Q.Calculate the pH of the following solutions: a) 2 g of TlOH dissolved in water to give 2 litre of solution. b) 0.3 g of Ca(OH)2 dissolved in water to give 500 mL of solution. c) 0.3 g of NaOH dissolved in water to give 200 mL of solution. d) 1mL of 13.6 M HCl is diluted with water to give 1 litre of solution.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Hydrogen Ion Concentration pH
Hydrogen Ion Concentration and pH
Imagine you have a glass of pure water. It looks simple, but inside, a tiny fraction of water molecules are constantly splitting apart and re-forming. This splitting creates two kinds of charged particles: a hydrogen ion (H+) and a hydroxide ion (OH−). In pure water, these two are perfectly balanced — there are exactly as many H+ as OH−.
Now, if you add something like lemon juice (an acid), you increase the number of hydrogen ions. The balance tips: more H+ than OH−. If you add baking soda (a base), you decrease H+ or increase OH−, and the balance tips the other way.
The question is: how do we measure this imbalance in a simple, practical way? The numbers of H+ ions are incredibly tiny — in pure water, only about 1 in every 10 million water molecules is split at any moment. Writing these numbers directly (like 0.0000001 moles per litre) is clumsy. That's where pH comes in.
The Precise Definition
pH is a mathematical shortcut. It stands for "power of hydrogen" (from the French puissance d'hydrogène).
pH=−log10[H+]
where [H+] is the concentration of hydrogen ions in moles per litre (mol/L).
The logarithm base 10 does two things at once:
- It compresses a huge range of numbers (from 10−14 to 100) into a manageable scale of 0 to 14.
- The negative sign flips the direction: higher [H+] gives a lower pH, and lower [H+] gives a higher pH.
What the Numbers Mean
| [H+] (mol/L) | pH | Example |
|---|---|---|
| 10−1 | 1 | Stomach acid |
| 10−3 | 3 | Lemon juice |
| 10−7 | 7 | Pure water (neutral) |
| 10−9 | 9 | Baking soda solution |
| 10−13 | 13 | Household bleach |
Notice the pattern: each step of 1 in pH means a tenfold change in [H+]. A solution of pH 3 has 10 times more H+ than pH 4, and 100 times more than pH 5.
The Key Insight
pH is not a measure of "how acidic" something is in a vague sense — it is a precise, logarithmic measure of the actual number of hydrogen ions present. The scale runs from 0 (most acidic, highest [H+]) to 14 (most basic, lowest [H+]), with 7 being neutral. …
Concept: pH is the negative logarithm of hydrogen ion concentration (pH=−log[H+]). For strong bases, [OH−] is found from molarity and stoichiometry, then [H+]=Kw/[OH−].
Step 1 – Molarity of each base
- (a) TlOH: Molar mass = 204.4 g/mol. Moles = 2/204.4=0.00978 mol in 2 L → [TlOH]=0.00489 M. Since TlOH is a strong base, [OH−]=0.00489 M.
- (b) Ca(OH)2: Molar mass = 74.1 g/mol. Moles = 0.3/74.1=0.00405 mol in 0.5 L → [Ca(OH)2]=0.00810 M. Each gives 2 OH−, so [OH−]=0.0162 M.
- (c) NaOH: Molar mass = 40 g/mol. Moles = 0.3/40=0.0075 mol in 0.2 L → [NaOH]=0.0375 M → [OH−]=0.0375 M.
- (d) HCl: Moles = 13.6×0.001=0.0136 mol in 1 L → [H+]=0.0136 M.
Step 2 – Calculate pH …
For strong bases find [OH−], then pH=14−pOH; for the strong acid find [H+] directly. Results: (a) 11.65, (b) 12.21, (c) 12.57, (d) 1.87.
a) 2 g TlOH in 2 L
M(TlOH)=204.4+17.0=221.4 g mol−1
[TlOH]=22/221.4=4.52×10−3 M=[OH−]
pOH=−log(4.52×10−3)=2.35 ⇒ pH=14−2.35=11.65
b) 0.3 g Ca(OH)₂ in 500 mL
M(Ca(OH)2)=40.1+2(17.0)=74.1 g mol−1
[Ca(OH)2]=0.50.3/74.1=8.10×10−3 M
Each formula unit gives 2 OH−: [OH−]=2(8.10×10−3)=1.62×10−2 M
pOH=−log(1.62×10−2)=1.79 ⇒ pH=12.21
c) 0.3 g NaOH in 200 mL
M(NaOH)=40.0 g mol−1 …
- COMEDK 2024Set 2024-A1 markMCQQ.
[!FORMULA] 1 cm3 of 0.01 M HCl is added to 1 L of NaCl solution. The pH of the resulting solution is:
(A) 5 (B) 3 (C) 1 (D) 2›Reveal solutionSolution
Adding a tiny volume of strong acid to a large volume of neutral salt solution barely changes the pH; the final pH is essentially that of the diluted acid, which here is about 5.
The key concept is dilution. When you add a small amount of strong acid (HCl) to a large volume of neutral solution (NaCl in water, pH = 7), the acid’s concentration drops dramatically. The pH is determined by the concentration of H⁺ ions, not by the total amount of acid. Many students mistakenly think “0.01 M HCl has pH = 2” and pick that, forgetting the huge dilution from 1 cm³ into 1 L.
Let’s work through it step by step.
-
Find the moles of H⁺ added.
The HCl solution is 0.01 M, and we add 1 cm³ = 0.001 L.
Moles of H⁺ = 0.01×0.001=1×10−5 mol.
-
Find the total volume of the resulting solution.
The original NaCl solution is 1 L, and we add 0.001 L of HCl.
Total volume ≈ 1.001 L. For pH calculations, this is essentially 1 L.
-
Calculate the new H⁺ concentration.
[H+]=1.001 L1×10−5 mol≈1×10−5 M.
- Convert to pH.
-
- COMEDK 2024Set 2024-M1 markMCQQ.300ml of an aqueous solution of NaOH with pH value of 10 is mixed with 200ml of an aqueous solution of HCl with a pH value of 4. What will be the pH of the resultant solution at room temperature? (A) 11.262 (B) 10.52 (C) 9.301 (D) 8.909
›Reveal solutionSolution
This is a neutralisation problem: we mix a strong base (NaOH, pH 10) with a strong acid (HCl, pH 4). After accounting for the limiting reagent, the excess OH⁻ concentration gives the final pOH, and thus pH ≈ 9.301. The correct option is (C).
Concept & Intuition
pH is a logarithmic measure of H⁺ concentration. For strong acids and bases, we can directly convert pH to molarity. When mixing, the H⁺ from the acid and OH⁻ from the base react completely (1:1). The leftover reagent determines the final pH. The key is to compute the number of moles of each, not just concentrations, because volumes change.
Step-by-step solution
-
Find [H⁺] and [OH⁻] from given pH values
- For the NaOH solution: pH = 10 → pOH = 14 – 10 = 4 → [OH⁻] = 10−4 M.
- For the HCl solution: pH = 4 → [H⁺] = 10−4 M. Both solutions have the same concentration of reactive ions, but different volumes.
-
Calculate moles of each
- Moles of OH⁻ from NaOH: 300 ml=0.300 L → 0.300×10−4=3.0×10−5 mol.
- Moles of H⁺ from HCl: 200 ml=0.200 L → 0.200×10−4=2.0×10−5 mol.
-
Neutralisation reaction
H++OH−→H2O
The H⁺ and OH⁻ react in a 1:1 ratio. Since we have 3.0×10−5 mol OH⁻ and 2.0×10−5 mol H⁺, H⁺ is the limiting reagent.
- Moles of OH⁻ remaining = 3.0×10−5−2.0×10−5=1.0×10−5 mol.
- Find total volume and new [OH⁻] Total volume = 300+200=500 ml=0.500 L.
-
- KCET 2023Set D-21 markMCQQ.The resistance of 0.1M weak acid HA in a conductivity cell is 2×103 Ohm. The cell constant of the cell is 0.78cm−1 and λm0 of acid HA is 390S cm2mol−1. The pH of the solution is (A) 3.3 (B) 4.2 (C) 5 (D) 3
›Reveal solutionSolution
Conductance → conductivity → molar conductivity → degree of dissociation α (Arrhenius/Kohlrausch) → [H+]=Cα → pH.
1. Conductivity from the cell data
The cell constant G∗ links measured resistance to conductivity:
κ=RG∗=2×103 Ω0.78 cm−1=3.9×10−4 Scm−1
2. Molar conductivity
Λm=C1000κ(C in mol L−1)
Λm=0.11000×3.9×10−4=0.10.39=3.9 Scm2mol−1
3. Degree of dissociation
For a weak electrolyte, the fraction dissociated is the ratio of its molar conductivity at that concentration to its limiting molar conductivity (Kohlrausch):
α=Λm0Λm=3903.9=0.01(=1%)
This is the key idea: Λm0 corresponds to complete dissociation, so the ratio measures how far the acid has actually dissociated. …
- COMEDK 2022Set 20221 markMCQQ.pH of 10−3 M solution of KOH is (A) 7.01 (B) 2 (C) 11 (D) 9
›Reveal solutionSolution
pOH = -log(10^-3) = 3 pH = 14 - pOH = 14 - 3 = 11
Concept: pH of a strong base. KOH is a strong base and dissociates completely, so [OH-] = 10^-3 M.
pOH = -log(10^-3) = 3 …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.