The potential barrier of a p-n junction is plotted on the vertical axis for three different biasing conditions, giving three curves that each rise steeply and then saturate at a constant level. Curve 1 saturates at the HIGHEST barrier value, curve 2 saturates at an intermediate value, and curve 3 saturates at the LOWEST barrier value. The double-headed arrow marks $V_o$, the potential barrier across the junction when no battery is connected, and its height corresponds to the intermediate (curve-2) level. Which of the following is correct? (a) 1 and 3 both correspond to forward bias of the junction. (b) 3 corresponds to forward bias of the junction and 1 corresponds to reverse bias of the junction. (c) 1 corresponds to forward bias and 3 corresponds to reverse bias of the junction. (d) 3 and 1 both correspond to reverse bias of the junction.

> [!TLDR] > The graph plots the junction's potential barrier. Forward bias always *lowers* the barrier below $V_o$, while reverse bias *raises* it above $V_o$. The lowest curve (3) is therefore forward biased and the highest curve (1) is reverse biased. ### Concept The built-in barrier $V_o$ is the potential step a carrier must climb to cross an unbiased junction. An external battery adds to, or subtracts from, this built-in field: - **Forward bias** (p-side made positive) opposes the built-in field, so the net barrier *decreases*: $V_{\text{barrier}} = V_o - V$. - **Reverse bias** (p-side made negative) aids the built-in field, so the net barrier *increases*: $V_{\text{barrier}} = V_o + V$. ### Reading the curves The three curves saturate at different barrier heights, with $V_o$ marked at the intermediate (curve-2) level: - Curve 3 saturates **below** $V_o$ $\Rightarrow$ the barrier has been reduced $\Rightarrow$ **forward bias**. - Curve 1 saturates **above** $V_o$ $\Rightarrow$ the barrier has been raised $\Rightarrow$ **reverse bias**. ### Why the other options fail - (A) and (D) make both curves the same bias, impossible since one lies above $V_o$ and the other below. - (C) reverses the roles; it would require forward bias to *raise* the barrier, contradicting $V_{\text{barrier}} = V_o - V$. > [!ANSWER] > **(B)** curve 3 (lowest barrier) is forward biased and curve 1 (highest barrier) is reverse biased.

The potential barrier of a p-n junction is plotted on the vertical axis for three different biasing conditions

NCERT Exemplar · Q2

V_o

(a) 1 and 3 both correspond to forward bias of the junction.

(b) 3 corresponds to forward bias of the junction and 1 corresponds to reverse bias of the junction.

(d) 3 and 1 both correspond to reverse bias of the junction.

Jammu Kashmir JkboseMCQ· 1mImportance★★★★★

43% · 16/37 Questions

✓ Free question

Concept understanding — P N Junction Biasing

P-N Junction Biasing: The First Meeting

Imagine you have two rooms separated by a door. One room is full of people who want to leave (electrons in the N-side), and the other room is full of empty chairs (holes in the P-side). The door is initially locked — that's the depletion region, a zone with no free charges. Now, what happens if you push on the door from one side, or pull it from the other? That's exactly what biasing does to a P-N junction.

The Unbiased Junction (The Starting Point)

When you bring P-type and N-type semiconductors together, something interesting happens at the boundary. Electrons from the N-side (which has extra electrons) rush toward the P-side (which has extra holes). Holes from the P-side rush toward the N-side. They meet and recombine — an electron falls into a hole, and both disappear as free charges.

This leaves behind a region near the junction with no free charges — just fixed positive ions on the N-side (where electrons left) and fixed negative ions on the P-side (where holes left). This is the depletion region. It acts like a tiny battery: the N-side is positive relative to the P-side, creating a built-in electric field that stops further diffusion. The voltage across this region is about 0.7 V for silicon, 0.3 V for germanium.

Note

The depletion region is not a physical gap — it's a region depleted of mobile charge carriers. The crystal is still continuous.

Forward Bias: Pushing the Door Open

Connect the positive terminal of a battery to the P-side and the negative terminal to the N-side. This is forward bias.

What happens? The external battery's positive terminal repels holes in the P-side toward the junction. The negative terminal repels electrons in the N-side toward the junction. Both carriers are pushed toward each other — they overcome the built-in electric field. The depletion region shrinks.

When the applied voltage exceeds about 0.7 V (for silicon), the depletion region becomes so thin that carriers can cross freely. A large current flows. The junction is now "on" — like a switch closed.

Watch out

Never apply forward bias without a current-limiting resistor. The junction has very low resistance once forward-biased, and the current can destroy it instantly.

Reverse Bias: Pulling the Door Shut

Now reverse the battery: positive to N-side, negative to P-side. This is reverse bias.

The positive terminal attracts electrons from the N-side away from the junction. The negative terminal attracts holes from the P-side away from the junction. Both carriers are pulled apart. The depletion region widens.

The built-in electric field is now reinforced by the external field. Only a tiny current flows — the reverse saturation current, caused by thermally generated electron-hole pairs in the depletion region. This current is typically in the nanoampere range and is almost independent of the applied voltage (until breakdown).

The junction is "off" — like a switch open.

Important

In reverse bias, the depletion region acts as an insulator. The junction blocks current flow except for a negligible leakage current.

The Precise Statement

I = I_S \left( e^{\frac{qV}{nkT}} - 1 \right)

This is the Shockley diode equation. Here:

$I$ = diode current
$I_S$ = reverse saturation current (very small, typically $10^{-12}$ to $10^{-15}$ A for silicon)
$q$ = electron charge ( $1.6 \times 10^{-19}$ C)
$V$ = applied voltage (positive for forward bias, negative for reverse bias)
$n$ = ideality factor (1 for ideal, 1–2 for real diodes)
$k$ = Boltzmann constant ( $1.38 \times 10^{-23}$ J/K)
$T$ = absolute temperature (K)

For forward bias ( $V > 0$ ), the exponential term dominates — current grows rapidly. For reverse bias ( $V < 0$ ), the exponential term becomes negligible, and $I \approx -I_S$ — a tiny constant current.

Summary Table

Condition	Bias	Depletion Region	Current
No external voltage	Unbiased	Moderate width	Zero net current
P positive, N negative	Forward bias	Shrinks	Large (exponential)
P negative, N positive	Reverse bias	Widens	Tiny (saturation)

Why This Matters

Every diode, LED, solar cell, and transistor relies on this principle. A solar cell is just a P-N junction under forward bias from light. A transistor uses two junctions back-to-back. The ability to control current flow with a voltage — to switch between "on" and "off" — is the foundation of all modern electronics.

Tip

Remember the mnemonic: Positive to P-side = Forward bias (current flows). Negative to P-side = Reverse bias (current blocked). The arrow in the diode symbol points from P to N — the direction of conventional current when forward-biased.

Forward and reverse biasing of the p-n junction, along with the Shockley diode equation, is a core numerical and conceptual topic in the NCERT Class 12 Physics Semiconductor Electronics chapter, frequently searched as "p-n junction biasing important questions" by CBSE board and JEE Main aspirants. This concept is also essential groundwork for understanding rectifiers and transistor circuits covered later in the same syllabus.

Why this formula?

Why a PN Junction Biases the Way It Does

A PN junction is not a resistor. Its current-voltage behaviour is fundamentally asymmetric — and that asymmetry comes directly from the physics of the depletion region and the energy barrier it creates.

The Unbiased Junction: A Built-in Barrier

When P-type and N-type semiconductors are joined, holes from the P-side diffuse into the N-side, and electrons from the N-side diffuse into the P-side. This diffusion leaves behind fixed, charged ions: negative acceptor ions on the P-side, positive donor ions on the N-side. These ions create an electric field that opposes further diffusion.

The result is a depletion region — a zone with no free carriers — and a built-in potential $V_0$ across it. This potential acts as an energy barrier that prevents net current flow at equilibrium.

Important

At equilibrium (zero bias), the net current is zero. The diffusion current (due to concentration gradient) is exactly balanced by the drift current (due to the built-in electric field).

Forward Bias: Lowering the Barrier

Apply a positive voltage $V$ to the P-side relative to the N-side. This external voltage opposes the built-in potential. The net barrier becomes:

V_{\text{net}} = V_0 - V

The depletion width shrinks. More importantly, the energy barrier for majority carriers (holes from P-side, electrons from N-side) is reduced. A larger number of carriers now have enough energy to cross the junction.

The current that flows is diffusion current — carriers injected across the junction become minority carriers on the other side, where they recombine. The relationship is exponential because the number of carriers with energy above the barrier follows a Boltzmann distribution.

I = I_0 \left( e^{qV / kT} - 1 \right)

Here $I_0$ is the reverse saturation current (very small), $q$ is the electron charge, $k$ is Boltzmann's constant, and $T$ is absolute temperature.

Why the exponential? The fraction of carriers with enough energy to surmount a barrier of height $q(V_0 - V)$ is proportional to $e^{-q(V_0 - V)/kT}$ . At equilibrium ( $V=0$ ), this gives a current that exactly cancels the drift current. When $V>0$ , the barrier drops, and the net current becomes proportional to $e^{qV/kT}$ .

Reverse Bias: Raising the Barrier

Apply a negative voltage to the P-side relative to the N-side. Now the external voltage adds to the built-in potential:

V_{\text{net}} = V_0 + V_R

The barrier becomes higher. The depletion region widens. Diffusion of majority carriers is almost completely suppressed. The only current that flows is a tiny reverse saturation current $I_0$ , carried by minority carriers (electrons from the P-side, holes from the N-side) that are swept across by the electric field.

This current is essentially constant with voltage because the number of minority carriers is fixed by thermal generation — it does not depend on the barrier height once the barrier is large enough to block majority carriers.

Watch out

The reverse current is not zero — it is very small (nanoamps to microamps for silicon) but present. It doubles roughly every 10°C rise in temperature because thermal generation of minority carriers increases.

The Complete Picture: The Diode Equation

The single equation that captures both forward and reverse behaviour is:

I = I_0 \left( e^{qV / nkT} - 1 \right)

where $n$ is the ideality factor (typically 1 for ideal diodes, 1–2 for real diodes).

Forward bias ( $V > 0$ ): The exponential term dominates, current grows rapidly.
Reverse bias ( $V < 0$ ): The exponential term vanishes, $I \approx -I_0$ (a small constant).
At $V=0$ : $I = 0$ — the equation correctly gives zero net current.

Tip

For quick calculations at room temperature (300 K), remember $\frac{kT}{q} \approx 0.026$ V. So $e^{V/0.026}$ gives the factor by which current increases for every 26 mV of forward bias — a handy rule of thumb.

Why Not Ohm's Law?

A PN junction does not obey Ohm's law because the number of carriers available to conduct current is not constant — it depends exponentially on the applied voltage. The junction is a non-linear device: its resistance changes dramatically with bias direction and magnitude.

In forward bias, the resistance is low and decreases as voltage increases. In reverse bias, the resistance is extremely high (megohms) until breakdown occurs.

This asymmetry — the ability to conduct in one direction and block in the other — is the fundamental reason the PN junction is the building block of almost all semiconductor devices.

The graph plots the junction's potential barrier. Forward bias always lowers the barrier below $V_o$ , while reverse bias raises it above $V_o$ . The lowest curve (3) is therefore forward biased and the highest curve (1) is reverse biased.

Concept

The built-in barrier $V_o$ is the potential step a carrier must climb to cross an unbiased junction. An external battery adds to, or subtracts from, this built-in field:

Forward bias (p-side made positive) opposes the built-in field, so the net barrier decreases: $V_{\text{barrier}} = V_o - V$ .
Reverse bias (p-side made negative) aids the built-in field, so the net barrier increases: $V_{\text{barrier}} = V_o + V$ .

Reading the curves

The three curves saturate at different barrier heights, with $V_o$ marked at the intermediate (curve-2) level:

Curve 3 saturates below $V_o$ $\Rightarrow$ the barrier has been reduced $\Rightarrow$ forward bias.
Curve 1 saturates above $V_o$ $\Rightarrow$ the barrier has been raised $\Rightarrow$ reverse bias.

Why the other options fail

(A) and (D) make both curves the same bias, impossible since one lies above $V_o$ and the other below.
(C) reverses the roles; it would require forward bias to raise the barrier, contradicting $V_{\text{barrier}} = V_o - V$ .

✓Final answer

(B) curve 3 (lowest barrier) is forward biased and curve 1 (highest barrier) is reverse biased.

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

JKBOSE Class 12 Annual Regular Examination 2021Set SZ1 mark
$Q. What is Reverse Biasing?$
›Reveal solutionSolution

In reverse bias, the external battery is connected so it pulls majority carriers away from the junction, widening the depletion region and stopping current flow (barring a tiny leakage current).

A p-n junction diode is reverse biased when the positive terminal of the external battery is connected to the n-side and the negative terminal to the p-side.

Under this connection, the applied field is in the same direction as the internal field of the depletion region. Electrons in the n-region are attracted toward the positive terminal (away from the junction) and holes in the p-region are attracted toward the negative terminal (away from the junction). This widens the depletion region and increases the potential barrier.

As a result, majority-carrier current is blocked. Only a very small reverse saturation current (of the order of microamperes, due to minority carriers) flows, which is nearly independent of the reverse voltage until breakdown occurs at a high enough reverse voltage.

✓Final answer
$Reverse biasing = connecting the diode with the p-side to the negative terminal and the n-side to the positive terminal, which widens the depletion region and allows (ideally) no current except a small reverse saturation current.$
JKBOSE Class 12 Annual Regular Examination 2020Set SZ1 mark
$Q. The resistance and depletion layer in p-n junction diode decreases during forward bias. (True/False)$
›Reveal solutionSolution

True — forward bias narrows the depletion layer and lowers the junction resistance.

In an unbiased p-n junction, diffusion of majority carriers across the junction leaves behind a region depleted of free charge carriers (the depletion layer), with immobile ions creating a barrier potential that opposes further diffusion; this depletion layer offers high resistance to current flow.

When the junction is forward biased (p-side connected to the positive terminal, n-side to the negative terminal of the battery), the applied electric field is directed opposite to the internal field of the depletion layer. This pushes majority carriers (holes from the p-side and electrons from the n-side) towards the junction, opposing and reducing the barrier potential. As a result, the width of the depletion layer decreases, and since the depletion layer is what causes the junction's resistance, the junction resistance also decreases — allowing majority-carrier current to flow easily across the junction.

So the statement is correct: both the depletion layer width and the junction resistance decrease during forward bias.

✓Final answer
$True — forward bias reduces the barrier potential, narrowing the depletion layer and decreasing the junction's resistance.$

←Previous questionQ1 — The conductivity of a semiconductor increases with increase in tempera…→Next questionQ3 — Point A is held at -10V and point B is earthed (at 0V). Starting from …

Concept

Reading the curves

Why the other options fail

🎓Unlock everything free for 14 days

Unlock everything free for 14 days