Q.If π(π₯) = π₯ tanβ1 π₯ , then πβ²(1)is equal to
(A) π 4 β 1 2
(B) π 4 + 1 2
(C) β π 4 β 1 2
(D) β π 4 + 1 2
πYou're viewing a preview β the full solution, concept, methods & PYQ mapping are locked.
π Start your 14-day free trial to unlock the full solution βConcept understanding β Derivative Evaluation
Derivative Evaluation
To evaluate a derivative means to find fβ²(a) β a single number that tells you how fast f is changing right at x=a. Think of a speedometer: it doesn't report how far you've travelled, only how fast your position is changing at this instant. That instantaneous rate of change is exactly what fβ²(a) measures.
The geometric picture
On the curve y=f(x), pick a point P and a nearby point Q. The straight line through them β the secant β has slope equal to the average rate of change between P and Q. Now slide Q toward P: the secant rotates into the tangent line that just touches the curve at P, and its slope is fβ²(a).
fβ²(a) is the slope of the tangent to y=f(x) at x=a β how steep the curve is right there.
The limit definition
fβ²(a)=limhβ0βhf(a+h)βf(a)β
Here h is a tiny step from a to a+h, the numerator is the matching change in height, and the ratio is a secant slope. As hβ0 the secant becomes the tangent. An equivalent form is
fβ²(a)=limxβaβxβaf(x)βf(a)β.
When this limit exists, f is differentiable at a (which forces continuity there).
Continuity alone is not enough. f(x)=β£xβ£ is continuous at 0, but its left slope β1 and right slope +1 disagree, so fβ²(0) does not exist β a corner has no single tangent.
A worked evaluation
For f(x)=x2 at x=3:
fβ²(3)=limhβ0βh(3+h)2β9β=limhβ0β(6+h)=6.
So the tangent at x=3 has slope 6.
From a number to a function β¦
Concept: Derivative Evaluation β differentiate f(x)=xtanβ1x using the product rule, then substitute x=1.
Step 1: Apply product rule:
fβ²(x)=(1)β tanβ1x+xβ 1+x21β.
Step 2: Simplify:
fβ²(x)=tanβ1x+1+x2xβ.
Step 3: Substitute x=1: β¦
The derivative of f(x)=xtanβ1x is found using the product rule. Evaluating at x=1 gives fβ²(1)=4Οβ+21β, which corresponds to option (B).
The key here is recognizing that f(x) is a product of two functions: x and tanβ1x (inverse tangent, also written as arctanx). When you see a product, your first instinct should be the product rule β not expanding or simplifying, because thereβs nothing to simplify here. The derivative of tanβ1x is a standard result: dxdβtanβ1x=1+x21β. Thatβs the only βtrickyβ part; everything else is straightforward algebra.
Letβs walk through it.
-
Apply the product rule.
For f(x)=u(x)β v(x), we have fβ²(x)=uβ²(x)v(x)+u(x)vβ²(x).
Here, let u(x)=x and v(x)=tanβ1x.
Then uβ²(x)=1, and vβ²(x)=1+x21β.
So:
fβ²(x)=(1)β tanβ1x+xβ 1+x21β=tanβ1x+1+x2xβ.
- Evaluate at x=1. Substitute x=1 into the derivative:
fβ²(1)=tanβ1(1)+1+121β=tanβ1(1)+21β.
Now, tanβ1(1) is the angle whose tangent is 1. That angle is 4Οβ (since tan4Οβ=1).
Therefore:
fβ²(1)=4Οβ+21β.
- Match with the options. The options are given as combinations of 4Οβ and 21β with plus/minus signs. Our result 4Οβ+21β exactly matches option (B). β¦
Method: Differentiating a Product Involving an Inverse Trigonometric Function
Use this method whenever f(x) is a product of a simple algebraic factor (like x) and an inverse trig function (like tanβ1x, sinβ1x, etc.), and you need fβ²(a) at a specific point.
Steps
Step 1: Recognize the product structure
Identify the two factors being multiplied, u(x) and v(x), so you know to reach for the product rule rather than trying to simplify the expression first (there is usually nothing to simplify before differentiating).
Step 2: Recall the standard derivative of the inverse trig factor
Memorize (or quickly re-derive) the standard results:
dxdβtanβ1x=1+x21β,dxdβsinβ1x=1βx2β1β,dxdβcosβ1x=1βx2ββ1β. β¦
Common Mistakes
Mistake 1: Skipping the product rule
A student might try to differentiate xtanβ1x as if it were a single function, or differentiate only the tanβ1x part and ignore the leading x. Why it's wrong: whenever two functions of x are multiplied together, both factors contribute to the derivative through the product rule; dropping one term silently loses information. Correct approach: explicitly label u(x)=x and v(x)=tanβ1x before differentiating, so both terms are accounted for.
Mistake 2: Confusing the derivative of tanβ1x with the derivative of tanx β¦
Showing the 12 most recent of 14 on this concept.
- KCET 2018Set A-11 markMCQQ.Let f(x)=xβx1β then fβ²(β1) is (A) 0 (B) 2 (C) 1 (D) β2
βΊReveal solutionSolution
Rewrite x1β as xβ1, apply the power rule term by term, then evaluate at x=β1.
Step 1 β Rewrite in power form.
f(x)=xβx1β=xβxβ1
Writing the reciprocal as a negative power lets us use the single power rule dxdβxn=nxnβ1 on both terms.
Step 2 β Differentiate.
fβ²(x)=dxdβ(x)βdxdβ(xβ1)=1β(β1β xβ2)=1+xβ2=1+x21β
Note the double negative: the derivative of βxβ1 is +xβ2. Dropping this sign gives 1βx21β=0 at x=β1 β which is exactly the trap behind option (A).
Step 3 β Evaluate at x=β1.
fβ²(β1)=1+(β1)21β=1+11β=2 β¦
- COMEDK 2023Set 2023-E1 markMCQQ.If f(x)=(x2βx+1)6(x+1)71+x2ββ then the value of fβ²(0) is equal to (A) 15 (B) 2 (C) 13 (D) 11
βΊReveal solutionSolution
Therefore f'(0) = f(0) * 13 = 13.
Concept: logarithmic differentiation for a product/quotient of powers.
f(x) = (x+1)^7 * sqrt(1 + x^2) / (x^2 - x + 1)^6.
Take logs (near x = 0 all factors are positive):
log f = 7 log(x + 1) + (1/2) log(1 + x^2) - 6 log(x^2 - x + 1).
Differentiate:
f'/f = 7/(x + 1) + (1/2)(2x)/(1 + x^2) - 6(2x - 1)/(x^2 - x + 1)
= 7/(x + 1) + x/(1 + x^2) - 6(2x - 1)/(x^2 - x + 1). β¦
- KCET 2022Set C-41 markMCQQ.If y=xsinx+(sinx)x then dxdyβ at x=2Οβ is (A) Οlog2Οβ (B) 1 (C) 2Ο2β (D) 0
βΊReveal solutionSolution
Both terms are of the form (variable)variable, so differentiate each by taking logarithms; at x=Ο/2 the substitutions sin=1,Β cos=0,Β cot=0,Β log1=0 collapse everything to 1+0.
Step 1 β Why logarithmic differentiation
Neither xsinx nor (sinx)x is a power function or an exponential function β the base and the exponent both vary. So neither the power rule nor the exponential rule applies directly. The standard tool is to take log, use log(ab)=bloga, and differentiate implicitly. Split the sum:
y=u+v,u=xsinx,v=(sinx)x,dxdyβ=dxduβ+dxdvβ
Step 2 β Differentiate u=xsinx
logu=sinxlogx
Differentiate both sides (product rule on the right):
u1βdxduβ=cosxlogx+sinxβ x1β
dxduβ=xsinx[cosxlogx+xsinxβ]
Now put x=2Οβ, where sinx=1 and cosx=0:
dxduβ=(2Οβ)1[0β log2Οβ+Ο/21β]=2Οββ Ο2β=1
Step 3 β Differentiate v=(sinx)x
logv=xlog(sinx) β¦
- KCET 2025Set A-11 markMCQQ.A function f(x)=β©β¨β§βex1β+1ex1ββ1β,0,βifΒ xξ =0ifΒ x=0β is (A) continuous at x=0 (B) not continuous at x=0 (C) differentiable at x=0 (D) differentiable at x=0, but not continuous at x=0
βΊReveal solutionSolution
Evaluate the two one-sided limits: e1/xββ from the right and β0 from the left, giving limits +1 and β1 β they disagree, so f is discontinuous at 0.
1. The continuity test. f is continuous at x=0 iff
limxβ0ββf(x)=limxβ0+βf(x)=f(0)
Here f(0)=0 by definition. The whole question hinges on the behaviour of the exponent x1β, which blows up in opposite directions on the two sides of 0.
2. Right-hand limit (xβ0+). Then x1ββ+β, so t=e1/xβ+β. Divide numerator and denominator by t (the standard trick when a term dominates):
limxβ0+βe1/x+1e1/xβ1β=limtβββt+1tβ1β=limtβββ1+t1β1βt1ββ=1+01β0β=+1
3. Left-hand limit (xβ0β). Now x1ββββ, so t=e1/xβ0. Substitute directly:
limxβ0ββe1/x+1e1/xβ1β=0+10β1β=β1
4. Compare.
limxβ0ββf(x)=β1ξ =+1=limxβ0+βf(x) β¦
- KCET 2025Set A-11 markMCQQ.limxβ1βxββ1x4βxββ is (A) 0 (B) 7 (C) Does not exist (D) 21β
βΊReveal solutionSolution
Substitute t=xβ to clear the radicals, factor out the common t, and use the standard limit limtβ1βtβ1tnβ1β=n.
Step 1 β Recognise the indeterminate form
At x=1: numerator =14β1β=0, denominator =1ββ1=0. So the limit is of the form 00β β it exists (option (C) is a trap) but must be resolved by cancelling the common factor.
Step 2 β Substitute to remove the radicals
Let
t=xββΉx=t2,xβ1βtβ1
Then x4=t8 and xβ=t, so
L=limxβ1βxββ1x4βxββ=limtβ1βtβ1t8βtβ
Everything is now a polynomial β much easier to factor.
Step 3 β Factor and split
tβ1t8βtβ=tβ1t(t7β1)β=tβ tβ1t7β1β
Step 4 β Apply the standard limit
The standard result (from the binomial/derivative definition) is
limtβaβtβatnβanβ=nanβ1
With a=1, n=7: β¦
- KCET 2018Set A-11 markMCQQ.VERSION: 13-A 32. If f(x)=β©β¨β§βxβ1logeβxβkβxξ =1x=1β is continuous at x=1, then the value of k is (A) e (B) 1 (C) β1 (D) 0
βΊReveal solutionSolution
Continuity means k must equal limxβ1βxβ1lnxβ, a 00β form whose value is the standard limit 1.
Step 1 β The condition for continuity.
f is continuous at x=1 iff
limxβ1βf(x)=f(1)=k
So we must evaluate L=xβ1limβxβ1logeβxβ and set k=L.
Step 2 β Recognise the indeterminate form.
As xβ1: numerator logeβ1=0, denominator 1β1=0. It is 00β, so the limit is not read off by substitution.
Step 3 β Evaluate (method 1: substitution to a standard limit).
Put x=1+h, so hβ0 as xβ1:
L=limhβ0βhlogeβ(1+h)β=1
using the standard limit limhβ0βhln(1+h)β=1 (which follows from the series ln(1+h)=hβ2h2β+β―). β¦
- KCET 2025Set A-11 markMCQQ.The derivative of sinx with respect to logx is (A) cosx (B) xcosx (C) logxcosxβ (D) xcosxβ
βΊReveal solutionSolution
"Derivative of u with respect to v" means dvduβ=dv/dxdu/dxβ β differentiate both with respect to x and divide.
Step 1 β Name the two functions.
u=sinx,v=logx(x>0).
We are asked for dvduβ, not dxduβ.
Step 2 β The chain rule in ratio form. Since both are functions of the common variable x,
dvduβ=dxduββ dvdxβ=dv/dxdu/dxβ(validΒ whereΒ dxdvβξ =0).
Step 3 β Differentiate each with respect to x.
dxduβ=cosx,dxdvβ=x1β.
Step 4 β Divide. β¦
- KCET 2020Set A-11 markMCQQ.If 2x+2y=2x+y, then dxdyβ is (A) 2yβx (B) β2yβx (C) 2xβy (D) 2xβ12yβ1β
βΊReveal solutionSolution
dxdyβ=β2yβx β option (B).
Differentiate 2x+2y=2x+y with respect to x (each term contributes a common factor log2, which cancels):
2x+2ydxdyβ=2x+y(1+dxdyβ)
Collect dxdyβ:
dxdyβ(2yβ2x+y)=2x+yβ2xβdxdyβ=2y(1β2x)2x(2yβ1)β β¦
- KCET 2018Set A-11 markMCQQ.If cosy=xcos(a+y) with cosaξ =Β±1, then dxdyβ is equal to (A) cos2(a+y)sinaβ (B) sinacos2(a+y)β (C) sin2(a+y)cosaβ (D) cosacos2(a+y)β
βΊReveal solutionSolution
Solve for x explicitly, differentiate x with respect to y (much cleaner than implicit differentiation), then invert.
Step 1 β Express x explicitly.
Given cosy=xcos(a+y) with cosaξ =Β±1,
x=cos(a+y)cosyβ
Step 2 β Differentiate with respect to y (quotient rule).
dydxβ=cos2(a+y)cos(a+y)β (βsiny)βcosyβ (βsin(a+y))β
=cos2(a+y)sin(a+y)cosyβcos(a+y)sinyβ
Step 3 β Collapse the numerator with the sine-difference identity.
sinAcosBβcosAsinB=sin(AβB)
with A=a+y, B=y:
sin(a+y)cosyβcos(a+y)siny=sin((a+y)βy)=sina
So
dydxβ=cos2(a+y)sinaβ β¦
- COMEDK 2025Set 2025-M1 markMCQQ.If y=axββ+xaββ, then 2xydxdyβ is equal to (A) x+xaβ (B) axx2+a2β (C) axββxaβ (D) xaββaxβ
βΊReveal solutionSolution
The key is to simplify y before differentiating, using the identity (uβ+1/uβ)2=u+1/u+2. This avoids messy chain rules and leads directly to 2xydxdyβ=axββxaβ, which matches option (C).
Concept & Intuition
When a function involves sums of square roots of reciprocals, squaring it often reveals a simpler algebraic relationship. Here, y=x/aβ+a/xβ looks symmetric. Instead of differentiating directly (which would involve messy chain rules and square roots), we can square both sides to get a polynomial-like relation. Then implicit differentiation becomes clean and straightforward.
Step-by-step solution
- Square both sides Let y=axββ+xaββ. Square:
y2=axβ+xaβ+2axββ xaββ=axβ+xaβ+2.
The cross-term simplifies because axββ xaββ=1β=1.
- Rewrite as an implicit relation So we have:
y2=axβ+xaβ+2.
This is much simpler than the original form.
- Differentiate implicitly with respect to x Differentiate both sides:
2ydxdyβ=a1ββx2aβ.
(Recall dxdβ(xβ1)=β1/x2, so dxdβ(a/x)=βa/x2.)
- Multiply both sides by x We want 2xydxdyβ, so multiply the equation by x: β¦
- KCET 2023Set A-21 markMCQQ.The value of elog10βtan1β+log10βtan2β+log10βtan3β+β¦+log10βtan89β is (A) 3 (B) e1β (C) 1 (D) 0
βΊReveal solutionSolution
Convert the sum of logs into the log of a product, pair complementary angles so every pair multiplies to 1, and the exponent collapses to 0.
Step 1 β Sum of logs = log of product.
log10βtan1β+log10βtan2β+β―+log10βtan89β=log10β(tan1ββ tan2ββ―tan89β)
Step 2 β Pair complementary angles.
The key identity is tan(90ββΞΈ)=cotΞΈ=tanΞΈ1β, so
tanΞΈβ tan(90ββΞΈ)=1.
Pair the 88 terms other than 45β: β¦
- KCET 2023Set A-21 markMCQQ.If y=asinx+bcosx, then y2+(dxdyβ)2 is a (A) function of y (B) function of x and y (C) constant (D) function of x
βΊReveal solutionSolution
The expression y2+(dxdyβ)2 simplifies to a constant a2+b2, independent of x and y.
The key insight here is that when you have a linear combination of sinx and cosx, the derivative simply swaps and alternates signs between them. Squaring and adding the function and its derivative often produces a Pythagorean identity that cancels the x-dependence entirely.
Letβs work through it step by step.
-
Write down the given function and its derivative.
We have y=asinx+bcosx.
Differentiating term by term:
dxdyβ=acosxβbsinx.
-
Square both y and dxdyβ.
y2=(asinx+bcosx)2=a2sin2x+2absinxcosx+b2cos2x.
(dxdyβ)2=(acosxβbsinx)2=a2cos2xβ2absinxcosx+b2sin2x.
-
Add the two squares.
y2+(dxdyβ)2=(a2sin2x+b2cos2x+a2cos2x+b2sin2x)+(2absinxcosxβ2absinxcosx).
The cross terms cancel exactly. Group the sin2 and cos2 terms:
=a2(sin2x+cos2x)+b2(cos2x+sin2x). β¦
-
πUnlock everything free for 14 days
- βFull step-by-step solutions
- βConcept-first explanations
- βMethods, shortcuts & mistakes
- βPYQ mapping + timed mock tests
Full access for 14 days. No credit card required.