Q.Find dxdy, if y=sin−1x+sin−11−x2, 0<x<1
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Inverse Function Relationship
Inverse Function Relationship
Two functions are inverses when each undoes the other. If f sends a to b, then f−1 sends b back to a. Chain them together and you land exactly where you started.
The defining equations
If f−1 is the inverse of f, then
f−1(f(x))=xandf(f−1(y))=y.
The first holds for every x in the domain of f; the second for every y in the range of f. This "round trip returns the input" is what inverse really means.
When does an inverse exist?
Only a one-to-one function (distinct inputs give distinct outputs) can be inverted — otherwise some output would have to map back to two inputs, which no function allows. Graphically, f must pass the horizontal line test.
When a function is not one-to-one over its whole domain (like sinx or x2), we first restrict it to a piece where it is, and the inverse lives on that restricted piece.
The geometry
Because (a,b) lies on f exactly when (b,a) lies on f−1, the graph of f−1 is the mirror image of f across the line y=x. Consequently the domain and range swap: the range of f becomes the domain of f−1.
Why the restriction bites — the trig case
For inverse trigonometric functions the relationship is one-sided. The "outer undo" always works:
sin(sin−1x)=xfor all x∈[−1,1].
But the "inner undo" only works on the principal range:
sin−1(sinx)=xonly if x∈[−2π,2π]. …
Concept: Second Derivative Inverse Cosine — the derivative of sin−11−x2 simplifies using the identity sin−11−x2=cos−1x for 0<x<1.
Step 1: For 0<x<1, note that 1−x2 is positive and in (0,1). The principal value of sin−11−x2 equals cos−1x, because sin(cos−1x)=1−x2.
Step 2: Hence y=sin−1x+cos−1x. …
The key idea is that for 0<x<1, the second term sin−11−x2 simplifies to cos−1x, and since sin−1x+cos−1x=2π, the function is constant. Therefore, dxdy=0.
Why This Works: The Second Derivative Inverse Cosine Insight
When you see a sum of inverse trigonometric functions, your first instinct should be to check if they combine into a constant. For 0<x<1, both sin−1x and cos−1x are defined and their sum is famously 2π. The trick here is recognizing that sin−11−x2 is actually cos−1x in disguise — but only for the given domain.
The domain 0<x<1 is crucial. Outside this interval, the simplification changes sign or becomes undefined. Inside it, 1−x2 is positive and less than 1, so the inverse sine is well-defined and yields an angle in (0,2π).
Let's work through it step by step.
-
Set up the function
We have y=sin−1x+sin−11−x2, with 0<x<1.
-
Simplify the second term
Let θ=sin−11−x2. Then sinθ=1−x2.
Since 0<x<1, we have 0<1−x2<1, so θ lies in (0,2π).
Now, cosθ=1−sin2θ=1−(1−x2)=x2=∣x∣.
Because x>0, ∣x∣=x, so cosθ=x.
Since θ∈(0,2π), we have θ=cos−1x.
Watch outA common mistake is to forget the absolute value. If x were negative, x2=∣x∣=−x, and the simplification would give θ=cos−1(−x)=π−cos−1x, which changes the sum entirely. Always check the domain.
-
Rewrite the function
Substituting back:
y=sin−1x+cos−1x …
Method: Spotting a Constant Before Differentiating
Before diving into the chain rule on a sum of inverse trig functions, check whether the expression itself simplifies to a constant using a standard identity — if it does, the derivative is 0 immediately, with no calculus needed at all.
Steps
Step 1: Look for a recognisable inverse-trig identity in the given expression
Common ones: sin−1x+cos−1x=2π, tan−1x+cot−1x=2π, and conversions like sin−11−x2=cos−1x (valid on a restricted domain).
Step 2: Justify the identity carefully using the given domain …
Common Mistakes
Mistake 1: Differentiating sin−11−x2 directly via the chain rule instead of first checking for a constant.
Why it's wrong: the direct route is far messier (involving a nested square root inside an inverse sine) and much more likely to produce an algebra error than simply recognising the sum is constant. Correct approach: always scan a sum of inverse trig terms for a known identity before reaching for the chain rule.
Mistake 2: Forgetting the absolute value / domain check when converting 1−x2-based inverse sine to inverse cosine. …
- TG EAPCET 2025Set eng-2025-05-02-AN1 markMCQQ.If f:R−{0}→R is defined by 3f(x)+4f(x1)=x2−x then f(3)= (A) 6 (B) 12 (C) 9 (D) 3
›Reveal solutionSolution
The key idea is to replace x by x1 to get a second equation, then solve the two linear equations for f(x). Substituting x=3 gives f(3)=3.
We are given a functional equation that involves both f(x) and f(1/x). The trick is to treat f(x) and f(1/x) as two unknowns, and create a second equation by substituting x1 for x. This gives a system of linear equations in f(x) and f(1/x), which we can solve.
Step 1: Write the given equation.
For any x=0,
3f(x)+4f(x1)=x2−x.
Step 2: Replace x by x1.
Since x=0, x1 is also nonzero, so the equation holds. Substituting gives
3f(x1)+4f(x)=x12−x1.
Simplify the right-hand side:
x12−x1=(2−x1)⋅x=2x−1.
So the second equation is
4f(x)+3f(x1)=2x−1.
Step 3: Solve the system for f(x).
We have:
- 3f(x)+4f(1/x)=x2−x
- 4f(x)+3f(1/x)=2x−1
Treat these as two linear equations in unknowns u=f(x) and v=f(1/x). Multiply equation (1) by 3 and equation (2) by 4 to eliminate v:
9u+12v=3⋅x2−x
16u+12v=4(2x−1)
Subtract the first from the second:
(16u−9u)+(12v−12v)=4(2x−1)−3⋅x2−x
7u=8x−4−x6−3x.
Simplify the right-hand side. Write 8x−4 as x(8x−4)x: …
- TG EAPCET 2025Set eng-2025-05-03-AN1 markMCQQ.Let f:R→R be defined by f(x)=5−∣x∣+sgn(5−x), where sgnx denotes signum function of x. Then f is (A) one-one but not onto (B) onto but not one-one (C) both one-one and onto (D) neither one-one nor onto
›Reveal solutionSolution
The function is not one‑one because it is even (symmetric about the y‑axis) and not onto because its range is a finite set of values, not all real numbers. The correct option is (D).
We need to decide whether f(x)=5−∣x∣+sgn(5−x) is injective (one‑one) and/or surjective (onto). The key is to understand how the absolute value and the signum function interact.
Concept & Intuition
The signum function sgn(t) returns −1 if t<0, 0 if t=0, and 1 if t>0. Here t=5−x. Since 5−x>0 for every real x, the signum is always +1 — except we must check if it can ever be zero or negative. But 5−x is always positive, so sgn(5−x)=1 for all x. That simplifies the function dramatically. Meanwhile, 5−∣x∣ is an even function (depends only on ∣x∣), so f will be even as well. An even function cannot be one‑one unless it is constant on each side, which it isn’t, but it will take the same value at x and −x. For onto, we look at the range: 5−∣x∣ lies in (0,1], so adding 1 gives values in (1,2]. That is far from all real numbers.
Let’s work through carefully.
- Simplify the signum term For any real x, 5−x=e−xlog5>0. Hence sgn(5−x)=1 for every x∈R. So the function becomes
f(x)=5−∣x∣+1.
- Analyze one‑one (injectivity) The term 5−∣x∣ depends only on ∣x∣. Therefore f is an even function: f(−x)=5−∣−x∣+1=5−∣x∣+1=f(x). …
- TG EAPCET 2025Set eng-2025-05-04-AN1 markMCQQ.If A=01312x231, A−1=211−85−16−312y1 then the point (x,y) lies on the curve (A) y=3x2−5x−1 (B) y=log5/2(2x+2−x) (C) y=ex−1ex+1 (D) 3x2y−5xy+12=0
›Reveal solutionSolution
AA−1=I fixes x=1; the point lies on y=log5/2(2x+2−x), since at x=1, 2+2−1=25 and log5/225=1 — option (B).
Writing A−1=21B, the condition AA−1=I gives AB=2I:
- Entry (3,1): 3(1)+x(−8)+1(5)=8−8x=0⇒x=1.
- Entry (1,3): 0(1)+1(2y)+2(1)=2y+2=0⇒y=−1.
Testing option (B) at x=1: 21+2−1=25, so
y=log5/2(21+2−1)=log5/225=1, …
- TG EAPCET 2024Set eng-2024-05-09-FN1 markMCQQ.If the inverse point of the point P(3,3) with respect to the circle x2+y2−4x+4y+4=0 is Q(a,b), then a+5b= (A) 4 (B) 0 (C) −4 (D) 1
›Reveal solutionSolution
The inverse of a point with respect to a circle is found by using the formula Q=center+∣P−C∣2r2(P−C). For P(3,3) and the given circle, we get Q(1,−1), so a+5b=1+5(−1)=−4. The correct option is (C).
Concept and Intuition
The inverse of a point with respect to a circle is a transformation that sends a point P to another point Q on the same ray from the circle’s center C, such that the product of distances from C to P and C to Q equals the square of the radius:
CP⋅CQ=r2.
This is like a “reflection in a circle” — points inside go outside, points outside go inside, and points on the circle stay fixed. The formula is clean:
Q=C+∣P−C∣2r2(P−C).
So we just need the circle’s center and radius, then plug in.
Step-by-step solution
- Rewrite the circle equation in standard form Given:
x2+y2−4x+4y+4=0.
Complete the square for x and y:
(x2−4x)+(y2+4y)=−4.
For x: x2−4x=(x−2)2−4.
For y: y2+4y=(y+2)2−4.
So:
(x−2)2−4+(y+2)2−4=−4⇒(x−2)2+(y+2)2=4.
Thus the circle has center C(2,−2) and radius r=2.
- Find the vector from center to point P P(3,3), so:
CP=(3−2,3−(−2))=(1,5).
Its squared length:
∣CP∣2=12+52=1+25=26.
- Apply the inversion formula The inverse point Q is:
Q=C+∣CP∣2r2CP=(2,−2)+264(1,5).
Simplify 264=132. So:
Q=(2+132,−2+132⋅5)=(2+132,−2+1310). …
- TG EAPCET 2021Set eng-2021-08-04-AN1 markMCQQ.tanh−1(31)+coth−1(2)= (A) log6 (B) log6 (C) −log6 (D) −log6
›Reveal solutionSolution
We express the inverse hyperbolic tangent and cotangent functions in their logarithmic forms and then sum them, simplifying the result using logarithm properties. The final value is log6.
The problem asks us to evaluate the sum of two inverse hyperbolic functions: tanh−1(31)+coth−1(2). To solve this, we need to understand how these inverse hyperbolic functions relate to natural logarithms.
The hyperbolic tangent function is defined as tanhx=coshxsinhx=ex+e−xex−e−x. Its inverse, tanh−1x, gives the value y such that tanhy=x. This inverse function has a specific logarithmic form.
Similarly, the hyperbolic cotangent function is defined as cothx=sinhxcoshx=ex−e−xex+e−x. Its inverse, coth−1x, gives the value y such that cothy=x. This also has a logarithmic form.
The key to solving this problem is to convert each inverse hyperbolic term into its equivalent logarithmic expression and then combine them using standard logarithm properties.
The logarithmic forms for inverse hyperbolic tangent and cotangent are:
tanh−1x=21log(1−x1+x), for ∣x∣<1.
coth−1x=21log(x−1x+1), for ∣x∣>1.
›Proof
Let's derive these formulas.
Derivation for tanh−1x:
Let y=tanh−1x.
Then x=tanhy=ey+e−yey−e−y.
Rearranging, we get:
x(ey+e−y)=ey−e−y
xey+xe−y=ey−e−y
ey(x−1)+e−y(x+1)=0
Multiply the entire equation by ey:
e2y(x−1)+(x+1)=0
e2y(1−x)=x+1
e2y=1−x1+x
Taking the natural logarithm of both sides:
2y=log(1−x1+x)
y=21log(1−x1+x).
This formula is valid for ∣x∣<1, as tanhy is defined for all real y and its range is (−1,1).
Derivation for coth−1x:
Let y=coth−1x.
Then x=cothy=ey−e−yey+e−y.
Rearranging, we get:
x(ey−e−y)=ey+e−y
xey−xe−y=ey+e−y
ey(x−1)−e−y(x+1)=0
Multiply the entire equation by ey:
e2y(x−1)−(x+1)=0
e2y(x−1)=x+1
e2y=x−1x+1
Taking the natural logarithm of both sides:
2y=log(x−1x+1)
y=21log(x−1x+1).
This formula is valid for ∣x∣>1, as cothy is defined for y=0 and its range is (−∞,−1)∪(1,∞).
Now, let's apply these formulas to the given problem.
- Evaluate tanh−1(31): Here, x=31. Since ∣1/3∣<1, we use the formula for tanh−1x:
tanh−1(31)=21log(1−311+31)
Simplify the fraction inside the logarithm: … - TG EAPCET 2021Set eng-2021-08-04-FN1 markMCQQ.If f:R→R is defined as f(x)=23x+3−x,∀x∈R and it satisfies f(x+y)+f(x−y)=af(x)f(y), then a= (A) 2 (B) 1 (C) 4 (D) 8
›Reveal solutionSolution
The functional equation f(x+y)+f(x−y)=af(x)f(y) forces a to be the constant that makes the identity hold for all x,y. Using the given f(x)=23x+3−x, we find a=2.
The function f(x)=23x+3−x is the hyperbolic cosine (base 3), which satisfies an addition formula reminiscent of cosh. The key is to recall that for cosh, we have cosh(x+y)+cosh(x−y)=2coshxcoshy. Here the factor is 2, not 1 or 4. So the problem is really asking: what constant a makes the given equation hold for this specific f?
We can verify directly by plugging in convenient values.
- Choose simple numbers to reduce work. Let x=0 and y be any real number. Then f(0)=230+30=1. The equation becomes
f(0+y)+f(0−y)=af(0)f(y)⇒f(y)+f(−y)=a⋅1⋅f(y).
But f is even: f(−y)=23−y+3y=f(y). So the left side is f(y)+f(y)=2f(y). Hence
2f(y)=af(y).
Since f(y)=0 for all y (it's always positive), we can cancel f(y) and obtain a=2.
- That single step already gives the answer. But to be thorough, check consistency with another pair, say x=y=0: f(0)+f(0)=af(0)f(0) gives 1+1=a⋅1⋅1, so 2=a, same result. …
- TG EAPCET 2021Set eng-2021-08-06-AN1 markMCQQ.If f:R∖{0}→R is such that 2f(x)+f(x1)=4x, and S={x∈R:f(x)=f(−x)}, then the number of elements in S is (A) 0 (B) 1 (C) 2 (D) at least three
›Reveal solutionSolution
The functional equation 2f(x)+f(1/x)=4x is symmetric under x→1/x, which lets us solve for f(x) explicitly. Then f(x)=f(−x) gives a quadratic in x, and the number of real solutions (excluding 0) is the answer: 2.
The key idea is that a functional equation involving both f(x) and f(1/x) can often be solved by swapping x and 1/x to get a second equation. Treating the two as a system lets us eliminate f(1/x) and find f(x) in closed form. Once we have f(x), the condition f(x)=f(−x) becomes an equation we can solve directly.
- Write the given equation and its reciprocal version. We have
2f(x)+f(x1)=4xfor all x=0.
Replace x by x1 (which is allowed since x=0):
2f(x1)+f(x)=x4.
- Solve the system for f(x). Treat these as two linear equations in the unknowns f(x) and f(1/x). Multiply the first equation by 2:
4f(x)+2f(x1)=8x.
Subtract the second equation from this:
(4f(x)+2f(1/x))−(2f(1/x)+f(x))=8x−x4.
The 2f(1/x) terms cancel, leaving
3f(x)=8x−x4.
Hence
f(x)=38x−x4=3x8x2−4.
TipA quick check: plug x=1 gives f(1)=38−4=34, and the original equation becomes 2⋅34+f(1)=4, i.e. 38+34=4, which works. Always verify with a simple value when possible.
- Set up the condition f(x)=f(−x). Substitute the expression:
3x8x2−4=3(−x)8(−x)2−4.
Since (−x)2=x2, the numerator is the same on both sides. The right-hand side becomes
−3x8x2−4=−3x8x2−4.
So the equation is
3x8x2−4=−3x8x2−4.
- Solve the resulting equation. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.