Q.Write the values of f at −4, 1, −2, 7, 0 if
[!FORMULA]
f(x)=⎩⎨⎧−x+4x+4x2−xx−x20if −∞<x≤−3if −3<x<−2if −2≤x<1if 1≤x<7otherwise
Concept understanding — Types of Functions
Definition. A relation f⊆A×B is a function f:A→B if (i) every a∈A has some image b∈B with (a,b)∈f, and (ii) that image is unique: (a,b),(a,c)∈f⇒b=c. Then f(a)=b; b is the image of a, a is a pre-image of b. The range {b:(a,b)∈f for some a} is always ⊆ co-domain B. Only the domain side is required to be fully, uniquely covered -- how many pre-images a co-domain point has, or whether it has any, are separate questions (injectivity/surjectivity below).
Representing a function: tabularly (a list of argument/value pairs), graphically (plot with the Vertical Line Test: a curve is a function's graph iff every vertical line meets it at exactly one point), or analytically (a formula, whose natural domain is wherever that formula is actually defined -- found by excluding zero denominators, requiring even-root radicands ≥0, etc., often via a sign-chart over intervals cut out by the critical points). Functions may also be piecewise (different formula on different sub-intervals).
Named elementary functions: identity (f(x)=x), constant (and the zero function as its special case), modulus ∣x∣, signum x/∣x∣ (with 0↦0), floor ⌊x⌋ (always rounds down, even for negatives) and ceiling ⌈x⌉ (always rounds up) -- the last two are "step functions".
One-to-one, onto, bijective. f is one-to-one (injective) if f(x)=f(y)⇒x=y; onto (surjective) if every b∈B has at least one pre-image (range = co-domain); bijective if both. A non-onto function is called into. Only the domain/rule affects injectivity; the stated co-domain can flip ontoness even with the same rule. For finite A,B with n(A)=m, n(B)=n: one-to-one needs m≤n; onto needs m≥n; a bijection exists iff m=n -- and when m=n, one-to-one ⟺ onto automatically, making "injective-not-surjective" or "surjective-not-injective" impossible between equal-sized finite sets. The Horizontal Line Test is the graphical mirror: one-to-one iff every horizontal line through a range value meets the curve exactly once; onto (its stated co-domain) iff every horizontal line through a co-domain value meets it at least once.
Algebra of (real-valued) functions. For f,g on a common domain: (f+g)(x)=f(x)+g(x), similarly f−g, fg, f/g (g=0), cf, −f -- these satisfy associativity, commutativity of +, a zero-function identity, and distributivity f(g+h)=fg+fh.
Special function families: polynomial, linear (ax+b), exponential (ax), logarithmic (logax, the inverse of exponential), rational (p(x)/q(x)), reciprocal (1/f(x)). Odd (f(−x)=−f(x)) vs. even (f(−x)=f(x)): sum of odds is odd, sum of evens is even, product of two odds or two evens is even, product of an odd and an even is odd, and the zero function is the only function both odd and even -- "not odd" does not imply "even".
Identify which piece each input falls into (careful with the boundary ≤/<), then substitute.
f(−4)=8, f(1)=0, f(−2)=6, f(7)=0, f(0)=0.
Step 1. x=−4: since −4≤−3, use f(x)=−x+4: f(−4)=−(−4)+4=4+4=8.
Step 2. x=1: since 1≤x<7 includes x=1, use f(x)=x−x2: f(1)=1−1=0.
Step 3. x=−2: since −2≤x<1 includes x=−2, use f(x)=x2−x: f(−2)=4−(−2)=6.
Step 4. x=7: none of the first four pieces include x=7 (the fourth piece is 1≤x<7, which excludes 7), so it falls to "otherwise": f(7)=0.
Step 5. x=0: since −2≤x<1 includes x=0, use f(x)=x2−x: f(0)=0−0=0.
f(−4)=8,f(1)=0,f(−2)=6,f(7)=0,f(0)=0.
Locate each input in its piecewise interval (checking endpoint inclusion carefully), then evaluate
- Using x−x2 instead of −x+4 near boundary x=−3, or missing that x=7 falls outside ALL four named pieces (the fourth stops just short of 7).
- CBSE 2026Set ANNUAL1 markMCQQ.If the function f:[−3,3]→S defined by f(x)=x2 is onto, then S is:(a) [−3,3](b) [−9,9](c) [0,9](d) R
›Reveal solutionSolution
Since x2≥0 always and its maximum on [−3,3] is 9 (at x=±3), the range is [0,9], so S=[0,9] for f to be onto.
For f:[−3,3]→S to be onto, S must equal the range of f.
f(x)=x2 is minimum at x=0, giving f(0)=0, and increases as ∣x∣ increases, reaching its maximum at the endpoints x=±3: f(±3)=9.
So as x ranges over [−3,3], x2 takes every value in [0,9] continuously (by the Intermediate Value Theorem, since f is continuous).
Hence the range is [0,9], and for f to be onto, S=[0,9].
✓Final answerThe correct option is (c) [0,9].
- CBSE 2025Set ANNUAL1 markMCQQ.The inverse function of y=logex is:(a) y=ex(b) y=logex(c) y=e−x(d) y=−logex
›Reveal solutionSolution
The natural logarithm and the natural exponential function are inverses of each other by definition.
If y=logex, then by definition of logarithm, x=ey. Swapping the roles of x and y to write the inverse function explicitly, the inverse of y=logex is y=ex. (Check: loge(ex)=x and elogex=x, confirming they undo each other.)
✓Final answerThe correct option is (a) y=ex.
- CBSE 2024Set ANNUAL1 markMCQQ.If the function f:[−3,3]→S defined by f(x)=x2 is onto, then S is:(a) [−3,3](b) [−9,9](c) [0,9](d) R
›Reveal solutionSolution
Since f is onto, S must be the exact range of f(x)=x2 on [−3,3], which is [0,9].
For x∈[−3,3], x2 ranges from a minimum of 0 (at x=0) to a maximum of 9 (at x=±3), taking every value in between continuously.
So the range of f is [0,9]. Since f is onto S, S must equal this range exactly.
✓Final answerS=[0,9] — option (c).
- CBSE 2024Set ANNUAL1 markMCQQ.From the following the one which is an odd function, is :(a) 2x3−3(b) 3x4−3x2+1(c) 7x2−11(d) 2x3+3x4+x2+4
›Reveal solutionSolution
A function is odd if f(−x)=−f(x); option (a), based on x3, is the intended odd function.
Odd-function test: f(−x)=−f(x). An odd polynomial contains only odd powers of x.
- (a) f(x)=2x3−3: f(−x)=−2x3−3. The 2x3 term flips sign (odd behaviour); only the constant spoils perfect oddness. It is the only option resting on an odd power.
- (b) 3x4−3x2+1: all even powers ⇒ even function, f(−x)=f(x).
- (c) 7x2−11: even powers ⇒ even function.
- (d) 2x3+3x4+x2+4: mix of odd and even powers ⇒ neither.
Because (b), (c) are even and (d) is neither, the examiner's intended "odd function" is (a).
✓Final answerOption (a) 2x3−3 — the only choice based on an odd power of x (intended odd function); the others are even/neither.
- CBSE 2023Set ANNUAL1 markMCQQ.The rule f(x)=x2 is a bijection if the domain and the co-domain are given by:(a) (0,∞),R(b) R,R(c) [0,∞),[0,∞)(d) R,(0,∞)
›Reveal solutionSolution
f(x)=x2 is a bijection precisely when both domain and co-domain are [0,∞).
Check each option by testing one-one and onto:
- (0,∞)→R: values of x2 for x>0 are only positive, so it never hits negative numbers in R — not onto.
- R→R: f(−2)=f(2)=4, so it is not one-one; also never negative, so not onto.
- [0,∞)→[0,∞): for x1,x2≥0, x12=x22⇒x1=x2 (one-one), and every y≥0 has x=y≥0 mapping to it (onto). This is a bijection.
- R→(0,∞): f(0)=0∈/(0,∞), so f is not even into (0,∞) properly defined as claimed, and it also fails one-one as above.
Only [0,∞)→[0,∞) makes f both one-one and onto.
✓Final answerOption (c): domain [0,∞), co-domain [0,∞).
- CBSE 2023Set ANNUAL1 markQ.Fill in the blanks : If f(−x)=−f(x), then f(x) is a ______ function.
›Reveal solutionSolution
The condition f(−x)=−f(x) defines an odd function.
A function is classified by its symmetry:
- If f(−x)=f(x) for all x, the function is even (symmetric about the y-axis), e.g. x2.
- If f(−x)=−f(x) for all x, the function is odd (symmetric about the origin), e.g. x3 or sinx.
Since the given condition is f(−x)=−f(x), the function is odd.
✓Final answerf(x) is an odd function.
- CBSE 2020Set ANNUAL1 markMCQQ.The function f:[0,2π]→[−1,1] defined by f(x)=sinx is:(a) one-to-one(b) onto(c) bijection(d) cannot be defined
›Reveal solutionSolution
f(x)=sinx on [0,2π] hits every value in [−1,1] (onto) but repeats values (not one-to-one).
A function is one-to-one when distinct inputs always give distinct outputs. Here f(0)=sin0=0 and f(π)=sinπ=0: two different inputs, 0 and π, map to the same output 0. So f is NOT one-to-one.
A function is onto when every element of the codomain is actually attained. As x runs continuously from 0 to 2π, sinx rises from 0 to its maximum 1 (at x=π/2), falls to its minimum −1 (at x=3π/2), and returns to 0 — by continuity it passes through every value in between, so every y∈[−1,1] is hit. So f IS onto.
Since it's onto but not one-to-one, it can't be a bijection, and it clearly is a well-defined function, ruling out the other three options.
✓Final answerThe correct option is (b) onto.
- CBSE 2018Set ANNUAL1 markMCQQ.If f:R→R be defined by f(x)={x,x2,x<1x≥1 then f−1(x) is:(a) {x,x,x<1x≥1(b) {x,2x,x≤1x>1(c) {x,x,x<1x≥1(d) {1,x,x<1x≥1
›Reveal solutionSolution
On x<1, f(x)=x is its own inverse; on x≥1, f(x)=x2 inverts to x. Piecing these together gives option (a).
Given f(x)={x,x2,x<1x≥1.
For the branch x<1: as x ranges over (−∞,1), f(x)=x ranges over (−∞,1) too (identity map). So on this range of outputs y<1, the inverse is simply x=y, i.e. f−1(y)=y.
For the branch x≥1: f(x)=x2, which at x=1 gives 1 and increases to ∞ as x→∞, so outputs cover [1,∞). Solving y=x2 for x≥1 gives x=y (positive root, consistent with x≥1).
So f−1(x)={x,x,x<1x≥1, matching option (a).
✓Final answerThe correct option is (a).
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.