Q.Choose the correct option : Electrical conductivity of a semi conductor –

Showing the 12 most recent of 15 on this concept.

1. CBSE 2026Set V11 markMCQ
   Q.Which of the following pairs are elemental semiconductors?

   (a) Silicon and aluminium

   (b) Silicon and germanium

   (c) Germanium and cadmium

   (d) Aluminium and cadmium

   ›Reveal solutionSolution

   Option (b) Silicon and germanium. …

   🔒 Start your 14-day free trial to see the full solution →
2. CBSE 2026Set A1 markMCQ
   Q.Semiconductor is damaged by the strong current due to (A) lack of free electrons (B) excess of protons (C) excess of electrons (D) excess of neutrons

   ›Reveal solutionSolution

   A strong current means an excess of moving electrons, whose collisions dump heat that damages the semiconductor's crystal structure.

   Unlike a metal, a semiconductor has relatively few free carriers, and its conductivity rises sharply with temperature. When a strong current flows, there is an excess of electrons moving through the material; their frequent collisions with the lattice generate intense Joule heating. This heating liberates still more carriers (thermal runaway), and the temper …

   🔒 Start your 14-day free trial to see the full solution →
3. CBSE 2026Set ANNUAL1 markMCQ
   Q.When a semiconductor is heated, its resistance

   (a) decreases

   (b) increases

   (c) remains unchanged

   (d) is uncertain

   ›Reveal solutionSolution

   A semiconductor's resistance falls with rising temperature, because the number of charge carriers rises sharply (negative temperature coefficient of resistance).

   In a semiconductor, conduction occurs through electrons and holes generated when covalent bonds break due to thermal energy. As temperature increases:

   • More covalent bonds break, generating more electron–hole pairs.
   • The number of free charge carriers (and hence conductivity $\sigma$) increases roughly exponentially with temperature. …

   🔒 Start your 14-day free trial to see the full solution →
4. CBSE 2025Set ANNUAL1 markMCQ
   Q.Which one in the following is a semiconductor-

   (a) Phosphorus

   (b) Aluminium

   (c) Polyaniline

   (d) Copper

   ›Reveal solutionSolution

   Among the four choices, polyaniline is a conducting/semiconducting organic polymer; the others are an insulating-side element, a metal, and a metal.

   Phosphorus (a non-metal element, used as a dopant but not itself classed as a semiconductor here) and copper (a good metallic conductor) and aluminium (a metal, a conductor) are not semiconductors. Polyaniline is a conjugated conducting polymer whose electrical conductivity can be tuned over a wide range (from in …

   🔒 Start your 14-day free trial to see the full solution →
5. CBSE 2025Set ANNUAL1 mark
   Q.The resistivity of semiconductors is between ____________ ohm-m to ____________ ohm-m.

   ›Reveal solutionSolution

   Semiconductors occupy the middle ground between conductors and insulators, with resistivity roughly between $10^{-5}$ and $10^{6}$ ohm-metre.

   Comparing typical resistivity ranges:

   • Conductors (metals): $\rho \sim 10^{-8}$ to $10^{-2}\ \Omega$m
   • Semiconductors: $\rho \sim 10^{-5}$ to $10^{6}\ \Omega$m
   • Insulators: $\rho \sim 10^{11}$ to $10^{19}\ \Omega$m …

   🔒 Start your 14-day free trial to see the full solution →
6. CBSE 2025Set ANNUAL1 mark
   Q.Semi-conductor is a device that obeys Ohm's law. (T/F)

   ›Reveal solutionSolution

   This statement is False — a semiconductor (and semiconductor devices such as diodes) generally do NOT obey Ohm's law; their V-I relationship is non-linear.

   Ohm's law ($V = IR$ with constant $R$) holds for an ohmic conductor whose resistance stays constant regardless of the applied voltage or current direction. A semiconductor's conductivity strongly depends on temperature and carrier concentration, and semiconductor junction devices (like a p-n junction diode) show a markedly non-linear V-I characteristic (near-zero current in reve …

   🔒 Start your 14-day free trial to see the full solution →
7. CBSE 2024Set ANNUAL1 mark
   Q.What happens to the electrical resistance of a semiconductor when its temperature is raised?

   ›Reveal solutionSolution

   Unlike metals, a semiconductor's resistance falls when it is heated, because more charge carriers become available for conduction.

   In a pure (intrinsic) semiconductor at low temperature, very few electrons have enough thermal energy to jump across the energy gap from the valence band to the conduction band, so the number of free charge carriers (electrons and holes) is small and the resistance is relatively high.

   As the temperature is raised, more valence electrons acquire enough thermal energy to break their covalent bonds and jump into the conduction band, creating additional electron–hole pairs. The number of free charge carriers therefore increases rapidly (roughly exponentially) with temperature.

   …

   🔒 Start your 14-day free trial to see the full solution →
8. CBSE 2024Set ANNUAL1 markMCQ
   Q.Example of inorganic semiconductor is -

   (a) Ge

   (b) CdS

   (c) anthracene

   (d) polyaniline

   ›Reveal solutionSolution

   Semiconductors are classed as inorganic (elemental/compound, e.g. Ge, Si, CdS, GaAs) or organic (e.g. anthracene, polyaniline); CdS is the inorganic compound example here.

   Semiconducting materials are broadly grouped as:

   • Elemental inorganic semiconductors: Silicon (Si), Germanium (Ge).
   • Compound inorganic semiconductors: CdS, GaAs, CdSe, InP, etc.
   • Organic semiconductors: anthracene, doped phthalocyanines, polyaniline, etc. …

   🔒 Start your 14-day free trial to see the full solution →
9. CBSE 2023Set 55/1/11 markMCQ
   Q.When an intrinsic semiconductor is doped with a small amount of trivalent impurity, then :

   (a) its resistance increases.

   (b) it becomes a p-type semiconductor.

   (c) there will be more free electrons than holes in the semiconductor.

   (d) dopant atoms become donor atoms.

   ›Reveal solutionSolution

   Doping an intrinsic semiconductor with a trivalent impurity (like boron) creates p-type material, where holes are the majority carriers and resistance decreases — the correct option is (b).

   The Core Idea: What Doping Actually Does

   An intrinsic (pure) semiconductor has equal numbers of electrons and holes — both generated by thermal energy. When you add a trivalent impurity (3 valence electrons, e.g., boron, aluminium, gallium), each impurity atom replaces a silicon atom in the crystal lattice. Silicon has 4 valence electrons; the trivalent atom has only 3. That missing bond creates a hole — a vacancy that can accept an electron.

   This is the key: trivalent impurities are acceptor atoms, not donors. They introduce extra holes into the crystal, making holes the majority carriers. The material becomes p-type (p for positive charge carriers).

   Let’s walk through each option carefully.

   ---

   Step-by-Step Analysis

   1. Option (a): “its resistance increases”

   Doping always adds charge carriers to the semiconductor. In an intrinsic semiconductor, the number of carriers is very small (on the order of $10^{10} \text{ cm}^{-3}$ for silicon at room temperature). Doping with even 1 part per million of a trivalent impurity increases the hole concentration dramatically — to about $10^{16} \text{ cm}^{-3}$ or more.

   Conductivity $\sigma$ is given by:

   $\sigma = q (n \mu_n + p \mu_p)$

   where $q$ is the electronic charge, $n$ and $p$ are electron and hole concentrations, and $\mu_n$, $\mu_p$ are their mobilities. Adding more carriers (holes) increases conductivity, so resistance decreases. Option (a) is false.

   Watch out

   A common mistake is to think that “impurities block current” — but in semiconductors, controlled impurities (dopants) are what make them conduct. Pure silicon is almost an insulator; doped silicon is a useful conductor.

   2. Option (b): “it becomes a p-type semiconductor”

   Exactly. With trivalent doping, holes outnumber electrons. The material is p-type. This is the definition. Option (b) is true.

   3. Option (c): “there will be more free electrons than holes” …

   🔒 Start your 14-day free trial to see the full solution →
10. CBSE 2023Set F1 markMCQ
    Q.The temperature coefficient of a semi-conductor is (A) positive (B) Negative (C) Zero (D) Infinity

    ›Reveal solutionSolution

    For semiconductors, resistance decreases with rising temperature → negative temperature coefficient of resistance.

    In a semiconductor, raising the temperature releases more charge carriers (electrons and holes) by breaking covalent bonds. This large increase in carrier concentration outweighs the increased scattering, so the resistivity (and resistance) decreases as temperature increases. S …

    🔒 Start your 14-day free trial to see the full solution →
11. CBSE 2023Set ANNUAL1 markMCQ
    Q.As temperature increases the resistance of a semiconductor

    (1) increases

    (2) decreases

    (3) remains constant

    (4) none of these

    ›Reveal solutionSolution

    A semiconductor has a NEGATIVE temperature coefficient of resistance — its resistance falls as temperature rises.

    In a semiconductor, raising the temperature breaks more covalent bonds, generating more free electrons and holes (charge carriers). Since conductivity depends on the number of available carriers, more ca …

    🔒 Start your 14-day free trial to see the full solution →
12. CBSE 2023Set ANNUAL1 mark
    Q.What is the effect of rise in temperature on the conductivity of a semiconductor?

    ›Reveal solutionSolution

    A rise in temperature breaks more covalent bonds in the semiconductor, generating additional free electrons and holes, which raises conductivity.

    As temperature increases, thermal energy breaks more covalent bonds, creating more electron-hole pairs. Since conductivity is proportional to the number of free charge carriers, this INCREASES the conductivity of the semiconductor (equivalently, its resistance decreases) — the opposite of the …

    🔒 Start your 14-day free trial to see the full solution →