What is electrode potential?

NCERT Exemplar · Q25

Q. What is electrode potential?

Karnataka PUCShort· 2mImportance★★★★★

59% · 68/115 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Cell Representation Nernst Equation

Cell Representation and the Nernst Equation: From Intuition to Precision

Imagine you have a Daniell cell — a zinc rod in zinc sulphate solution connected by a salt bridge to a copper rod in copper sulphate solution. You know it produces a voltage. But what happens if you dilute the copper sulphate solution? Or if you change the temperature? The voltage changes. The Nernst equation is the tool that tells you exactly how much it changes.

The Intuition First

A battery works because the two half-cells "want" to react — zinc wants to lose electrons, copper ions want to gain them. This "want" is measured as a tendency, or potential. But the strength of that tendency depends on how crowded the ions are.

Think of it like this: If you have a room full of people who all want to leave (like zinc ions wanting to form), the push to get out is stronger when the room is packed. If the room is nearly empty, the push is weaker. Similarly, for copper ions wanting to enter the metal (gain electrons), the pull is stronger when there are many copper ions around, and weaker when there are few.

The Nernst equation quantifies this: the actual cell potential depends on the concentrations (or activities) of the ions involved.

The Precise Statement

For a general cell reaction:

aA + bB \rightarrow cC + dD

The cell potential $E$ under non-standard conditions is given by:

E = E^\circ - \frac{RT}{nF} \ln Q

Where:

$E$ = cell potential under the given conditions (in volts)
$E^\circ$ = standard cell potential (when all reactants/products are at 1 M, 1 atm, 25°C)
$R$ = universal gas constant (8.314 J/mol·K)
$T$ = temperature in Kelvin
$n$ = number of moles of electrons transferred in the balanced half-reactions
$F$ = Faraday constant (96,485 C/mol)
$Q$ = reaction quotient = $\frac{[C]^c [D]^d}{[A]^a [B]^b}$ (using concentrations for dilute solutions)

At 25°C (298 K), the equation simplifies to a very practical form:

E = E^\circ - \frac{0.0591}{n} \log_{10} Q

The 0.0591 comes from $\frac{2.303RT}{F}$ at 298 K. Notice it uses $\log_{10}$ (common log), not natural log.

Cell Representation: How We Write It

In electrochemistry, we represent a cell with a shorthand notation. For the Daniell cell:

\text{Zn(s)} \mid \text{Zn}^{2+}(\text{aq}) \parallel \text{Cu}^{2+}(\text{aq}) \mid \text{Cu(s)}

The single vertical line $\mid$ represents a phase boundary (solid electrode | solution). The double line $\parallel$ represents the salt bridge.

The anode (oxidation) is written on the left, the cathode (reduction) on the right. Electrons flow from left to right in the external circuit.

Applying the Nernst Equation to a Cell Representation

For the Daniell cell, the half-reactions are:

Anode (oxidation): $\text{Zn(s)} \rightarrow \text{Zn}^{2+}(\text{aq}) + 2e^-$
Cathode (reduction): $\text{Cu}^{2+}(\text{aq}) + 2e^- \rightarrow \text{Cu(s)}$

Overall: $\text{Zn(s)} + \text{Cu}^{2+}(\text{aq}) \rightarrow \text{Zn}^{2+}(\text{aq}) + \text{Cu(s)}$

Here $n = 2$ (two electrons transferred). The reaction quotient is:

Q = \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]}

So the Nernst equation becomes:

E = E^\circ - \frac{0.0591}{2} \log_{10} \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]}

Note

Solids (Zn, Cu) do not appear in $Q$ because their concentrations are constant (activity = 1).

A Worked Example

Suppose you have a Daniell cell where $[\text{Zn}^{2+}] = 0.1$ M and $[\text{Cu}^{2+}] = 1.0$ M at 25°C. $E^\circ$ for the cell is 1.10 V.

$E = 1.10 - \frac{0.0591}{2} \log_{10} \frac{0.1}{1.0}$ …

Why this formula?

Cell Representation & the Nernst Equation: Why It Works

The Core Question

Why does a cell's voltage change when concentrations change? The Nernst equation answers this — but the reason lies in the link between chemical free energy and electrical work.

1. The Fundamental Link: Gibbs Free Energy & Cell Potential

A galvanic cell does electrical work. The maximum useful work a cell can do equals the change in Gibbs free energy ( $\Delta G$ ):

\Delta G = -nFE_{\text{cell}}

Where:

$n$ = moles of electrons transferred
$F$ = Faraday constant ( $96,485 \, \text{C mol}^{-1}$ )
$E_{\text{cell}}$ = cell potential (volts)

Why negative? A spontaneous reaction has $\Delta G < 0$ and $E_{\text{cell}} > 0$ — the negative sign makes this consistent.

2. The Chemical Side: $\Delta G$ Depends on Concentration

For a general redox reaction:

aA + bB \rightarrow cC + dD

The Gibbs free energy under non-standard conditions is:

\Delta G = \Delta G^\circ + RT \ln Q

Where $Q$ is the reaction quotient:

Q = \frac{[C]^c [D]^d}{[A]^a [B]^b}

Why this form? It comes from the relationship between chemical potential and concentration — the entropy of mixing drives concentration dependence.

3. Combining Both Sides: The Derivation

Set the electrical work equal to the chemical free energy change:

-nFE_{\text{cell}} = -nFE^\circ_{\text{cell}} + RT \ln Q

Divide both sides by $-nF$ :

E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{RT}{nF} \ln Q

This is the Nernst equation.

4. The "Why" in Plain Terms

Concept	Physical Meaning
$E^\circ_{\text{cell}}$	Voltage when all species are at 1 M (standard state)
$-\frac{RT}{nF} \ln Q$	Correction factor — adjusts voltage for real concentrations
$Q$	Tells you how far the reaction is from equilibrium

Key insight: When $Q = K$ (equilibrium), $E_{\text{cell}} = 0$ — the battery is dead because no net reaction occurs.

5. The Common Form (log base 10)

At $25^\circ \text{C}$ ( $298 \, \text{K}$ ):

\frac{RT}{F} \ln 10 \approx 0.0592 \, \text{V}

So:

E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592}{n} \log_{10} Q

Why convert to log? Exam convenience — most concentration values are powers of 10.

--- …

Start your 14-day free trial to unlock the full solution →

Electrode potential is the voltage difference between a metal electrode and its surrounding electrolyte solution, measured relative to a standard reference electrode. It quantifies the tendency of an electrode to gain or lose electrons.

Electrode potential is one of those concepts that seems abstract at first, but it’s really just a measure of how badly a metal wants to be an ion (or vice versa). Think of it like a tug-of-war between the metal atoms and their ions in solution.

When you dip a metal rod into a solution of its own ions, two things can happen:

The metal atoms can lose electrons and go into solution as positive ions (oxidation).
The metal ions in solution can gain electrons and deposit onto the rod as metal atoms (reduction).

Which direction wins depends on the metal’s nature. Zinc, for example, readily gives up electrons — it has a strong tendency to oxidise. Copper, on the other hand, prefers to stay as metal or even pull ions out of solution.

The electrode potential is the voltage that builds up at the metal-solution interface because of this charge separation. It’s a direct measure of that tendency.

Important

You can never measure the absolute potential of a single electrode. You always measure the potential difference between two electrodes. That’s why we use a standard reference electrode (usually the Standard Hydrogen Electrode, SHE) as a zero point.

1. The standard hydrogen electrode (SHE) — our reference point

To give electrode potentials a numerical value, we define the SHE as exactly 0.00 V at all temperatures. It consists of:

A platinum electrode (inert, just conducts electrons)
Hydrogen gas at 1 bar pressure bubbled over it
An acidic solution with $H^+$ ions at 1 M concentration

The half-reaction is:

2H^+(aq) + 2e^- \rightleftharpoons H_2(g)

When we connect any other electrode to the SHE and measure the voltage, that reading is the standard electrode potential ( $E^\ominus$ ) of that electrode.

E^\ominus = \text{potential difference when the electrode is connected to SHE under standard conditions (1 M, 1 bar, 298 K)}

2. How the Nernst equation connects concentration to potential

The standard potential $E^\ominus$ only applies when all species are at 1 M concentration and 1 bar pressure. In real cells, concentrations vary — and so does the potential. The Nernst equation tells us exactly how.

For a general reduction half-reaction:

aA + bB + ne^- \rightarrow cC + dD

The Nernst equation is:

E = E^\ominus - \frac{RT}{nF} \ln Q

Where:

$E$ = electrode potential under non-standard conditions
$E^\ominus$ = standard electrode potential
$R$ = gas constant (8.314 J mol⁻¹ K⁻¹)
$T$ = temperature in Kelvin
$n$ = number of electrons transferred
$F$ = Faraday constant (96485 C mol⁻¹)
$Q$ = reaction quotient (products over reactants, raised to stoichiometric coefficients)

At 298 K, using log₁₀, this simplifies to:

E = E^\ominus - \frac{0.0591}{n} \log_{10} Q

Tip

The 0.0591 comes from $(2.303RT)/F$ at 298 K. It’s a constant you’ll use so often in electrochemistry that it becomes second nature. For quick calculations, remember: 0.059 V per decade of concentration change per electron transferred.

3. What the sign of electrode potential tells you

The sign convention is crucial for exams:

Positive $E^\ominus$ → The reduction half-reaction is spontaneous compared to SHE. The electrode tends to gain electrons (act as a cathode in a galvanic cell).
Negative $E^\ominus$ → The oxidation half-reaction is spontaneous compared to SHE. The electrode tends to lose electrons (act as an anode).

For example:

$Cu^{2+}/Cu$ : $E^\ominus = +0.34$ V → Copper ions readily reduce to copper metal.
$Zn^{2+}/Zn$ : $E^\ominus = -0.76$ V → Zinc metal readily oxidises to zinc ions. …

Start your 14-day free trial to unlock the full solution →

Common Mistakes on "Electrode Potential" (and How to Avoid Them)

Electrode potential is a fundamental concept in electrochemistry. Here are the most frequent errors students make, along with clear strategies to avoid them.

Mistake 1: Confusing Electrode Potential with Cell Potential

The error: Students often use "electrode potential" and "cell potential" interchangeably. They think the potential of a single electrode is the same as the voltage of a full electrochemical cell.

Why it happens: Both involve voltage differences, but the context is different.

How to avoid:

Remember: Electrode potential is the potential difference between a metal electrode and the solution it is immersed in (measured relative to a standard reference, usually the Standard Hydrogen Electrode).
Cell potential ( $E_{\text{cell}}$ ) is the difference between two electrode potentials:

E_{\text{cell}} = E_{\text{cathode}} - E_{\text{anode}}

Mnemonic: "Single electrode → single potential; two electrodes → cell potential."

Mistake 2: Forgetting the Standard Conditions

The error: Students quote electrode potential values without specifying that they are standard electrode potentials ( $E^\ominus$ ), measured under standard conditions.

Why it happens: Many textbooks list $E^\ominus$ values as if they are absolute, leading to casual usage.

How to avoid:

Always state: Standard electrode potential is measured at:
- 1 M concentration for all ions
- 1 atm pressure for gases
- 298 K (25°C)
Write correctly: $E^\ominus_{\text{Zn}^{2+}/\text{Zn}} = -0.76\ \text{V}$ (not just $-0.76\ \text{V}$ )
Exam tip: If conditions change, the potential changes (use the Nernst equation).

Mistake 3: Misinterpreting the Sign Convention

The error: Students think a negative electrode potential means the electrode is "bad" or "weak." They confuse the sign with reactivity.

Why it happens: Everyday language associates "negative" with "less" or "worse."

How to avoid:

Understand the meaning: A negative $E^\ominus$ $E^{⊖}$ means the electrode has a greater tendency to lose electrons (i.e., it is a stronger reducing agent).
- Example: $E^\ominus_{\text{Zn}^{2+}/\text{Zn}} = -0.76\ \text{V}$ → Zn readily oxidises (loses electrons).
Positive $E^\ominus$ means the electrode has a greater tendency to gain electrons (stronger oxidising agent).
- Example: $E^\ominus_{\text{Cu}^{2+}/\text{Cu}} = +0.34\ \text{V}$ → Cu²⁺ readily reduces.
Rule: More negative → stronger reducing agent; more positive → stronger oxidising agent.

Mistake 4: Confusing Anode and Cathode Based on Sign

The error: Students assume the negative electrode is always the anode and the positive electrode is always the cathode — but this is only true for galvanic (voltaic) cells.

Why it happens: The sign convention is taught early, but it flips in electrolytic cells.

How to avoid:

Remember the definitions:
- Anode: Where oxidation occurs (loss of electrons).
- Cathode: Where reduction occurs (gain of electrons).
Sign depends on cell type:
- Galvanic cell: Anode is negative, cathode is positive.
- Electrolytic cell: Anode is positive, cathode is negative.
Mnemonic: "In a galvanic cell, the anode is negative (AN = AN: Anode Negative). In electrolytic, it flips."

Mistake 5: Using the Wrong Formula for Cell Potential

The error: Students write $E_{\text{cell}} = E_{\text{cathode}} + E_{\text{anode}}$ or reverse the subtraction.

Why it happens: Some textbooks present it differently, or students memorise without understanding.

How to avoid:

Always use:

E_{\text{cell}} = E_{\text{cathode}} - E_{\text{anode}}

Check with an example: For the Daniell cell:
- $E^\ominus_{\text{Cu}^{2+}/\text{Cu}} = +0.34\ \text{V}$ (cathode)
- $E^\ominus_{\text{Zn}^{2+}/\text{Zn}} = -0.76\ \text{V}$ (anode)
- $E^\ominus_{\text{cell}} = 0.34 - (-0.76) = +1.10\ \text{V}$ (positive, spontaneous)
If you get a negative value, you likely reversed the subtraction — swap the electrodes.

Mistake 6: Ignoring the Nernst Equation for Non-Standard Conditions

The error: Students use standard electrode potentials even when concentrations or pressures are not standard.

Why it happens: They memorise $E^\ominus$ values but forget that real conditions differ.

How to avoid:

Use the Nernst equation when conditions are non-standard: …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

COMEDK 2026Set 2026-A1 markMCQ
$E^{o}_{\text{cell}}>0;\ \Delta G^{o}<0;\ Q_C<K_C$
›Reveal solutionSolution
For a spontaneous reaction in a galvanic cell, the standard cell potential must be positive ( $E^\circ_{\text{cell}} > 0$ ), and the standard Gibbs free energy change must be negative ( $\Delta G^\circ < 0$ ). The correct option is (A).

The key to this question is understanding the thermodynamic relationship between cell potential and Gibbs free energy. A spontaneous process in a galvanic cell means the cell can do electrical work on its surroundings without external input. The sign conventions are the critical link.

Recall the fundamental equation connecting Gibbs free energy and cell potential:

$\Delta G = -nFE_{\text{cell}}$
where $n$ is the number of moles of electrons transferred, $F$ is Faraday’s constant, and $E_{\text{cell}}$ is the cell potential under the given conditions.

For a spontaneous reaction, $\Delta G < 0$ . Since $n$ and $F$ are positive, the negative sign forces $E_{\text{cell}} > 0$ for spontaneity.

Now consider standard conditions (1 M concentrations, 1 atm pressure, 298 K). The equation becomes:

$\Delta G^\circ = -nFE^\circ_{\text{cell}}$
Spontaneity under standard conditions requires $\Delta G^\circ < 0$ , which again implies $E^\circ_{\text{cell}} > 0$ .

So the pair $(E^\circ_{\text{cell}} > 0, \Delta G^\circ < 0)$ is always true for a spontaneous cell reaction under standard conditions.

Examine each option:

(A) $E^\circ_{\text{cell}} > 0$ ; $\Delta G^\circ < 0$ — matches the reasoning above.

(B) $E^\circ_{\text{cell}} = 0$ ; $\Delta G^\circ = 0$ — this describes equilibrium, not spontaneity.

(C) $E^\circ_{\text{cell}} < 0$ ; $\Delta G^\circ > 0$ — this is non-spontaneous (electrolytic cell under standard conditions). …
Start your 14-day free trial to see the full solution →
KCET 2025Set D-41 markMCQ
$Al^{3+} + 3e^- \rightarrow Al$
›Reveal solutionSolution

Write the Nernst equation for the reduction half-reaction; $[\mathrm{Al^{3+}}]$ sits in the numerator of the log term, so increasing it raises the electrode potential.

Step 1 — The half-cell and the Nernst equation.

The reduction half-reaction is
$\mathrm{Al^{3+}}(aq) + 3e^- \rightarrow \mathrm{Al}(s), \qquad n = 3$
The Nernst equation for a reduction electrode at $298\,\mathrm{K}$ is
$E = E^\circ - \frac{0.059}{n}\log \frac{[\text{reduced form}]}{[\text{oxidised form}]}$
Step 2 — Substitute the species.

Aluminium metal is a pure solid, so its activity is $1$ and it does not appear in the quotient. The oxidised form is $\mathrm{Al^{3+}}$ :
$E = E^\circ - \frac{0.059}{3}\log \frac{1}{[\mathrm{Al^{3+}}]}$
Using $\log(1/x) = -\log x$ , this simplifies to
$\boxed{E = E^\circ + \frac{0.059}{3}\log [\mathrm{Al^{3+}}]}$
Step 3 — Read off the dependence.

$\log[\mathrm{Al^{3+}}]$ is a monotonically increasing function of $[\mathrm{Al^{3+}}]$ , and it carries a positive coefficient $\tfrac{0.059}{3}$ . Therefore as $[\mathrm{Al^{3+}}]$ increases, $E$ increases.

Step 4 — The physical reason (why this must be so). …
Start your 14-day free trial to see the full solution →
COMEDK 2025Set 2025-E1 markMCQ
$4 \mathrm{Br}^{-}+\mathrm{O}_2+4 \mathrm{H}^{+} \rightarrow 2 \mathrm{Br}_2+2 \mathrm{H}_2 \mathrm{O}$
›Reveal solutionSolution
The equilibrium constant for the reverse reaction is the reciprocal of the equilibrium constant for the forward reaction. Using the Nernst equation at equilibrium, we find $K_c$ for the forward reaction is about $7.03 \times 10^{10}$ , so for the reverse reaction it is $1.422 \times 10^{-11}$ , which corresponds to option (C).

The key concept here is the relationship between the standard cell potential ( $E^\circ_{\text{cell}}$ ) and the equilibrium constant ( $K_c$ ) via the Nernst equation. At equilibrium, the cell potential is zero, and the reaction quotient $Q$ equals $K_c$ . The equation is:
$E^\circ_{\text{cell}} = \frac{RT}{nF} \ln K_c$
where $n$ is the number of electrons transferred, $F$ is Faraday’s constant, $R$ is the gas constant, and $T$ is temperature in Kelvin.

A common pitfall: students often forget that the equilibrium constant for the reverse reaction is simply the reciprocal of that for the forward reaction. Also, careful attention to the sign of $E^\circ$ and the value of $n$ is essential.

Let’s work through it step by step.

Identify $n$ , the number of electrons transferred.

In the forward reaction:

$4 \mathrm{Br}^{-} \rightarrow 2 \mathrm{Br}_2 + 4e^-$ (oxidation)

$\mathrm{O}_2 + 4 \mathrm{H}^{+} + 4e^- \rightarrow 2 \mathrm{H}_2\mathrm{O}$ (reduction)

So $n = 4$ .

Write the Nernst equation at equilibrium for the forward reaction.

At 298 K, using base-10 logarithms:

$E^\circ_{\text{cell}} = \frac{0.0591}{n} \log K_c$
(This comes from $\frac{2.303 RT}{F} \approx 0.0591$ at 298 K.)

Plug in the given $E^\circ_{\text{cell}} = 0.16$ V and $n=4$ .

$0.16 = \frac{0.0591}{4} \log K_c$ $0.16 = 0.014775 \log K_c$ $\log K_c = \frac{0.16}{0.014775} \approx 10.828$

Solve for $K_c$ of the forward reaction.

$K_c = 10^{10.828} \approx 6.74 \times 10^{10}$
(A more precise calculation using $0.05916$ gives $K_c \approx 7.03 \times 10^{10}$ , matching option D’s value for the forward reaction.)

Now consider the reverse reaction. The reverse reaction is: …
Start your 14-day free trial to see the full solution →
COMEDK 2025Set 2025-M1 markMCQ
$\mathrm{Al} / \mathrm{Al}^{3+}(0.01 \mathrm{M}) \| \mathrm{Fe}^{2+}(0.02 \mathrm{M}) / \mathrm{Fe}$
›Reveal solutionSolution
The cell EMF is given by the Nernst equation; increasing the concentration of the reactant (Fe²⁺) or decreasing the concentration of the product (Al³⁺) increases the cell voltage. The correct choice is (C).

The key idea is the Nernst equation, which tells us how the cell potential depends on the concentrations of the ions involved. For a spontaneous cell, the EMF is largest when the reaction quotient $Q$ is smallest — that is, when the reactants are concentrated and the products are dilute. Here, Al³⁺ is a product and Fe²⁺ is a reactant, so we want to increase Fe²⁺ or decrease Al³⁺ to raise the EMF.

Let’s work through it step by step.

Write the cell reaction. The cell notation is:

$\mathrm{Al} / \mathrm{Al}^{3+}(0.01\,\mathrm{M}) \parallel \mathrm{Fe}^{2+}(0.02\,\mathrm{M}) / \mathrm{Fe}$
The left half-cell is the anode (oxidation):
$\mathrm{Al} \rightarrow \mathrm{Al}^{3+} + 3e^-$
The right half-cell is the cathode (reduction):
$\mathrm{Fe}^{2+} + 2e^- \rightarrow \mathrm{Fe}$
To balance electrons, multiply the Al half-reaction by 2 and the Fe half-reaction by 3:
$2\mathrm{Al} + 3\mathrm{Fe}^{2+} \rightarrow 2\mathrm{Al}^{3+} + 3\mathrm{Fe}$
So the overall reaction has Al³⁺ as a product and Fe²⁺ as a reactant.

Apply the Nernst equation. For the reaction $aA + bB \rightarrow cC + dD$ , the Nernst equation at 298 K is:

$E = E^\circ - \frac{0.0591}{n} \log Q$
where $Q = \frac{[\text{products}]^c [\text{products}]^d}{[\text{reactants}]^a [\text{reactants}]^b}$ .

Here, $n = 6$ (the total electrons transferred), and:
$Q = \frac{[\mathrm{Al}^{3+}]^2}{[\mathrm{Fe}^{2+}]^3}$
(Solids Al and Fe have activity = 1, so they don’t appear.)

See how E changes with concentration. The EMF is:

$E = E^\circ - \frac{0.0591}{6} \log\left( \frac{[\mathrm{Al}^{3+}]^2}{[\mathrm{Fe}^{2+}]^3} \right)$
To increase $E$ , we want the term $-\frac{0.0591}{6} \log Q$ to become less negative (or more positive). That means we want $\log Q$ to decrease — i.e., make $Q$ smaller.

$Q$ gets smaller if $[\mathrm{Al}^{3+}]$ decreases (product concentration down). …
Start your 14-day free trial to see the full solution →
COMEDK 2024Set 2024-M1 markMCQ
$\begin{aligned} & \mathrm{Cd}(\mathrm{S})+2 \mathrm{H}^{+} \rightarrow \mathrm{Cd}^{2+}+\mathrm{H}_{2(\mathrm{~g})} \\ & {\left[\mathrm{H}^{+}\right]=0.02 \mathrm{M} \quad \mathrm{E}^0\left(\mathrm{Cd}^{2+} / \mathrm{Cd}\right)=-0.4 \mathrm{~V},\left[\mathrm{Cd}^{2+}\right]=0.01 \mathrm{M} \text { and partial pressure of } \mathrm{H}_2 \text { gas }=0.8 \mathrm{~atm} .} \end{aligned}$
›Reveal solutionSolution
The cell EMF is found using the Nernst equation for the reaction quotient, yielding a value of approximately 0.3616 V, which corresponds to option (C).

The key concept here is the Nernst equation, which adjusts the standard cell potential ( $E^\circ$ ) for non-standard conditions (concentrations and gas pressures). The reaction involves a solid cadmium electrode, hydrogen ions, and hydrogen gas, so we treat the cell as a concentration cell with a redox couple. The intuition: even though $E^\circ$ for the Cd²⁺/Cd half-cell is given, the overall cell reaction combines it with the standard hydrogen electrode (SHE) under non-standard conditions. The Nernst equation lets us compute the actual voltage.

Identify the half-reactions and standard cell potential.

The overall reaction is:

$\mathrm{Cd(s)} + 2\mathrm{H}^+ \rightarrow \mathrm{Cd}^{2+} + \mathrm{H}_2(g)$ .

The half-reactions are:

Oxidation: $\mathrm{Cd(s)} \rightarrow \mathrm{Cd}^{2+} + 2e^-$ with $E^\circ_{\text{ox}} = +0.4\ \mathrm{V}$ (since $E^\circ(\mathrm{Cd}^{2+}/\mathrm{Cd}) = -0.4\ \mathrm{V}$ for reduction, oxidation reverses the sign).

Reduction: $2\mathrm{H}^+ + 2e^- \rightarrow \mathrm{H}_2(g)$ with $E^\circ_{\text{red}} = 0\ \mathrm{V}$ (standard hydrogen electrode). The standard cell potential is $E^\circ_{\text{cell}} = E^\circ_{\text{red}} + E^\circ_{\text{ox}} = 0 + 0.4 = 0.4\ \mathrm{V}$ .

Write the Nernst equation for the cell.

For the reaction $aA + bB \rightarrow cC + dD$ , the Nernst equation at 298 K is:

$E = E^\circ - \frac{0.0591}{n} \log Q$
where $n$ is the number of electrons transferred (here $n=2$ ), and $Q$ is the reaction quotient.

For our reaction:
$Q = \frac{[\mathrm{Cd}^{2+}] \cdot P_{\mathrm{H}_2}}{[\mathrm{H}^+]^2}$
Note: Solids (Cd) and liquids (if any) have activity = 1, so they don't appear.

Plug in the given values. $[\mathrm{Cd}^{2+}] = 0.01\ \mathrm{M}$ , $P_{\mathrm{H}_2} = 0.8\ \mathrm{atm}$ , $[\mathrm{H}^+] = 0.02\ \mathrm{M}$ . So:

$Q = \frac{(0.01)(0.8)}{(0.02)^2} = \frac{0.008}{0.0004} = 20$

Compute the logarithm. …
Start your 14-day free trial to see the full solution →

KCET 2023Set D-21 markMCQ

^+

›Reveal solution

For a metal/metal-ion electrode the Nernst equation makes the reduction potential increase monotonically with the ion concentration — so just rank the four $[\mathrm{Ag^+}]$ values.

1. The Nernst equation for this electrode

The half-reaction is a one-electron reduction:

\mathrm{Ag^{+}} + e^{-} \longrightarrow \mathrm{Ag_{(s)}}, \qquad n = 1

E = E^{\circ} - \frac{0.059}{n}\log\frac{1}{[\mathrm{Ag^{+}}]} = E^{\circ} + 0.059\,\log[\mathrm{Ag^{+}}]

(The solid Ag has unit activity, so it does not appear in the quotient.)

2. The qualitative rule that follows

Because $\log[\mathrm{Ag^{+}}]$ is an increasing function of $[\mathrm{Ag^{+}}]$ :

The higher the concentration of the oxidised species ( $\mathrm{Ag^{+}}$ ), the higher (more positive) the reduction potential.

This makes chemical sense — more $\mathrm{Ag^{+}}$ in solution drives the reduction to Ag forward (Le Chatelier).

3. Compute each electrode ( $E^{\circ} = +0.80\ \mathrm{V}$ )

Electrode	$[\mathrm{Ag^+}]$	$\log[\mathrm{Ag^+}]$	$E = 0.80 + 0.059\log[\mathrm{Ag^+}]$
B	0.1 M	$-1$	$0.80 - 0.059 = 0.741\ \mathrm{V}$
C	0.01 M	$-2$	$0.80 - 0.118 = 0.682\ \mathrm{V}$
D	0.001 M	$-3$	$0.80 - 0.177 = 0.623\ \mathrm{V}$

Start your 14-day free trial to see the full solution →

COMEDK 2022Set 20221 markMCQ
$^\circ$
›Reveal solutionSolution

Nernst: E = E(std) - (0.0591/n) log Q = 0.44 - (0.0591/2) log 10 = 0.44 - 0.0296 = 0.4104 V ~ 0.41 V

Concept: Nernst equation for a galvanic cell.

Cell: Fe | Fe^2+ (0.001 M) || H^+ (0.01 M) | H2 (1 bar) | Pt

Anode (oxidation): Fe -> Fe^2+ + 2e^-

Cathode (reduction): 2 H^+ + 2e^- -> H2

Overall: Fe + 2 H^+ -> Fe^2+ + H2 , n = 2

E(cell,std) = E(cathode) - E(anode) = 0.00 - (-0.44) = +0.44 V

Reaction quotient: …
Start your 14-day free trial to see the full solution →
KCET 2020Set A-11 markMCQ
$E^{\circ}_{Fe^{+3}/Fe^{+2}} = + 0.76V$
›Reveal solutionSolution
Identify cathode/anode from the $E^\circ$ values, get $E^\circ_{cell}$ and $n$ , then use $\log K_c = \dfrac{n E^\circ_{cell}}{0.06}$ .

Step 1 — Decide which half-cell is the cathode.

Given:
$E^\circ_{Fe^{3+}/Fe^{2+}} = +0.76\ \text{V}, \qquad E^\circ_{I_2/I^-} = +0.55\ \text{V}$
In a galvanic cell the electrode with the higher (more positive) reduction potential acts as the cathode (reduction), and the other is the anode (oxidation) — this is what makes $E^\circ_{cell}$ positive and the reaction spontaneous.

Since $0.76 > 0.55$ :

Cathode (reduction): $Fe^{3+} + e^- \longrightarrow Fe^{2+}$

Anode (oxidation): $2I^- \longrightarrow I_2 + 2e^-$

Step 2 — Balance the electrons to get $n$ .

The iodide half-reaction releases 2 electrons, so the iron half-reaction must be doubled:
$2Fe^{3+} + 2e^- \longrightarrow 2Fe^{2+}$ $2I^- \longrightarrow I_2 + 2e^-$ $\rule{6cm}{0.4pt}$ $\textbf{Overall: } 2Fe^{3+} + 2I^- \longrightarrow 2Fe^{2+} + I_2 \qquad \boxed{n = 2}$
Step 3 — Compute $E^\circ_{cell}$ .
$E^\circ_{cell} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.76 - 0.55 = 0.21\ \text{V}$
(Note: $E^\circ$ is an intensive property — it is not multiplied when the half-reaction is doubled. Only $n$ changes.)

Step 4 — Link $E^\circ_{cell}$ to the equilibrium constant.

At equilibrium the cell is dead ( $E_{cell} = 0$ , $Q = K_c$ ), and the Nernst equation gives the standard relation …
Start your 14-day free trial to see the full solution →
KCET 2019Set A-11 markMCQ
$E^\circ_{Mn^{+7}|Mn^{+2}} = 1.5$
›Reveal solutionSolution

Convert each half-reaction to its Gibbs energy ( $\Delta G^\circ = -nFE^\circ$ ), add the energies (never the potentials), and convert back.

1. The key principle — why you cannot just subtract the potentials. $E^\circ$ is an intensive quantity (energy per electron), so potentials of different half-reactions do not add. The extensive quantity that does add is the Gibbs free energy:
$\Delta G^\circ = -nFE^\circ$
This is the single idea the whole question is testing.

2. Write the three half-reactions with their electron counts $n$ .
$\text{(i)}\;\; \ce{Mn^{7+} + 5e^- -> Mn^{2+}}, \quad n_1 = 5, \quad E_1^\circ = 1.5\ \mathrm{V}$ $\text{(ii)}\; \ce{Mn^{4+} + 2e^- -> Mn^{2+}}, \quad n_2 = 2, \quad E_2^\circ = 1.2\ \mathrm{V}$ $\text{(iii)} \ce{Mn^{7+} + 3e^- -> Mn^{4+}}, \quad n_3 = 3, \quad E_3^\circ = ?$
(Check the electron counts: $7 \to 2$ is a drop of 5; $4 \to 2$ a drop of 2; $7 \to 4$ a drop of 3.)

3. Set up the thermodynamic cycle. Reaction (i) is the sum of (iii) followed by (ii):
$\ce{Mn^{7+} ->[3e^-] Mn^{4+} ->[2e^-] Mn^{2+}} \quad \equiv \quad \ce{Mn^{7+} ->[5e^-] Mn^{2+}}$
Since $\Delta G^\circ$ is a state function, the energies add:
$\Delta G_1^\circ = \Delta G_3^\circ + \Delta G_2^\circ$
4. Substitute $\Delta G^\circ = -nFE^\circ$ . The $-F$ cancels throughout: …
Start your 14-day free trial to see the full solution →
KCET 2018Set A-11 markMCQ
$E^\circ_{\text{cell}} = 0.3~\text{V}$
›Reveal solutionSolution

Use $E^\circ_{\text{cell}}=\frac{0.059}{n}\log K_c$ at 298 K with $n=2$ ; $\log K_c = 2(0.3)/0.059 \approx 10$ .

Step 1 — Where the relation comes from.

The Nernst equation for a cell reaction is
$E_{\text{cell}}=E^{\circ}_{\text{cell}}-\frac{0.059}{n}\log Q$
At equilibrium the cell is dead: $E_{\text{cell}}=0$ and the reaction quotient $Q$ becomes the equilibrium constant $K_c$ . Therefore
$0=E^{\circ}_{\text{cell}}-\frac{0.059}{n}\log K_c\quad\Longrightarrow\quad \log K_c=\frac{n\,E^{\circ}_{\text{cell}}}{0.059}$
(Equivalently, from $\Delta G^\circ=-nFE^\circ=-RT\ln K$ .)

Step 2 — Substitute $n = 2$ , $E^\circ_{\text{cell}} = 0.3$ V, $T = 298$ K.
$\log K_c=\frac{2\times 0.3}{0.059}=\frac{0.6}{0.059}\approx 10.17\approx 10$
Step 3 — Antilog.
$K_c\approx 10^{10}$
Step 4 — Physical check. …
Start your 14-day free trial to see the full solution →

←Previous questionQ24 — Value of standard electrode potential for the oxidation of Cl^- ions i…→Next questionQ26 — A Daniell (galvanic) cell is used as a power source to run a separate …

Q.What is electrode potential?

Concept understanding — Cell Representation Nernst Equation

Cell Representation and the Nernst Equation: From Intuition to Precision

The Intuition First

The Precise Statement

Cell Representation: How We Write It

Applying the Nernst Equation to a Cell Representation

A Worked Example

Why this formula?

Cell Representation & the Nernst Equation: Why It Works

The Core Question

1. The Fundamental Link: Gibbs Free Energy & Cell Potential

2. The Chemical Side: $\Delta G$ Depends on Concentration

3. Combining Both Sides: The Derivation

4. The "Why" in Plain Terms

5. The Common Form (log base 10)

1. The standard hydrogen electrode (SHE) — our reference point

2. How the Nernst equation connects concentration to potential

3. What the sign of electrode potential tells you

Concept: Electrode Potential — Definition via the Standard Hydrogen Electrode (SHE)

Method: Defining and Interpreting Electrode Potential

Common Mistakes on "Electrode Potential" (and How to Avoid Them)

Mistake 1: Confusing Electrode Potential with Cell Potential

Mistake 2: Forgetting the Standard Conditions

Mistake 3: Misinterpreting the Sign Convention

Mistake 4: Confusing Anode and Cathode Based on Sign

Mistake 5: Using the Wrong Formula for Cell Potential

Mistake 6: Ignoring the Nernst Equation for Non-Standard Conditions

1. The Nernst equation for this electrode

2. The qualitative rule that follows

3. Compute each electrode ( $E^{\circ} = +0.80\ \mathrm{V}$ )

Q.What is electrode potential?

1. The standard hydrogen electrode (SHE) — our reference point

2. How the Nernst equation connects concentration to potential

3. What the sign of electrode potential tells you

🎓Unlock everything free for 14 days

Unlock everything free for 14 days