Q.Suppose the average mass of raindrops is 3.0×10−5 kg and their average terminal velocity 9 m s−1. Calculate the energy transferred by rain to each square metre of the surface at a place which receives 100 cm of rain in a year.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Work Energy Theorem
The Work-Energy Theorem: From Intuition to Precision
Imagine pushing a heavy box across the floor. The harder you push and the farther it slides, the faster it moves when you let go. That connection — the push (force) over a distance (displacement) changing the box's speed — is exactly what the Work-Energy Theorem captures.
The Intuition First
Think of work as the "currency" that buys motion. When you do work on an object, you transfer energy to it. That energy shows up as kinetic energy — the energy of motion. The more work you do, the more the object's kinetic energy changes.
If you push a stationary ball, it starts moving. If you push a moving ball in the same direction, it speeds up. If you push against its motion, it slows down. In every case, the work done equals the change in the ball's kinetic energy.
Work is done by a force on an object. The object's kinetic energy changes by exactly that amount (assuming no other forces do work).
The Precise Statement
Wnet=ΔK=Kf−Ki
Where:
- Wnet is the net work done on the object (the total work from all forces combined)
- Kf is the final kinetic energy
- Ki is the initial kinetic energy
And kinetic energy is defined as:
K=21mv2
So the theorem can also be written as:
Wnet=21mvf2−21mvi2
Why "Net" Work Matters
This is the most common point of confusion. The theorem uses net work — the work done by the net force (the vector sum of all forces). If you push a box and friction opposes it, the net work is the work you do minus the work friction does. Only that net amount changes the kinetic energy.
If you push a box at constant speed, your work is positive, but friction does equal negative work. The net work is zero, so kinetic energy doesn't change — the box keeps moving at the same speed. Your work didn't "disappear"; it was dissipated as heat by friction.
A Simple Derivation (for constant force)
Consider a constant net force Fnet acting on an object of mass m over a displacement s. From Newton's second law:
Fnet=ma
From kinematics (constant acceleration):
vf2=vi2+2as
Multiply both sides by 21m:
21mvf2=21mvi2+mas
But mas=Fnets=Wnet, so:
21mvf2=21mvi2+Wnet
Rearranging:
Wnet=21mvf2−21mvi2=ΔK
The theorem holds even for variable forces and curved paths — the derivation uses calculus then, but the result is the same.
What It Tells You (and What It Doesn't) …
Concept: Work–Energy Theorem – the kinetic energy of the raindrops at terminal velocity is fully transferred to the ground upon impact.
Step 1 – Mass of rain per square metre
100 cm of rain = 1.0 m depth. Volume over 1 m² = 1.0 m3.
Mass = density × volume = 1000 kg/m3×1.0 m3=1000 kg.
Step 2 – Kinetic energy of one raindrop
K=21mv2=21(3.0×10−5)(9)2=21(3.0×10−5)(81)=1.215×10−3 J.
Step 3 – Number of drops and total energy …
Treat all the rain landing on 1m2 in a year as one mass M arriving at terminal speed vt. The energy it delivers is its kinetic energy 21Mvt2=4.05×104J.
Concept
Rain falls at (essentially constant) terminal velocity, so each drop reaches the ground with kinetic energy 21mvt2, which is transferred to the surface on impact. Summed over all the water that lands on one square metre, the transferred energy is 21Mvt2, where M is the total mass of that water. (The individual drop mass is not needed for the total.)
Step-by-step solution
1. Mass of rain per square metre. …
Concept: Kinetic Energy Delivered by Falling Rain
Step 1: Find the total mass of rain per square metre per year
100 cm = 1 m depth of rain over 1 m2 is a volume of 1 m3. With water density ρ=1000 kg/m3:
M=ρV=1000×1=1000 kg
Step 2: Note that terminal velocity means every drop arrives at the same speed …
- KEAM 2026Set eng-2026-04184 marksMCQQ.A bullet of mass 0.05 kg entering a heavy wooden block with a speed of 100 ms−1 is stopped in a distance of 50 cm. The average resistive force exerted by the block on the bullet is (A) 100 N (B) 150 N (C) 5000 N (D) 500 N (E) 250 N
›Reveal solutionSolution
Work-energy: the resistive force times distance equals the initial KE, giving F=2dmv2=500 N.
By the work-energy theorem, F⋅d=21mv2, so …
- KEAM 2026Set eng-2026-04184 marksMCQQ.A body of mass 2 kg at rest starts to move under the action of an applied horizontal force of 7 N on a table with coefficient of kinetic friction, 0.1. The kinetic energy of the body in 10 seconds is (g=10ms−2) (A) 1225 J (B) 100 J (C) 2025 J (D) 625 J (E) 725 J
›Reveal solutionSolution
Friction is 2 N, net force 5 N gives a=2.5 m/s2; after 10 s, v=25 m/s and KE =625 J. …
- KEAM 2026Set eng-2026-04204 marksMCQQ.A block of mass 2 kg slides on a rough horizontal surface (μk=0.2) with initial speed 10 ms−1. The distance travelled by the block before it stops is (g=10 ms−2) (A) 5 m (B) 12 m (C) 15 m (D) 21 m (E) 25 m
›Reveal solutionSolution
Friction alone decelerates the block: a=μkg, then use v2=u2−2as.
The kinetic friction produces a deceleration a=μkg=0.2×10=2 ms−2. Using v2=u2−2as with final speed v=0 and u=10 ms−1: …
- KEAM 2025Set eng-2025-04234 marksMCQQ.A body of mass 0.2 kg travels along a straight line path with velocity v=(2x2+2)m s−1. The net work done by the driving force during its displacement from x=0 to x=2m is (A) 5.4 J (B) 4.8 J (C) 9.6 J (D) 10.8 J (E) 6.5 J
›Reveal solutionSolution
Using the work-energy theorem, the net work done from x=0 to x=2m is 9.6 J.
Concept and Intuition
The net work done equals the change in kinetic energy. The velocity is given as a function of position, so we evaluate the kinetic energy at the two endpoints.
Step-by-Step Solution
- v=2x2+2. At x=0: v=2m/s; at x=2: v=2(4)+2=10m/s.
- KEi=21(0.2)(2)2=0.4J. …
- KEAM 2025Set pha-2025-0424A4 marksMCQQ.A rain drop of mass 10g falls from a height of 50 m from rest. If the loss of energy due to air resistance is 3J, then the velocity of the drop on striking the ground is (g=10ms−2) (A) 10 ms−1 (B) 5 ms−1 (C) 30 ms−1 (D) 40 ms−1 (E) 20 ms−1
›Reveal solutionSolution
KE=mgh−(energy lost)=(0.01)(10)(50)−3=5−3=2J. Then v=2KE/m=2×2/0.01=20ms−1.
Mass m=10g=0.01kg. Potential energy lost =mgh=0.01×10×50=5J. Subtracting the 3J lost to air resistance leaves 2J as kinetic energy …
- KEAM 2024Set eng-2024-06074 marksMCQQ.A particle of 100 g mass is projected vertically up with a kinetic energy of 20 J. The maximum height reached by the particle is (g = 10 ms−2) (neglecting air resistance) (A) 5 m (B) 10 m (C) 15 m (D) 20 m (E) 25 m
›Reveal solutionSolution
Kinetic energy at launch converts fully to potential energy at the top.
mgh=KE …
- KEAM 2024Set eng-2024-06094 marksMCQQ.A bullet of 10 g, moving at 250 ms−1 penetrates 5 cm into a tree limb before coming to rest. Assuming uniform force being exerted by the tree limb, the magnitude of the force is: (A) 12.5 N (B) 625 N (C) 62.5 N (D) 125 N (E) 6250 N
›Reveal solutionSolution
Use the work–energy theorem: the retarding force does work equal to the bullet's kinetic energy over the penetration depth. F=d21mv2=6250 N.
Given m=10 g=0.01 kg, v=250 m/s, d=5 cm=0.05 m.
Work done by the resisting force equals the initial kinetic energy:
Fd=21mv2 …
- KEAM 2022Set eng-2022-P1-A14 marksMCQQ.Work-energy theorem is an integral form of (A) Newton's first law (B) Law of equipartition of energy (C) Newton's second law (D) Newton's law of gravitation (E) Newton's third law
›Reveal solutionSolution
The work-energy theorem is the integral form of Newton's second law.
Concept and Intuition
Newton's second law F = m*(dv/dt) can be integrated over the path; the integral of force over displacement is work, and it equals the change in kinetic energy.
Step-by-Step Solution
- Start from F = ma = m(dv/dt).
- Integrate F dx over the path: integral of F dx = integral of m*v dv. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.