Q.Let C be the set of complex numbers. Prove that the mapping f:C→R given by f(z)=∣z∣, ∀z∈C, is neither one-one nor onto.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — One One Onto
One-One Onto (Bijective) Functions
Picture seating students on chairs so that every student gets a chair, every chair is used, no two students share one and none is left empty. A function that manages this perfect pairing between its domain and codomain is one-one onto, or bijective.
One-one (injective)
f is one-one if different inputs always give different outputs — no two students on one chair. Formally, f(x1)=f(x2)⟹x1=x2 (equivalently x1=x2⟹f(x1)=f(x2)).
f(x)=2x on R is one-one, since 2a=2b⇒a=b. But f(x)=x2 is not: f(2)=f(−2)=4 while 2=−2.
Onto (surjective)
f is onto if every element of the codomain is actually hit — no chair left empty. Formally, for every y in the codomain there is some x with f(x)=y. Here f(x)=2x is onto (take x=y/2), whereas f:R→R, f(x)=x2 is not, since negative values are never outputs.
Both together — bijective
A function that is one-one and onto is bijective: a one-to-one correspondence in which the two sets match up exactly.
One-one and onto are independent properties. f(x)=ex (from R to R) is one-one but not onto; f(x)=x3−x is onto but not one-one. You must verify both.
Why it matters
Only a bijection has a genuine inverse function: because each output comes from exactly one input (one-one) and every codomain element is used (onto), the map can be reversed unambiguously. …
Concept: Function Properties (One-One and Onto)
A function is one-one if distinct inputs give distinct outputs, and onto if every element of the codomain has a preimage.
Step 1 – Not one-one:
Take z1=1 and z2=−1. Both are in C and f(1)=∣1∣=1, f(−1)=∣−1∣=1. Since 1=−1 but f(1)=f(−1), the function is not injective.
Step 2 – Not onto: …
The modulus function f(z)=∣z∣ collapses all points on a circle to the same real number (not one‑one) and never outputs a negative real number (not onto).
We need to check two properties: injectivity (one‑one) and surjectivity (onto).
The function is f(z)=∣z∣, the distance of z from the origin in the complex plane.
A single real output corresponds to infinitely many complex inputs — that immediately suggests it cannot be one‑one.
And since a distance is never negative, the codomain R contains numbers that are never reached — so it cannot be onto.
Let’s verify each formally.
1. One‑one (injective)
A function is one‑one if f(z1)=f(z2) implies z1=z2.
Take z1=1 and z2=−1. Both are in C.
f(1)=∣1∣=1,f(−1)=∣−1∣=1.
So f(1)=f(−1) but 1=−1.
That’s a direct counterexample. Hence f is not one‑one.
In fact, every point on the circle ∣z∣=r maps to the same real number r. So infinitely many inputs give the same output — the function is many‑one.
2. Onto (surjective)
A function is onto if every element of the codomain R is the image of some z∈C. …
Method: Disproving one-one and onto by counterexample
To show a function is neither injective nor surjective, one concrete counterexample for each suffices.
Steps
Step 1: Break one-one with two equal outputs
Find distinct inputs x1=x2 with f(x1)=f(x2). For the modulus map, z=1 and z=−1 both give ∣z∣=1, so it is not one-one.
Step 2: Break onto by exposing a missed codomain value
Identify the actual range and find a codomain element outside it. Since ∣z∣≥0, no complex number maps to a negative real, so the map onto R is not surjective. …
Common Mistakes
Mistake 1: Thinking "onto" just means the range is non-empty
Why it's wrong: onto requires the range to equal the whole codomain; here the range [0,∞) misses negative reals. Correct approach: compare range against codomain and exhibit a missed value like −5.
Mistake 2: Trying to prove non-injectivity in general instead of one counterexample …
Showing the 12 most recent of 45 on this concept.
- CBSE 2026Set CX1 markMCQQ.The function f(x)=2x, x∈R is:(a) one-one but not onto(b) one-one and onto(c) many-one and onto(d) many-one but not onto
›Reveal solutionSolution
f(x)=2x on R is a bijection — both one-one and onto — option (b).
One-one: If f(x1)=f(x2) then 2x1=2x2⇒x1=x2. So f is injective.
…
- CBSE 2026Set ANNUAL1 markMCQQ.Let f:R→R defined as f(x)=3−4x, then f(x) is:(a) one-one onto(b) onto only(c) neither one-one nor onto(d) none of these
›Reveal solutionSolution
f(x)=3−4x is a linear function with non-zero slope, so it is both one-one and onto.
Given f:R→R, f(x)=3−4x.
One-one: Let f(x1)=f(x2). Then 3−4x1=3−4x2⇒x1=x2. So f is injective.
…
- CBSE 2026Set ANNUAL1 markMCQQ.If A = {0, 1, 4, 9, 16, 25, ......} then function defined by f: Z → A, f(x) = x² is:(a) one-one but not onto(b) onto but not one-one(c) one-one and onto(d) neither one-one nor onto
›Reveal solutionSolution
Two different integers with the same absolute value (like 2 and −2) give the same square, so f is not one-one; but every element of A is a perfect square that some integer squares to, so f is onto.
f:Z→A is defined by f(x)=x2, where A={0,1,4,9,16,25,…} is the set of all perfect squares of non-negative integers.
One-one check: Take x=2 and x=−2. Both are in Z and f(2)=4=f(−2), but 2=−2. Different inputs give the same output — f is not one-one.
…
- CBSE 2026Set ANNUAL1 markMCQQ.Let f : R → R be defined by f(x) = 3x, choose the correct answer:(a) f is one-one onto(b) f is many-one onto(c) f is one-one but not onto(d) f is neither one-one nor onto
›Reveal solutionSolution
f(x)=3x is a straight-line map with non-zero slope, so it is both injective and surjective on R — a bijection.
Checking one-one (injective):
Let f(x1)=f(x2). Then 3x1=3x2⇒x1=x2. So distinct inputs never share an output — f is one-one.
Checking onto (surjective): …
- CBSE 2026Set ANNUAL1 markQ.Prove that the function f:R→R, given by f(x)=2x, is both one-one and onto.
›Reveal solutionSolution
Prove injectivity by showing f(x1)=f(x2) forces x1=x2, and prove surjectivity by exhibiting a pre-image for an arbitrary y∈R.
Given f:R→R, f(x)=2x.
Step 1: One-one (injective).
Let x1,x2∈R such that f(x1)=f(x2).
2x1=2x2⟹x1=x2
So f(x1)=f(x2)⟹x1=x2, hence f is one-one.
Step 2: Onto (surjective).
Let y∈R be arbitrary (any element of the codomain). We need x∈R (the domain) such that f(x)=y.
…
- CBSE 2026Set ANNUAL1 markMCQQ.Let f:R→R be defined as f(x)=x4. Then(a) f is one-one and onto(b) f is many-one and onto(c) f is one-one but not onto(d) f is neither one-one nor onto
›Reveal solutionSolution
Find a counter-example pair with equal outputs to disprove one-one, and note the range excludes negative numbers to disprove onto.
Given f:R→R, f(x)=x4.
One-one? Consider x1=1 and x2=−1:
f(1)=14=1,f(−1)=(−1)4=1
f(1)=f(−1)=1 but 1=−1. So f is not one-one (it is many-one).
…
- CBSE 2025Set 65/4/11 markMCQQ.For real x, let f(x)=x3+5x+1. Then : (A) f is one-one but not onto on R (B) f is onto on R but not one-one (C) f is one-one and onto on R (D) f is neither one-one nor onto on R
›Reveal solutionSolution
The function f(x)=x3+5x+1 is strictly increasing (since f′(x)=3x2+5>0 for all real x), so it is one-one. As a cubic with odd degree and positive leading coefficient, its range is all real numbers, so it is onto R. Hence the correct option is (C).
-
Understanding one-one (injective) — why the derivative tells the story
A function is one-one if different inputs give different outputs. For a differentiable function, a sufficient condition is that the derivative never changes sign — that is, the function is strictly monotonic (always increasing or always decreasing).
Here, f′(x)=3x2+5. Since x2≥0 for all real x, we have 3x2≥0, so 3x2+5≥5>0. The derivative is always positive.
Therefore f is strictly increasing on R. A strictly increasing function is automatically one-one: if x1<x2, then f(x1)<f(x2), so no two distinct x's can map to the same y.
-
Understanding onto (surjective) — why the range is all reals
A function f:R→R is onto if every real number appears as an output. For a polynomial of odd degree with a positive leading coefficient, the end behaviour guarantees this:
- As x→−∞, x3→−∞, so f(x)→−∞.
- As x→+∞, x3→+∞, so f(x)→+∞. Since f is continuous (every polynomial is continuous), by the Intermediate Value Theorem it takes every value between −∞ and +∞. That is, the range is R. …
-
- CBSE 2025Set 65/4/11 markMCQQ.If f:N→W is defined as f(n)={2n,0,if n is evenif n is odd, then f is : (A) injective only (B) surjective only (C) a bijection (D) neither surjective nor injective
›Reveal solutionSolution
The function maps all odd naturals to 0 and each even natural to half its value, so it is surjective onto W (every whole number is hit) but not injective (many inputs give the same output). The correct option is (B).
The core idea here is to understand what the function does to its domain, N (the set of natural numbers, typically {1,2,3,…}), and where it lands, W (the set of whole numbers, {0,1,2,3,…}). The definition splits the domain into two clear cases: odd numbers and even numbers.
For every odd natural number — 1, 3, 5, 7, … — the output is 0. That means infinitely many inputs all map to the single output 0. That alone kills injectivity: a function is injective (one-to-one) only if different inputs always give different outputs. Here, f(1)=0, f(3)=0, f(5)=0, and so on, so it is clearly not injective.
For every even natural number — 2, 4, 6, 8, … — the output is half of that number. So f(2)=1, f(4)=2, f(6)=3, f(8)=4, and so on. This gives us every positive whole number exactly once. And the odd numbers already cover 0. So every whole number — 0, 1, 2, 3, … — appears as an output at least once. That makes the function surjective (onto).
Let’s walk through it step by step.
-
Check injectivity (one-to-one)
Take two different inputs, say n=1 and n=3. Both are odd, so f(1)=0 and f(3)=0. Since 1=3 but f(1)=f(3), the function is not injective.
Watch outA common mistake is to only check the even case and think the function looks one-to-one. But the odd case collapses everything to 0 — that’s the trap.
-
Check surjectivity (onto)
We need to see if every element of W (the codomain) is actually hit by some n in N. …
-
- CBSE 2025Set ANNUAL1 markMCQQ.Let f:R→R be defined as f(x)=x2, where R is the set of real numbers. Choose the correct answer:(a) f is one-one onto(b) f is many-one onto(c) f is one-one but not onto(d) f is neither one-one nor onto
›Reveal solutionSolution
f(x)=x2 on R→R is neither one-one nor onto.
Not one-one: f(−1)=1=f(1) but −1=1, so two different inputs give the same output.
…
- CBSE 2025Set IX1 markMCQQ.The modulus function f:R→R+ given by f(x)=∣x∣ is(a) one-one and onto(b) many-one and onto(c) one-one but not onto(d) neither one-one nor onto
›Reveal solutionSolution
f(x)=∣x∣ is many-one (as f(2)=f(−2)) and onto R+; option (b).
Concept. A function is one-one if different inputs give different outputs, and onto if every element of the codomain is actually attained.
One-one? Take x=2 and x=−2: f(2)=∣2∣=2 and f(−2)=∣−2∣=2. Two different inputs share the same image, so f is many-one.
…
- CBSE 2025Set A1 markMCQQ.If f:R→R be defined as f(x)=3x, then(a) f is one-one onto.(b) f is many one onto.(c) f is one-one but not onto.(d) f is neither one-one nor onto.
›Reveal solutionSolution
A linear function f(x)=3x with non-zero slope is always a bijection on R.
Checking one-one (injective): Suppose f(x1)=f(x2) for x1,x2∈R.
3x1=3x2⟹x1=x2
So distinct inputs always give distinct outputs — f is one-one.
…
- CBSE 2025Set A1 markQ.Write True or False: If a function f is invertible, then f must be one-one and onto.
›Reveal solutionSolution
Invertibility of a function is EQUIVALENT to it being a bijection; this is a standard NCERT theorem.
A function f:A→B is invertible if there exists g:B→A such that g∘f=IA and f∘g=IB. It is a proven theorem that f is invertible if and only if f is a bijection (both one-one and onto): …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.