Speed of Sound in Gases – From Intuition to Precision
Imagine you're standing at one end of a long, empty hallway. Your friend is at the other end. When you clap your hands, the sound doesn't reach them instantly — it takes a small but noticeable fraction of a second. That delay is the speed of sound in air.
Now think about why sound travels at all. Sound is a mechanical wave — it needs a medium (like air, water, or steel) to travel. When you clap, you push the air molecules near your hands. Those molecules bump into their neighbours, which bump into the next ones, and so on. This chain of collisions carries the disturbance forward. The speed at which this "bump" travels depends on two things:
How stiff the medium is — how quickly it resists being compressed.
How heavy the medium is — how much inertia each molecule has.
In a gas, both of these are linked to temperature and the gas's molecular properties.
The Precise Statement
For an ideal gas, the speed of sound v is given by:
v=MγRT
Where:
γ (gamma) is the adiabatic index — the ratio of specific heats Cp/Cv. For air (mostly diatomic gases like N₂ and O₂), γ≈1.4.
R is the universal gas constant (8.314J/mol⋅K).
T is the absolute temperature in Kelvin.
M is the molar mass of the gas (in kg/mol).
v=MγRT
This formula tells you three key things:
Speed increases with temperature — hotter gas means faster molecules, so the disturbance propagates quicker.
Speed decreases with heavier molecules — a gas like helium (small M) has a much higher speed of sound than air. In helium, your voice sounds squeaky because sound travels faster, changing the resonance in your throat.
The factor γ matters — it accounts for the fact that compressions and rarefactions in a sound wave happen so fast that heat doesn't have time to flow. The process is adiabatic, not isothermal.
Why Adiabatic? (The "Why" Behind the Formula)
When a sound wave passes through a gas, the pressure and volume change rapidly — hundreds or thousands of times per second. There's no time for heat to flow from the compressed (hotter) regions to the rarefied (cooler) regions. So the gas behaves as if it's thermally isolated. That's why γ appears instead of 1 (which would be the isothermal case).
If you used the isothermal assumption, you'd get v=RT/M, which is about 20% too low for air. The correct adiabatic formula matches experiments beautifully.
A Quick Numerical Check
At room temperature (T=293K), for air (M≈0.029kg/mol, γ=1.4):
v=0.0291.4×8.314×293≈117,600≈343m/s
That's about 1235 km/h — the familiar value you've probably heard. …
The key idea is that the speed of sound in a gas depends on the ratio of pressure to density, which is linked to temperature and molecular mass via the ideal gas law.
Reasoning:
From v=ργP, use the ideal gas law P=MρRT (where M is molar mass). Substituting gives v=MγRT.
(a) Independence of pressure: In the expression v=MγRT, pressure P does not appear. A change in P at constant T causes a proportional change in ρ, so the ratio P/ρ remains constant.
(b) Increase with temperature: From v∝T, raising T directly increases the numerator, so v increases. …
Using the ideal-gas relation ρ=PM/RT turns the formula into v=γRT/M. Pressure cancels (part a); the explicit T gives v∝T (part b); and humid air has a smaller average molar mass M, so v rises (part c).
The key step
v=ργP
For an ideal gas, PV=nRT gives the density ρ=VnM=RTPM, where M is the molar mass. Substituting removes the explicit pressure:
v=PM/RTγP=MγRT
(a) Independent of pressure
At a fixed temperature, increasing the pressure increases the density in exactly the same proportion, so the ratio P/ρ is unchanged. In v=γRT/M the pressure has cancelled entirely, so the speed of sound in air does not depend on pressure.
(b) Increases with temperature
Temperature appears directly under the root, so
v∝T
A rise in temperature raises the molecular speeds, and the disturbance is passed on faster, so the speed of sound increases.
Step 1: Start from v=γP/ρ and eliminate ρ using the ideal gas law P=ρRT/M, so ρ=PM/RT, giving v=γRT/M.
Step 2 (a): Pressure P has cancelled out entirely from this form — at fixed temperature, ρ scales with P so the ratio P/ρ is unchanged, meaning v does not depend on pressure.
Step 3 (b):T appears explicitly under the square root, so v∝T — speed rises as temperature rises. …
Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.
KEAM 2026Set eng-2026-04214 marksMCQ
Q.With Laplace correction in Newton's formula for the velocity of sound in gases, the velocity of sound in monoatomic gas at STP is
(A) 5ρ7P
(B) 3ρ5P
(C) 2ρ2P
(D) 2ρ7P
(E) ρP
›Reveal solutionSolution
Laplace: v=γP/ρ; monoatomic γ=5/3 gives 5P/3ρ.
Newton's formula gives v=P/ρ (isothermal), which underestimates the speed. Laplace corrected it by treating sound propagation as adiabatic, giving …
Q.The graph drawn between the velocity of sound in a gas and pressure of the gas at a given temperature is
(A) a straight line with negative slope
(B) a straight line with positive slope
(C) a straight line parallel to pressure axis
(D) a parabola
(E) an exponential curve
›Reveal solutionSolution
Speed of sound v=γP/ρ; at fixed temperature P/ρ is constant, so v does not vary with pressure.
Q.If the ratio of the Young's modulii and densities of two rods of different materials are respectively, 3 : 2 and 3 : 1, then the ratio of the velocities of sound in the rods is
(A) 1 : 2
(B) 2 : 1
(C) 2:1
(D) 1:2
(E) 1 : 3
›Reveal solutionSolution
Speed of sound in a rod is v=Y/ρ; with Y ratio 3:2 and ρ ratio 3:1, the velocity ratio is (3/2)(1/3)=1:2.
Speed of longitudinal sound in a solid rod:
v=ρY.
Ratio for the two rods (Young's moduli Y1:Y2=3:2, densities ρ1:ρ2=3:1): …
Q.If T and ρ represent the temperature and density of a gas, then the velocity of sound in the gas is directly proportional to
(A) T
(B) ρ
(C) T
(D) ρ2
(E) T2
›Reveal solutionSolution
v=γRT/M, so at fixed composition the sound speed is ∝T.
The Laplace formula for the speed of sound in a gas is
Q.An ideal gas is compressed in volume by a factor of 2, while keeping its temperature constant. The speed of sound in it is:
(A) doubled
(B) unchanged
(C) reduced to half
(D) increased by 4 times
(E) reduced by 4 times
›Reveal solutionSolution
Speed of sound in an ideal gas depends only on temperature, so it is unchanged.
Concept and Intuition
The speed of sound in an ideal gas is v = sqrt(gamma R T / M). It depends on temperature and gas properties but not on pressure or volume independently. Compressing at constant temperature therefore leaves v unchanged.
Step-by-Step Solution
Write v = sqrt(gamma P / rho). During isothermal compression P and rho both change.
But for an ideal gas P/rho = R T / M, which stays constant at fixed T. …