Q.Show that the displacement current produced is equal to the conduction current, when a capacitor is discharged. OR State the principle of production of electromagnetic waves. What is the value of velocity of these waves?

Showing the 12 most recent of 16 on this concept.

1. CBSE 2026Set V11 markMCQ
   Q.Displacement current is produced due to :

   (a) Constant electric field

   (b) Constant magnetic field

   (c) Changing electric field

   (d) Changing magnetic field

   ›Reveal solutionSolution

   (c) Changing electric field …

   🔒 Start your 14-day free trial to see the full solution →
2. CBSE 2026Set A1 markMCQ
   Q.The unit of displacement current is (A) Am (B) A (C) ΩA (D) ΩmA

   ›Reveal solutionSolution

   Displacement current is a form of current; its unit is the ampere (A).

   Maxwell introduced the displacement current to complete Ampère's law:

   $I_d=\varepsilon_0\frac{d\Phi_E}{dt}$

   …

   🔒 Start your 14-day free trial to see the full solution →
3. CBSE 2026Set ANNUAL1 mark
   Q.The concept of displacement current was given by a scientist named ______.

   ›Reveal solutionSolution

   Displacement current was proposed by James Clerk Maxwell to fix an inconsistency in Ampere's circuital law for circuits with a changing electric field (as between capacitor plates).

   Maxwell noticed that the original Ampere's law failed for a charging capacitor (no conduction current flows between the plates, yet a magnetic field is still observed there). He resolved this by introducing an additional 'disp …

   🔒 Start your 14-day free trial to see the full solution →
4. CBSE 2025Set X11 markMCQ
   Q.'Ampere-Maxwell Law' is written as (symbols have usual meanings) :

   (a) $\oint \vec{B}\cdot \vec{dl} = \mu_0 i + \mu_0 \varepsilon_0 \dfrac{d\phi_E}{dt}$

   (b) $\oint \vec{B}\cdot \vec{dl} = \mu_0 i + \varepsilon_0 \dfrac{d\phi_E}{dt}$

   (c) $\oint \vec{B}\cdot \vec{dl} = \mu_0 i$

   (d) $\oint \vec{E}\cdot \vec{dl} = -\dfrac{d\phi_B}{dt}$

   ›Reveal solutionSolution

   (a) $\oint \vec{B}\cdot d\vec{l} = \mu_0 i + \mu_0 \varepsilon_0 \dfrac{d\phi_E}{dt}$. Maxwell added the displacement-current term $\mu_0\varepsilon_0\dfrac{d\phi_E}{dt}$ to Ampere's law. Option ( …

   🔒 Start your 14-day free trial to see the full solution →
5. CBSE 2024Set 55/1/11 markMCQ
   Q.In the four regions, I, II, III and IV, the electric fields are described as : Region I : $E_x = E_0 \sin(kz - \omega t)$ Region II : $E_x = E_0$ Region III : $E_x = E_0 \sin kz$ Region IV : $E_x = E_0 \cos kz$ The displacement current will exist in the region : (A) I (B) IV (C) II (D) III

   ›Reveal solutionSolution

   Displacement current exists wherever the electric field varies with time. Only Region I has an explicit time dependence ($\sin(kz - \omega t)$), so displacement current exists only in Region I. The correct option is (A).

   Concept and Intuition

   Displacement current is not a current of moving charges — it is a term Maxwell added to Ampère's law to account for changing electric fields. The key idea is simple: wherever the electric field changes with time, there is a displacement current density given by $J_d = \varepsilon_0 \frac{\partial E}{\partial t}$.

   So the question reduces to: in which of these four regions does the electric field explicitly depend on time? A field that is constant in time, or one that depends only on position (like a static pattern), produces no displacement current.

   Let’s examine each region carefully.

   ---

   Step-by-step reasoning

   1. Region I: $E_x = E_0 \sin(kz - \omega t)$ This is a travelling wave — the field depends on both position $z$ and time $t$ through the combination $kz - \omega t$. Compute the partial derivative with respect to time:

   $\frac{\partial E_x}{\partial t} = E_0 \cdot (-\omega) \cos(kz - \omega t) = -\omega E_0 \cos(kz - \omega t)$

   This is non-zero (except at isolated instants). Therefore, displacement current exists in Region I.

   2. Region II: $E_x = E_0$ This is a constant, uniform field — no dependence on $t$ at all.

   $\frac{\partial E_x}{\partial t} = 0$

   No displacement current.

   3. Region III: $E_x = E_0 \sin kz$ Here the field depends only on position $z$, not on time.

   $\frac{\partial E_x}{\partial t} = 0$

   No displacement current. (This is a static sinusoidal pattern, like a standing wave at a frozen instant.)

   4. Region IV: $E_x = E_0 \cos kz$ …

   🔒 Start your 14-day free trial to see the full solution →
6. CBSE 2024Set A11 markMCQ
   Q.According to the generalised Ampere-Maxwell law, $\oint \vec{B}\cdot\vec{dl}$ is equal to

   (a) $\mu_0 I_c + \mu_0 \varepsilon_0 \dfrac{d\phi_E}{dt}$

   (b) $\mu_0 I_c$

   (c) $\varepsilon_0 \dfrac{d\phi_E}{dt}$

   (d) $\mu_0 \varepsilon_0 \dfrac{d\phi_E}{dt}$

   ›Reveal solutionSolution

   (a) $\mu_0 I_c + \mu_0 \varepsilon_0 \dfrac{d\phi_E}{dt}$ …

   🔒 Start your 14-day free trial to see the full solution →
7. CBSE 2024Set A1 mark
   Q.Fill in the blank with appropriate word: Variable electric field produce ______ current.

   ›Reveal solutionSolution

   Maxwell showed that a changing electric field acts as a source of magnetic field, just like a conduction current — this is called displacement current.

   Maxwell noted that Ampere's circuital law (in its original form) was inconsistent when applied to a charging capacitor. To fix this, he proposed that a time-varying electric field between the capacitor plates also gives rise to a magnetic field, exactly as a conduction current does. He called this the displacement current, defined as:

   $I_d = \varepsilon_0 \frac{d\Phi_E}{dt}$ …

   🔒 Start your 14-day free trial to see the full solution →
8. CBSE 2024Set ANNUAL1 markMCQ
   Q.The formula for displacement current (I_d) is -

   (a) μ0 dφE/dt

   (b) μ0 ε0 dφE/dt

   (c) ε0 dφE/dt

   (d) (1/ε0) dφE/dt

   ›Reveal solutionSolution

   Maxwell introduced displacement current to make Ampere's law consistent for time-varying electric fields (e.g. between capacitor plates); it equals ε₀ times the rate of change of electric flux.

   Maxwell showed that a changing electric flux $\phi_E$ through a surface is equivalent, in its magnetic effects, to a real conduction current. He defined the displacement current as:

   $I_d = \varepsilon_0 \dfrac{d\phi_E}{dt}$

   …

   🔒 Start your 14-day free trial to see the full solution →
9. CBSE 2023Set 55/1/11 markMCQ
   Q.In the process of charging of a capacitor, the current produced between the plates of the capacitor is :

   (a) $-\varepsilon_0\dfrac{d\Phi_E}{dt}$

   (b) $-\dfrac{1}{\varepsilon_0}\dfrac{d\Phi_E}{dt}$

   (c) $\varepsilon_0\dfrac{d\Phi_E}{dt}$

   (d) $\dfrac{1}{\varepsilon_0}\dfrac{d\Phi_E}{dt}$ where symbols have their usual meanings.

   ›Reveal solutionSolution

   The current between the plates of a charging capacitor is the displacement current, given by $\varepsilon_0 \frac{d\Phi_E}{dt}$, which matches option (c).

   Why This Question Matters

   When a capacitor charges, no actual charge carriers flow across the gap between the plates. Yet a magnetic field is observed around the gap — as if a current were flowing. Maxwell resolved this paradox by introducing the displacement current, a term that accounts for the changing electric field between the plates. This is the key idea behind the question.

   The symbols have their usual meanings: $\Phi_E$ is the electric flux through a surface between the plates, and $\varepsilon_0$ is the permittivity of free space.

   Step-by-Step Reasoning

   1. Recall Maxwell’s correction to Ampere’s law Ampere’s circuital law in its original form ($\oint \vec{B} \cdot d\vec{l} = \mu_0 I_{\text{enclosed}}$) fails for a charging capacitor — because the enclosed current changes depending on the surface chosen. Maxwell added a term to fix this:

   $\oint \vec{B} \cdot d\vec{l} = \mu_0 \left( I_{\text{conduction}} + I_{\text{displacement}} \right)$

   where $I_{\text{displacement}}$ is the displacement current.

   2. Define the displacement current Maxwell showed that a changing electric field produces a magnetic field just as a conduction current does. The displacement current through a surface is defined as:

   $I_d = \varepsilon_0 \frac{d\Phi_E}{dt}$

   Here $\Phi_E = \int \vec{E} \cdot d\vec{A}$ is the electric flux through the surface.

   3. Apply to the region between capacitor plates Between the plates of a charging capacitor, there is no conduction current — no free charges move across the gap. However, the electric field between the plates is changing as charge builds up. Therefore, the current that appears between the plates is purely the displacement current:

   $I_{\text{between plates}} = \varepsilon_0 \frac{d\Phi_E}{dt}$

   4. Check the sign …

   🔒 Start your 14-day free trial to see the full solution →
10. CBSE 2022Set HE2171 mark
    Q.What is the reason for origin of Displacement current?

    ›Reveal solutionSolution

    Displacement current arises from a changing electric field, and was introduced by Maxwell to make Ampere's law consistent for circuits with capacitors.

    Maxwell noticed that Ampere's circuital law, $\oint \vec{B}\cdot d\vec{l} = \mu_0 I$, gave inconsistent results for a charging capacitor: for an Amperian loop drawn as a surface passing between the capacitor plates (where no conduction current flows), the law would predict zero magnetic field, contradicting the case of a surface cutting the connecting wire. To resolve this, Maxwell proposed that a time-varying electric field between the plates itself acts as a source of magnetic field, just like a current does, and defined the displacement current $I_d = \varepsilon_0 \dfrac{d\Phi_E}{dt}$ (proportional …

    🔒 Start your 14-day free trial to see the full solution →
11. CBSE 2020Set 55/1/11 mark
    Q.Write the mathematical form of Ampere-Maxwell circuital law.

    ›Reveal solutionSolution

    Ampere-Maxwell law generalizes Ampere's law by adding Maxwell's displacement current term; it states that magnetic circulation equals the sum of conduction and displacement currents: $\oint \vec{B} \cdot d\vec{l} = \mu_0 \left( I_{\text{enc}} + \epsilon_0 \frac{d\Phi_E}{dt} \right)$.

    Why Maxwell had to fix Ampere's law

    Ampere's original circuital law worked beautifully for steady currents: the line integral of the magnetic field around a closed loop equals $\mu_0$ times the current threading through. But it failed spectacularly when currents changed with time, particularly in situations like a charging capacitor where current flows in the wires but no charge physically crosses the gap between the plates.

    Maxwell realized the flaw: a changing electric field between the capacitor plates should contribute to the magnetic field just as a real current does. He introduced the displacement current — not a flow of charge, but a changing electric flux that has the same magnetic effect. This insight unified electromagnetism and predicted electromagnetic waves.

    The mathematical statement

    The Ampere-Maxwell circuital law can be written in two equivalent forms:

    Integral form:

    $\oint_C \vec{B} \cdot d\vec{l} = \mu_0 \left( I_{\text{enc}} + \epsilon_0 \frac{d\Phi_E}{dt} \right)$

    where:

    • $\oint_C \vec{B} \cdot d\vec{l}$ is the circulation of magnetic field around closed path $C$
    • $I_{\text{enc}}$ is the conduction current passing through any surface bounded by $C$
    • $\epsilon_0 \frac{d\Phi_E}{dt}$ is the displacement current, with $\Phi_E = \int \vec{E} \cdot d\vec{A}$ being the electric flux

    Differential form:

    $\nabla \times \vec{B} = \mu_0 \vec{J} + \mu_0 \epsilon_0 \frac{\partial \vec{E}}{\partial t}$

    where:

    • $\nabla \times \vec{B}$ is the curl of the magnetic field …

    🔒 Start your 14-day free trial to see the full solution →
12. CBSE 2020Set 55/2/11 markMCQ
    Q.Displacement current exists only when (A) electric field is changing. (B) magnetic field is changing. (C) electric field is not changing. (D) magnetic field is not changing.

    ›Reveal solutionSolution

    Displacement current arises from a changing electric field, not a changing magnetic field. The correct option is (A).

    Concept and Intuition

    The idea of displacement current was introduced by James Clerk Maxwell to fix a logical gap in Ampère’s law. Ampère’s law originally said that a magnetic field is produced by a conduction current (moving charges). But consider a charging capacitor: between the plates, no charges flow, yet a magnetic field is still observed there. Something must be “acting” like a current in that gap.

    Maxwell realised that what changes between the plates is the electric field — it builds up as charge accumulates. He proposed that a changing electric field itself generates a magnetic field, exactly as a current would. He called this effect displacement current. So displacement current exists only when the electric field is changing with time.

    Watch out

    A common mistake is to think displacement current relates to a changing magnetic field — that’s electromagnetic induction (Faraday’s law), not displacement current. The two are symmetric but distinct.

    Step-by-Step Reasoning

    1. Recall the definition of displacement current

       Displacement current density is given by $\vec{J}_d = \epsilon_0 \frac{\partial \vec{E}}{\partial t}$.

       The total displacement current through a surface is $I_d = \epsilon_0 \frac{d\Phi_E}{dt}$, where $\Phi_E$ is the electric flux.

       Both expressions contain a time derivative of the electric field — so if $\vec{E}$ is constant, $\frac{\partial \vec{E}}{\partial t} = 0$ and displacement current is zero.

    2. Examine each option

       • (A) electric field is changing → $\frac{\partial \vec{E}}{\partial t} \neq 0$ → displacement current exists. …

    🔒 Start your 14-day free trial to see the full solution →