Q.Find dxdy in the following: x=sint,y=cos2t
Concept understanding — Implicit Differentiation
Implicit Differentiation
When y isn't alone
You can differentiate y=x2+3x term by term because y is written explicitly in terms of x. But an equation like x2+y2=25, or x3+y3=6xy, does not give y by itself — solving for y is messy or downright impossible.
Implicit differentiation finds dxdy without isolating y: treat y as an unknown function of x, differentiate the whole equation as it stands, then solve for dxdy.
The one key move: y is really y(x)
Wherever y appears, picture y(x) hiding inside. Differentiating a y-term therefore needs the chain rule, which tacks on a factor of dxdy:
dxd(y2)=2ydxdy.
That extra dxdy on every y-term is the whole trick.
The procedure
- Differentiate both sides with respect to x, treating y as y(x).
- Each time you differentiate a y-term, multiply by dxdy (chain rule); use the product rule on mixed terms such as xy.
- Gather all dxdy terms on one side, everything else on the other.
- Factor out dxdy and divide.
Worked example
For x2+y2=25:
2x+2ydxdy=0⇒dxdy=−yx.
The answer naturally contains both x and y — that is normal here. To get the slope at a point on the curve, substitute the coordinates after differentiating; there is no need to solve for y first.
The classic mistake is dropping the dxdy factor — writing dxd(y2)=2y treats y as if it were x. If a term contains y and you are differentiating with respect to x, the chain rule always applies.
Implicit differentiation is not a new rule; it is the chain rule used systematically whenever y is tangled up with x.
Implicit differentiation is a named subtopic of the NCERT Class 12 Continuity and Differentiability chapter and shows up regularly in CBSE board 'find dy/dx' questions involving equations like x² + y² = 25 that can't easily be solved for y. Students searching 'implicit differentiation class 12 examples' or preparing this technique for JEE Main will recognize this as simply the chain rule applied systematically to every y-term.
Concept: Parametric Differentiation — when both x and y are given in terms of a third variable t, we use dxdy=dx/dtdy/dt.
First, differentiate each with respect to t:
dtdx=cost,dtdy=−2sin2t
Now apply the chain rule:
dxdy=dx/dtdy/dt=cost−2sin2t
Use the identity sin2t=2sintcost to simplify:
dxdy=cost−2(2sintcost)=−4sint
The derivative is −4sint.
For parametric equations x=sint, y=cos2t, we use dxdy=dx/dtdy/dt to get dxdy=−4sint.
Why parametric differentiation works
When x and y are both given in terms of a third variable t, we cannot directly write y as a function of x — and we don't need to. The chain rule gives us a clean way:
dxdy=dx/dtdy/dt, provided dx/dt=0.
Think of it this way: a small change in t causes a small change in both x and y. The ratio of those changes (as dt→0) is exactly the derivative we want.
Step-by-step solution
1. Differentiate x with respect to t
x=sint
dtdx=cost
2. Differentiate y with respect to t
y=cos2t
Using the chain rule: dtdy=−sin(2t)⋅2=−2sin2t
You can also use the double-angle identity sin2t=2sintcost to rewrite −2sin2t=−4sintcost. This will simplify nicely later.
3. Apply the parametric derivative formula
dxdy=dx/dtdy/dt=cost−2sin2t
4. Simplify using the identity sin2t=2sintcost
dxdy=cost−2(2sintcost)=cost−4sintcost
5. Cancel cost (provided cost=0, i.e., t=2π+nπ)
dxdy=−4sint
A common mistake is to forget the chain rule when differentiating cos2t — the derivative is −2sin2t, not −sin2t. Also, never cancel cost without noting where it is zero; those points correspond to vertical tangents where dx/dt=0.
The derivative is dxdy=−4sint.
Method: Differentiating a Parametric Curve
This method applies whenever a curve is given through a third variable (a parameter — commonly t or θ) instead of y written directly as a function of x.
Steps
Step 1: Recognise the parametric form
If you are given x=f(param) and y=g(param) instead of y=h(x), do not try to eliminate the parameter first — it is often messy or impossible. Differentiate each equation separately with respect to the parameter instead.
Step 2: Differentiate x and y with respect to the parameter
Use the ordinary rules (product rule, chain rule, standard derivatives) to find dθdx (or dtdx) and dθdy (or dtdy).
Step 3: Divide — the parametric-derivative formula
dxdy=dx/dθdy/dθ,dθdx=0.
This is justified by the chain rule: dθdy=dxdy⋅dθdx, so dividing recovers dxdy.
Step 4: Simplify with trigonometric identities where possible
Parametric answers built from sin,cos of the parameter very often simplify with a double-angle or half-angle identity (sin2θ=2sinθcosθ, 1−cosθ=2sin22θ, 1+cosθ=2cos22θ, etc.) — always look for one before leaving the answer as a raw ratio.
Applying to this problem: with x=sint, y=cos2t, the inner derivative of cos2t carries a chain-rule factor of 2 (giving −2sin2t), and the double-angle identity sin2t=2sintcost then cancels the cost in the denominator cleanly, leaving a one-variable answer in t alone.
Common Mistakes
Mistake 1: Dropping the chain-rule factor of 2 on cos2t.
Why it's wrong: dtdcos2t=−2sin2t, not −sin2t — the inner function 2t has derivative 2, which must be multiplied in. Correct approach: always write the chain rule explicitly for a multiple angle before simplifying.
Mistake 2: Cancelling cost without excluding where it vanishes.
Why it's wrong: the simplification cost−2sin2t=−4sint is only valid for cost=0, i.e. t=2π+nπ — those points are exactly where dx/dt=0. Correct approach: state the domain restriction alongside the simplified answer.
Showing the 12 most recent of 17 on this concept.
- TG EAPCET 2025Set eng-2025-05-03-AN1 markMCQQ.If x=sin2θcos3θ, y=sin3θcos2θ, then dxdy= (A) 2cos5θ−cos3θcos2θ2cos5θ+sin3θsin2θ (B) 2cos5θ+cos3θcos2θ2cos5θ−sin3θsin2θ (C) 2cos5θ−sin3θsin2θ2cos5θ+cos3θcos2θ (D) 2cos5θ−cos3θcos2θ2cos5θ−sin3θsin2θ
›Reveal solutionSolution
dxdy=2cos5θ−sin3θsin2θ2cos5θ+cos3θcos2θ.
Differentiate each with respect to θ:
dθdx=2cos2θcos3θ−3sin2θsin3θ,
dθdy=3cos3θcos2θ−2sin3θsin2θ.
Using cos5θ=cos2θcos3θ−sin2θsin3θ, write each derivative around cos5θ:
dθdx=2(cos2θcos3θ−sin2θsin3θ)−sin3θsin2θ=2cos5θ−sin3θsin2θ,
dθdy=2(cos2θcos3θ−sin2θsin3θ)+cos3θcos2θ=2cos5θ+cos3θcos2θ.
Hence
dxdy=dx/dθdy/dθ=2cos5θ−sin3θsin2θ2cos5θ+cos3θcos2θ.
✓Final answerANSWER: C — 2cos5θ−sin3θsin2θ2cos5θ+cos3θcos2θ.
- TG EAPCET 2025Set eng-2025-05-03-FN1 markMCQQ.If x=sin2θcos3θ, y=sin3θcos2θ, then dxdy= (A) 2cos5θ−sin3θsin2θ2cos5θ+cos3θcos2θ (B) 2cos5θ+cos3θcos2θ2cos5θ+sin3θsin2θ (C) 2cos5θ+cos3θcos2θ2cos5θ−sin3θsin2θ (D) 2cos5θ−sin3θsin2θ2cos5θ−cos3θcos2θ
›Reveal solutionSolution
Parametric differentiation gives dxdy=2cos5θ−sin3θsin2θ2cos5θ+cos3θcos2θ. Option (A).
Solution
With x=sin2θcos3θ and y=sin3θcos2θ, differentiate each by the product rule:
dθdx=2cos2θcos3θ−3sin2θsin3θ,dθdy=3cos3θcos2θ−2sin3θsin2θ.
Use cos5θ=cos(3θ+2θ)=cos3θcos2θ−sin3θsin2θ, i.e.
2cos5θ=2cos3θcos2θ−2sin3θsin2θ.
Numerator:
dθdy=(2cos3θcos2θ−2sin3θsin2θ)+cos3θcos2θ=2cos5θ+cos3θcos2θ.
Denominator:
dθdx=(2cos3θcos2θ−2sin3θsin2θ)−sin3θsin2θ=2cos5θ−sin3θsin2θ.
Hence
dxdy=dx/dθdy/dθ=2cos5θ−sin3θsin2θ2cos5θ+cos3θcos2θ.
✓Final answerOption (A): 2cos5θ−sin3θsin2θ2cos5θ+cos3θcos2θ.
- TG EAPCET 2023Set eng-2023-05-12-FN1 markMCQQ.If x=32cos3θ and y=4tan2θ then (dxdy)θ=π/4= (A) 9322 (B) 916 (C) −916 (D) −932
›Reveal solutionSolution
With x=32cos3θ, y=4tan2θ, the parametric derivative reduces to dxdy=92cos5θ−8; at θ=4π this is −932, option (D).
- Differentiate each parameter.
dθdx=32⋅3cos2θ⋅(−sinθ)=−92cos2θsinθ,
dθdy=4⋅2tanθsec2θ=8tanθsec2θ.
- Form the ratio.
dxdy=−92cos2θsinθ8tanθsec2θ.
Since tanθsec2θ=cos3θsinθ,
dxdy=−92cos2θsinθ8cos3θsinθ=92cos5θ−8.
- Evaluate at θ=4π. Here cos4π=21, so cos54π=421. The denominator becomes 92⋅421=49, hence
dxdy=92⋅421−8=9/4−8=−932.
✓Final answerdxdyθ=π/4=−932 — option (D).
ANSWER: D
- TG EAPCET 2023Set eng-2023-05-13-AN1 markMCQQ.If x=cos3θ−sin3θ and y=3cosθ−3sinθ, then the value of dxdy at θ=4π is (A) 9232 (B) 332 (C) 9432 (D) 932
›Reveal solutionSolution
Differentiate x and y separately with respect to the parameter θ and divide. At θ=π/4 this gives dxdy=94⋅2−2/3=9232 — option (A).
The concept first
When both coordinates are given through a parameter, x=x(θ) and y=y(θ), the chain rule gives
dxdy=dx/dθdy/dθ(provided dθdx=0).
Never try to eliminate θ here — with a cube and a cube root in the same problem that would be brutal. Just differentiate each expression in θ and take the quotient at the required value.
The symmetry sin4π=cos4π=21 makes the arithmetic collapse very neatly, so keep the powers of 2 in index form until the end.
Step-by-step
- Differentiate x=cos3θ−sin3θ:
dθdx=3cos2θ(−sinθ)−3sin2θ(cosθ)=−3sinθcosθ(cosθ+sinθ).
- Differentiate y=cos1/3θ−sin1/3θ:
dθdy=31cos−2/3θ(−sinθ)−31sin−2/3θ(cosθ)=−31(sinθcos−2/3θ+cosθsin−2/3θ).
- Put θ=4π, where sinθ=cosθ=2−1/2:
dθdx=−3(21)(22)=−3⋅21⋅2=−232.
dθdy=−31(2⋅2−1/2⋅21/3)=−322−1/2+1/3=−322−1/6.
(Here cos−2/3θ=(2−1/2)−2/3=21/3, and the two terms are identical, hence the factor 2.)
- Divide:
dxdy=−2321/2−322−1/6=32⋅32⋅2−1/6−1/2=942−2/3.
- Tidy the surd. Since 2−2/3=221/3,
dxdy=94⋅221/3=9221/3=9232≈0.28.
✓Final answerdxdyθ=π/4=9232.
ANSWER: A
- TG EAPCET 2024Set eng-2024-05-11-FN1 markMCQQ.A function f:R→R is such that yf(x+y)+cosmy=1+yf(x). If m=2, then f′(x)= (A) −2sin2xy (B) 4x (C) y2sin2xy (D) 2x2
›Reveal solutionSolution
Rearranging the relation gives yf(x+y)−f(x)=y21−cos(mxy); letting y→0 and using 1−cosθ→θ2/2 yields f′(x)=2m2x2=2x2 for m=2 — option (D).
The concept first. The derivative is defined by
f′(x)=limy→0yf(x+y)−f(x)
So whenever a problem hands you a relation connecting f(x+y) and f(x), the strategy is always the same: isolate f(x+y)−f(x), divide by y, and take the limit. The answer must be a function of x alone — y is the vanishing increment, so any option still containing y (like (A) and (C)) cannot be a derivative at all.
Step 1 — Isolate the difference.
yf(x+y)+cos(mxy)=1+yf(x)
⇒yf(x+y)−yf(x)=1−cos(mxy)
⇒y[f(x+y)−f(x)]=1−cos(mxy)
Step 2 — Build the difference quotient. Divide both sides by y2 (valid for y=0):
yf(x+y)−f(x)=y21−cos(mxy)
Step 3 — Take the limit y→0.
Use the standard limit 1−cosθ=2sin2(2θ), so for small θ, 1−cosθ≈2θ2. With θ=mxy:
y21−cos(mxy)=y22sin2(2mxy)=2⋅(2mxysin2mxy)2⋅4m2x2y→02m2x2
Therefore
f′(x)=2m2x2
Step 4 — Put m=2.
f′(x)=222x2=24x2=2x2
Step 5 — Sanity check the options. (A) and (C) still contain y, which is impossible for f′(x). (B) 4x would arise from lim(1−cos(mxy))/y2 done wrongly. Only 2x2 survives.
✓Final answerf′(x)=2x2, so the correct option is (D).
ANSWER: D
- TG EAPCET 2023Set eng-2023-05-13-AN1 markMCQQ.If 2x2+3xy−y2+4x−5y+6=0, then the value of dxdy at (x,y)=(1,−2) is (A) 1 (B) −1 (C) 27 (D) 0
›Reveal solutionSolution
Use implicit differentiation on the given polynomial, then substitute the point (1, –2) to solve for dy/dx. The result is 0, so option (D) is correct.
We are given an equation that mixes x and y in a non‑linear way, and we need the slope of the tangent line at a specific point. Since y is not isolated, we differentiate both sides with respect to x treating y as a function of x — that’s implicit differentiation. The key idea: every time we differentiate a term with y, we multiply by dxdy (chain rule). Then we plug in the coordinates to get a numerical value.
- Differentiate term by term Start with
2x2+3xy−y2+4x−5y+6=0.
Differentiate each term with respect to x:
- dxd(2x2)=4x
- dxd(3xy): use product rule — 3⋅(1⋅y+x⋅dxdy)=3y+3xdxdy
- dxd(−y2)=−2ydxdy
- dxd(4x)=4
- dxd(−5y)=−5dxdy
- dxd(6)=0
- Collect the derivative terms Putting it all together:
4x+3y+3xdxdy−2ydxdy+4−5dxdy=0.
Group the terms containing dxdy:
(3x−2y−5)dxdy+(4x+3y+4)=0.
- Solve for dxdy
(3x−2y−5)dxdy=−(4x+3y+4)
dxdy=−3x−2y−54x+3y+4.
- Substitute the point (x,y)=(1,−2) Numerator: 4(1)+3(−2)+4=4−6+4=2 Denominator: 3(1)−2(−2)−5=3+4−5=2 Hence
dxdy=−22=−1.
Watch outA common mistake is forgetting the minus sign when moving terms, or misapplying the product rule on 3xy. Always check that each y-term gets a dxdy factor.
TipYou can verify by solving the quadratic for y at x=1 and checking the slope of the tangent — but implicit differentiation is faster and avoids messy algebra.
✓Final answerThe correct option is (B).
ANSWER: B
- TG EAPCET 2021Set eng-2021-08-04-AN1 markMCQQ.The equation of the tangent to the curve y=πe−x/π at the point where it crosses Y-axis is (A) πx+2y=2π (B) 2x+πy=π2 (C) x−y+π=0 (D) x+y=π
›Reveal solutionSolution
To find the tangent's equation, first locate the point where the curve crosses the Y-axis, then calculate the curve's derivative at that point to get the tangent's slope. Finally, use the point-slope form. The equation of the tangent is x+y=π.
The equation of a straight line, such as a tangent, can be determined if we know two things: a point it passes through and its slope. For a tangent line to a curve, the point it passes through is the point of tangency on the curve itself. The slope of the tangent at that specific point is given by the value of the derivative of the curve's equation at that point.
Here's how we find the equation of the tangent:
-
Identify the point of tangency:
The problem states that the tangent is at the point where the curve y=πe−x/π crosses the Y-axis. A curve crosses the Y-axis when its x-coordinate is 0.
Substitute x=0 into the curve's equation:
y=πe−0/π
y=πe0
Since e0=1, we have:
y=π×1=π
So, the point of tangency is (0,π).
-
Calculate the slope of the tangent:
The slope of the tangent at any point (x,y) on the curve is given by the derivative dxdy.
The curve's equation is y=πe−x/π.
Differentiate y with respect to x using the chain rule: dxd(ef(x))=ef(x)⋅f′(x).
Here, f(x)=−πx, so f′(x)=−π1.
dxdy=π⋅dxd(e−x/π)
dxdy=π⋅e−x/π⋅(−π1)
dxdy=−e−x/π
Now, evaluate the derivative at the point of tangency, where x=0:
m=dxdyx=0=−e−0/π=−e0=−1
The slope of the tangent at (0,π) is −1.
-
Formulate the equation of the tangent:
We have the point of tangency (x1,y1)=(0,π) and the slope m=−1.
We use the point-slope form of a linear equation:
The equation of a line with slope m passing through (x1,y1) is y−y1=m(x−x1).
Substitute the values:
y−π=−1(x−0)
y−π=−x
-
Rearrange the equation to match the options:
y−π=−x
Add x to both sides:
x+y−π=0
This can also be written as:
x+y=π
Comparing this with the given options:
(A) πx+2y=2π
(B) 2x+πy=π2
(C) x−y+π=0
(D) x+y=π
Our derived equation matches option (D).
✓Final answerThe equation of the tangent to the curve at the point where it crosses the Y-axis is x+y=π.
-
- TG EAPCET 2021Set eng-2021-08-04-AN1 markMCQQ.If (a+bx)exy=x, then dx2d2y= (A) x31(xy′+y2)2 (B) x31(xy′+y2) (C) x31(xy′−y) (D) x31(xy′−y)2
›Reveal solutionSolution
By simplifying the given equation using logarithms and then applying implicit differentiation twice, we find that the second derivative dx2d2y is x31(xy′−y)2.
The problem asks us to find the second derivative dx2d2y from the given implicit relation (a+bx)exy=x. The presence of the exponential term exy suggests that taking the natural logarithm might simplify the expression, making differentiation easier. The options provided involve the term (xy′−y), which is a strong hint that we should try to express our derivatives in terms of this quantity.
Here's a step-by-step approach:
-
Simplify the given equation:
The initial equation is (a+bx)exy=x.
To simplify, first isolate the exponential term:
exy=a+bxx
Now, take the natural logarithm on both sides. This brings the exponent down, making the equation linear in xy:
log(exy)=log(a+bxx)
Using the logarithm property log(A/B)=logA−logB:
xy=logx−log(a+bx)
Multiplying by x gives us an explicit expression for y:
y=x(logx−log(a+bx))
-
Find the first derivative, y′:
We differentiate y=x(logx−log(a+bx)) with respect to x. We will use the product rule, (uv)′=u′v+uv′.
Let u=x, so u′=1.
Let v=logx−log(a+bx). To find v′, we differentiate term by term:
dxd(logx)=x1
dxd(log(a+bx))=a+bx1⋅dxd(a+bx)=a+bxb
So, v′=x1−a+bxb.
Applying the product rule for y′:
y′=(1)⋅(logx−log(a+bx))+x⋅(x1−a+bxb)
y′=(logx−log(a+bx))+1−a+bxbx
From Step 1, we know that logx−log(a+bx)=xy. Substitute this back into the expression for y′:
y′=xy+1−a+bxbx
Combine the constant and fractional terms:
y′=xy+a+bx(a+bx)−bx
y′=xy+a+bxa
-
Express xy′−y:
The options involve the term (xy′−y). Let's rearrange our expression for y′ from Step 2 to find this:
y′−xy=a+bxa
Multiply the entire equation by x:
x(y′−xy)=x(a+bxa)
xy′−y=a+bxax
This is a key intermediate result.
-
Find the second derivative, y′′:
Now we differentiate y′=xy+a+bxa with respect to x to find y′′.
y′′=dxd(xy)+dxd(a+bxa)
For the first term, dxd(xy), use the quotient rule (vu)′=v2u′v−uv′:
dxd(xy)=x2y′⋅x−y⋅1=x2xy′−y
For the second term, dxd(a+bxa), treat it as a(a+bx)−1 and use the chain rule:
dxd(a(a+bx)−1)=a⋅(−1)(a+bx)−2⋅dxd(a+bx)
=−a(a+bx)−2⋅b=−(a+bx)2ab
Combining these, we get y′′:
y′′=x2xy′−y−(a+bx)2ab
-
Substitute and simplify to match the options:
We have the expression for y′′ in terms of xy′−y, x, a, and b. Now, substitute the result from Step 3, xy′−y=a+bxax, into the y′′ expression:
y′′=x2a+bxax−(a+bx)2ab
Simplify the first term:
y′′=x2(a+bx)ax−(a+bx)2ab
y′′=x(a+bx)a−(a+bx)2ab
To combine these fractions, find a common denominator, which is x(a+bx)2:
y′′=x(a+bx)2a(a+bx)−x(a+bx)2abx
y′′=x(a+bx)2a2+abx−abx
y′′=x(a+bx)2a2
Finally, we need to express this result in terms of (xy′−y) to match the given options.
From Step 3, we know xy′−y=a+bxax.
We can rearrange this to isolate a+bxa:
a+bxa=xxy′−y
Now, square both sides:
(a+bxa)2=(xxy′−y)2=x2(xy′−y)2
Observe that our expression for y′′ can be written as:
y′′=x1⋅(a+bx)2a2=x1⋅(a+bxa)2
Substitute the squared expression back into y′′:
y′′=x1⋅x2(xy′−y)2
y′′=x3(xy′−y)2
The final expression matches option (D).
✓Final answerThe second derivative is x31(xy′−y)2.
-
- TG EAPCET 2021Set eng-2021-08-04-FN1 markMCQQ.If x2+xy+y2=k, then dx2d2y= (A) (x+2y)3−6k (B) (x+2y)2−6k (C) (2x+y)2x2+xy+y2 (D) 0
›Reveal solutionSolution
Implicit differentiation twice gives dx2d2y=(x+2y)3−6k — option (A).
Step 1 — First derivative. Differentiate x2+xy+y2=k:
2x+y+xy′+2yy′=0⇒y′=−x+2y2x+y.
Step 2 — Second derivative. With y′=−vu where u=2x+y, v=x+2y (so u′=2+y′, v′=1+2y′):
y′′=−v2u′v−uv′.
Compute the numerator:
u′v−uv′=(2+y′)(x+2y)−(2x+y)(1+2y′)=3y−3xy′.
Substitute y′=−x+2y2x+y:
3y−3x(−x+2y2x+y)=x+2y3y(x+2y)+3x(2x+y)=x+2y6(x2+xy+y2)=x+2y6k.
Step 3 — Assemble.
y′′=−v21⋅x+2y6k=−(x+2y)36k.
(Here x2+xy+y2=k was used.)
✓Final answerdx2d2y=(x+2y)3−6k — option (A).
- TG EAPCET 2025Set eng-2025-05-03-AN1 markMCQQ.If the perpendicular distance from the focus of an ellipse 9x2+b2y2=1 (b<3) to its corresponding directrix is 54, then the slope of the tangent to this ellipse drawn at (23,2b) is (A) −32 (B) 32 (C) 23 (D) −23
›Reveal solutionSolution
e=35,b2=4; the tangent slope at the given point is −32.
For 9x2+b2y2=1 with a=3, the focus-to-directrix distance is
ea−ae=ea(1−e2)=54.
With a=3: 35e2+4e−35=0⇒e=35.
Then e2=95 and b2=a2(1−e2)=9(94)=4, so the ellipse is 9x2+4y2=1.
The evaluation point is (23,2b)=(23,2).
Differentiating implicitly: 92x+2yy′=0⇒y′=−9y4x.
y′=−924⋅23=−9⋅212=−32.
✓Final answerANSWER: A — slope =−32.
- TG EAPCET 2024Set eng-2024-05-11-FN1 markMCQQ.Derivative of (sinx)x with respect to x(sinx) is (A) x(sinx)[xcosx(logx)+sinx](sinx)x−1[(sinx)log(sinx)+xcosx] (B) x(sinx)[xcosx(logx)+sinx](sinx)x[(sinx)(log(sinx))+xcosx] (C) (sinx)x−1[(sinx)log(sinx)+xcosx]xsinx−1[xcosx(logx)+sinx] (D) (sinx)x[(sinx)log(sinx)+xcosx]xsinx[xcosx(logx)+sinx]
›Reveal solutionSolution
Differentiate both u=(sinx)x and v=xsinx logarithmically, then form dv/dxdu/dx. The numerator is (sinx)x−1[sinxlog(sinx)+xcosx] and the denominator carries [xcosxlogx+sinx] — option (A).
The concept first. Two ideas combine.
- Derivative of one function w.r.t. another. By the chain rule, dvdu=dv/dxdu/dx. So we never need to eliminate x; we just differentiate each separately and divide.
- Logarithmic differentiation. Neither the power rule (xn, constant exponent) nor the exponential rule (ax, constant base) applies when both base and exponent depend on x. Taking log first turns the exponent into a product, which the product rule can handle.
Step 1 — Differentiate u=(sinx)x.
logu=xlog(sinx)
Differentiate both sides:
u1dxdu=log(sinx)+x⋅sinxcosx
dxdu=(sinx)x[log(sinx)+sinxxcosx]=(sinx)x−1[sinxlog(sinx)+xcosx]
(the last step just takes one factor of sinx out of the bracket).
Step 2 — Differentiate v=xsinx.
logv=sinxlogx
v1dxdv=cosxlogx+xsinx
dxdv=xsinx[cosxlogx+xsinx]=xsinx⋅x1[xcosxlogx+sinx]
Step 3 — Divide.
dvdu=dv/dxdu/dx=xsinx[xcosxlogx+sinx](sinx)x−1[sinxlog(sinx)+xcosx]
Step 4 — Recognise the shape. The (sinx)-power sits on top (because u is the function being differentiated) and the x-power sits below, with the bracket [sinxlog(sinx)+xcosx] belonging to u and [xcosxlogx+sinx] belonging to v. Options (C) and (D) invert this — they give dv/du, the derivative the wrong way round.
✓Final answerThe derivative is xsinx[xcosxlogx+sinx](sinx)x−1[sinxlog(sinx)+xcosx], so the correct option is (A).
ANSWER: A
- TG EAPCET 2021Set eng-2021-08-06-AN1 markMCQQ.The differential equation for which y2=4a(x+a) (where a is a parameter) is general solution, is (A) y−yy′2=2xy′ (B) y+yy′2=2xy′ (C) y(y+y′)=2xy′ (D) y(y−y′)=2xy′
›Reveal solutionSolution
To find the differential equation, we eliminate the arbitrary parameter a from the given general solution y2=4a(x+a) by differentiating it once. The resulting differential equation is y−yy′2=2xy′.
When we are given a general solution to a differential equation, it contains one or more arbitrary constants (parameters). The process of finding the differential equation involves eliminating these arbitrary constants. The number of times we need to differentiate the given solution is equal to the number of independent arbitrary constants present in it.
In this problem, the general solution is y2=4a(x+a), and a is the single arbitrary parameter. Therefore, we will differentiate the equation once with respect to x to obtain an expression involving a, and then substitute this expression back into the original equation to eliminate a.
Here's the step-by-step derivation:
-
Identify the arbitrary parameter:
The given general solution is y2=4a(x+a).
Here, a is the only arbitrary parameter. Since there is one arbitrary parameter, the differential equation will be of the first order, meaning we will need to differentiate the given equation once with respect to x.
-
Differentiate the equation with respect to x:
We differentiate both sides of y2=4a(x+a) with respect to x. Remember to use the chain rule for y2 and treat a as a constant.
dxd(y2)=dxd(4a(x+a))
2ydxdy=4adxd(x+a)
2yy′=4a(1+0)
2yy′=4a
From this, we can express $a$ in terms of $y$ and $y'$:a=42yy′
a=2yy′
- Eliminate the parameter a: Now, substitute the expression for a back into the original general solution y2=4a(x+a).
y2=4(2yy′)(x+2yy′)
Simplify the equation:y2=2yy′(x+2yy′)
Assuming $y \neq 0$, we can divide both sides by $y$:y=2y′(x+2yy′)
Now, distribute $2y'$ on the right side:y=2xy′+2y′(2yy′)
y=2xy′+y(y′)2
Rearrange the terms to match the given options:y−y(y′)2=2xy′
This can also be written as:y−yy′2=2xy′
- Compare with the options: Comparing our derived differential equation y−yy′2=2xy′ with the given options: (A) y−yy′2=2xy′ (B) y+yy′2=2xy′ (C) y(y+y′)=2xy′ (D) y(y−y′)=2xy′ Our result matches option (A).
✓Final answerThe differential equation for which y2=4a(x+a) is the general solution is (A)y−yy′2=2xy′.
-
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.