Q.Find dxdy in the following: logxcosx,x>0
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Derivative Evaluation
Derivative Evaluation
To evaluate a derivative means to find f′(a) — a single number that tells you how fast f is changing right at x=a. Think of a speedometer: it doesn't report how far you've travelled, only how fast your position is changing at this instant. That instantaneous rate of change is exactly what f′(a) measures.
The geometric picture
On the curve y=f(x), pick a point P and a nearby point Q. The straight line through them — the secant — has slope equal to the average rate of change between P and Q. Now slide Q toward P: the secant rotates into the tangent line that just touches the curve at P, and its slope is f′(a).
f′(a) is the slope of the tangent to y=f(x) at x=a — how steep the curve is right there.
The limit definition
f′(a)=limh→0hf(a+h)−f(a)
Here h is a tiny step from a to a+h, the numerator is the matching change in height, and the ratio is a secant slope. As h→0 the secant becomes the tangent. An equivalent form is
f′(a)=limx→ax−af(x)−f(a).
When this limit exists, f is differentiable at a (which forces continuity there).
Continuity alone is not enough. f(x)=∣x∣ is continuous at 0, but its left slope −1 and right slope +1 disagree, so f′(0) does not exist — a corner has no single tangent.
A worked evaluation
For f(x)=x2 at x=3:
f′(3)=limh→0h(3+h)2−9=limh→0(6+h)=6.
So the tangent at x=3 has slope 6.
From a number to a function …
The key idea is Implicit Differentiation — but here the function is given explicitly as y=logxcosx, so we simply differentiate using the quotient rule.
Let u=cosx and v=logx (natural log). Then:
dxdy=v2v⋅u′−u⋅v′
We have u′=−sinx and v′=x1. Substituting:
dxdy=(logx)2(logx)(−sinx)−(cosx)(x1) …
We use the quotient rule for differentiation because the function is a ratio of two differentiable functions. The derivative is dxdy=(logx)2−sinx⋅logx−xcosx.
The problem asks for dxdy of y=logxcosx, with x>0. The condition x>0 ensures the logarithm is defined and the denominator is non-zero (except at x=1, but we differentiate away from that point).
The core idea here is the quotient rule. Whenever you have a function that is one differentiable function divided by another, you don't need to rewrite it or use the product rule with a negative exponent (though that also works). The quotient rule is direct and clean.
The quotient rule: If y=vu, then dxdy=v2v⋅dxdu−u⋅dxdv.
Let’s apply it step by step.
-
Identify the numerator and denominator.
Here, u=cosx and v=logx. Both are differentiable for x>0.
-
Differentiate each part separately.
- dxdu=dxd(cosx)=−sinx
- dxdv=dxd(logx)=x1 (Remember: logx here means the natural logarithm, as is standard in calculus.)
-
Plug into the quotient rule formula.
dxdy=v2v⋅dxdu−u⋅dxdv=(logx)2(logx)(−sinx)−(cosx)(x1)
- Simplify the numerator. The numerator becomes −sinxlogx−xcosx. There’s no further algebraic simplification that makes it cleaner, so we leave it as is. …
Method: The Quotient Rule with a Logarithmic Denominator
Use this whenever y is a ratio where the denominator is a logarithm (or another standard function whose own derivative you must recall correctly).
Steps
Step 1: Identify the numerator and denominator functions
Write y=vu with u=cosx and v=logx, valid for x>0 (so the logarithm is defined) and excluding x=1 (where logx=0 would make the denominator zero).
Step 2: Recall the quotient rule formula
dxdy=v2vdxdu−udxdv
Step 3: Differentiate u and v separately, using the correct standard derivative for each
dxdu=−sinx,dxdv=x1 …
Common Mistakes
Mistake 1: Misremembering the derivative of logx
Why it's wrong: writing dxdlogx=logx1 instead of x1 is one of the most frequent errors with logarithmic denominators — it conflates the function's value with its derivative. Correct approach: fix dxdlogx=x1 firmly and double-check it every time a logarithm appears in a quotient.
Mistake 2: Swapping the order of the two terms in the quotient rule numerator
Why it's wrong: the formula is vu′−uv′, and reversing it to uv′−vu′ flips the overall sign. Correct approach: always write "denominator times derivative of numerator, minus numerator times derivative of denominator" before substituting. …
Showing the 12 most recent of 14 on this concept.
- KCET 2025Set A-11 markMCQQ.limx→1x−1x4−x is (A) 0 (B) 7 (C) Does not exist (D) 21
›Reveal solutionSolution
Substitute t=x to clear the radicals, factor out the common t, and use the standard limit limt→1t−1tn−1=n.
Step 1 — Recognise the indeterminate form
At x=1: numerator =14−1=0, denominator =1−1=0. So the limit is of the form 00 — it exists (option (C) is a trap) but must be resolved by cancelling the common factor.
Step 2 — Substitute to remove the radicals
Let
t=x⟹x=t2,x→1⇒t→1
Then x4=t8 and x=t, so
L=limx→1x−1x4−x=limt→1t−1t8−t
Everything is now a polynomial — much easier to factor.
Step 3 — Factor and split
t−1t8−t=t−1t(t7−1)=t⋅t−1t7−1
Step 4 — Apply the standard limit
The standard result (from the binomial/derivative definition) is
limt→at−atn−an=nan−1
With a=1, n=7: …
- KCET 2025Set A-11 markMCQQ.A function f(x)=⎩⎨⎧ex1+1ex1−1,0,if x=0if x=0 is (A) continuous at x=0 (B) not continuous at x=0 (C) differentiable at x=0 (D) differentiable at x=0, but not continuous at x=0
›Reveal solutionSolution
Evaluate the two one-sided limits: e1/x→∞ from the right and →0 from the left, giving limits +1 and −1 — they disagree, so f is discontinuous at 0.
1. The continuity test. f is continuous at x=0 iff
limx→0−f(x)=limx→0+f(x)=f(0)
Here f(0)=0 by definition. The whole question hinges on the behaviour of the exponent x1, which blows up in opposite directions on the two sides of 0.
2. Right-hand limit (x→0+). Then x1→+∞, so t=e1/x→+∞. Divide numerator and denominator by t (the standard trick when a term dominates):
limx→0+e1/x+1e1/x−1=limt→∞t+1t−1=limt→∞1+t11−t1=1+01−0=+1
3. Left-hand limit (x→0−). Now x1→−∞, so t=e1/x→0. Substitute directly:
limx→0−e1/x+1e1/x−1=0+10−1=−1
4. Compare.
limx→0−f(x)=−1=+1=limx→0+f(x) …
- KCET 2025Set A-11 markMCQQ.The derivative of sinx with respect to logx is (A) cosx (B) xcosx (C) logxcosx (D) xcosx
›Reveal solutionSolution
"Derivative of u with respect to v" means dvdu=dv/dxdu/dx — differentiate both with respect to x and divide.
Step 1 — Name the two functions.
u=sinx,v=logx(x>0).
We are asked for dvdu, not dxdu.
Step 2 — The chain rule in ratio form. Since both are functions of the common variable x,
dvdu=dxdu⋅dvdx=dv/dxdu/dx(valid where dxdv=0).
Step 3 — Differentiate each with respect to x.
dxdu=cosx,dxdv=x1.
Step 4 — Divide. …
- COMEDK 2025Set 2025-M1 markMCQQ.If y=ax+xa, then 2xydxdy is equal to (A) x+xa (B) axx2+a2 (C) ax−xa (D) xa−ax
›Reveal solutionSolution
The key is to simplify y before differentiating, using the identity (u+1/u)2=u+1/u+2. This avoids messy chain rules and leads directly to 2xydxdy=ax−xa, which matches option (C).
Concept & Intuition
When a function involves sums of square roots of reciprocals, squaring it often reveals a simpler algebraic relationship. Here, y=x/a+a/x looks symmetric. Instead of differentiating directly (which would involve messy chain rules and square roots), we can square both sides to get a polynomial-like relation. Then implicit differentiation becomes clean and straightforward.
Step-by-step solution
- Square both sides Let y=ax+xa. Square:
y2=ax+xa+2ax⋅xa=ax+xa+2.
The cross-term simplifies because ax⋅xa=1=1.
- Rewrite as an implicit relation So we have:
y2=ax+xa+2.
This is much simpler than the original form.
- Differentiate implicitly with respect to x Differentiate both sides:
2ydxdy=a1−x2a.
(Recall dxd(x−1)=−1/x2, so dxd(a/x)=−a/x2.)
- Multiply both sides by x We want 2xydxdy, so multiply the equation by x: …
- KCET 2023Set A-21 markMCQQ.The value of elog10tan1∘+log10tan2∘+log10tan3∘+…+log10tan89∘ is (A) 3 (B) e1 (C) 1 (D) 0
›Reveal solutionSolution
Convert the sum of logs into the log of a product, pair complementary angles so every pair multiplies to 1, and the exponent collapses to 0.
Step 1 — Sum of logs = log of product.
log10tan1∘+log10tan2∘+⋯+log10tan89∘=log10(tan1∘⋅tan2∘⋯tan89∘)
Step 2 — Pair complementary angles.
The key identity is tan(90∘−θ)=cotθ=tanθ1, so
tanθ⋅tan(90∘−θ)=1.
Pair the 88 terms other than 45∘: …
- KCET 2023Set A-21 markMCQQ.If y=asinx+bcosx, then y2+(dxdy)2 is a (A) function of y (B) function of x and y (C) constant (D) function of x
›Reveal solutionSolution
The expression y2+(dxdy)2 simplifies to a constant a2+b2, independent of x and y.
The key insight here is that when you have a linear combination of sinx and cosx, the derivative simply swaps and alternates signs between them. Squaring and adding the function and its derivative often produces a Pythagorean identity that cancels the x-dependence entirely.
Let’s work through it step by step.
-
Write down the given function and its derivative.
We have y=asinx+bcosx.
Differentiating term by term:
dxdy=acosx−bsinx.
-
Square both y and dxdy.
y2=(asinx+bcosx)2=a2sin2x+2absinxcosx+b2cos2x.
(dxdy)2=(acosx−bsinx)2=a2cos2x−2absinxcosx+b2sin2x.
-
Add the two squares.
y2+(dxdy)2=(a2sin2x+b2cos2x+a2cos2x+b2sin2x)+(2absinxcosx−2absinxcosx).
The cross terms cancel exactly. Group the sin2 and cos2 terms:
=a2(sin2x+cos2x)+b2(cos2x+sin2x). …
-
- COMEDK 2023Set 2023-E1 markMCQQ.If f(x)=(x2−x+1)6(x+1)71+x2 then the value of f′(0) is equal to (A) 15 (B) 2 (C) 13 (D) 11
›Reveal solutionSolution
Therefore f'(0) = f(0) * 13 = 13.
Concept: logarithmic differentiation for a product/quotient of powers.
f(x) = (x+1)^7 * sqrt(1 + x^2) / (x^2 - x + 1)^6.
Take logs (near x = 0 all factors are positive):
log f = 7 log(x + 1) + (1/2) log(1 + x^2) - 6 log(x^2 - x + 1).
Differentiate:
f'/f = 7/(x + 1) + (1/2)(2x)/(1 + x^2) - 6(2x - 1)/(x^2 - x + 1)
= 7/(x + 1) + x/(1 + x^2) - 6(2x - 1)/(x^2 - x + 1). …
- KCET 2022Set C-41 markMCQQ.If y=xsinx+(sinx)x then dxdy at x=2π is (A) πlog2π (B) 1 (C) 2π2 (D) 0
›Reveal solutionSolution
Both terms are of the form (variable)variable, so differentiate each by taking logarithms; at x=π/2 the substitutions sin=1, cos=0, cot=0, log1=0 collapse everything to 1+0.
Step 1 — Why logarithmic differentiation
Neither xsinx nor (sinx)x is a power function or an exponential function — the base and the exponent both vary. So neither the power rule nor the exponential rule applies directly. The standard tool is to take log, use log(ab)=bloga, and differentiate implicitly. Split the sum:
y=u+v,u=xsinx,v=(sinx)x,dxdy=dxdu+dxdv
Step 2 — Differentiate u=xsinx
logu=sinxlogx
Differentiate both sides (product rule on the right):
u1dxdu=cosxlogx+sinx⋅x1
dxdu=xsinx[cosxlogx+xsinx]
Now put x=2π, where sinx=1 and cosx=0:
dxdu=(2π)1[0⋅log2π+π/21]=2π⋅π2=1
Step 3 — Differentiate v=(sinx)x
logv=xlog(sinx) …
- KCET 2020Set A-11 markMCQQ.If 2x+2y=2x+y, then dxdy is (A) 2y−x (B) −2y−x (C) 2x−y (D) 2x−12y−1
›Reveal solutionSolution
dxdy=−2y−x — option (B).
Differentiate 2x+2y=2x+y with respect to x (each term contributes a common factor log2, which cancels):
2x+2ydxdy=2x+y(1+dxdy)
Collect dxdy:
dxdy(2y−2x+y)=2x+y−2x⇒dxdy=2y(1−2x)2x(2y−1) …
- KCET 2018Set A-11 markMCQQ.Let f(x)=x−x1 then f′(−1) is (A) 0 (B) 2 (C) 1 (D) −2
›Reveal solutionSolution
Rewrite x1 as x−1, apply the power rule term by term, then evaluate at x=−1.
Step 1 — Rewrite in power form.
f(x)=x−x1=x−x−1
Writing the reciprocal as a negative power lets us use the single power rule dxdxn=nxn−1 on both terms.
Step 2 — Differentiate.
f′(x)=dxd(x)−dxd(x−1)=1−(−1⋅x−2)=1+x−2=1+x21
Note the double negative: the derivative of −x−1 is +x−2. Dropping this sign gives 1−x21=0 at x=−1 — which is exactly the trap behind option (A).
Step 3 — Evaluate at x=−1.
f′(−1)=1+(−1)21=1+11=2 …
- KCET 2018Set A-11 markMCQQ.If x,y,z∈R, then the value of determinant (5x+5−x)2(6x+6−x)2(7x+7−x)2(5x−5−x)2(6x−6−x)2(7x−7−x)2111 is (A) 10 (B) 12 (C) 1 (D) 0
›Reveal solutionSolution
The identity (a+b)2−(a−b)2=4ab makes column 1 minus column 2 equal to the constant 4 in every row, so the columns are linearly dependent and the determinant is 0.
Step 1 — Write the determinant.
Δ=(5x+5−x)2(6x+6−x)2(7x+7−x)2(5x−5−x)2(6x−6−x)2(7x−7−x)2111
Step 2 — Use the algebraic identity row-wise.
For any base a>0, put u=ax and v=a−x. Then uv=axa−x=a0=1, and
(u+v)2−(u−v)2=4uv=4.
So for each of the three rows (bases 5, 6, 7 alike) the first entry minus the second entry equals exactly 4.
Step 3 — Column operation.
A determinant is unchanged if we replace a column by itself minus multiples of other columns. Apply C1→C1−C2−4C3:
C1 becomes 4−44−44−4=000 …
- KCET 2018Set A-11 markMCQQ.If cosy=xcos(a+y) with cosa=±1, then dxdy is equal to (A) cos2(a+y)sina (B) sinacos2(a+y) (C) sin2(a+y)cosa (D) cosacos2(a+y)
›Reveal solutionSolution
Solve for x explicitly, differentiate x with respect to y (much cleaner than implicit differentiation), then invert.
Step 1 — Express x explicitly.
Given cosy=xcos(a+y) with cosa=±1,
x=cos(a+y)cosy
Step 2 — Differentiate with respect to y (quotient rule).
dydx=cos2(a+y)cos(a+y)⋅(−siny)−cosy⋅(−sin(a+y))
=cos2(a+y)sin(a+y)cosy−cos(a+y)siny
Step 3 — Collapse the numerator with the sine-difference identity.
sinAcosB−cosAsinB=sin(A−B)
with A=a+y, B=y:
sin(a+y)cosy−cos(a+y)siny=sin((a+y)−y)=sina
So
dydx=cos2(a+y)sina …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.