)^-1, i.e., Kp = Kc/(RT).

For the equilibrium: 2H2(g) + O2(g) <=> 2H2O(g)

Count gaseous moles:

Reactants: 2 mol H2 + 1 mol O2 = 3 mol of gas

Products: 2 mol H2O = 2 mol of gas

delta-n = (moles of gaseous products) - (moles of gaseous reactants) = 2 - 3 = -1

Using the general relation Kp = Kc(RT)^delta-n:

Kp = Kc(RT)^(-1) = Kc / (RT)

…

Start your 14-day free trial to see the full solution →

←Previous question · EXERCISES6.13 — The equilibrium constant expression for a gas reaction is Kc = ([NH₃]⁴…→Next question · EXERCISES6.15 — At 700 K, equilibrium constant for the reaction: H2 (g) + I2 (g) ⇌ 2HI…

Q.One mole of H 2O and one mole of CO are taken in 10 L vessel and heated to 725 K. At equilibrium 40% of water (by mass) reacts with CO according to the equation, H2O

🎓Unlock everything free for 14 days

Unlock everything free for 14 days