Q.Find the points at which the function f given by f(x)=(x−2)4(x+1)3 has
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Derivative Sign Analysis
Derivative Sign Analysis: What the Slope Tells You
Imagine walking along a hilly road — sometimes uphill, sometimes downhill, occasionally flat. The derivative at any point is simply the slope of the road under your feet at that instant.
Derivative sign analysis figures out where a function is increasing, where it is decreasing, and where it has flat spots (critical points) — all from the sign of its derivative.
The Intuition First
If f′(x) is positive, the function is increasing — the graph rises as you move right. If f′(x) is negative, it is decreasing. If f′(x)=0, there is a horizontal tangent — a potential peak, valley, or flat inflection.
The key: a single point tells you little; you look at intervals. If f′(x)>0 for all x in (a,b), the function is strictly increasing on that whole interval. Same logic for negative.
The analysis is local — it describes behaviour on intervals, not isolated points. A zero derivative at a single point doesn't guarantee a max or min; check the sign change across that point.
The Precise Statement
Let f be differentiable on an open interval I. Then:
- If f′(x)>0 for all x in I, then f is strictly increasing on I.
- If f′(x)<0 for all x in I, then f is strictly decreasing on I.
- If f′(x)=0 for all x in I, then f is constant on I.
Points where f′(x)=0 (or where f′ does not exist) are critical points — the candidates for local maxima and minima.
If f′(x)>0 on (a,b)⟹f increasing on (a,b)
If f′(x)<0 on (a,b)⟹f decreasing on (a,b)
How to Perform It (Step-by-Step)
- Find the derivative f′(x).
- Find critical points: solve f′(x)=0 and check where f′(x) is undefined (but f is defined).
- Plot these on a number line — they split the domain into intervals.
- Pick a test point inside each interval and evaluate f′; only the sign matters.
- Record the sign in each interval and interpret: + means increasing, – means decreasing.
A Concrete Example
Take f(x)=x3−3x.
Step 1: f′(x)=3x2−3=3(x−1)(x+1).
Step 2: Critical points: x=−1 and x=1.
Step 3: Intervals: (−∞,−1), (−1,1), (1,∞).
Step 4: Test points:
- x=−2: f′(−2)=3(4−1)=9>0.
- x=0: f′(0)=−3<0.
- x=2: f′(2)=9>0.
Step 5: So f increases on (−∞,−1), decreases on (−1,1), increases on (1,∞). Thus x=−1 is a local maximum (sign changes + to –), and x=1 is a local minimum (– to +). …
Idea: Differentiate, factor, and use the sign change of f′ (first derivative test) at each critical point.
f(x)=(x−2)4(x+1)3. By the product rule,
f′(x)=4(x−2)3(x+1)3+3(x−2)4(x+1)2.
Factor out (x−2)3(x+1)2:
f′(x)=(x−2)3(x+1)2[4(x+1)+3(x−2)]=(x−2)3(x+1)2(7x−2).
Critical points: x=−1, x=72, x=2.
Sign of f′ (note (x+1)2≥0 never changes sign):
- x<−1: (−)(+)(−)=+
- −1<x<72: (−)(+)(−)=+
- 72<x<2: (−)(+)(+)=−
- x>2: (+)(+)(+)=+
Classify: …
With f′(x)=(x−2)3(x+1)2(7x−2), the sign of f′ gives a local maximum at x=72, a local minimum at x=2, and a point of inflexion at x=−1.
The plan
To locate maxima, minima and inflexions we look at where the slope f′(x) is zero and, crucially, how the sign of f′ changes there. Positive-to-negative means a peak (local max); negative-to-positive means a valley (local min); no change means a horizontal point of inflexion.
Step 1 — Differentiate and factor
f(x)=(x−2)4(x+1)3.
Using the product rule,
f′(x)=4(x−2)3(x+1)3+3(x−2)4(x+1)2.
Both terms share (x−2)3(x+1)2, so
f′(x)=(x−2)3(x+1)2[4(x+1)+3(x−2)].
Simplify the bracket: 4x+4+3x−6=7x−2. Hence
f′(x)=(x−2)3(x+1)2(7x−2).
Step 2 — Critical points
Set f′(x)=0:
(x−2)3=0⇒x=2,(x+1)2=0⇒x=−1,7x−2=0⇒x=72.
In increasing order these are x=−1, 72, 2.
Step 3 — Sign chart of f′
The factor (x+1)2 is never negative, so it cannot switch the sign of f′ — it only makes f′ vanish at x=−1. The sign of f′ is therefore controlled by (x−2)3 (same sign as x−2) and (7x−2).
| Interval | (x−2)3 | (x+1)2 | (7x−2) | f′(x) |
|---|---|---|---|---|
| (−∞,−1) | − | + | − | + |
| (−1,72) | − | + | − | + |
| (72,2) | − | + | + | − |
| (2,∞) | + | + | + | + |
Step 4 — Classify each critical point …
Method: Classifying Critical Points Using Root Multiplicity in the First Derivative
This method locates and classifies every local maximum, local minimum, and point of inflexion of a function whose derivative factors into repeated linear factors — very common when the original function is itself a product of powers, like (x−a)m(x−b)n.
Steps
Step 1: Differentiate using the product rule and factor out the common part
For f(x)=(x−p)m(x−q)n, apply the product rule and notice both resulting terms share the factor (x−p)m−1(x−q)n−1 — pull it out to leave a simple linear bracket behind.
f′(x)=(x−p)m−1(x−q)n−1[m(x−q)+n(x−p)]
Step 2: Identify every critical point, keeping track of each factor's multiplicity (exponent)
Set each factor of f′(x) to zero. Note the exponent on each repeated factor — this exponent is the key to classification in the next step.
Step 3: Build a sign chart, using the multiplicity rule to shortcut the sign of each factor …
Common Mistakes
Mistake 1: Assuming every zero of f′(x) is automatically a local maximum or minimum
Why it's wrong: a root of f′ coming from a factor raised to an even power (like (x+1)2 here) makes f′=0 at that point but does NOT change the sign of f′ on either side, so the curve keeps rising (or keeps falling) through it — it's a point of inflexion, not an extremum. Correct approach: always check the sign of f′ on both sides of every critical point before classifying it; the exponent's parity is a fast shortcut, but only once you've confirmed why it works with the sign chart.
Mistake 2: Making an arithmetic slip when combining the two product-rule terms into one bracket …
- TG EAPCET 2022Set eng-2022-07-18-FN1 markMCQQ.Let a function f(x) be continuous in an interval [a,b]. Let δ>0 be a very small real number. Let c∈(a,b) be such that f(c−δ)<f(c) and f(c+δ)<f(c) for every δ>0. Let (f(α−δ)−f(α))(f(α+δ)−f(α))<0 ∀α∈(a,b) and α=c. Then (A) f(x) has a local maximum at c and a local minimum at α (B) f(x) has a local maximum at α and a local minimum at c (C) f(x) has only one local maximum at c (D) f(x) has only one local minimum at c
›Reveal solutionSolution
The conditions describe a function that is strictly higher at c than at any nearby point, and for every other point α the function values on either side straddle f(α) — meaning c is the only local extremum, a maximum. The correct option is (C).
The key idea is to interpret the two given inequalities as precise local behavior tests.
- The first condition says: for every tiny δ>0, we have f(c−δ)<f(c) and f(c+δ)<f(c). That is exactly the definition of a strict local maximum at x=c.
- The second condition says: for every α=c and every δ>0, the product (f(α−δ)−f(α))(f(α+δ)−f(α)) is negative. That means one of the two differences is positive and the other negative — so f(α) is strictly between the values on its left and right for any tiny interval. That is the hallmark of a point that is not a local extremum (it is a point of "strict crossing" or monotonic behavior locally).
Thus the only point where the function can have a local extremum is c, and it is a maximum.
-
Interpret the condition at c
For every δ>0, f(c−δ)<f(c) and f(c+δ)<f(c).
This means that in any sufficiently small neighborhood around c, the value at c is strictly larger than all other values. That is the definition of a strict local maximum at c. No other point can satisfy this because the condition is required to hold for every δ>0, not just small enough ones — but even for arbitrarily small δ, it forces c to be a peak.
-
Interpret the condition at any α=c
For every α∈(a,b) with α=c, and for every δ>0, we have
(f(α−δ)−f(α))(f(α+δ)−f(α))<0.
A product is negative exactly when one factor is positive and the other negative.
So for every tiny δ, either:
- f(α−δ)>f(α) and f(α+δ)<f(α), or
- f(α−δ)<f(α) and f(α+δ)>f(α).
In either case, f(α) is not the largest or smallest in any neighborhood — it is strictly between the left and right values. Hence α cannot be a local maximum or a local minimum.
- Why “for every δ>0” is important …
- TG EAPCET 2022Set eng-2022-07-18-FN1 markMCQQ.If the extreme value of 3x−2x2+1 is k then the set of all real values of x for which kx2+2x+1>0 is (A) (21,1) (B) (−∞,21)∪(1,∞) (C) (−∞,∞) (D) (−∞,817)
›Reveal solutionSolution
The extreme value of the quadratic 3x−2x2+1 is its maximum k=817, and substituting this k into kx2+2x+1>0 yields a quadratic with a negative discriminant and positive leading coefficient, so the inequality holds for all real x; the answer is (−∞,∞).
Concept & Intuition
We first find the extreme value of 3x−2x2+1. Since it’s a quadratic with a negative coefficient on x2, it opens downward, so its extreme is a maximum at the vertex. That maximum value becomes k. Then we plug k into the second quadratic inequality kx2+2x+1>0. The sign of k and the discriminant will tell us whether this quadratic is always positive, never positive, or positive only on an interval.
Step-by-step solution
- Find the extreme value of f(x)=3x−2x2+1 Rewrite in standard form: f(x)=−2x2+3x+1. For a quadratic ax2+bx+c, the vertex (where the extreme occurs) is at x=−2ab. Here a=−2, b=3, so
x=−2(−2)3=43.
The extreme value is
f(43)=−2(43)2+3(43)+1=−2⋅169+49+1=−1618+1636+1616=1634=817.
Since the parabola opens downward, this is the maximum value. Hence k=817.
- Substitute k into the inequality We need to solve
817x2+2x+1>0.
Multiply through by 8 (positive, so inequality direction unchanged):
17x2+16x+8>0.
- Analyze the quadratic 17x2+16x+8
- Leading coefficient 17>0 → parabola opens upward.
- Compute discriminant: Δ=162−4⋅17⋅8=256−544=−288. …
- TG EAPCET 2026Set eng-2026-05-10-AN1 markMCQQ.The number of real roots of the equation e3x−2e2x−ex+2=0 is (A) 0 (B) 1 (C) 2 (D) 3
›Reveal solutionSolution
The equation simplifies to a quadratic in ex after factoring, giving two positive solutions for ex, each yielding one real x; thus there are exactly two real roots.
We start with the equation
e3x−2e2x−ex+2=0.
The key insight is to treat ex as a single variable, say t=ex, where t>0 because the exponential function is always positive. This transforms the equation into a polynomial in t, which is easier to factor and solve. Once we find positive t values, each corresponds to exactly one real x=logt.
- Substitute t=ex: The equation becomes
t3−2t2−t+2=0.
- Factor the cubic: Group terms:
(t3−2t2)−(t−2)=t2(t−2)−1(t−2)=(t−2)(t2−1).
So
(t−2)(t−1)(t+1)=0.
- Find possible t values: The roots are t=2, t=1, and t=−1. Since t=ex>0, we discard t=−1. …
- TG EAPCET 2021Set eng-2021-08-05-AN1 markMCQQ.Let R∗=R−{(2k−1)2π∣k∈I}. The function f:R∗→R is defined as f(x)=tanx−x, then f(x) is (A) an increasing function (B) a decreasing function (C) minimum at x=0 (D) periodic function
›Reveal solutionSolution
The function f(x)=tanx−x is increasing on each interval of its domain, because its derivative f′(x)=sec2x−1=tan2x≥0 and is zero only at isolated points. The correct option is (A).
The key to this problem is to examine monotonicity — whether a function is increasing or decreasing — by looking at its derivative. For a function to be increasing on an interval, its derivative must be non-negative (and not identically zero on any subinterval). For it to be decreasing, the derivative must be non-positive. The domain here is all real numbers except odd multiples of 2π, where tanx blows up.
Let’s work through it step by step.
- Find the derivative. We have f(x)=tanx−x. The derivative is
f′(x)=sec2x−1.
Using the identity sec2x=1+tan2x, this simplifies to
f′(x)=tan2x.
-
Analyze the sign of f′(x).
Since tan2x≥0 for every x in the domain (a square is never negative), we have f′(x)≥0 everywhere. The derivative is zero exactly when tanx=0, i.e., at x=nπ for integers n. These are isolated points — not whole intervals.
-
What does this tell us about monotonicity?
A function whose derivative is non-negative and zero only at isolated points is strictly increasing on each interval of its domain. Here, the domain R∗ is broken into intervals between consecutive vertical asymptotes:
…,(−23π,−2π),(−2π,2π),(2π,23π),…
On each such interval, f′(x)≥0 and f′(x)=0 only at the single point x=0 (in the middle interval) or at other isolated nπ values. So f is increasing on each interval. …
- TG EAPCET 2021Set eng-2021-08-05-AN1 markMCQQ.f(x)=ax2−bx−a is a quadratic expression. If K is the least real number such that f(x)≤K ∀x∈R, then (A) K=0 (B) K<−2 (C) K>0 (D) −1<K<0
›Reveal solutionSolution
The quadratic opens downward only if a<0, and its maximum value is K=−4ab2+4a2. Since a<0, this expression is always positive, so K>0. The correct option is (C).
The key idea here is that a quadratic expression f(x)=ax2−bx−a can have a maximum (and therefore a least upper bound K) only if it opens downward — that is, if a<0. If a>0, the parabola opens upward and f(x)→∞, so no such finite K exists. The problem implicitly assumes a is such that K exists, so we must have a<0.
The maximum value of a quadratic px2+qx+r (with p<0) occurs at x=−2pq, and that maximum is −4pD, where D=q2−4pr is the discriminant. Here p=a, q=−b, r=−a.
Let’s work through it.
-
Identify the coefficients.
f(x)=ax2−bx−a gives p=a, q=−b, r=−a.
-
Find the vertex (point of maximum).
The x-coordinate of the vertex is x=−2pq=−2a(−b)=2ab.
-
Compute the maximum value K.
Substitute x=2ab into f(x):
f(2ab)=a(2ab)2−b(2ab)−a=a⋅4a2b2−2ab2−a=4ab2−2ab2−a=−4ab2−a.
So
K=−4ab2−a.
- Rewrite K in a more revealing form. Combine the terms over a common denominator 4a: K=−4ab2−a=−4ab2+4a2. …
-
- TG EAPCET 2021Set eng-2021-08-05-FN1 markMCQQ.If α+3x2+2−αy2=1 represents a hyperbola, then α lies in (A) (−3,2) (B) (−3,∞) (C) (−∞,−2) (D) (−∞,−3)∪(2,∞)
›Reveal solutionSolution
For the given equation to represent a hyperbola, the denominators of the x2 and y2 terms must have opposite signs. This leads to the condition (α+3)(2−α)<0, which simplifies to (α+3)(α−2)>0, yielding α∈(−∞,−3)∪(2,∞).
The equation of a conic section is given as α+3x2+2−αy2=1. We need to determine the range of α for which this equation represents a hyperbola.
Concept and Intuition
The standard form of a hyperbola centered at the origin is either a2x2−b2y2=1 or b2y2−a2x2=1.
In both cases, one of the squared terms (x2 or y2) has a positive coefficient, and the other has a negative coefficient. This means that the denominators under x2 and y2 must have opposite signs.
If the denominators had the same sign:
- If both were positive, it would be an ellipse (or a circle if they were equal).
- If both were negative, the sum of two non-positive terms would be 1, which is impossible for real x,y.
Therefore, for the given equation to represent a hyperbola, the expressions (α+3) and (2−α) must have opposite signs.
Step-by-Step Solution
-
Identify the denominators:
The given equation is α+3x2+2−αy2=1.
The denominators are A=α+3 and B=2−α.
-
Apply the hyperbola condition:
For the equation to represent a hyperbola, the denominators A and B must have opposite signs. This means their product must be negative.
For Ax2+By2=1 to be a hyperbola, AB<0.
So, we must have (α+3)(2−α)<0.
-
Solve the inequality:
We have the inequality (α+3)(2−α)<0.
To make the leading coefficient of α positive in both factors, we can multiply the second factor (2−α) by −1 and reverse the inequality sign:
(α+3)(−1)(α−2)<0
−(α+3)(α−2)<0
Multiplying by −1 and reversing the inequality sign again:
(α+3)(α−2)>0
-
Find the critical points and intervals:
The critical points where the expression (α+3)(α−2) equals zero are α=−3 and α=2.
These points divide the number line into three intervals: (−∞,−3), (−3,2), and (2,∞).
We test a value of α from each interval:
- Interval 1: α<−3 (e.g., α=−4) (α+3)(α−2)=(−4+3)(−4−2)=(−1)(−6)=6. Since 6>0, this interval satisfies the inequality. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.