Equivalent conductances of sodium acetate, sodium chloride and hydrochloric acid at infinite dilution are 224,

Question of 115

Q. Equivalent conductances of sodium acetate, sodium chloride and hydrochloric acid at infinite dilution are 224, 38.2, 203 ohm^-1 cm^2 eqv^-1 respectively at 298K. So the (lambda)0 CH3COOH is:

(a) 288.5 ohm^-1 cm^2 eqv.^-1

(b) 288.8 ohm^-1 cm^2 eqv.^-1

(d) 59.2 ohm^-1 cm^2 eqv.^-1

Odisha ChseOdisha CHSE +2 Science Board Exam 2025MCQ· 1mImportance★★★★★

0% · 0/115 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Molar Conductivity

From Resistance to Conductance: Flipping the Idea

You already know resistance ( $R$ ) — it tells you how much a material opposes the flow of current. A high resistance means the wire fights the current; a low resistance means it lets current through easily.

Now flip that thought. Instead of asking "how much does it resist?", ask "how easily does it let current flow?" That's exactly what conductance measures.

Note

Conductance ( $G$ ) is the reciprocal of resistance:

$G = \frac{1}{R}$

Unit: siemens (S) — named after Werner von Siemens. 1 S = 1 A/V (ampere per volt).

If a wire has $R = 10\ \Omega$ , its conductance is $G = 0.1\ \text{S}$ . If $R = 0.5\ \Omega$ , $G = 2\ \text{S}$ — it conducts twice as well.

Ohm's Law in Conductance Form

You know $V = IR$ . Rearranging:

I = \frac{V}{R} = G V

So current = conductance × voltage. A high-conductance material draws a large current for the same voltage — it's a "good conductor."

Now, Conductivity: The Material's Intrinsic Property

Resistance depends on two things: the material itself (its "resistivity" $\rho$ ) and the geometry (length $L$ , cross-sectional area $A$ ):

R = \rho \frac{L}{A}

Conductance also depends on geometry. A thicker wire (larger $A$ ) or a shorter wire (smaller $L$ ) has higher conductance. To isolate the material's inherent ability to conduct, we define conductivity ( $\sigma$ ):

\sigma = \frac{1}{\rho}

Conductivity is the reciprocal of resistivity. It tells you how well the material itself conducts, independent of shape and size.

Unit: siemens per metre (S/m).
High $\sigma$ → good conductor (copper: $\approx 5.8 \times 10^7\ \text{S/m}$ ).
Low $\sigma$ → poor conductor / insulator (glass: $\approx 10^{-12}\ \text{S/m}$ ).

Watch out

Don't confuse conductance (property of a specific object, depends on geometry) with conductivity (property of the material, independent of geometry). A short thick copper wire has high conductance; a long thin copper wire has lower conductance — but both have the same conductivity.

The Big Picture in One Table

Quantity	Symbol	Definition	Depends on	Unit
Resistance	$R$	$V/I$	Material + geometry	$\Omega$
Resistivity	$\rho$	$R A / L$	Material only	$\Omega \cdot \text{m}$
Conductance	$G$	$1/R$	Material + geometry	S
Conductivity	$\sigma$	$1/\rho$	Material only	S/m

Intuitive Analogy

Think of a water pipe:

Resistance = how hard it is to push water through (narrow, long pipe).
Conductance = how easily water flows (wide, short pipe). …

Why this formula?

Conductance and Conductivity: Why the Formulas Hold

Let's build this from first principles — understanding the why before the what.

1. The Core Idea: How Easily Does Current Flow?

Think of a conductor (like a copper wire). When you apply a voltage across it, electrons drift through the material. Two questions arise:

How much current flows for a given voltage? → This is conductance ( $G$ ).
How well does the material itself allow current? → This is conductivity ( $\sigma$ ).

The key distinction: Conductance depends on the size and shape of the object. Conductivity is an intrinsic property of the material.

2. Ohm's Law in Terms of Conductance

You know Ohm's law:

V = IR

But we can rewrite it as:

I = \frac{V}{R}

Define conductance $G$ as the reciprocal of resistance:

G = \frac{1}{R}

So:

I = G V

Why this makes sense:

A larger $G$ means more current for the same voltage — the conductor "conducts" better.
$G$ has units of siemens (S) = $\text{A/V}$ .

3. From Resistance to Conductivity: The Geometry Factor

Resistance of a uniform conductor depends on:

Length $L$ (longer → more resistance)
Cross-sectional area $A$ (thicker → less resistance)
Material property $\rho$ (resistivity)

The formula:

R = \rho \frac{L}{A}

Now, conductivity $\sigma$ is the reciprocal of resistivity:

\sigma = \frac{1}{\rho}

So:

R = \frac{1}{\sigma} \cdot \frac{L}{A}

Why this form?

If you double the length, electrons have to travel twice as far, colliding more → resistance doubles.
If you double the area, there's twice as many "lanes" for electrons → resistance halves.

4. The Key Formula: Conductance in Terms of Conductivity

Since $G = 1/R$ , we get:

G = \sigma \frac{A}{L}

This is the central relationship. Let's see why it holds:

$\sigma$ tells you how well the material conducts (intrinsic).
$A/L$ tells you how the geometry amplifies or reduces that.

Intuition:

A fat, short wire ( $A$ large, $L$ small) has high conductance.
A thin, long wire ( $A$ small, $L$ large) has low conductance.
A material with high $\sigma$ (like copper) gives higher $G$ than one with low $\sigma$ (like iron), for the same shape.

5. Microscopic Derivation (Why $\sigma$ Exists)

At the microscopic level, conductivity arises from electron motion:

\sigma = n e \mu

Where:

$n$ = number of free electrons per unit volume
$e$ = electron charge …