Q.Find the value of tan−1(tan65π)+cos−1(cos613π).
Concept understanding — Principal Value Domain
Principal Value Domain (Principal Branch)
Take sinx=21. It has infinitely many solutions: x=6π,65π,613π,−67π,… — every angle whose sine is 21. So if we want an inverse that returns a single angle for sin−1(0.5), we must first agree on one angle to report. A function is allowed only one output per input, and sinx over all of R is many-to-one — it fails the horizontal line test and cannot be inverted as it stands.
The idea: restrict to one clean interval
For each trigonometric ratio we restrict the angle to a single standard interval on which the function is one-to-one while still covering its entire range exactly once. On that interval the inverse becomes well-defined and single-valued. That interval — the set of angles the inverse is allowed to return — is the principal value branch (also called the principal value domain).
The interval is chosen to be strictly monotonic, to hit every output once, and to sit as close to 0 as possible. For sine that is [−2π,2π], where sin increases from −1 to 1.
The principal value branch of an inverse trig function is the interval of angles it returns — the restricted interval on which the original ratio is one-to-one and onto its range.
| Inverse function | Domain (allowed inputs x) | Principal value branch (angles returned) |
|---|---|---|
| sin−1x | [−1,1] | [−2π,2π] |
| cos−1x | [−1,1] | [0,π] |
| tan−1x | R | (−2π,2π) |
| cot−1x | R | (0,π) |
| sec−1x | (−∞,−1]∪[1,∞) | [0,π]∖{2π} |
| csc−1x | (−∞,−1]∪[1,∞) | [−2π,2π]∖{0} |
Why the intervals differ
They are not arbitrary. cosx is symmetric about 0, so [−2π,2π] would make it two-to-one; instead we use [0,π], where cos decreases from 1 to −1 one-to-one. Each function gets the interval where it is strictly monotonic and sweeps its full range exactly once.
sin−1(sinx)=x holds only when x∈[−2π,2π]. For x=65π, sin−1(sin65π)=sin−1(21)=6π, not 65π.
These principal branches are the standard convention in every textbook, exam, and calculator, so sin−1(0.5) is always 6π. Use them unless a problem explicitly says otherwise.
Principal value branches are formally defined in the NCERT Class 12 Inverse Trigonometric Functions chapter, and the full table of domains and ranges for sin⁻¹, cos⁻¹, tan⁻¹ and the rest is one of the most-memorized reference tables in CBSE board prep. If you're searching 'principal value branch of inverse trigonometric functions table' or 'inverse trig functions important questions class 12', this restricted-interval convention is exactly the concept those searches are pointing to.
Reduce each angle to its function's principal branch before evaluating.
Term 1: tan−1 has principal range (−2π,2π), and 65π lies outside it. Since tan has period π, tan65π=tan(65π−π)=tan(−6π), and −6π∈(−2π,2π). So tan−1(tan65π)=−6π.
Term 2: cos−1 has principal range [0,π]. Since 613π=2π+6π, cos613π=cos6π, and 6π∈[0,π]. So cos−1(cos613π)=6π.
Add: −6π+6π=0.
tan−1(tan65π)+cos−1(cos613π)=0
Bringing each angle into its inverse function's principal branch gives tan−1(tan65π)=−6π and cos−1(cos613π)=6π, so the sum is 0.
The idea
tan−1(tanθ)=θ and cos−1(cosθ)=θ hold only when θ already sits in the function's principal range. When it does not, we replace θ by a period-shifted angle that has the same trig value but does lie in the principal range.
Term 1: tan−1(tan65π)
The principal range of tan−1 is (−2π,2π), and 65π is outside it. Tangent has period π, so
tan65π=tan(65π−π)=tan(−6π).
Now −6π∈(−2π,2π), so
tan−1(tan65π)=−6π.
Term 2: cos−1(cos613π)
The principal range of cos−1 is [0,π]. Cosine has period 2π, and 613π=2π+6π, so
cos613π=cos6π.
Since 6π∈[0,π],
cos−1(cos613π)=6π.
Add
−6π+6π=0.
tan−1(tan65π)+cos−1(cos613π)=0
Method: Reducing f−1(f(θ)) to the principal branch
The general rule for any tan−1(tanθ), cos−1(cosθ), sin−1(sinθ) term: the answer is not automatically θ — you must bring θ into the outer function's principal range while keeping the trig value fixed.
Steps
Step 1: State the principal range of the OUTER inverse function.
tan−1: (−2π,2π)cos−1: [0,π]sin−1: [−2π,2π]
Step 2: Check whether the inside angle already lives there.
If θ is inside that range, the term is simply θ and you are done.
Step 3: If not, shift by a full period to an equivalent angle.
Use the period of the inner function — π for tangent, 2π for sine and cosine — to replace θ by an angle with the same trig value that does lie in the principal range:
tan(θ−π)=tanθ,cos(θ−2π)=cosθ.
For cosine you may also need evenness, cos(−α)=cosα, to land in [0,π].
Step 4: Read off the reduced angle and combine the terms.
Common Mistakes
Mistake 1: Writing tan−1(tan65π)=65π.
Why it's wrong: 65π is outside the arctan range (−2π,2π), so the cancellation is invalid. Correct approach: subtract the period π to get 65π−π=−6π, which is in range.
Mistake 2: Writing cos−1(cos613π)=613π.
Why it's wrong: 613π exceeds π, so it is not in the arccos range [0,π]. Correct approach: subtract 2π first — 613π−2π=6π, which lies in [0,π].
Mistake 3: Using the wrong period for the reduction.
Why it's wrong: tangent has period π but sine and cosine have period 2π; mixing them up gives an angle with the wrong value. Correct approach: shift tan arguments by π and cos arguments by 2π.
- KEAM 2026Set eng-2026-04184 marksMCQQ.If 5π−6cos−1(3(2x−1))=0, then the value of x is equal to (A) 21 (B) 2 (C) 41 (D) 4 (E) 0
›Reveal solutionSolution
Solve cos−1(⋅)=65π, giving 2x−1=−21, i.e. x=41.
From 5π−6cos−1(3(2x−1))=0:
cos−1(3(2x−1))=65π.
Taking cosine, cos65π=−23, so
3(2x−1)=−23⇒2x−1=−21⇒x=41.
✓Final answerThe correct option is (C).
- KEAM 2024Set eng-2024-06064 marksMCQQ.cos−1(cos(9−7π))= (A) 9−7π (B) 97π (C) 92π (D) 9−2π (E) 9−4π
›Reveal solutionSolution
cos−1 range is [0,π].
cos(−97π)=cos(97π), and 97π∈[0,π], so cos−1(cos97π)=97π.
✓Final answerThe correct option is (B).
- KEAM 2024Set eng-2024-06084 marksMCQQ.Domain of the function sin−1(2x−1) is (A) [0,1] (B) [0,∞] (C) [−∞,1] (D) [1,∞] (E) [−1,1]
›Reveal solutionSolution
The argument of sin−1 must lie in [−1,1].
For sin−1(2x−1) to be defined we need
−1≤2x−1≤1.
Adding 1: 0≤2x≤2, so 0≤x≤1.
The domain is [0,1].
✓Final answerThe correct option is (A).
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.