Q.Assertion (A): A liquid crystallises into a solid and is accompanied by decrease in entropy.
Reason (R): In crystals, molecules organise in an ordered manner.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Entropy Change Prediction
Entropy Change Prediction
Imagine you have a box of marbles — all neatly arranged, reds on one side, blues on the other. Now shake the box. What happens? The colours mix. They never spontaneously unmix. That tendency — for things to go from ordered to disordered — is what entropy measures. Entropy is a measure of disorder or randomness in a system.
When you predict an entropy change, you're asking: Will this process make the system more disordered or less disordered? And by how much?
The Core Intuition
Entropy change (ΔS) is positive when disorder increases, negative when disorder decreases. Three things drive this:
- Volume change — More space means more positions for particles → more disorder. A gas expanding into vacuum has ΔS>0.
- Temperature change — Higher temperature means particles move faster, explore more states → more disorder. Heating something increases entropy.
- Phase change — Solid → liquid → gas is a ladder of increasing disorder. Melting ice increases entropy; freezing water decreases it.
Entropy always increases for spontaneous processes in an isolated system (Second Law of Thermodynamics). But for a non-isolated system, entropy can decrease locally — as long as the surroundings' entropy increases enough to compensate.
The Precise Statement
For a reversible process at constant temperature, the entropy change is:
ΔS=TQrev
where Qrev is the heat transferred reversibly, and T is the absolute temperature (in Kelvin).
For an irreversible process (which is what actually happens), you calculate ΔS by imagining a reversible path between the same initial and final states — because entropy is a state function. It depends only on where you start and end, not how you get there.
ΔS=∫TdQrev
For common cases, you use these:
| Process | Formula | Sign intuition |
|---|---|---|
| Isothermal expansion/compression (ideal gas) | ΔS=nRlnV1V2 | Expanding → more volume → ΔS>0 |
| Heating/cooling (constant pressure) | ΔS=nCplnT1T2 | Heating → higher T → ΔS>0 |
| Phase change (melting, boiling) | ΔS=TphaseΔHphase | Melting/boiling → more disorder → ΔS>0 |
How to Predict Without Calculation
You don't always need numbers. Ask these questions in order:
- Is there a phase change? Solid → liquid or liquid → gas always increases entropy. Reverse decreases it.
- Is the number of gas molecules changing? In a reaction, more gas molecules means more disorder. 2H2+O2→2H2O (gas → liquid) has ΔS<0 because 3 gas molecules become 2 liquid molecules.
- Is temperature increasing or decreasing? Higher temperature → higher entropy.
- Is volume increasing? More space → more entropy. …
Concept: Entropy Change Prediction
Entropy measures the degree of disorder or randomness in a system. When a liquid crystallizes into a solid, molecules transition from a relatively disordered state (free to move and tumble) to a highly ordered, fixed arrangement in the crystal lattice. This ordering corresponds to a decrease in entropy (ΔS<0). …
Crystallisation reduces disorder as molecules move from random liquid motion to fixed lattice positions, so entropy decreases. Both statements are true, and the ordered arrangement in crystals directly explains the entropy drop.
Entropy measures the degree of disorder or randomness in a system. When we predict whether a process increases or decreases entropy, we look at how the freedom of molecular motion changes.
In a liquid, molecules slide past one another with considerable translational and rotational freedom. They occupy no fixed positions and their arrangement is constantly shifting. This high degree of randomness corresponds to high entropy.
When that liquid crystallises into a solid, the molecules lock into a rigid three-dimensional lattice. Each molecule now vibrates about a fixed equilibrium position. The translational and rotational freedoms are severely restricted. The system has moved from disorder to order, so entropy decreases.
Now let's examine both statements:
-
Assertion (A): "A liquid crystallises into a solid and is accompanied by decrease in entropy."
This is true. Crystallisation is an exothermic phase transition (ΔH<0) that occurs spontaneously below the freezing point. Even though ΔSsystem<0, the heat released increases the entropy of the surroundings enough that ΔStotal>0, satisfying the second law. The assertion correctly identifies that the system's entropy decreases.
-
Reason (R): "In crystals, molecules organise in an ordered manner."
This is also true. Crystals are defined by their long-range periodic order—atoms or molecules occupy specific lattice sites with translational symmetry. This ordered arrangement is the hallmark of the crystalline state.
-
Does R explain A? …
Showing the 12 most recent of 17 on this concept.
- AP EAPCET 2026Set eng-2026-05-14-AN1 markMCQQ.Match the following List – I: A. ΔrH°=+, ΔrS°=−, ΔrG°=+ B. ΔrH°=−, ΔrS°=−, ΔrG°=− C. ΔrH°=+, ΔrS°=+, ΔrG°=+ D. ΔrH°=+, ΔrS°=+, ΔrG°=− List - II (Description about the reaction): I. Non spontaneous at low temperature II. Spontaneous at high temperature III. Non spontaneous at all temperatures IV. Spontaneous at low temperature (A) A-III, B-IV, C-II, D-I (B) A-III, B-IV, C-I, D-II (C) A-IV, B-III, C-II, D-I (D) A-II, B-IV, C-I, D-III
›Reveal solutionSolution
Applying ΔG=ΔH−TΔS to each sign-combination pins down its temperature-dependence: A→III, B→IV, C→I, D→II, matching option (B).
Concept and Intuition
Spontaneity is governed by the competition between ΔH (enthalpy term) and −TΔS (entropy term scaled by temperature) inside ΔG=ΔH−TΔS. When both terms have the SAME sign effect on ΔG (both push it positive, or both push it negative), the spontaneity doesn't depend on temperature at all. When they OPPOSE each other, temperature decides which one wins — giving a spontaneity that flips at some crossover T.
Step-by-Step Solution
- A: ΔH=+, ΔS=− (⇒ΔG=+). Here −TΔS is positive too (since ΔS<0), so BOTH terms make ΔG positive at every temperature — non-spontaneous no matter what T is → matches III (non-spontaneous at all temperatures).
- B: ΔH=−, ΔS=− (⇒ΔG=−). ΔH is negative (favours spontaneity) but −TΔS is positive (opposes it) and grows with T. At LOW T the small −TΔS term can't overcome the negative ΔH, so ΔG stays negative — spontaneous at low T → matches IV. …
- AP EAPCET 2026Set ap-2026-05-20-FN1 markMCQQ.At T(K), a gas is adsorbed on the surface of a solid. The signs of ΔH and ΔS are respectively (A) negative, negative (B) positive, positive (C) positive, negative (D) negative, positive
›Reveal solutionSolution
Adsorption is always exothermic (ΔH<0) and always decreases entropy (ΔS<0), since it converts free gas molecules into an ordered surface layer.
Concept and Intuition
When gas molecules adsorb onto a solid surface, they lose translational degrees of freedom and become confined to (approximately) two dimensions on the surface — this is always a decrease in disorder, so ΔSads is negative. For adsorption to be spontaneous (ΔG=ΔH−TΔS<0) despite this entropy decrease, ΔH must be sufficiently negative (i.e. the process must release heat) to outweigh the unfavourable −TΔS term. This is why adsorption is universally observed to be exothermic.
Step-by-Step Solution
- Consider the process: gas (free, high entropy) → gas adsorbed on solid surface (confined, low entropy).
- The system becomes more ordered, so ΔS<0 (negative) always for adsorption. …
- AP EAPCET 2025Set eng-2025-05-22-FN1 markMCQQ.For which of the following processes entropy change (ΔS) is negative ? (only) I) Sublimation of dry ice II) Freezing of water III) Crystallisation of the dissolved substance IV) Burning of rocket fuel (A) I & II only (B) II & III only (C) III & IV only (D) I & IV only
›Reveal solutionSolution
Tests recognizing entropy decrease vs increase from physical/chemical changes in state of order; freezing and crystallisation both decrease entropy, giving option (B).
Concept and Intuition
Entropy is a measure of disorder/randomness. Processes that increase randomness (solid → liquid → gas, dissolution, more gas moles produced) have positive ΔS. Processes that increase order (gas/liquid → solid, particles coming together into an ordered lattice, decreasing number of gas moles) have negative ΔS.
Step-by-Step Solution
- I) Sublimation of dry ice: solid CO2 directly becomes gaseous CO2 — a large increase in disorder (more freedom of motion) → ΔS>0. Not negative.
- II) Freezing of water: liquid water (more disordered) becomes ice (ordered crystal lattice) → ΔS<0. Negative — qualifies.
- III) Crystallisation of a dissolved substance: solute molecules/ions moving freely in solution come together into an ordered crystalline solid → ΔS<0. Negative — qualifies. …
- AP EAPCET 2024Set ap-2024-05-16-FN1 markMCQQ.Given below are two statements Statement I: The entropy of pure crystalline solid approaches zero as the temperature approaches absolute zero value Statement II: For a reaction at equilibrium, ΔrG is zero The correct answer is (A) Both statements I and II are correct (B) Both statements I and II are not correct (C) Statement I is correct, but statement II is not correct (D) Statement I is not correct, but statement II is correct
›Reveal solutionSolution
Statement I is the Third Law of Thermodynamics (true), and Statement II is the condition for chemical equilibrium (true). Therefore both statements are correct, and the answer is (A).
Concept and Intuition: Why This Approach Works
This question tests two foundational ideas in thermodynamics that often appear together in exams.
- Statement I is a direct recall of the Third Law of Thermodynamics — a cornerstone principle about the behavior of entropy at absolute zero.
- Statement II is about the Gibbs free energy criterion for equilibrium — a central result from chemical thermodynamics.
The trick is not to overthink: each statement stands on its own, and both are textbook-true. The only pitfall is confusing “entropy at absolute zero” with “entropy change” or misremembering the equilibrium condition.
Step-by-Step Reasoning
-
Evaluate Statement I: Entropy at absolute zero
The Third Law of Thermodynamics states: The entropy of a perfect crystalline substance is zero at absolute zero (0 K).
More precisely, as T→0, the entropy S→0 for a pure, perfectly ordered crystal.
This is because at 0 K, the system is in its single, lowest-energy microstate, giving S=klnW=kln1=0.
✓ Statement I is correct.
-
Evaluate Statement II: Gibbs free energy at equilibrium
For a reaction at constant temperature and pressure, the Gibbs free energy change is:
ΔrG=ΔrH−TΔrS
At equilibrium, the forward and reverse rates are equal, and the system has no net tendency to change. The thermodynamic condition for equilibrium is:
ΔrG=0 …
- AP EAPCET 2024Set ap-2024-05-17-FN1 markMCQQ.Observe the following processes I. O2(l)→O2(g) II. N2(g)+3H2(g)→2NH3(g) III. C(s,graphite)→C(s,diamond) IV. N2(g,1 atm)→N2(g,10 atm) V. H2(g)→2H(g) VI. Temperature of a crystalline solid is raised from 0 K to 115 K for how many of the above processes, change in entropy is negative (A) 2 (B) 3 (C) 4 (D) 1
›Reveal solutionSolution
Entropy decreases when disorder/moles-of-gas/volume decreases; here processes II, III and IV are the ones with negative ΔS, so the count is 3.
Concept and Intuition
Entropy tracks the number of accessible microstates — more gas moles, more volume, more freedom of motion, and higher temperature all raise it, while compression, bond formation that reduces particle count, and forming a more rigid/ordered solid lower it.
Step-by-Step Solution
- I. O2(l)→O2(g): vaporization always increases entropy (gas has far more freedom than liquid) → positive.
- II. N2+3H2→2NH3: 4 moles of gas become 2 moles of gas, fewer independent particles/less disorder → negative.
- III. C(graphite)→C(diamond): graphite's loosely stacked sp² layers have higher entropy than diamond's rigid covalent sp³ network (standard molar entropies confirm Sgraphite∘>Sdiamond∘) → negative.
- IV. N2(g,1 atm)→N2(g,10 atm): compressing a gas at constant T reduces the volume available, reducing entropy → negative.
- V. H2(g)→2H(g): one mole of gas becomes two, more disorder/more translational states → positive. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.At 300 K, for the reaction A → P, the ΔSsys is 5 JK−1 mol−1. What is the heat absorbed (in kJ mol−1) by the system? (A) 1.5 (B) 15 (C) 1500 (D) 0.6
›Reveal solutionSolution
This tests the thermodynamic definition of entropy change for a reversible process, ΔS=qrev/T; the heat absorbed works out to 1.5 kJ/mol.
Concept and Intuition
Entropy is defined (for a reversible path) as the heat exchanged divided by the absolute temperature at which the exchange occurs. So if we are told ΔSsys at a given T, we can directly back out the reversible heat absorbed by the system — no need for any other thermodynamic data.
Step-by-Step Solution
- Reversible-process relation: ΔS=Tqrev.
- Rearranging: qrev=ΔS×T=5 J K−1mol−1×300 K=1500 J mol−1.
- Converting to kJ: 1500 J mol−1=1.5 kJ mol−1. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.Identify the incorrect statements from the following I. ΔSsystem=(ΔStotal+ΔSsurr) II. A(l)→A(s); for this process entropy change decreases III. Entropy units are J K mol−1 (A) I, III only (B) I, II only (C) I, II, III (D) II, III only
›Reveal solutionSolution
This checks three commonly-confused entropy facts; only I and III are actually wrong, so (A) I, III only is correct.
Concept and Intuition
Total entropy change of the universe is the sum of the system's and surroundings' entropy changes — this is the Second Law's bookkeeping identity, and getting the terms on the wrong side of the equals sign is a very common slip. Physically, entropy tracks disorder/microstates, so freezing a liquid (more ordered arrangement) must decrease entropy. And entropy's units must carry an inverse power of temperature, since ΔS=q/T.
Step-by-Step Solution
- Statement I: The Second Law bookkeeping identity is ΔStotal=ΔSsystem+ΔSsurr. As written, "ΔSsystem=ΔStotal+ΔSsurr" has the terms transposed — incorrect.
- Statement II: A(l)→A(s) is a liquid solidifying — molecules become more ordered, so entropy decreases. This statement is correct (true), so it is not one of the "incorrect" statements being asked for. …
- AP EAPCET 2024Set eng-2024-05-20-AN1 markMCQQ.The molar heats of fusion and vapourisation of benzene are 10.9 and 31.0 kJ mol−1 respectively. The changes in entropy for the solid → liquid and liquid → vapour transitions for benzene are x and y, J K−1 mol−1, respectively. The value of (y-x) (in J K−1 mol−1) is (At 1 atm, benzene melts at 5.5 °C and boils at 80 °C) (A) 87.8 (B) 48.7 (C) 39.1 (D) 28.7
›Reveal solutionSolution
Entropy of a phase transition at its transition temperature is ΔH/T; computing both fusion and vaporisation entropies for benzene and subtracting gives 48.7 J/K/mol.
Concept and Intuition
At a reversible phase transition occurring at constant temperature and pressure, ΔS=ΔH/T (with T in kelvin, the transition temperature). This applies separately to melting (fusion) and boiling (vaporisation), each at its own characteristic temperature.
Step-by-Step Solution
- Fusion: T=5.5°C=278.65 K, ΔHfus=10.9 kJ/mol =10900 J/mol. x=10900/278.65≈39.1 J K−1 mol−1.
- Vaporisation: T=80°C=353.15 K, ΔHvap=31.0 kJ/mol =31000 J/mol. …
- AP EAPCET 2024Set eng-2024-05-21-FN1 markMCQQ.Identify the correct statements from the following I. ΔrG is zero for A ⇌ B reaction II. The entropy of pure crystalline solids approaches zero as the temperature approaches absolute zero III. ΔU of a reaction can be determined using bomb calorimeter (A) I, II only (B) I, III only (C) II, III only (D) I, II, III
›Reveal solutionSolution
This tests three independent thermodynamics facts — the condition at equilibrium, the Third Law, and what a bomb calorimeter measures — all three are correct.
Concept and Intuition
Thermodynamics distinguishes between the standard free energy change ΔrG∘ (a fixed reference quantity) and the free energy change ΔrG under the actual reaction conditions, which becomes zero exactly at equilibrium. The Third Law fixes the reference point for absolute entropy. Calorimetry technique determines whether the measured heat corresponds to ΔU (constant volume, bomb calorimeter) or ΔH (constant pressure, coffee-cup calorimeter).
Step-by-Step Solution
- Statement I: For any reaction at equilibrium, ΔrG=ΔrG∘+RTlnQ, and at equilibrium Q=K, so ΔrG∘=−RTlnK and thus ΔrG=0. Since A ⇌ B denotes an equilibrium, ΔrG=0 holds. True.
- Statement II: The Third Law of Thermodynamics states that the entropy of a perfectly ordered crystalline substance is zero at absolute zero, and approaches zero as T→0 K. True. …
- AP EAPCET 2024Set eng-2024-05-23-FN1 markMCQQ.Observe the following reactions I. CaCO3(s)→CaO(s)+CO2(g) II. Cl2(g)→2Cl(g) III. H2O(l)→H2O(s) Identify the reactions in which entropy increases (A) I, II, III (B) I, II Only (C) I, III Only (D) II, III Only
›Reveal solutionSolution
Entropy tracks disorder; it rises when a gas is produced or a bond is broken into more particles, and falls on freezing. Only reactions I and II show an entropy increase.
Concept and Intuition
Entropy is a measure of the number of ways energy/matter can be arranged (disorder). Processes that increase the number of gas molecules, break a substance into more independent particles, or convert a more-ordered phase (solid) into a less-ordered one (liquid/gas) increase entropy. The reverse — condensation, freezing, or reducing the number of gas particles — decreases entropy.
Step-by-Step Solution
- I. CaCO3(s)→CaO(s)+CO2(g): a solid decomposes to give a solid plus a gas. Gas has far higher entropy than solid, so overall entropy increases.
- II. Cl2(g)→2Cl(g): one mole of gas becomes two moles of gas (bond breaking increases the number of independent gaseous particles) — entropy increases. …
- AP EAPCET 2023Set ap-2023-05-23-FN1 markMCQQ.Which of the following reactions are endothermic and spontaneous?(i) 21H2(g)+21Cl2(g)→HCl(g)(ii) C(Graphite)+2S(l)→CS2(l)(iii) 21N2(g)+23H2(g)→NH3(g)(iv) H2(g)+21O2(g)→H2O(l)(v) 21N2(g)+O2(g)→NO2(g) (A) (ii),(v) only (B) (iii),(v) only (C) (i),(ii) only (D) (iii),(iv) only
›Reveal solutionSolution
Among the five formation reactions, only CS₂ and NO₂ have positive (endothermic) enthalpies of formation — HCl, NH₃, and H₂O are all classic exothermic formations — so (ii) and (v) are the pair being asked for.
Concept and Intuition
"Endothermic and spontaneous" reactions are a useful teaching example because they show that spontaneity is governed by ΔG=ΔH−TΔS, not by ΔH alone — a positive ΔH (heat absorbed) can still be overwhelmed by a sufficiently large, positive TΔS term to give an overall negative ΔG. The first filter, though, is simply checking which of the five reactions are even endothermic in the first place (positive ΔHfθ), since a reaction that's exothermic to begin with cannot be the "endothermic" answer regardless of its spontaneity.
Step-by-Step Solution
- (i) 21H2+21Cl2→HCl: strongly exothermic (ΔHfθ≈−92 kJ/mol) — not endothermic, eliminate.
- (ii) C(graphite)+2S(l)→CS2(l): endothermic (ΔHfθ is positive for CS₂ formation from the elements) — keep as a candidate.
- (iii) 21N2+23H2→NH3: exothermic (Haber process, ΔHfθ≈−46 kJ/mol) — not endothermic, eliminate.
- (iv) H2+21O2→H2O(l): strongly exothermic (ΔHfθ≈−286 kJ/mol) — not endothermic, eliminate. …
- AP EAPCET 2022Set ap-2022-07-11-FN1 markMCQQ.In adsorption, the thermodynamic requirement is (A) ΔH=+ve ; ΔS=+ve (B) ΔH=−ve ; ΔS=−ve (C) ΔH=−ve ; ΔS=+ve (D) ΔH=+ve ; ΔS=−ve
›Reveal solutionSolution
This tests the standard thermodynamic signs for physical/chemical adsorption: both enthalpy and entropy change are negative, and spontaneity is maintained by the dominant exothermicity.
Concept and Intuition
When a gas is adsorbed onto a solid surface, the gas molecules go from a highly disordered, freely-moving state to a more ordered, surface-bound state — this is always accompanied by a decrease in entropy (ΔS<0). For the process to remain spontaneous (ΔG=ΔH−TΔS<0) despite the unfavourable (negative) entropy term, ΔH must be negative and large enough in magnitude — i.e., adsorption is exothermic.
Step-by-Step Solution
- Write the Gibbs-Helmholtz relation: ΔG=ΔH−TΔS.
- Adsorption decreases the randomness of gas molecules (they become localized on the surface), so ΔS=−ve. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.