Q.Find the principal value of the following: cos−1(23)
Concept understanding — Principal Value Domain
Principal Value Domain (Principal Branch)
Take sinx=21. It has infinitely many solutions: x=6π,65π,613π,−67π,… — every angle whose sine is 21. So if we want an inverse that returns a single angle for sin−1(0.5), we must first agree on one angle to report. A function is allowed only one output per input, and sinx over all of R is many-to-one — it fails the horizontal line test and cannot be inverted as it stands.
The idea: restrict to one clean interval
For each trigonometric ratio we restrict the angle to a single standard interval on which the function is one-to-one while still covering its entire range exactly once. On that interval the inverse becomes well-defined and single-valued. That interval — the set of angles the inverse is allowed to return — is the principal value branch (also called the principal value domain).
The interval is chosen to be strictly monotonic, to hit every output once, and to sit as close to 0 as possible. For sine that is [−2π,2π], where sin increases from −1 to 1.
The principal value branch of an inverse trig function is the interval of angles it returns — the restricted interval on which the original ratio is one-to-one and onto its range.
| Inverse function | Domain (allowed inputs x) | Principal value branch (angles returned) |
|---|---|---|
| sin−1x | [−1,1] | [−2π,2π] |
| cos−1x | [−1,1] | [0,π] |
| tan−1x | R | (−2π,2π) |
| cot−1x | R | (0,π) |
| sec−1x | (−∞,−1]∪[1,∞) | [0,π]∖{2π} |
| csc−1x | (−∞,−1]∪[1,∞) | [−2π,2π]∖{0} |
Why the intervals differ
They are not arbitrary. cosx is symmetric about 0, so [−2π,2π] would make it two-to-one; instead we use [0,π], where cos decreases from 1 to −1 one-to-one. Each function gets the interval where it is strictly monotonic and sweeps its full range exactly once.
sin−1(sinx)=x holds only when x∈[−2π,2π]. For x=65π, sin−1(sin65π)=sin−1(21)=6π, not 65π.
These principal branches are the standard convention in every textbook, exam, and calculator, so sin−1(0.5) is always 6π. Use them unless a problem explicitly says otherwise.
Principal value branches are formally defined in the NCERT Class 12 Inverse Trigonometric Functions chapter, and the full table of domains and ranges for sin⁻¹, cos⁻¹, tan⁻¹ and the rest is one of the most-memorized reference tables in CBSE board prep. If you're searching 'principal value branch of inverse trigonometric functions table' or 'inverse trig functions important questions class 12', this restricted-interval convention is exactly the concept those searches are pointing to.
The key idea is that the principal value of cos−1 lies in [0,π], and we must pick the angle in that range whose cosine equals 23.
We know cos(6π)=23. Since 6π lies in [0,π], it is the principal value.
No other angle in [0,π] gives the same cosine, so this is unique.
6π
The principal value of cos−1(23) is 6π (or 30∘), because the inverse cosine function returns the unique angle in [0,π] whose cosine equals 23.
The key to solving any inverse trigonometric problem is remembering the range of the principal value branch. For cos−1, the output is always an angle in the closed interval [0,π]. This is not arbitrary — it’s the standard choice that makes the function one-to-one and therefore invertible.
Why [0,π]? Because cosine is strictly decreasing from 1 to −1 as the angle goes from 0 to π. So every possible cosine value (between −1 and 1) corresponds to exactly one angle in that interval. That’s what we mean by “principal value.”
Now, the problem asks for cos−1(23). We need the angle θ in [0,π] such that cosθ=23.
-
Recall the standard cosine values.
From the unit circle or the 30∘-60∘-90∘ triangle, we know:
cos(6π)=23
cos(611π)=23 as well, but 611π is not in [0,π].
-
Check the range.
6π is about 30∘, which lies comfortably inside [0,π]. So it’s a valid principal value.
-
Eliminate other candidates.
Could θ=−6π work? cos(−6π)=23, but −6π is not in [0,π]. So it’s rejected.
Could θ=611π? Same cosine, but 330∘ is outside [0,π]. Rejected.
A common mistake is to give 611π or −6π as the answer, because they also satisfy cosθ=23. But the principal value is unique and must lie in [0,π]. Always check the range first.
- Confirm the value. cos(6π)=23 exactly, and 6π∈[0,π]. So the principal value is 6π.
If you ever forget the range of cos−1, remember: it’s the same as the range of sin−1 shifted by 2π. sin−1 gives angles in [−2π,2π], so cos−1 gives angles in [0,π]. This symmetry helps in exams.
The principal value of cos−1(23) is 6π.
Method: Evaluating cos−1 of a standard positive value
Steps
Step 1: Recall the range [0,π].
Step 2: Match to a standard angle whose cosine is the given value: cos6π=23.
Step 3: Confirm uniqueness.
Check the angle lies in [0,π] (here 6π does). Cosine is one-to-one on [0,π], so exactly one angle in the range shares this cosine.
Common Mistakes
Mistake 1: Giving −6π or 611π.
Why it's wrong: both have cosine 23 but lie outside [0,π]. Correct approach: keep the unique in-range angle 6π.
Mistake 2: Confusing cos−1 with sin−1.
Why it's wrong: sin−123=3π, a different angle. Correct approach: match the value to the correct ratio in the correct range.
Showing the 12 most recent of 20 on this concept.
- TG EAPCET 2026Set eng-2026-05-09-AN1 markMCQQ.If 3i=cisα, α belongs to second quadrant and 3−i=cisβ, β belongs to third quadrant then cisα+cisβ= (A) 3 (B) i (C) −i (D) −3
›Reveal solutionSolution
The cube roots of i and −i are found by De Moivre’s theorem; using the quadrant conditions picks the correct angles, and their sum simplifies to −3.
The problem asks for the sum of two complex numbers, each given in cis form (cis θ=cosθ+isinθ). The cube root of a complex number is not unique — there are three distinct cube roots. The quadrant condition for α and β picks exactly one of those three for each. Once we have the correct angles, adding the two cis values is straightforward trigonometry.
- Find the cube roots of i. Write i in polar form: i=cis2π. By De Moivre’s theorem, the cube roots are
cis(3π/2+2kπ),k=0,1,2.
That gives the three angles:
6π,6π+32π=65π,6π+34π=23π.
The second quadrant contains angles between 2π and π. Among these, only 65π lies there.
Hence α=65π.
- Find the cube roots of −i. Write −i=cis(−2π) or equivalently cis23π. The cube roots are
cis(3−π/2+2kπ),k=0,1,2.
The three angles are:
−6π,−6π+32π=2π,−6π+34π=67π.
The third quadrant covers angles from π to 23π. Only 67π falls there.
Hence β=67π.
Watch outA common mistake is to take the principal cube root (the one with the smallest positive angle) without checking the quadrant condition. That would give α=π/6 and β=−π/6, leading to a wrong sum.
- Compute cisα+cisβ.
cis65π=cos65π+isin65π=−23+i⋅21.
cis67π=cos67π+isin67π=−23+i⋅(−21).
Adding:
(−23−23)+i(21−21)=−3+0i.
TipNotice that the imaginary parts cancel exactly because sin(5π/6)=1/2 and sin(7π/6)=−1/2. The sum is purely real and negative.
✓Final answerThe value is −3, which corresponds to option (D).
- TG EAPCET 2026Set eng-2026-05-10-AN1 markMCQQ.If z=(3−i)2025+(−1−3i)2026 then the point corresponding to z in Argand plane lies in (A) 1st quadrant (B) 2nd quadrant (C) 3rd quadrant (D) 4th quadrant
›Reveal solutionSolution
z=−22025+i22025(1−3): real part <0 and imaginary part <0, so z lies in the third quadrant.
First term (3−i)2025: here 3−i=2(cos(−6π)+isin(−6π)), so
(3−i)2025=22025(cos6−2025π+isin6−2025π).
Reducing the angle: −62025π=−337.5π≡2π(mod2π), so this term =22025i.
Second term (−1−3i)2026: here −1−3i=2(cos34π+isin34π), so
(−1−3i)2026=22026(cos32026⋅4π+isin32026⋅4π).
Reducing: 32026⋅4π=38104π≡34π(mod2π), giving
22026(−21−i23)=−22025−i220253.
Sum:
z=22025i+(−22025−i220253)=−22025+i22025(1−3).
Since Re(z)=−22025<0 and Im(z)=22025(1−3)<0 (because 3>1), the point lies in the third quadrant.
✓Final answerz lies in the 3rd quadrant — option (C).
- TG EAPCET 2026Set eng-2026-05-10-AN1 markMCQQ.If one of the values of −1−3i is a+iβ, α<0 and β>0, then α= (A) −21 (B) −23 (C) −3 (D) −2
›Reveal solutionSolution
−1−3i=2cis34π; its square roots are 2cis32π and 2cis35π. The root with α<0,β>0 gives α=−21.
Write the radicand in polar form. For −1−3i: modulus =1+3=2, and the point (−1,−3) is in the third quadrant, so its argument is 34π (equivalently −32π):
−1−3i=2(cos34π+isin34π).
The square roots have modulus 2 and arguments 21⋅34π=32π and 32π+π=35π:
2(cos32π+isin32π)=2(−21+i23)=−21+i26,
2(cos35π+isin35π)=21−i26.
The root with real part α<0 and imaginary part β>0 is the first one, for which
α=−21.
✓Final answerα=−21 — option (A).
- TG EAPCET 2026Set eng-2026-05-10-FN1 markMCQQ.Number of values of a complex number z satisfying the condition z=z2+iIm(z) is (A) 0 (B) 2 (C) 1 (D) 3
›Reveal solutionSolution
By substituting z=x+iy into the given equation and equating the real and imaginary parts, we find two distinct values for z. The number of such values is 2.
The problem asks us to find the number of complex numbers z that satisfy the given equation z=z2+iIm(z). When an equation involves both the complex number z and its real or imaginary parts, or its conjugate, the most straightforward approach is often to express z in its rectangular form, z=x+iy, where x and y are real numbers. This allows us to separate the equation into two real equations by equating the real and imaginary parts on both sides.
Here's how we solve it:
-
Represent z in rectangular form:
Let z=x+iy, where x and y are real numbers.
-
Express Im(z) in terms of x and y:
If z=x+iy, then its conjugate is z=x−iy.
The imaginary part of z is Im(z)=−y.
-
Substitute these into the given equation:
The given equation is z=z2+iIm(z).
Substitute z=x+iy and Im(z)=−y:
x+iy=(x+iy)2+i(−y)
Expand the term (x+iy)2:
(x+iy)2=x2+2ixy+(iy)2=x2+2ixy−y2.
So the equation becomes:
x+iy=(x2−y2+2ixy)−iy
Group the real and imaginary terms on the right side:
x+iy=(x2−y2)+i(2xy−y)
-
Equate the real and imaginary parts:
For two complex numbers to be equal, their real parts must be equal, and their imaginary parts must be equal.
Equating the real parts:
x=x2−y2(Equation 1)
Equating the imaginary parts:
y=2xy−y(Equation 2)
-
Solve the system of real equations:
Let's start with Equation 2, as it often simplifies nicely:
y=2xy−y
Add y to both sides:
2y=2xy
Move all terms to one side:
2y−2xy=0
Factor out 2y:
2y(1−x)=0
This equation implies that either 2y=0 or 1−x=0.
So, we have two cases:
- Case A: y=0
- Case B: x=1
Let's analyze each case:
Case A: y=0
Substitute y=0 into Equation 1:
x=x2−(0)2
x=x2
Rearrange into a quadratic equation:
x2−x=0
Factor out x:
x(x−1)=0
This gives two possible values for x: x=0 or x=1.
- If x=0 and y=0, then z=0+i(0)=0.
- If x=1 and y=0, then z=1+i(0)=1. Both z=0 and z=1 are distinct solutions.
Case B: x=1
Substitute x=1 into Equation 1:
1=(1)2−y2
1=1−y2
Subtract 1 from both sides:
0=−y2
This implies y2=0, so y=0.
This case gives x=1 and y=0, which corresponds to z=1+i(0)=1. This is the same solution we found in Case A.
-
Count the distinct values of z:
From our analysis, the distinct values of z that satisfy the given condition are z=0 and z=1.
There are two such values.
✓Final answerThe number of values of a complex number z satisfying the condition is 2.
-
- TG EAPCET 2025Set eng-2025-05-02-FN1 markMCQQ.If f(x)=tan(x+1+4π) is a real valued function then the range of f is (A) [−1,1] (B) (0,1] (C) [−1,∞) (D) R
›Reveal solutionSolution
The function is a composition of a decreasing inner square-root expression and the tangent function over a restricted domain; the range is (0,1], so option (B) is correct.
We need the range of f(x)=tan(x+1+4π) for real x where the function is defined.
The key is to find what values the argument of tan can take, then see what outputs tan gives on that interval.
Concept & Intuition
The tangent function is periodic and unbounded, but here its argument is squeezed into a small interval because the denominator x+1+4 is always at least 4. That means the fraction big numberπ stays small — specifically between 0 and 4π. On (0,4π), tan is positive, increasing, and bounded between 0 and 1. So the range is (0,1].
Step-by-step reasoning
-
Domain of f
We need x+1 defined, so x+1≥0⇒x≥−1.
Also, the denominator x+1+4 is never zero (it’s always ≥4), so no further restriction.
Domain: [−1,∞).
-
Behavior of the inner expression
Let t=x+1. For x≥−1, t≥0.
Then the argument of tan is
θ=t+4π.
As x increases from −1 to ∞, t increases from 0 to ∞.
-
Range of θ
- When x=−1: t=0, so θ=4π.
- As x→∞: t→∞, so θ→0+. Since t+4 increases, θ decreases continuously. Hence θ∈(0,4π].
-
Apply tan
On the interval (0,4π], tan is:
- Continuous and strictly increasing.
- tan(0+)=0+ (approaches 0 from above).
- tan(4π)=1.
Therefore, the outputs cover (0,1].
-
Check endpoints
- At x=−1, f(−1)=tan(4π)=1, so 1 is included.
- 0 is never attained because θ never equals 0 (only approaches it). So range is (0,1].
Watch outA common mistake is to think tan can give negative values here — but the argument is always positive and less than 2π, so tan stays positive. Also, tan does not blow up because the argument never reaches 2π.
TipNotice that the denominator x+1+4 is always at least 4, so the fraction denominatorπ is at most 4π. That immediately bounds the tangent between 0 and 1.
✓Final answerThe correct option is (B).
ANSWER: B
-
- TG EAPCET 2025Set eng-2025-05-02-FN1 markMCQQ.Let z=x+iy and P(x,y) be a point on the Argand plane. If z satisfies the condition
[!FORMULA] Arg(z+2iz−3i)=4π
then the locus of P is (A) x2+y2−y−6=0,(x,y)=(0,−2) (B) x2+y2−x−y−6=0,(x,y)=(0,−2) (C) x2+y2+5x−y−6=0,(x,y)=(0,−2) (D) x2+y2+x−y−6=0,(x,y)=(0,−2)›Reveal solutionSolution
Rationalising z+2iz−3i and setting its argument to 4π gives x2+y2+5x−y−6=0 (with (0,−2) excluded) — option (C).
Let z=x+iy, so z−3i=x+i(y−3) and z+2i=x+i(y+2). Multiply by the conjugate of the denominator:
z+2iz−3i=x2+(y+2)2[x+i(y−3)][x−i(y+2)].
Expand the numerator:
- Real part: x2+(y−3)(y+2)=x2+y2−y−6.
- Imaginary part: x(y−3)−x(y+2)=−5x.
So the number is
x2+(y+2)2(x2+y2−y−6)−5xi.
Since Arg=4π and tan4π=1, the imaginary and real parts are equal (both positive):
−5x=x2+y2−y−6⇒x2+y2+5x−y−6=0.
The point z=−2i, i.e. (0,−2), makes the denominator zero and is excluded. (The positivity requirement −5x>0 further restricts the locus to the arc with x<0.)
✓Final answerx2+y2+5x−y−6=0, (x,y)=(0,−2) — option (C).
- TG EAPCET 2025Set eng-2025-05-03-AN1 markMCQQ.The amplitude of the complex number (−1+i)(−1−i)(3+i)(1−3i) is (A) 2π (B) 3π (C) −125π (D) −6π
›Reveal solutionSolution
The amplitude (argument) is −6π, so the answer is (D).
Write each factor in polar form and combine arguments (add for products, subtract for the quotient).
Numerator
- 3+i: modulus 2, argument 6π.
- 1−3i: modulus 2, argument −3π.
Numerator argument =6π−3π=−6π.
Denominator
(−1+i)(−1−i)=(−1)2−(i)2=1−(−1)=2, a positive real number, so its argument is 0.
Combine
arg(z)=−6π−0=−6π,
which lies in (−π,π] and is therefore the principal amplitude.
✓Final answerAmplitude =−6π, option (D).
- TG EAPCET 2025Set eng-2025-05-03-FN1 markMCQQ.The amplitude of the complex number (−1+i)(−1−i)(3+i)(1−3i) is (A) 2π (B) 3π (C) −125π (D) −6π
›Reveal solutionSolution
The expression reduces to 3−i, whose amplitude is −6π. Option (D).
Solution
Simplify numerator and denominator directly.
Numerator:
(3+i)(1−3i)=3−3i+i−3i2=3−2i+3=23−2i.
Denominator: the factors are conjugates, so
(−1+i)(−1−i)=(−1)2−(i)2=1+1=2.
Therefore
z=223−2i=3−i.
Its argument: real part 3>0, imaginary part −1<0 (fourth quadrant), so
argz=arctan(3−1)=−6π.
✓Final answerOption (D): −6π.
- TG EAPCET 2025Set eng-2025-05-04-FN1 markMCQQ.If ω=1 is a cube root of unity, then one root among the 7th roots of (1+ω) is (A) 1+ω (B) ω−ω2ω (C) 1−ω (D) ω−ω2
›Reveal solutionSolution
Since 1+ω=−ω2 and (1+ω)6=ω12=1, the number 1+ω is itself a 7th root of (1+ω) — option (A).
Using 1+ω+ω2=0 gives 1+ω=−ω2. A number z is a 7th root of (1+ω) iff z7=1+ω.
Test z=1+ω=−ω2:
z7=(−ω2)7=−ω14=−ω12⋅ω2=−ω2=1+ω,
because ω12=(ω3)4=1. Hence z7=1+ω, so 1+ω is a 7th root of (1+ω) — equivalently (1+ω)6=ω12=1.
The other options fail the modulus test: a 7th root of −ω2 (modulus 1) must have modulus 1, but ω−ω2=i3 and 1−ω have modulus 3, and ω−ω2ω=1−ω1 has modulus 31.
✓Final answerOne 7th root of (1+ω) is 1+ω — option (A).
ANSWER: A
- TG EAPCET 2024Set eng-2024-05-09-FN1 markMCQQ.The domain of the real valued function f(x)=cos(sinx)+cos−1(2x1+x2) is (A) (−1,1) (B) [−1,1] (C) R−(−1,1) (D) {−1,1}
›Reveal solutionSolution
The domain is the set of real numbers where both terms are defined: the square root requires cos(sinx)≥0 (true for all real x), and the inverse cosine requires 2x1+x2≤1 and x=0, which forces x=±1. So the domain is {−1,1}, option (D).
The key idea: a function defined by a sum is only valid where every piece is defined. Here we have a square root and an inverse cosine. The square root’s domain is where its inside is non‑negative; the inverse cosine’s domain is where its argument lies in [−1,1]. We find the intersection of these conditions.
Why this approach works:
Instead of guessing, we treat each term separately. The square root term looks scary but simplifies because sinx is bounded and cosine is always non‑negative on the range of sinx. The inverse cosine term is the restrictive one — it forces a very narrow set of x values.
-
First term: cos(sinx)
For the square root to be real, we need cos(sinx)≥0.
Since sinx∈[−1,1], we check: for any y∈[−1,1], is cosy≥0?
The cosine function is non‑negative on [−π/2,π/2], and [−1,1] is a subset of that interval (because 1<π/2≈1.57).
Therefore cos(sinx)>0 for all real x.
So the first term imposes no restriction — its domain is R.
-
Second term: cos−1(2x1+x2)
The inverse cosine function cos−1(t) is defined only for t∈[−1,1].
So we require
−1≤2x1+x2≤1.
Also, the denominator 2x cannot be zero, so x=0.
- Solve the inequality Consider the right inequality first:
2x1+x2≤1.
Bring to one side:
2x1+x2−1≤0⇒2x1+x2−2x≤0⇒2x(x−1)2≤0.
The numerator (x−1)2 is always ≥0 and equals 0 only at x=1.
So the fraction is ≤0 only when the denominator is negative (since numerator is non‑negative).
That means 2x<0, i.e. x<0, or numerator = 0 (i.e. x=1).
So from this inequality: x<0 or x=1.
Now the left inequality:
−1≤2x1+x2⇒2x1+x2+1≥0⇒2x1+x2+2x≥0⇒2x(x+1)2≥0.
The numerator (x+1)2≥0, zero only at x=−1.
The fraction is ≥0 when denominator 2x>0 (i.e. x>0) or numerator = 0 (i.e. x=−1).
So from this inequality: x>0 or x=−1.
-
Combine both conditions
From the right inequality: x<0 or x=1.
From the left inequality: x>0 or x=−1.
The intersection (and remembering x=0) gives:
- x<0 and x>0 is impossible.
- x<0 and x=−1 gives x=−1.
- x=1 and x>0 gives x=1.
- x=1 and x=−1 is impossible.
So the only solutions are x=−1 and x=1.
-
Final domain
The first term accepts all real x, the second term accepts only x=±1.
Hence the domain of f is {−1,1}.
Watch outA common mistake is to forget that cos−1(t) requires t to be in [−1,1], not just t≤1. Also, dividing by x without considering sign can lead to missing the x=±1 cases.
TipNotice that 2x1+x2 is exactly 21(x+x1), which by AM–GM has magnitude at least 1 for x>0 and at most −1 for x<0, with equality only at x=±1. That instantly gives the domain.
✓Final answerThe correct option is (D).
ANSWER: D
-
- TG EAPCET 2024Set eng-2024-05-09-FN1 markMCQQ.x and y are two complex numbers such that ∣x∣=∣y∣=1. If Arg(x)=2α, Arg(y)=3β and α+β=36π, then x6y4+x6y41= (A) 0 (B) −1 (C) 1 (D) 21
›Reveal solutionSolution
The key is to express x6y4 in polar form using the given arguments, simplify the exponent using α+β=π/36, and then evaluate z+1/z for a complex number on the unit circle — the result is 1.
We are given two complex numbers x and y on the unit circle (∣x∣=∣y∣=1), with arguments Arg(x)=2α and Arg(y)=3β, and the condition α+β=π/36.
We need x6y4+x6y41.
Concept & Intuition
When a complex number lies on the unit circle, its reciprocal equals its conjugate. So z+1/z=z+z=2Re(z).
Thus the problem reduces to finding the real part of x6y4. Since x and y are on the unit circle, their powers are also on the unit circle, and their arguments add. The given relation α+β=π/36 will simplify the total argument to a nice angle whose cosine we know exactly.
Step-by-step
- Write x and y in polar form Since ∣x∣=∣y∣=1, we have
x=ei⋅2α,y=ei⋅3β.
- Compute x6y4
x6=(ei⋅2α)6=ei⋅12α,y4=(ei⋅3β)4=ei⋅12β.
Hence
x6y4=ei(12α+12β)=ei⋅12(α+β).
- Use the given α+β=π/36
12(α+β)=12⋅36π=3π.
So
x6y4=eiπ/3.
- Evaluate z+1/z for z=eiπ/3 Since ∣z∣=1, we have 1/z=z=e−iπ/3. Therefore
z+z1=eiπ/3+e−iπ/3=2cos(3π)=2⋅21=1.
TipA common pitfall is forgetting that 1/z=z only when ∣z∣=1 — here it holds because x and y are on the unit circle, so their product is also on the unit circle.
✓Final answerThe correct option is (C).
ANSWER: C
- TG EAPCET 2024Set eng-2024-05-10-AN1 markMCQQ.If Z1=3+i3 and Z2=3+i, and (Z2Z1)50=x+iy, then the point (x,y) lies in (A) first quadrant (B) second quadrant (C) third quadrant (D) fourth quadrant
›Reveal solutionSolution
Work in polar form: arg(Z1/Z2)=4π−6π=12π, so the 50th power has argument 1250π=625π≡6π. Both x and y are positive, so (x,y) is in the first quadrant — option (A).
Step 1 — argument of Z1=3+i3.
θ1=arctan33=arctan1=4π.
Step 2 — argument of Z2=3+i.
θ2=arctan31=6π.
Step 3 — argument of the quotient.
arg(Z2Z1)=θ1−θ2=4π−6π=123π−2π=12π.
Step 4 — raise to the 50th power (De Moivre).
arg(Z2Z1)50=50⋅12π=625π.
Reduce modulo 2π: 625π−4π=625π−24π=6π.
Step 5 — locate the point.
The modulus (26)50 is positive and the reduced angle 6π lies in the first quadrant, so x=rcos6π>0 and y=rsin6π>0.
✓Final answerThe point (x,y) lies in the first quadrant — option (A).
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.