Q.Find dxdy in the following: x3logx
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Derivative Evaluation
Derivative Evaluation
To evaluate a derivative means to find f′(a) — a single number that tells you how fast f is changing right at x=a. Think of a speedometer: it doesn't report how far you've travelled, only how fast your position is changing at this instant. That instantaneous rate of change is exactly what f′(a) measures.
The geometric picture
On the curve y=f(x), pick a point P and a nearby point Q. The straight line through them — the secant — has slope equal to the average rate of change between P and Q. Now slide Q toward P: the secant rotates into the tangent line that just touches the curve at P, and its slope is f′(a).
f′(a) is the slope of the tangent to y=f(x) at x=a — how steep the curve is right there.
The limit definition
f′(a)=limh→0hf(a+h)−f(a)
Here h is a tiny step from a to a+h, the numerator is the matching change in height, and the ratio is a secant slope. As h→0 the secant becomes the tangent. An equivalent form is
f′(a)=limx→ax−af(x)−f(a).
When this limit exists, f is differentiable at a (which forces continuity there).
Continuity alone is not enough. f(x)=∣x∣ is continuous at 0, but its left slope −1 and right slope +1 disagree, so f′(0) does not exist — a corner has no single tangent.
A worked evaluation
For f(x)=x2 at x=3:
f′(3)=limh→0h(3+h)2−9=limh→0(6+h)=6.
So the tangent at x=3 has slope 6.
From a number to a function …
Concept: Chain Rule — differentiate the outer function (cube) first, then multiply by the derivative of the inner function (logx).
Let y=x3logx. This is a product, not a composition, so we use the product rule:
dxdy=dxd(x3)⋅logx+x3⋅dxd(logx)
Step 1: dxd(x3)=3x2
Step 2: dxd(logx)=x1 (assuming base e)
Substitute: …
We differentiate x3logx using the product rule (since it is a product of x3 and logx). The derivative is 3x2logx+x2.
The function given is y=x3logx. This is a product of two distinct functions: x3 (a power function) and logx (the natural logarithm). Whenever you have a product of two functions, the natural tool is the product rule, not the chain rule. The chain rule would apply if we had a composition like log(x3) or (x3)2, but here the functions are multiplied, not nested.
The product rule states: if y=u⋅v, then
dxdy=udxdv+vdxdu.
Let’s apply it step by step.
-
Identify the two factors.
Let u=x3 and v=logx.
(Here logx means the natural logarithm, base e, as is standard in calculus.)
-
Differentiate each factor separately.
- Derivative of u=x3:
dxdu=3x2.
- Derivative of v=logx:
dxdv=x1.
- Apply the product rule.
dxdy=udxdv+vdxdu=x3⋅x1+logx⋅3x2.
- Simplify the first term. x3⋅x1=x2. So we have:
dxdy=x2+3x2logx.
- Factor if desired (optional). Both terms share a factor x2, so we can write: …
Method: The Product Rule (with Chain Rule on Each Factor)
When two functions of x are multiplied together, neither the sum rule nor differentiating each factor separately and multiplying works — the product rule is required.
Steps
Step 1: Identify the two factors u(x) and v(x) being multiplied
Step 2: Differentiate each factor separately
If either factor is itself composite, apply the chain rule to it individually at this stage.
Step 3: Combine using the product rule
dxd(uv)=udxdv+vdxdu. …
Common Mistakes
Mistake 1: Treating logx as a constant and only differentiating x3.
Why it's wrong: logx is itself a function of x and contributes its own term via the product rule — skipping it loses the entire 3x2logx piece of the answer. Correct approach: identify both factors as functions of x before applying the product rule.
Mistake 2: Forgetting to simplify x3⋅x1 to x2. …
Showing the 12 most recent of 14 on this concept.
- KCET 2025Set A-11 markMCQQ.limx→1x−1x4−x is (A) 0 (B) 7 (C) Does not exist (D) 21
›Reveal solutionSolution
Substitute t=x to clear the radicals, factor out the common t, and use the standard limit limt→1t−1tn−1=n.
Step 1 — Recognise the indeterminate form
At x=1: numerator =14−1=0, denominator =1−1=0. So the limit is of the form 00 — it exists (option (C) is a trap) but must be resolved by cancelling the common factor.
Step 2 — Substitute to remove the radicals
Let
t=x⟹x=t2,x→1⇒t→1
Then x4=t8 and x=t, so
L=limx→1x−1x4−x=limt→1t−1t8−t
Everything is now a polynomial — much easier to factor.
Step 3 — Factor and split
t−1t8−t=t−1t(t7−1)=t⋅t−1t7−1
Step 4 — Apply the standard limit
The standard result (from the binomial/derivative definition) is
limt→at−atn−an=nan−1
With a=1, n=7: …
- KCET 2025Set A-11 markMCQQ.A function f(x)=⎩⎨⎧ex1+1ex1−1,0,if x=0if x=0 is (A) continuous at x=0 (B) not continuous at x=0 (C) differentiable at x=0 (D) differentiable at x=0, but not continuous at x=0
›Reveal solutionSolution
Evaluate the two one-sided limits: e1/x→∞ from the right and →0 from the left, giving limits +1 and −1 — they disagree, so f is discontinuous at 0.
1. The continuity test. f is continuous at x=0 iff
limx→0−f(x)=limx→0+f(x)=f(0)
Here f(0)=0 by definition. The whole question hinges on the behaviour of the exponent x1, which blows up in opposite directions on the two sides of 0.
2. Right-hand limit (x→0+). Then x1→+∞, so t=e1/x→+∞. Divide numerator and denominator by t (the standard trick when a term dominates):
limx→0+e1/x+1e1/x−1=limt→∞t+1t−1=limt→∞1+t11−t1=1+01−0=+1
3. Left-hand limit (x→0−). Now x1→−∞, so t=e1/x→0. Substitute directly:
limx→0−e1/x+1e1/x−1=0+10−1=−1
4. Compare.
limx→0−f(x)=−1=+1=limx→0+f(x) …
- KCET 2025Set A-11 markMCQQ.The derivative of sinx with respect to logx is (A) cosx (B) xcosx (C) logxcosx (D) xcosx
›Reveal solutionSolution
"Derivative of u with respect to v" means dvdu=dv/dxdu/dx — differentiate both with respect to x and divide.
Step 1 — Name the two functions.
u=sinx,v=logx(x>0).
We are asked for dvdu, not dxdu.
Step 2 — The chain rule in ratio form. Since both are functions of the common variable x,
dvdu=dxdu⋅dvdx=dv/dxdu/dx(valid where dxdv=0).
Step 3 — Differentiate each with respect to x.
dxdu=cosx,dxdv=x1.
Step 4 — Divide. …
- COMEDK 2025Set 2025-M1 markMCQQ.If y=ax+xa, then 2xydxdy is equal to (A) x+xa (B) axx2+a2 (C) ax−xa (D) xa−ax
›Reveal solutionSolution
The key is to simplify y before differentiating, using the identity (u+1/u)2=u+1/u+2. This avoids messy chain rules and leads directly to 2xydxdy=ax−xa, which matches option (C).
Concept & Intuition
When a function involves sums of square roots of reciprocals, squaring it often reveals a simpler algebraic relationship. Here, y=x/a+a/x looks symmetric. Instead of differentiating directly (which would involve messy chain rules and square roots), we can square both sides to get a polynomial-like relation. Then implicit differentiation becomes clean and straightforward.
Step-by-step solution
- Square both sides Let y=ax+xa. Square:
y2=ax+xa+2ax⋅xa=ax+xa+2.
The cross-term simplifies because ax⋅xa=1=1.
- Rewrite as an implicit relation So we have:
y2=ax+xa+2.
This is much simpler than the original form.
- Differentiate implicitly with respect to x Differentiate both sides:
2ydxdy=a1−x2a.
(Recall dxd(x−1)=−1/x2, so dxd(a/x)=−a/x2.)
- Multiply both sides by x We want 2xydxdy, so multiply the equation by x: …
- KCET 2023Set A-21 markMCQQ.The value of elog10tan1∘+log10tan2∘+log10tan3∘+…+log10tan89∘ is (A) 3 (B) e1 (C) 1 (D) 0
›Reveal solutionSolution
Convert the sum of logs into the log of a product, pair complementary angles so every pair multiplies to 1, and the exponent collapses to 0.
Step 1 — Sum of logs = log of product.
log10tan1∘+log10tan2∘+⋯+log10tan89∘=log10(tan1∘⋅tan2∘⋯tan89∘)
Step 2 — Pair complementary angles.
The key identity is tan(90∘−θ)=cotθ=tanθ1, so
tanθ⋅tan(90∘−θ)=1.
Pair the 88 terms other than 45∘: …
- KCET 2023Set A-21 markMCQQ.If y=asinx+bcosx, then y2+(dxdy)2 is a (A) function of y (B) function of x and y (C) constant (D) function of x
›Reveal solutionSolution
The expression y2+(dxdy)2 simplifies to a constant a2+b2, independent of x and y.
The key insight here is that when you have a linear combination of sinx and cosx, the derivative simply swaps and alternates signs between them. Squaring and adding the function and its derivative often produces a Pythagorean identity that cancels the x-dependence entirely.
Let’s work through it step by step.
-
Write down the given function and its derivative.
We have y=asinx+bcosx.
Differentiating term by term:
dxdy=acosx−bsinx.
-
Square both y and dxdy.
y2=(asinx+bcosx)2=a2sin2x+2absinxcosx+b2cos2x.
(dxdy)2=(acosx−bsinx)2=a2cos2x−2absinxcosx+b2sin2x.
-
Add the two squares.
y2+(dxdy)2=(a2sin2x+b2cos2x+a2cos2x+b2sin2x)+(2absinxcosx−2absinxcosx).
The cross terms cancel exactly. Group the sin2 and cos2 terms:
=a2(sin2x+cos2x)+b2(cos2x+sin2x). …
-
- COMEDK 2023Set 2023-E1 markMCQQ.If f(x)=(x2−x+1)6(x+1)71+x2 then the value of f′(0) is equal to (A) 15 (B) 2 (C) 13 (D) 11
›Reveal solutionSolution
Therefore f'(0) = f(0) * 13 = 13.
Concept: logarithmic differentiation for a product/quotient of powers.
f(x) = (x+1)^7 * sqrt(1 + x^2) / (x^2 - x + 1)^6.
Take logs (near x = 0 all factors are positive):
log f = 7 log(x + 1) + (1/2) log(1 + x^2) - 6 log(x^2 - x + 1).
Differentiate:
f'/f = 7/(x + 1) + (1/2)(2x)/(1 + x^2) - 6(2x - 1)/(x^2 - x + 1)
= 7/(x + 1) + x/(1 + x^2) - 6(2x - 1)/(x^2 - x + 1). …
- KCET 2022Set C-41 markMCQQ.If y=xsinx+(sinx)x then dxdy at x=2π is (A) πlog2π (B) 1 (C) 2π2 (D) 0
›Reveal solutionSolution
Both terms are of the form (variable)variable, so differentiate each by taking logarithms; at x=π/2 the substitutions sin=1, cos=0, cot=0, log1=0 collapse everything to 1+0.
Step 1 — Why logarithmic differentiation
Neither xsinx nor (sinx)x is a power function or an exponential function — the base and the exponent both vary. So neither the power rule nor the exponential rule applies directly. The standard tool is to take log, use log(ab)=bloga, and differentiate implicitly. Split the sum:
y=u+v,u=xsinx,v=(sinx)x,dxdy=dxdu+dxdv
Step 2 — Differentiate u=xsinx
logu=sinxlogx
Differentiate both sides (product rule on the right):
u1dxdu=cosxlogx+sinx⋅x1
dxdu=xsinx[cosxlogx+xsinx]
Now put x=2π, where sinx=1 and cosx=0:
dxdu=(2π)1[0⋅log2π+π/21]=2π⋅π2=1
Step 3 — Differentiate v=(sinx)x
logv=xlog(sinx) …
- KCET 2020Set A-11 markMCQQ.If 2x+2y=2x+y, then dxdy is (A) 2y−x (B) −2y−x (C) 2x−y (D) 2x−12y−1
›Reveal solutionSolution
dxdy=−2y−x — option (B).
Differentiate 2x+2y=2x+y with respect to x (each term contributes a common factor log2, which cancels):
2x+2ydxdy=2x+y(1+dxdy)
Collect dxdy:
dxdy(2y−2x+y)=2x+y−2x⇒dxdy=2y(1−2x)2x(2y−1) …
- KCET 2018Set A-11 markMCQQ.Let f(x)=x−x1 then f′(−1) is (A) 0 (B) 2 (C) 1 (D) −2
›Reveal solutionSolution
Rewrite x1 as x−1, apply the power rule term by term, then evaluate at x=−1.
Step 1 — Rewrite in power form.
f(x)=x−x1=x−x−1
Writing the reciprocal as a negative power lets us use the single power rule dxdxn=nxn−1 on both terms.
Step 2 — Differentiate.
f′(x)=dxd(x)−dxd(x−1)=1−(−1⋅x−2)=1+x−2=1+x21
Note the double negative: the derivative of −x−1 is +x−2. Dropping this sign gives 1−x21=0 at x=−1 — which is exactly the trap behind option (A).
Step 3 — Evaluate at x=−1.
f′(−1)=1+(−1)21=1+11=2 …
- KCET 2018Set A-11 markMCQQ.If x,y,z∈R, then the value of determinant (5x+5−x)2(6x+6−x)2(7x+7−x)2(5x−5−x)2(6x−6−x)2(7x−7−x)2111 is (A) 10 (B) 12 (C) 1 (D) 0
›Reveal solutionSolution
The identity (a+b)2−(a−b)2=4ab makes column 1 minus column 2 equal to the constant 4 in every row, so the columns are linearly dependent and the determinant is 0.
Step 1 — Write the determinant.
Δ=(5x+5−x)2(6x+6−x)2(7x+7−x)2(5x−5−x)2(6x−6−x)2(7x−7−x)2111
Step 2 — Use the algebraic identity row-wise.
For any base a>0, put u=ax and v=a−x. Then uv=axa−x=a0=1, and
(u+v)2−(u−v)2=4uv=4.
So for each of the three rows (bases 5, 6, 7 alike) the first entry minus the second entry equals exactly 4.
Step 3 — Column operation.
A determinant is unchanged if we replace a column by itself minus multiples of other columns. Apply C1→C1−C2−4C3:
C1 becomes 4−44−44−4=000 …
- KCET 2018Set A-11 markMCQQ.If cosy=xcos(a+y) with cosa=±1, then dxdy is equal to (A) cos2(a+y)sina (B) sinacos2(a+y) (C) sin2(a+y)cosa (D) cosacos2(a+y)
›Reveal solutionSolution
Solve for x explicitly, differentiate x with respect to y (much cleaner than implicit differentiation), then invert.
Step 1 — Express x explicitly.
Given cosy=xcos(a+y) with cosa=±1,
x=cos(a+y)cosy
Step 2 — Differentiate with respect to y (quotient rule).
dydx=cos2(a+y)cos(a+y)⋅(−siny)−cosy⋅(−sin(a+y))
=cos2(a+y)sin(a+y)cosy−cos(a+y)siny
Step 3 — Collapse the numerator with the sine-difference identity.
sinAcosB−cosAsinB=sin(A−B)
with A=a+y, B=y:
sin(a+y)cosy−cos(a+y)siny=sin((a+y)−y)=sina
So
dydx=cos2(a+y)sina …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.