A metallic spherical shell has an inner radius $R_1$ and outer radius $R_2$. A charge $Q$ is placed at the centre of the spherical cavity. What will be the surface charge density on (i) the inner surface, and (ii) the outer surface?

A metallic spherical shell has an inner radius R₁ and outer radius R₂. A charge Q is placed at the centre of t

NCERT Exemplar · Q15

R_1

(i) the inner surface, and

(ii) the outer surface?

CBSEShort· 2mImportance★★★★★

75% · 50/67 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Gauss Law

Gauss's Law is a shortcut. Instead of adding up the Coulomb contribution of every charge — a nightmare of vectors and integrals — it lets you read the field straight off the symmetry of a problem. The whole idea rests on one quantity: electric flux.

Flux — field-lines counted through a surface. For a uniform field E crossing a flat area A, the flux is Φ = E·A = EA cosθ, where θ is the angle between the field and the normal to the surface. Picture the field as a bundle of lines; flux is how many pierce the surface. When E is edge-on (θ = 90°) nothing passes through and Φ = 0; when E is ⊥ to the surface (θ = 0) the count is maximal. For a closed surface, Φ is the net number of lines leaving it — lines that enter and exit cancel.

The law itself. Gauss's law states that the net flux out of any closed surface depends only on the charge trapped inside:

Φ = q_enclosed / ε₀.

Two consequences do most of the work. First, only enclosed charge counts — a charge outside sends as many lines in as out, so its net contribution is exactly zero. Second, the surface's shape is irrelevant; move the charge around inside or deform the surface, and Φ never changes.

Why symmetry makes it powerful. By itself Φ = q/ε₀ has E buried in an integral. It becomes a tool only when you pick a Gaussian surface matched to the symmetry — one where E is constant and everywhere either ⊥ to the surface (so Φ = EA) or ∥ to it (contributing nothing). Then E slides out and you solve in one line. This works for exactly three geometries:

1 — Infinite line charge (linear density λ). Use a coaxial cylinder: E = λ / 2πε₀r, falling off as ∝ 1/r.

2 — Infinite sheet (surface density σ). Use a pillbox pierced through the sheet: E = σ / 2ε₀ — uniform and completely independent of distance. The field near a large charged plane simply doesn't weaken as you step back. …

Why this formula?

Gauss's Law: Why It Holds

Gauss's Law is one of the four Maxwell's equations and a cornerstone of electromagnetism. Let's build the understanding from the ground up — not just the formula, but the why.

1. The Core Idea: Flux as "Flow" of Field

Imagine an electric field $\vec{E}$ passing through a small patch of area $dA$ . The electric flux through that patch is:

d\Phi_E = \vec{E} \cdot d\vec{A} = E \, dA \cos\theta

where $\theta$ is the angle between $\vec{E}$ and the outward normal to the surface.

Why this definition?

If $\vec{E}$ is perpendicular to the surface ( $\theta = 0$ ), maximum field "flows through".
If $\vec{E}$ is parallel ( $\theta = 90^\circ$ ), no flux — the field just slides along the surface.

Total flux through a closed surface $S$ is:

\Phi_E = \oint_S \vec{E} \cdot d\vec{A}

2. The Key Insight: Flux Depends Only on Enclosed Charge

Consider a single point charge $+q$ at the centre of a spherical surface of radius $r$ .

By Coulomb's law, at every point on the sphere: $E = \frac{1}{4\pi\varepsilon_0} \frac{q}{r^2}$ , radially outward.
The area vector $d\vec{A}$ is also radially outward.
So $\vec{E} \cdot d\vec{A} = E \, dA$ everywhere.

The total flux:

\Phi_E = \oint E \, dA = E \oint dA = \left( \frac{1}{4\pi\varepsilon_0} \frac{q}{r^2} \right) (4\pi r^2) = \frac{q}{\varepsilon_0}

Notice: The $r^2$ cancels! The flux is independent of the radius.

3. Why Shape Doesn't Matter

Now, what if the surface is not spherical but any closed shape enclosing the charge?

Draw a small cone from the charge to the surface.
The flux through a patch $dA$ at distance $r$ is $d\Phi = \frac{1}{4\pi\varepsilon_0} \frac{q}{r^2} \cos\theta \, dA$ .
But $\frac{\cos\theta \, dA}{r^2}$ is exactly the solid angle $d\Omega$ subtended by $dA$ at the charge.

So $d\Phi = \frac{q}{4\pi\varepsilon_0} d\Omega$ .

Integrating over the entire closed surface: $\oint d\Omega = 4\pi$ (total solid angle around a point).

Hence:

\Phi_E = \frac{q}{4\pi\varepsilon_0} \cdot 4\pi = \frac{q}{\varepsilon_0}

Result: For any closed surface enclosing $q$ , the flux is $\frac{q}{\varepsilon_0}$ .

4. Multiple Charges: Superposition

If there are many charges $q_1, q_2, \dots, q_n$ inside the surface, the total electric field is the vector sum of individual fields:

\vec{E} = \vec{E}_1 + \vec{E}_2 + \dots + \vec{E}_n

Flux is linear: …

Start your 14-day free trial to unlock the full solution →

Electrostatic induction forces charge $-Q$ onto the inner surface and $+Q$ onto the outer surface. The densities are $\sigma_{\text{inner}} = -\frac{Q}{4\pi R_1^2}$ and $\sigma_{\text{outer}} = +\frac{Q}{4\pi R_2^2}$ .

When a charge sits inside a conducting cavity, the conductor responds by rearranging its free electrons until equilibrium is reached. The key insight is that the electric field inside a conductor must be zero in electrostatic equilibrium. This constraint, combined with Gauss's law, tells us exactly how charge distributes on the surfaces.

The charge $Q$ at the center creates an electric field that would penetrate into the metal. But conductors won't allow that—electrons move until they cancel any internal field. This movement leaves one surface with a deficit of electrons (positive charge) and the other with an excess (negative charge).

Finding the charge distribution

1. Apply Gauss's law inside the conductor

Draw a Gaussian surface anywhere inside the metal itself (between $R_1$ and $R_2$ ). Since the electric field is zero throughout the conductor, the flux through this surface is zero:

\oint \vec{E} \cdot d\vec{A} = 0

By Gauss's law, this means the enclosed charge is zero:

Q_{\text{enclosed}} = \epsilon_0 \cdot 0 = 0

2. Determine the charge on the inner surface

The Gaussian surface encloses both the central charge $Q$ and whatever charge $q_{\text{inner}}$ sits on the inner surface at radius $R_1$ . For the total to be zero:

Q + q_{\text{inner}} = 0

Therefore:

q_{\text{inner}} = -Q

The inner surface must carry charge $-Q$ to neutralize the field inside the conductor.

3. Determine the charge on the outer surface

The spherical shell as a whole is electrically neutral (we started with an uncharged conductor). If the inner surface has $-Q$ , and the total charge on the shell is zero, then:

q_{\text{outer}} = +Q

The outer surface carries $+Q$ .

Tip

A quick check: the conductor had zero net charge initially, so $q_{\text{inner}} + q_{\text{outer}} = -Q + Q = 0$ . ✓

Computing the surface charge densities

4. Inner surface density

The charge $-Q$ spreads uniformly over the inner spherical surface of area $4\pi R_1^2$ : …

Start your 14-day free trial to unlock the full solution →

Here are the common mistakes students make on this classic electrostatics problem, along with how to avoid each.

Mistake 1: Forgetting that charge resides only on the surfaces of a conductor

Many students assume the charge $Q$ at the centre somehow "spreads" throughout the shell material.

Why this is wrong: In electrostatic equilibrium, net charge inside a conductor is zero. The field inside the conducting material must be zero.

How to avoid:

Draw a Gaussian surface inside the conductor (between $R_1$ and $R_2$ ).
Since $E = 0$ inside the conductor, the total enclosed charge must be zero.
This forces the inner surface to acquire a charge of $-Q$ (to cancel the $+Q$ at the centre).

Mistake 2: Thinking the inner and outer surface charges are independent

Some students calculate the inner surface charge density correctly but then forget that the shell itself is neutral (unless stated otherwise).

Why this is wrong: The shell is uncharged overall. If the inner surface gets $-Q$ , the outer surface must get $+Q$ to keep the net charge zero.

How to avoid:

Always check conservation of charge for the conductor.
If the shell has a net charge $Q_{\text{net}}$ , then:

Q_{\text{outer}} = Q_{\text{net}} - Q_{\text{inner}}

In this problem, $Q_{\text{net}} = 0$ , so $Q_{\text{outer}} = +Q$ .

Mistake 3: Using the wrong area for surface charge density

Students often use the wrong radius when computing $\sigma = \frac{Q}{A}$ .

Common errors:

Using $R_2$ for the inner surface area.
Using $R_1$ for the outer surface area.
Forgetting that area is $4\pi r^2$ , not $\pi r^2$ .

How to avoid:

Inner surface area = $4\pi R_1^2$
Outer surface area = $4\pi R_2^2$
Then:

\sigma_{\text{inner}} = \frac{-Q}{4\pi R_1^2}

\sigma_{\text{outer}} = \frac{+Q}{4\pi R_2^2}

Mistake 4: Confusing the sign of the induced charge

Some students write $\sigma_{\text{inner}}$ as positive, thinking the central $+Q$ "repels" positive charge to the inner surface.

Why this is wrong: The central $+Q$ attracts negative charge to the inner surface (opposites attract). The induced charge on the inner surface is negative.

How to avoid:

Use the Gaussian surface argument: Inside conductor, $E = 0 \implies Q_{\text{enclosed}} = 0$ So $Q_{\text{inner}} + Q_{\text{centre}} = 0 \implies Q_{\text{inner}} = -Q$
The sign follows automatically from this condition.

--- …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

Showing the 12 most recent of 37 on this concept.

CBSE 2026Set A1 markMCQ
$Q. S.I. unit of electric flux is (A) Vm (B) Vm^2 (C) Jm (D) NC^-1$
›Reveal solutionSolution

Φ = E·A → (V/m)(m²) = V·m.

Electric flux is $\Phi = \vec{E}\cdot\vec{A}$ .

Unit of electric field $E$ = N/C = V/m (volt per metre).

Unit of area $A$ = m².

…

Start your 14-day free trial to see the full solution →
CBSE 2026Set A1 markMCQ
$Q. The surface charge densities on the surface of two conducting spheres of radii r1 and r2 are equal. The ratio of electric field intensities on the surfaces is (A) r1/r2 (B) r1^2/r2^2 (C) r2^2/r1^2 (D) 1 : 1$
›Reveal solutionSolution

Just outside a charged conductor E = σ/ε₀; with equal σ the fields are equal (1:1).

The electric field just outside the surface of a charged conductor is

$E = \frac{\sigma}{\varepsilon_0},$

which depends only on the local surface charge density σ, not on the radius.

…

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 markMCQ
$Q. Electric flux is a$
(a) scalar quantity
(b) vector quantity
(c) scalar or vector quantity
(d) constant quantity
›Reveal solutionSolution

Electric flux is a scalar quantity, even though it is defined using two vectors.

Electric flux through a surface is defined as

$\Phi = \oint \vec{E}\cdot d\vec{A}$

Although $\vec{E}$ (electric field) and $d\vec{A}$ (area vector, normal to the surface element) are both vectors, their dot product $\vec{E}\cdot d\vec{A} = E\,dA\cos\theta$ is a single number (magnitude only, with a sign depending on $\theta$ ) — it …

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 markMCQ
$Q. A charge Q, is enclosed by a Gaussian spherical surface of radius R. If the radius is doubled, then the outward electric flux will$
(a) decrease to half
(b) increase two times
(c) remain unchanged
(d) increase four times
›Reveal solutionSolution

Gauss's law: flux through any closed surface = Q_enclosed / epsilon_0, and this does NOT depend on the surface's size or shape.

Gauss's law states that for any closed (Gaussian) surface,

flux (phi) = Q_enclosed / epsilon_0

Here the same charge Q sits at the centre of the sphere both before and after the radius is doubled - the enclosed charge Q_enclosed is unchanged. Since flux depends ONLY on Q_enclosed and the permittivity of free space epsilon_0 (both unchanged here), the flux does not change even though the surface area (4piR^2) has increased fourfold. Doubling R spreads the same total flux over 4 ti …

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 markMCQ
$R$
(a) increases as $r$ increases for $r<R$ and for $r>R$
(b) is zero as $r$ increases for $r<R$ and decreases as $r$ increases for $r>R$
(c) is zero as $r$ increases for $r<R$ and increases as $r$ increases for $r>R$
(d) decreases as $r$ increases for $r<R$ and for $r>R$
›Reveal solutionSolution

A charged conducting (hollow metal) sphere carries all its charge on the outer surface. Gauss's law gives $E=0$ inside and $E\propto 1/r^2$ (decreasing) outside.

Setting up Gauss's law

For a hollow, uniformly charged conducting sphere of radius $R$ and total charge $Q$ , all the charge resides on the outer surface (a fundamental property of conductors in electrostatic equilibrium — free charges repel each other and move to the surface where the electric field inside the conducting material is zero).

Take a concentric spherical Gaussian surface of radius $r$ .

Case 1: $r<R$ (inside the shell)

The Gaussian surface of radius $r$ encloses no charge, because all the charge $Q$ lies on the surface at radius $R>r$ .

$\oint \vec E\cdot d\vec A = \frac{Q_{\text{enc}}}{\varepsilon_0} = 0 \implies E=0$

This is true for every $r<R$ — the field is zero throughout the interior, it does not "increase" or "decrease," it is simply zero.

Case 2: $r>R$ (outside the shell)

Now the Gaussian surface encloses the entire charge $Q$ . By spherical symmetry, $\vec E$ is radial and has the same magnitude everywhere on the Gaussian sphere, so

…

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 mark
$Q. Match the Column A with Column B and write the correct pair. Column A: Electric flux. Column B:$
(i) μ₀nI,
(ii) Volt × second,
(iii) μ₀nI/2,
(iv) Volt × meter,
(v) Volt × meter⁻¹,
(vi) Volt.
›Reveal solutionSolution

Electric flux φ_E = E·A; unit = (V/m)(m²) = V·m, option (iv).

Electric flux through a surface is φ_E = E·A (for a uniform field perpendicular to area A). The SI unit of electric field E is volt per metre (V/m) = N/C, and area is in m². Therefore the unit of electric flux is

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set D1 markMCQ
$Q. Gauss's law states that the electric flux through a closed surface is (A) proportional to the charge enclosed (B) inversely proportional to the charge enclosed (C) zero (D) proportional to the square of the charge enclosed$
›Reveal solutionSolution

Gauss's law states the total electric flux through a closed surface equals the enclosed charge divided by ε₀, so Φ ∝ q_enclosed.

Gauss's law is written as

$\oint \vec{E}\cdot d\vec{A} = \frac{q_{enc}}{\varepsilon_0}$

The left side is the total electric flux Φ through the closed (Gaussian) surface. Thus

$\Phi = \frac{q_{enc}}{\varepsilon_0}$

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set D1 markMCQ
$Q. Inside a closed surface n electric dipoles are situated. The electric flux coming out from the closed surface will be (A) q/ε0 (B) 2q/ε0 (C) nq/ε0 (D) zero$
›Reveal solutionSolution

A dipole has zero net charge, so n dipoles enclose zero charge and the net flux is zero.

Gauss's law states the net electric flux out of a closed surface is Φ = q_enclosed/ε₀.

Each electric dipole consists of +q and −q; its net charge is +q + (−q) = 0. With n dipoles inside, the total enclosed charge is n × 0 = 0.

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set A1 mark
$Q. Write True or False: Inside a conductor, electrostatic field is zero.$
›Reveal solutionSolution

The statement is True: the electrostatic field inside a conductor is zero in equilibrium.

In electrostatic equilibrium, free charges in a conductor redistribute themselves on the surface such that the electric field inside the body of the conductor is exactly zero. If there were a residual field inside, it would exert a force on the free electrons, causing them to keep moving — contradicting the assumption …

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. The SI unit of electric flux is$
(a) N C m^2
(b) N C^-1 m^-2
(c) N C^-1 m^2
(d) N^2 C^-1 m^2
›Reveal solutionSolution
Electric flux is the field strength times the perpendicular area through which it passes, so its unit is simply the product of the units of $E$ and area.

Electric flux through a surface is defined as $\Phi_E = \vec{E}\cdot\vec{A}$ (or $\int \vec{E}\cdot d\vec{A}$ for a general surface).

SI unit of electric field $E$ = N C $^{-1}$

SI unit of area $A$ = m $^2$ …
Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. The SI unit of electric flux is:$
(a) $Nm^2C^{-2}$
(b) $NC^{-1}m^2$
(c) $CN^2m^{-1}$
(d) $C^2N^{-1}m^{-2}$
›Reveal solutionSolution

Electric flux $\Phi_E = \vec{E}\cdot\vec{A}$ , so its unit is the unit of $E$ (N C⁻¹) times the unit of area (m²).

Electric flux through a surface is defined as $\Phi_E = \oint \vec{E}\cdot d\vec{A}$ , i.e. the product of the electric field and the area component perpendicular to it.

Since the SI unit of electric field $E$ is newton per coulomb ( $NC^{-1}$ ) and the unit of area $A$ is square metre ( $m^2$ ), the unit of electric flux is:

$NC^{-1} \times m^2 = NC^{-1}m^2$

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. The SI unit of the surface integral of electric field is -$
(a) Vm
(b) V
(c) $NC^{-1}$
(d) $Cm^{-3}$
›Reveal solutionSolution

Electric flux $\Phi_E=\oint\vec{E}\cdot d\vec{A}$ has SI unit V·m (equivalent to N·m $^2$ /C).

The surface integral of the electric field, $\Phi_E = \oint \vec{E}\cdot d\vec{A}$ , is the electric flux. Since $E$ has SI unit V/m (or equivalently N/C) and area has unit m $^2$ , the flux has uni …

Start your 14-day free trial to see the full solution →

←Previous questionQ14 — An arbitrary surface encloses a dipole. What is the electric flux thro…→Next questionQ16 — The dimensions of an atom are of the order of an Angstrom. Thus there …

Q.A metallic spherical shell has an inner radius $R_1$ and outer radius $R_2$ . A charge $Q$ is placed at the centre of the spherical cavity. What will be the surface charge density on

Concept understanding — Gauss Law

Why this formula?

Gauss's Law: Why It Holds

1. The Core Idea: Flux as "Flow" of Field

2. The Key Insight: Flux Depends Only on Enclosed Charge

3. Why Shape Doesn't Matter

4. Multiple Charges: Superposition

Finding the charge distribution

Computing the surface charge densities

Method: Electrostatic Induction in a Conductor (Gauss's Law + Charge Conservation)

Steps:

Mistake 1: Forgetting that charge resides only on the surfaces of a conductor

Mistake 2: Thinking the inner and outer surface charges are independent

Mistake 3: Using the wrong area for surface charge density

Mistake 4: Confusing the sign of the induced charge

Q.A metallic spherical shell has an inner radius R1R_1R1​ and outer radius R2R_2R2​. A charge QQQ is placed at the centre of the spherical cavity. What will be the surface charge density on

Finding the charge distribution

Computing the surface charge densities

🎓Unlock everything free for 14 days

Q.A metallic spherical shell has an inner radius $R_1$ and outer radius $R_2$ . A charge $Q$ is placed at the centre of the spherical cavity. What will be the surface charge density on

Unlock everything free for 14 days