Q.For a binomial distribution with n = 5 and p = 0.4, list the complete probability distribution, and verify that the mean and variance obtained by direct summation match the shortcut formulas np and npq.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Binomial Distribution
Binomial Distribution: From Intuition to Precision
Imagine you flip a fair coin 10 times. You want to know the probability of getting exactly 6 heads. This is the kind of question the binomial distribution answers — it models the number of "successes" in a fixed number of independent trials, where each trial has only two outcomes.
The Intuition
Think of a single trial. You roll a die and call "getting a 4" a success. That's one trial. Now roll the die 5 times. The number of times you get a 4 could be 0, 1, 2, 3, 4, or 5. Each roll is independent — the result of one roll doesn't affect the next. The probability of success (getting a 4) stays the same every time: p=61.
The binomial distribution tells you exactly how likely each possible count of successes is, given:
- a fixed number of trials n,
- a constant success probability p per trial,
- independent trials.
The Key Conditions
For a situation to be modelled by a binomial distribution, all four must hold:
- Fixed number of trials (n). You decide in advance how many times you'll repeat the experiment.
- Two outcomes per trial — "success" and "failure". These are just labels; success is whatever outcome you're counting.
- Constant probability of success (p) on every trial.
- Independent trials. The outcome of one trial does not influence another.
A common mistake is to apply the binomial distribution when trials are not independent — for example, drawing cards without replacement from a deck. That's a hypergeometric situation, not binomial.
The Precise Statement
Let X be the number of successes in n independent trials, each with success probability p. Then X follows a binomial distribution with parameters n and p, written:
X∼Binomial(n,p)
The probability of getting exactly k successes (where k=0,1,2,…,n) is:
P(X=k)=(kn)pk(1−p)n−k
P(X=k)=(kn)pk(1−p)n−k
Breaking Down the Formula
Three pieces multiply together:
- pk — the probability that the k successes happen. Since each success has probability p, and there are k of them, this factor is p multiplied by itself k times.
- (1−p)n−k — the probability that the remaining n−k trials are failures. Each failure has probability 1−p.
- (kn) — the number of ways to choose which k of the n trials are the successes. The successes could be the first k trials, or the last k, or any arrangement. This binomial coefficient counts all possible arrangements.
The binomial coefficient (kn) is read as "n choose k" and equals k!(n−k)!n!. For example, (25)=2!3!5!=10.
A Worked Example
Problem: A multiple-choice test has 10 questions, each with 4 options. You guess every answer. What is the probability you get exactly 3 correct?
Solution:
- n=10 (10 trials)
- p=41 (probability of guessing correctly on one question)
- k=3 (we want exactly 3 successes)
P(X=3)=(310)(41)3(43)7
Compute (310)=120, so:
P(X=3)=120×641×(43)7
(43)7=163842187, so:
P(X=3)=120×641×163842187=64×16384120×2187
Simplify: 120/64=15/8, so:
P(X=3)=8×1638415×2187=13107232805≈0.2503
So there's about a 25% chance of getting exactly 3 correct by pure guessing.
Mean and Variance
For a binomial distribution, two important summary measures are: …
With n=5 and p=0.4 (q=0.6), every P(x) for x=0 to 5 can be computed from the binomial p.m.f. and then used to find the mean and variance two independent ways. …
With n=5, p=0.4, q=0.6, compute P(x)=(x5)(0.4)x(0.6)5−x for each x:
| x | P(X=x) |
|---|---|
| 0 | (05)(0.4)0(0.6)5=0.07776 |
| 1 | (15)(0.4)1(0.6)4=0.2592 |
| 2 | (25)(0.4)2(0.6)3=0.3456 |
| 3 | (35)(0.4)3(0.6)2=0.2304 |
| 4 | (45)(0.4)4(0.6)1=0.0768 |
| 5 | (55)(0.4)5(0.6)0=0.01024 |
Sum check: 0.07776+0.2592+0.3456+0.2304+0.0768+0.01024=1.0000 — correct.
Mean by direct summation:
∑xP(x)=0(0.07776)+1(0.2592)+2(0.3456)+3(0.2304)+4(0.0768)+5(0.01024)
=0+0.2592+0.6912+0.6912+0.3072+0.0512=2.0
Mean by shortcut formula: np=5×0.4=2.0. The two match exactly.
Variance by direct summation: first find E(X2)=∑x2P(x): …
As a further internal check, note npq = 1.2 is indeed less than np = 2.0, consistent with the general rule that a binomi …
A frequent error in the direct-summation method is computing [E(X)]2 using the rounded mean incorrectly, or confusing E(X2) with [E(X)]2 — remember variance is $ …
- CA Foundation 2026Set jan-20261 markMCQQ.A quality control inspector finds that 20% of light bulbs are defective. If a batch of 5 light bulbs is tested, what is the probability that exactly 1 bulb is defective? (A) 0.4096 (B) 0.8026 (C) 0.2746 (D) 0.1296
›Reveal solutionSolution
P(X=1)=(15)(0.2)1(0.8)4=0.4096.
Step 1 — Set up the binomial model
Each bulb is defective with probability p=0.2 independently; n=5 trials.
Step 2 — Apply the binomial formula for X=1
P(X=1)=(15)p1(1−p)4=5×0.2×(0.8)4.
Step 3 — Compute
(0.8)4=0.4096,P=5×0.2×0.4096=1×0.4096=0.4096. …
- CA Foundation 2025Set may-20251 markMCQQ.What is the probability of making 3 corrected guesses in 5 True-False answer type questions ? (A) 0.3125 (B) 0.4156 (C) 1.3888 (D) 0.5235
›Reveal solutionSolution
Binomial with n=5,p=21: P(X=3)=(35)(21)5=3210=0.3125.
Step 1 — Identify the model
Each of 5 True-False questions is an independent trial with p=21 of a correct guess, so X= number correct is Binomial.
P(X=r)=(rn)pr(1−p)n−r
Step 2 — Substitute n=5, r=3, p=21
P(X=3)=(35)(21)3(21)2=10×(21)5
Step 3 — Evaluate
P(X=3)=3210=0.3125 …
- CA Foundation 2025Set sep-20251 markMCQQ.The Mode of binomial distribution B(7,1/3) is (A) 3 (B) 2 (C) 7/3 (D) 8/3
›Reveal solutionSolution
Mode of B(n,p) = ⌊(n+1)p⌋ when (n+1)p is non-integer; here (8)(1/3)=8/3 → mode = 2.
Step 1 — The mode formula for a binomial
Mode=⌊(n+1)p⌋if (n+1)p is not an integer
Step 2 — Substitute n = 7, p = 1/3
(n+1)p=(7+1)×31=38≈2.67
Since 2.67 is not an integer, take its integer part: mode =2.
Why the other options are wrong: 3 would be ⌈8/3⌉; 7/3 and 8/3 are the mean np=7/3 and the value (n+1)p=8/3 respectively — neither is the mode, which must be a whole-number value the variable can actually take. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.