Q.If A′=[−2132] and B=[−1102], then find (A+2B)′
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Matrix Transpose
Matrix Transpose
The transpose is one of the simplest yet most useful operations on a matrix: you flip the matrix across its main diagonal, so that its rows become columns and its columns become rows.
The intuition
Picture writing a table of marks with students down the rows and subjects across the columns. If instead you want subjects down the rows and students across the columns, you don't recollect the data — you just turn the table on its side. That turn is the transpose.
The precise definition
If A=[aij] is a matrix of order m×n, its transpose, written A′ (or AT), is the n×m matrix obtained by interchanging rows and columns:
A′=[aji],so the (i,j) entry of A′ is the (j,i) entry of A.
The entry in row i, column j of A moves to row j, column i of A′.
A worked look
A=[205314]2×3⟹A′=2510343×2.
The first row (2,5,1) of A has become the first column of A′.
Properties you must know
For matrices A,B of suitable orders and a scalar k:
- (A′)′=A — transposing twice returns the original.
- (kA)′=kA′ — a scalar comes straight through.
- (A+B)′=A′+B′ — transpose distributes over addition.
- (AB)′=B′A′ — the reversal law: the transpose of a product reverses the order of the factors. …
Concept: Matrix Transpose — the transpose of a sum equals the sum of the transposes: (A+2B)′=A′+2B′.
Step 1: Compute 2B′. First, B′=[−1012], so
2B′=[−2024].
Step 2: Add A′ and 2B′: …
Since transpose is linear, (A+2B)′=A′+2B′. Computing B′ from B and adding gives (A+2B)′=[−4156].
The transpose operation distributes over addition and scalar multiplication, so we can work directly with the transposes we are given, without recovering A itself.
For matrices X,Y of the same order and scalar k:
(X+kY)′=X′+kY′
1. Given data.
A′=[−2132],B=[−1102]
2. Transpose B. Swap rows and columns:
B′=[−1012]
3. Scale. …
Method: Computing a transpose of a combination using linearity
To find (A+2B)′ you do not need A itself — the transpose is linear, so (A+kB)′=A′+kB′, letting you work straight from A′ and B.
Steps
Step 1: Apply the linearity rule
Write (A+2B)′=A′+2B′, so only A′ (given) and B′ are needed.
Step 2: Transpose and scale B …
Common Mistakes
Mistake 1: Reconstructing A and transposing again unnecessarily
Why it's wrong: since (A+2B)′=A′+2B′, using the given A′ directly is faster and less error-prone than recovering A. Correct approach: apply the linearity of the transpose.
Mistake 2: Doing only one of "transpose B" and "scale by 2" …
Showing the 12 most recent of 22 on this concept.
- CBSE 2020Set 65/1/11 markQ.If the order of matrix A is 3×2, then the order of matrix A' will be _________.(OR)A square matrix A will be a skew-symmetric matrix, if _________.
›Reveal solutionSolution
- A′ has order 2×3.
- A is skew-symmetric iff A′=−A.
Part (a)
The transpose A′ of a matrix is formed by interchanging its rows and columns: an entry in row i, column j of A moves to row j, column i of A′. So an m×n matrix has an n×m transpose. With A of order 3×2 (m=3,n=2): …
- CBSE 2026Set 65/1/11 markMCQQ.Which of the following properties is/are true for two matrices of suitable orders?(i) (A+B)′=A′+B′(ii) (A−B)′=B′−A′(iii) (AB)′=A′B′(iv) (kAB)′=kB′A′ (k is a scalar) (A)(i) only (B) (i),(ii) and(iii) (C)(i) and(ii) (D)(i) and (iv)
›Reveal solutionSolution
The transpose of a sum is the sum of transposes, and the transpose of a product reverses the order. Only statements (i) and (iv) are correct.
The transpose operation flips a matrix over its diagonal — rows become columns and columns become rows. The key intuition is that transposition distributes over addition but reverses the order of multiplication. This reversal is not arbitrary; it comes from the fact that when you multiply two matrices and then transpose, the dimensions must still match, which forces the order swap.
Let’s check each statement carefully.
-
Statement (i): (A+B)′=A′+B′
This is true. Transposition is a linear operation — adding two matrices and then transposing gives the same result as transposing each first and then adding. Element-wise, the (i,j) entry of (A+B)′ is aji+bji, which is exactly the (i,j) entry of A′+B′.
-
Statement (ii): (A−B)′=B′−A′
This is false. The correct property is (A−B)′=A′−B′, because transposition distributes over subtraction just as it does over addition. The given expression has the order swapped, which is wrong. For example, take A=(1000) and B=(0100); the left side gives (10−10)′=(1−100), while the right side gives (0010)−(1000)=(−1010), which are not equal.
-
Statement (iii): (AB)′=A′B′ …
-
- CBSE 2026Set 65/2/11 markMCQQ.If A=[cosxsinx−sinxcosx] and A+A′=I, then the value of x∈[0,2π] is (A) 0 (B) 4π (C) 3π (D) 2π
›Reveal solutionSolution
The key idea is that A is a rotation matrix, A′ is its transpose (which is also its inverse), and the condition A+A′=I forces the diagonal sum 2cosx=1, giving x=3π.
We are given a 2×2 matrix A that depends on an angle x. The matrix A is a classic rotation matrix: it rotates a vector in the plane by angle x counterclockwise. Its transpose A′ is simply the rotation by −x (clockwise), which is also the inverse of A.
The condition A+A′=I means that when we add the matrix and its transpose, we get the identity matrix. This is a direct equation in the entries of the matrices.
Let’s write it out step by step.
-
Write A and A′ explicitly.
A=[cosxsinx−sinxcosx].
The transpose A′ swaps rows and columns:
A′=[cosx−sinxsinxcosx].
-
Add them entrywise.
A+A′=[cosx+cosxsinx+(−sinx)−sinx+sinxcosx+cosx]=[2cosx002cosx].
Notice the off-diagonal terms cancel perfectly: −sinx+sinx=0 and sinx−sinx=0. So the sum is a diagonal matrix with both diagonal entries equal to 2cosx.
-
Set this equal to I.
The identity matrix I=[1001].
So we require:
[2cosx002cosx]=[1001].
This gives a single equation from the diagonal entries: 2cosx=1.
-
Solve for x in the given interval.
2cosx=1⟹cosx=21. …
-
- CBSE 2026Set A1 markMCQQ.A=[4 2 3]⇒A′=(a) [4 2 3](b) 324(c) [3 2 4](d) 423
›Reveal solutionSolution
Transpose turns the row [4 2 3] into the column 423.
The transpose A′ (or AT) interchanges rows and columns, keeping each entry's value. A 1×3 row matrix becomes a 3×1 column matrix with the entries listed top-to-bottom in the same ord …
- CBSE 2026Set ANNUAL1 markMCQQ.If the order of the matrix A is 2×3 then the order of the matrix (A')' is:(a) 2×3(b) 3×2(c) 2×2(d) 3×3
›Reveal solutionSolution
The transpose of the transpose of a matrix is the matrix itself, so (A′)′=A, which has the same order as A.
For any matrix A, the property (A′)′=A always holds (taking the transpose twice returns the original matrix).
…
- CBSE 2026Set ANNUAL1 markMCQQ.If A = [[cos α, −sin α], [sin α, cos α]], then A + A' = I if the value of α is(a) π/6(b) π/3(c) π(d) 3π/2
›Reveal solutionSolution
Adding A to its transpose cancels the sine terms and leaves a diagonal matrix of 2cosα; setting this equal to I pins down α.
A=(cosαsinα−sinαcosα), so A′=(cosα−sinαsinαcosα).
A+A′=(2cosα002cosα)
…
- CBSE 2025Set E1 markMCQQ.A=[123]⇒A′=(a) [123](b) 321(c) [321](d) 123
›Reveal solutionSolution
Transposing the row [123] gives the column 123.
The transpose A′ turns rows into columns while keeping the entries in the same order. So the 1×3 matrix A=[123] becomes the 3×1 matrix …
- CBSE 2025Set A1 markMCQQ.If A=[cosαsinα−sinαcosα] and A+A′=I, then the value of α is:(a) 6π(b) π(c) 23π(d) 3π
›Reveal solutionSolution
Compute A′ (transpose), add to A, and match to the identity matrix.
A=[cosαsinα−sinαcosα],A′=[cosα−sinαsinαcosα]
A+A′=[2cosα002cosα]
…
- CBSE 2025Set ANNUAL1 markQ.If order of the matrix A is 3×2 then order of matrix (A')' is ______.
›Reveal solutionSolution
Taking the transpose twice returns the original matrix, so its order is unchanged.
…
- CBSE 2024Set D1 markMCQQ.If A=[232−2052] then A′=(a) 220−322/5(b) 2203−22/5(c) 3−2−2/5220(d) [32−222/50]
›Reveal solutionSolution
The transpose A′ turns each row of A into a column.
A=[232−2052] is 2×3, so A′ is 3×2 with columns equal to the rows of A: …
- CBSE 2024Set ANNUAL1 markMCQQ.If A is a matrix of order 2×3 and B is a matrix of order 3×4, then the order of (AB)′ is(a) 2×3(b) 2×4(c) 4×2(d) 3×4
›Reveal solutionSolution
Order of AB is (rows of A) × (columns of B); a transpose swaps rows and columns.
A is 2×3 and B is 3×4. Since the number of columns of A (=3) equals the number of rows of B (=3), AB is defined and has order (rows of A) × (columns of B) =2×4.
…
- CBSE 2024Set ANNUAL1 markQ.If A=1243×1 and B=[201]1×3, then find the matrix (AB)', where (AB)' is the transpose of matrix (AB).
›Reveal solutionSolution
First multiply A (3×1) and B (1×3) to get a 3×3 matrix, then transpose it.
Given A=1243×1 and B=[201]1×3.
Step 1: Compute AB (3×3).
AB=124[201]=1(2)2(2)4(2)1(0)2(0)4(0)1(1)2(1)4(1)=248000124
…
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.