Q.Examine the consistency of the following system of equations: 2x−y=5 x+y=4
Concept understanding — Matrix Equation Solving
Solving a System of Equations by the Matrix Method
A system of linear equations can be written as a single matrix equation and solved in one clean step using the inverse of a matrix. This is the Class-12 "matrix method" for simultaneous equations.
Writing the system as AX=B
Take the system
a1x+b1y+c1z=d1,a2x+b2y+c2z=d2,a3x+b3y+c3z=d3.
Collect the coefficients, the unknowns, and the constants into matrices:
A=a1a2a3b1b2b3c1c2c3,X=xyz,B=d1d2d3.
Then the whole system is just
AX=B.
Solving when A is invertible
If det(A)=0, then A−1 exists, and multiplying both sides on the left by A−1 gives
X=A−1B,where A−1=det(A)1adj(A).
So you compute det(A), then adj(A), form A−1, and multiply by B. The single column X=A−1B hands you x, y, z at once, and because A−1 is unique, the solution is unique.
Multiply in the correct order: X=A−1B, not BA−1. Matrix multiplication is not commutative, and BA−1 is not even defined here.
When det(A)=0
If det(A)=0, A−1 does not exist and the inverse method fails. The system is then either inconsistent (no solution) or has infinitely many solutions. Decide which by computing (adjA)B:
- (adjA)B=O → no solution (inconsistent).
- (adjA)B=O → infinitely many solutions (consistent, dependent).
A homogeneous system AX=O always has the trivial solution X=O; it has non-trivial solutions exactly when det(A)=0.
The takeaway
Package the equations as AX=B; if det(A)=0 the answer is the single formula X=A−1B. The determinant is your first check — it tells you whether a unique solution exists before you do any heavy computation.
Solving a system of linear equations using the matrix method (X = A⁻¹B) is a major application covered in the CBSE Class 12 Determinants chapter, and "solve system of equations using matrix method class 12" is one of the most searched topics in this unit given its near-guaranteed appearance in board exams. This same inverse-based technique is also tested in JEE Main questions on the consistency of linear systems.
The key idea is to write the system as a matrix equation Ax=b and check whether rank(A)=rank([A∣b]).
Step 1 — Write the augmented matrix.
[A∣b]=(21−11∣∣54)
Step 2 — Row reduce.
Swap rows:
(121−1∣∣45)
Replace R2 with R2−2R1:
(101−3∣∣4−3)
Step 3 — Compare ranks.
Both A and [A∣b] have 2 non-zero rows, so rank(A)=rank([A∣b])=2, which equals the number of variables. The system is consistent and has a unique solution.
The system is consistent with a unique solution.
The system 2x−y=5 and x+y=4 is consistent because the two lines intersect at a unique point (3,1), which satisfies both equations.
Why This Problem Matters
When you hear "consistency" in a system of linear equations, you're really asking: Can these equations all be true at the same time? If yes, the system is consistent; if no, it's inconsistent. For two equations in two variables, consistency means the lines either intersect (one solution) or coincide (infinitely many solutions). Parallel lines? That's inconsistency — no point satisfies both.
Here, we have two simple linear equations. Let's check whether they play nicely together.
Step-by-Step Solution
1. Write the system clearly
We have:
{2x−y=5x+y=4
2. Choose a method — elimination is cleanest here
Notice the y terms: one is −y, the other is +y. If we add the two equations, y cancels out immediately. That's the fastest path.
3. Add the equations
Add left-hand sides and right-hand sides separately:
(2x−y)+(x+y)=5+4
Simplify:
3x+0y=9⇒3x=9
4. Solve for x
Divide both sides by 3:
x=3
5. Substitute back to find y
Use the second equation x+y=4 (it's simpler):
3+y=4⇒y=1
6. Verify with the first equation
Plug (3,1) into 2x−y=5:
2(3)−1=6−1=5
It checks out perfectly.
Always verify with the equation you didn't use for substitution. That catches arithmetic mistakes.
7. Interpret the result
We found exactly one solution: (x,y)=(3,1). This means the two lines intersect at a single point. The system is consistent (has at least one solution) and independent (exactly one solution).
A common mistake is to think "consistent" means "has infinitely many solutions." No — consistent just means at least one solution exists. One solution is enough.
Why This Approach Works
Elimination is powerful because it reduces the system to a single equation in one variable. Here, the coefficients of y were opposites (−1 and +1), so adding eliminated y instantly. If they weren't opposites, we'd multiply one equation to make them so — but that wasn't needed.
Alternatively, you could solve by substitution (from x+y=4, get y=4−x, then plug into 2x−(4−x)=5). You'd get the same answer. The method doesn't matter; the logic of consistency does.
For a system of two linear equations in two variables:
- Consistent & independent: exactly one solution (lines intersect)
- Consistent & dependent: infinitely many solutions (lines coincide)
- Inconsistent: no solution (lines are parallel)
Final Answer
The system is consistent with the unique solution (x,y)=(3,1).
Method: Consistency by the Determinant Test, Confirmed by Elimination
Use this method whenever you are asked to decide if a pair of linear equations has a solution, without necessarily being asked for the solution itself.
Steps
Step 1: Identify the coefficient matrix
For a system a1x+b1y=c1, a2x+b2y=c2, write
A=(a1a2b1b2)
ignoring the constants for now — consistency for a non-zero determinant depends only on A.
Step 2: Compute det(A)=a1b2−a2b1
A non-zero value means A is invertible, so a unique (x,y) exists — the system is consistent by that fact alone, with no need to look at the constants.
Step 3: State the consistency conclusion
det(A)=0⇒unique solution⇒consistent (and independent, not merely ’has infinitely many’).
Step 4 — Applying to this problem: confirm with elimination
Once you know a unique solution exists, actually finding it is a good habit (and often asked for anyway). Pick whichever variable has opposite-sign coefficients across the two equations and add the equations directly to eliminate it in one step, rather than first hunting for a common multiple — the fastest path when the signs already cooperate.
Common Mistakes
Mistake 1: Assuming 'consistent' means 'infinitely many solutions'
Why it's wrong: consistent only means at least one solution exists — a single unique solution, like the (3,1) found here, is just as consistent as an infinite family. 'Infinitely many' is one particular kind of consistent system (dependent equations), not a requirement for consistency. Correct approach: read off consistency from det(A)=0 alone; the count of solutions (one vs. infinite) is a separate question that only arises once det(A)=0.
Mistake 2: A sign slip when adding the equations to eliminate y
Why it's wrong: here 2x−y=5 and x+y=4 have opposite-sign y coefficients (−1 and +1) specifically so that ADDING the equations cancels y; subtracting them instead would double y (giving x−2y=1) rather than eliminate it, sending the whole elimination off track. Correct approach: before eliminating, check the sign of the coefficient in each equation — add when the signs are already opposite, subtract only when they are the same.
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2025Set eng-2025-05-22-AN1 markMCQQ.The number of solutions of the system of equations 2x+y−z=7, x−3y+2z=1, x+4y−3z=5 is (A) 1 (B) 0 (C) Infinite (D) 2
›Reveal solutionSolution
The coefficient determinant is 0, and substitution shows the equations are mutually contradictory — the system has no solution. Answer: (B).
Concept and Intuition
When the determinant of the coefficient matrix of a 3×3 linear system is zero, the system is NOT guaranteed a unique solution — it is either inconsistent (no solution) or has infinitely many solutions, depending on whether the equations are compatible. The way to tell them apart is to actually eliminate variables and see whether you reach a contradiction (like 0= nonzero) or a genuine identity (0=0).
Step-by-Step Solution
- System: (1) 2x+y−z=7; (2) x−3y+2z=1; (3) x+4y−3z=5.
- Coefficient determinant: 2111−34−12−3=2[(−3)(−3)−2(4)]−1[1(−3)−2(1)]+(−1)[1(4)−(−3)(1)] =2(9−8)−1(−3−2)−1(4+3)=2(1)−1(−5)−1(7)=2+5−7=0.
- Since the determinant is 0, solve by substitution to check consistency. From (2): x=1+3y−2z.
- Substitute into (1): 2(1+3y−2z)+y−z=7⇒2+6y−4z+y−z=7⇒7y−5z=5.
- Substitute into (3): (1+3y−2z)+4y−3z=5⇒1+7y−5z=5⇒7y−5z=4.
- Steps 4 and 5 both compute 7y−5z but give different values (5 vs 4) — this is a direct contradiction (5=4), so no (y,z) (hence no (x,y,z)) can satisfy the system simultaneously.
- Therefore the system has no solution (0 solutions), not infinitely many.
Common Mistakes
- Concluding "determinant =0 ⇒ infinite solutions" without checking consistency — zero determinant only rules out a unique solution, it doesn't decide between 0 and ∞.
- Arithmetic slips while eliminating x — always redo the elimination from a second pair of equations as a check, as done here.
✓Final answerThe correct option is (B) — 0.
ANSWER: B
- AP EAPCET 2024Set eng-2024-05-22-AN1 markMCQQ.The system of linear equations x+2y+z=−3, 3x+3y−2z=−1, 2x+7y+7z=−4 has (A) infinite number of solutions (B) no solution (C) unique solution (D) finite number of solutions
›Reveal solutionSolution
Eliminating one variable reduces the system to two equations that contradict each other outright, which is the signature of an inconsistent linear system: the coefficient determinant is zero, but the system does not have infinitely many solutions — it has none.
Concept and Intuition
When the determinant of the coefficient matrix of a 3×3 linear system is zero, the system is not guaranteed a unique solution — but that alone doesn't tell you whether it has infinitely many solutions or none at all. You have to check consistency by actually trying to solve (or by comparing ranks of the coefficient matrix and the augmented matrix). A quick, reliable way for a 3-variable system is to eliminate one variable using two different pairs of equations and see if the resulting two-variable equations agree or contradict.
Step-by-Step Solution
- Equations: (1) x+2y+z=−3, (2) 3x+3y−2z=−1, (3) 2x+7y+7z=−4.
- From (1): x=−3−2y−z.
- Substitute into (2): 3(−3−2y−z)+3y−2z=−1⇒−9−6y−3z+3y−2z=−1⇒−9−3y−5z=−1⇒3y+5z=−8. Call this (A).
- Substitute into (3): 2(−3−2y−z)+7y+7z=−4⇒−6−4y−2z+7y+7z=−4⇒−6+3y+5z=−4⇒3y+5z=2. Call this (B).
- Compare (A) and (B): both say "3y+5z= something," but (A) requires it to equal −8 while (B) requires it to equal 2. These cannot both be true — a direct contradiction.
- Since no values of y,z (and hence no x) can satisfy the system simultaneously, the system has no solution.
Common Mistakes
- Seeing that the coefficient determinant is zero and jumping straight to "infinite solutions" — a zero determinant only rules out a unique solution; you still must check consistency to distinguish "infinite solutions" from "no solution."
- Arithmetic slips while eliminating x — it's worth double-checking both substitutions independently since the whole conclusion hinges on the two derived equations genuinely conflicting.
✓Final answerThe correct option is (B) — no solution.
ANSWER: B
- AP EAPCET 2021Set eng-2021-08-24-FN1 markMCQQ.The system of equations 2x+6y=−11, 6x+20y−6z=−3, 6y−18z=−1 are (A) Inconsistent (B) Consistent with unique solution (C) Consistent with countable infinite many solutions (D) Consistent with infinitely many solutions
›Reveal solutionSolution
Eliminating x and z from the three equations produces two contradictory conditions on y−3z (15 vs −1/6), so the system is inconsistent (no solution).
Concept and Intuition
A linear system is inconsistent when the equations, after elimination, reduce to a statement that is never true (like 0= nonzero number). This happens when the coefficient matrix is singular (determinant zero) but the augmented matrix has higher rank — i.e., the planes described by the equations don't share a common point.
Step-by-Step Solution
- Write the equations: (1) 2x+6y=−11; (2) 6x+20y−6z=−3; (3) 6y−18z=−1.
- Eliminate x between (1) and (2): multiply (1) by 3: 6x+18y=−33. Subtract from (2): (6x+20y−6z)−(6x+18y)=−3−(−33) ⇒2y−6z=30⇒y−3z=15. Call this Equation A.
- Now look at equation (3) directly: 6y−18z=−1. Divide by 6: y−3z=−61. Call this Equation B.
- Equations A and B both express y−3z but give different values: 15 from A, and −61 from B. Since 15=−61, no values of y,z can satisfy both simultaneously.
- This contradiction means the original system of three equations has no solution — it is inconsistent.
- (This can be cross-checked: the coefficient matrix has determinant 0, since row (3) is proportional to the "y,z-part" derived from eliminating (1),(2) — but the constants don't match up, which is exactly the signature of an inconsistent system rather than infinitely many solutions.)
Common Mistakes
- Stopping after finding determinant of the coefficient matrix is zero and concluding "infinitely many solutions" — a zero determinant only means either no solution or infinitely many; one must check whether the constants are consistent (as done above) to distinguish the two cases.
✓Final answerThe correct option is (A) — Inconsistent.
ANSWER: A
- AP EAPCET 2026Set eng-2026-05-18-AN1 markMCQQ.The augmented matrix of a nonhomogeneous system of equations AX=B, [A B] is reduced to the following form after applying a series of elementary row transformations 1001001−3μ+154λ2−2λ+1, Then (A) Only for μ=−1, AX=B has unique solution (B) Only for μ=−1 and λ=1, AX=B has infinite number of solutions (C) For any μ and for any λ, AX=B has infinite number of solutions (D) For all positive values of μ, AX=B has no solution
›Reveal solutionSolution
The coefficient matrix always has rank 2 (rows 2 and 3 are parallel), so a unique
solution is never possible; and for any positive μ, row 3 always contradicts the
z-value fixed by row 2, forcing "no solution". Answer: (D).
Concept and Intuition
For AX=B with augmented matrix reduced to
1001001−3μ+154λ2−2λ+1,
read off the coefficient rows (ignore the last column) for x,y,z: (1,1,1),
(0,0,−3), (0,0,μ+1). The second and third rows are both scalar multiples of (0,0,1) for every value of μ — they can never be linearly independent of each
other. So rank(A)≤2 always (it equals 2, from row 1 and row 2, since row
2 is never the zero vector). Since there are 3 unknowns but rank never reaches 3, a
unique solution is structurally impossible no matter what μ,λ are.
Row 2 directly gives −3z=4⇒z=−4/3, a fixed value. Row 3 imposes a second
constraint on the same variable z: (μ+1)z=λ2−2λ+1=(λ−1)2.
Substituting z=−4/3: −34(μ+1)=(λ−1)2. For consistency, this
equality must hold; since the right side (λ−1)2≥0, we need −34(μ+1)≥0, i.e. μ+1≤0, i.e. μ≤−1.
Step-by-Step Solution
- From row 2: −3z=4⇒z=−34.
- From row 3: (μ+1)z=λ2−2λ+1=(λ−1)2.
- Substitute: (μ+1)(−34)=(λ−1)2.
- Check option (A): coefficient-matrix rank is always 2 (rows 2, 3 parallel) — a unique solution needs rank 3, which never happens. So (A) is false.
- Check option (D): if μ>0, then μ+1>0, so the left side −34(μ+1) is strictly negative, but the right side (λ−1)2 is always ≥0. A negative number can never equal a non-negative number, so the equation in step 3 is never satisfied for any positive μ — the system is inconsistent, giving no solution, for every positive μ and every λ.
- Check (B): setting μ=−1,λ=1 does give infinitely many solutions, but it is not the only such pair (e.g. μ=−2 with (λ−1)2=4/3 also works), so the word "Only" makes (B) false.
- Check (C): infinite solutions require the specific relation −34(μ+1)=(λ−1)2, not any μ,λ — so (C) is false.
- (D) is the only universally true statement.
Common Mistakes
- Assuming a 3×3-looking coefficient matrix automatically allows a unique solution — always check the actual rank; here rows 2 and 3 collapse to the same direction regardless of μ.
- Missing that row 3 constrains the same variable z that row 2 already fixed, rather than introducing a genuinely new equation.
✓Final answerThe correct option is (D) — For all positive values of μ, AX=B has no solution.
ANSWER: D
- AP EAPCET 2024Set eng-2024-05-20-FN1 markMCQQ.If the solution of the system of simultaneous linear equations x+y−z=6, 3x+2y−z=5 and 2x−y−2z+3=0 is x=α,y=β,z=γ, then α+β= (A) −7 (B) 2 (C) 1 (D) −2
›Reveal solutionSolution
Solving the 3×3 linear system directly gives x=−3, y=5, z=8, so α+β=x+y=2.
Concept and Intuition
A straightforward system of 3 linear equations in 3 unknowns — eliminate one variable at a time using simple linear combinations, rather than invoking full Cramer's rule, since the numbers are small.
Step-by-Step Solution
- The equations are:
x+y−z=6(1)
3x+2y−z=5(2)
2x−y−2z=−3(3) (rewriting 2x−y−2z+3=0)
- Subtract (1) from (2): (3x+2y−z)−(x+y−z)=5−6⇒2x+y=−1 ... (4)
- From (1): z=x+y−6.
- Substitute into (3): 2x−y−2(x+y−6)=−3⇒2x−y−2x−2y+12=−3⇒−3y+12=−3⇒−3y=−15⇒y=5.
- Substitute y=5 into (4): 2x+5=−1⇒2x=−6⇒x=−3.
- So α=x=−3 and β=y=5; then α+β=−3+5=2.
- (Check: z=x+y−6=−3+5−6=−4; verify (2): 3(−3)+2(5)−(−4)=−9+10+4=5 ✓.)
Common Mistakes
- Sign errors when rewriting 2x−y−2z+3=0 as 2x−y−2z=−3.
- Mixing up α,β,γ with x,y,z — the question asks for α+β, i.e. x+y, not x+y+z.
✓Final answerThe correct option is (B) — 2.
ANSWER: B
- AP EAPCET 2022Set eng-2022-07-07-FN1 markMCQQ.If the system of simultaneous linear equations x+y−z=6, 3x−y+z=2 and x+ky+z=−8 has a unique solution x=2,y=β,z=γ then the value of k satisfies the following quadratic equation (A) x2−5x+6=0 (B) x2+x−6=0 (C) x2−x−6=0 (D) x2+x−2=0
›Reveal solutionSolution
Adding the first two equations forces x=2; requiring an integer solution triple gives k=2 or k=−3, so k satisfies x2+x−6=0.
Adding the first two equations:
(x+y−z)+(3x−y+z)=6+2⇒4x=8⇒x=2.
From equation 1 with x=2: y−z=4, i.e. z=y−4.
Substitute into equation 3 (x+ky+z=−8):
2+ky+(y−4)=−8⇒y(k+1)=−6⇒y=k+1−6.
A unique solution needs the coefficient determinant −4(k+1)=0, i.e. k=−1. For the solution (x,y,z) to be an integer triple (consistent with the given integer x=2), y=k+1−6 must be an integer, and the admissible values are
- k=2: (x,y,z)=(2,−2,−6) ✓
- k=−3: (x,y,z)=(2,3,−1) ✓
Both values k=2,−3 are the roots of
(x−2)(x+3)=x2+x−6=0.
✓Final answerk satisfies x2+x−6=0 (roots 2 and −3) — option (B).
- AP EAPCET 2022Set eng-2022-07-05-AN1 markMCQQ.If the solution of the system of simultaneous equations x1+y2−z3−1=0, x2−y4+z3−1=0 and x3+y6−z6−4=0 is x=α,y=β,z=γ then α2+γ2= (A) 5β (B) β2 (C) 3β (D) 2β2
›Reveal solutionSolution
Substitute u=1/x,v=1/y,w=1/z to reduce the system to a linear system, solve for x,y,z, then evaluate α2+γ2 against β.
Concept and Intuition
The equations are linear in 1/x,1/y,1/z even though they look nonlinear in x,y,z. Substituting turns this into a standard 3×3 linear system, easily solved by elimination.
Step-by-Step Solution
- Let u=1/x, v=1/y, w=1/z. The system becomes: u+2v−3w=1 ... (1); 2u−4v+3w=1 ... (2); 3u+6v−6w=4 ... (3).
- Add (1)+(2): 3u−2v=2 ... (i).
- Compute (3)−3×(1): (3u+6v−6w)−3(u+2v−3w)=4−3⇒3w=1⇒w=31.
- Substitute w=1/3 into (1): u+2v−1=1⇒u+2v=2 ... (ii).
- Add (i)+(ii): 4u=4⇒u=1; then from (ii): 2v=1⇒v=21.
- So x=1/u=1=α, y=1/v=2=β, z=1/w=3=γ.
- α2+γ2=12+32=1+9=10. Since β=2, 5β=10 — matches.
Common Mistakes
- Arithmetic slips while eliminating variables in the linear system.
- Forgetting to invert back from u,v,w to x,y,z=α,β,γ at the end.
✓Final answerThe correct option is (A) — 5β.
ANSWER: A
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.While solving a system of linear equations AX=B using Cramer's rule with the usual notation, if Δ=12−11−11125; Δ1=54111−11125 and X=α2β, then α2+β2= (A) 9 (B) 13 (C) 5 (D) 25
›Reveal solutionSolution
This tests Cramer's rule bookkeeping: computing α directly from Δ1/Δ, then recovering β by reconstructing the right-hand-side vector B implicit in Δ1 and using the known value of y=2.
Concept and Intuition
In Cramer's rule for AX=B with A a 3×3 coefficient matrix and X=(α,y,β)T: Δ=det(A), and Δ1 is the determinant formed by replacing the first column of A (the column of coefficients of α) with B. So α=Δ1/Δ directly. Moreover, since Δ1's 2nd and 3rd columns are unchanged from A's, we can read the vector B straight off Δ1's first column. Once B is known, and given y=2 is already provided, we can plug into the original equations AX=B (using A's actual rows) to solve for the remaining unknown β.
Step-by-Step Solution
- Compute Δ=12−11−11125. Expanding along row 1: 1[(−1)(5)−(2)(1)]−1[(2)(5)−(2)(−1)]+1[(2)(1)−(−1)(−1)]=1(−7)−1(12)+1(1)=−7−12+1=−18.
- Compute Δ1=54111−11125. Expanding along row 1: 5[(−1)(5)−(2)(1)]−1[(4)(5)−(2)(11)]+1[(4)(1)−(−1)(11)]=5(−7)−1(−2)+1(15)=−35+2+15=−18.
- By Cramer's rule, α=Δ1/Δ=(−18)/(−18)=1.
- Since Δ1's columns 2 and 3 match A's columns 2 and 3 exactly (compare: A's column 2 is (1,−1,1)T and column 3 is (1,2,5)T, matching Δ1), Δ1's column 1, (5,4,11)T, must be the RHS vector B.
- Now use A's actual rows with X=(α,y,β)=(1,2,β) and B=(5,4,11): Row 1: 1(1)+1(2)+1(β)=5⇒3+β=5⇒β=2.
- Verify with row 2: 2(1)+(−1)(2)+2(β)=2−2+2(2)=4 ✓ (matches B2=4). Verify with row 3: −1(1)+1(2)+5(β)=−1+2+10=11 ✓ (matches B3=11). Both check out, confirming β=2.
- Finally, α2+β2=12+22=1+4=5.
Common Mistakes
- Forgetting that Δ1 replaces the column corresponding to the first unknown (α), not the second (y) — this determines which column of Δ1 actually represents B.
- Arithmetic slips in the 3×3 determinant expansions (sign errors are especially common).
- Trying to find β without first identifying the actual right-hand-side vector B from Δ1 — this reconstruction step is the crux of the problem.
✓Final answerThe correct option is (C) — 5.
ANSWER: C
- AP EAPCET 2021Set eng-2021-08-25-AN1 markMCQQ.The number of solutions of the following system of linear homogenous equations x−y+z=0,x+2y−z=0,2x+y+3z=0 is ________ (A) 1 (B) 8 (C) Countable infinite (D) Uncountable
›Reveal solutionSolution
A homogeneous linear system has only the trivial solution when its coefficient determinant is non-zero. Answer: (A).
Concept and Intuition
For a homogeneous system Ax=0, if det(A)=0, the only solution is x=0 (a unique, single solution). If det(A)=0, infinitely many solutions exist.
Step-by-Step Solution
- Coefficient matrix: 112−1211−13.
- Expand along the first row: 1(2⋅3−(−1)⋅1)−(−1)(1⋅3−(−1)⋅2)+1(1⋅1−2⋅2).
- =1(6+1)+1(3+2)+1(1−4)=7+5−3=9.
- Since det=9=0, the system has only the trivial solution x=y=z=0 — exactly one solution.
Common Mistakes
- Assuming a homogeneous system automatically has infinitely many solutions (true only when the determinant is zero).
✓Final answerThe correct option is (A) — 1.
ANSWER: A
- AP EAPCET 2025Set eng-2025-05-24-FN1 markMCQQ.Consider two systems of 3 linear equations in 3 unknowns AX=B and CX=D. If AX=B has unique solution D and CX=D has unique solution B, then the solution of (A−C−1)X=O is (A) B (B) D (C) B+D (D) B-D
›Reveal solutionSolution
This tests translating "X=D solves AX=B" and "X=B solves CX=D" into matrix equations and combining them algebraically.
Concept and Intuition
"AX=B has unique solution D" is just a restatement that plugging X=D into the system satisfies it: AD=B. Likewise "CX=D has unique solution B" means CB=D. The question is which of the listed vectors satisfies the new homogeneous system (A−C−1)X=O; the trick is to express everything in terms of D and B and see what cancels.
Step-by-Step Solution
- From "AX=B has unique solution D": AD=B. — (i)
- From "CX=D has unique solution B": CB=D. Multiply both sides by C−1: B=C−1D. — (ii)
- Substitute (ii) into (i): AD=C−1D.
- Rearranging: AD−C−1D=O⇒(A−C−1)D=O.
- This says exactly that X=D satisfies (A−C−1)X=O.
Common Mistakes
- Confusing which vector solves which system (mixing up B and D's roles).
- Trying to invert (A−C−1) directly instead of substituting the two given relations.
✓Final answerThe correct option is (B) — D.
ANSWER: B
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.If A=12354−130−5, B=−1−24 and [x y z]AT=BT, then x+y+z= (A) 4 (B) −2 (C) 6 (D) 3
›Reveal solutionSolution
Transposing the matrix equation converts it into the ordinary linear system A·v = B, which solves to x=6, y=−7/2, z=7/2, giving x+y+z=6.
Concept and Intuition
"[x y z]Aᵀ = Bᵀ" is a row-vector equation. Taking the transpose of both sides converts it to the more familiar column form: (v Aᵀ)ᵀ = A vᵀ, and (Bᵀ)ᵀ = B. So the equation is equivalent to A·(x,y,z)ᵀ = B, a standard system of 3 linear equations.
Step-by-Step Solution
- A = [[1,5,3],[2,4,0],[3,−1,−5]], B = (−1,−2,4)ᵀ.
- Write the system A(x,y,z)ᵀ = B:
- x + 5y + 3z = −1
- 2x + 4y = −2
- 3x − y − 5z = 4
- From equation 2: 2x+4y=−2 ⟹ x+2y=−1 ⟹ x = −1−2y.
- Substitute into equation 1: (−1−2y)+5y+3z = −1 ⟹ 3y+3z=0 ⟹ z=−y.
- Substitute x and z into equation 3: 3(−1−2y) − y − 5(−y) = 4 ⟹ −3−6y−y+5y = 4 ⟹ −3−2y=4 ⟹ y=−7/2.
- Then x = −1−2(−7/2) = 6, and z = −y = 7/2.
- x+y+z = 6 + (−7/2) + 7/2 = 6.
Common Mistakes
- Not transposing correctly and trying to solve [x y z]Aᵀ=Bᵀ as a row-times-matrix system directly without converting it to A·v=B — this leads to using the wrong matrix (Aᵀ instead of A after conversion, or sign errors).
- Arithmetic slip when eliminating variables between the three equations.
✓Final answerThe correct option is (C) — 6.
ANSWER: C
- AP EAPCET 2023Set eng-2023-05-17-FN1 markMCQQ.If the solution for the system of equations x+2y−z=3, 3x−y+2z=1 and 2x−2y+3z=2 is (α,β,γ), then α2+β2+γ2= (A) 33 (B) 5 (C) 17 (D) 14
›Reveal solutionSolution
Solving the system gives (x,y,z) = (-1, 4, 4), so the sum of squares is 33.
Concept and Intuition
A system of three linear equations in three unknowns can be solved by systematic elimination.
Step-by-Step Solution
- Equations: (i) x+2y-z=3; (ii) 3x-y+2z=1; (iii) 2x-2y+3z=2.
- From (i): x = 3-2y+z.
- Substitute into (ii): 3(3-2y+z)-y+2z=1 -> -7y+5z=-8 -> 7y-5z=8. (iv)
- Substitute into (iii): 2(3-2y+z)-2y+3z=2 -> -6y+5z=-4 -> 6y-5z=4. (v)
- (iv)-(v): y=4.
- From (v): 6(4)-5z=4 -> z=4.
- x = 3-2(4)+4 = -1.
- Verify in (ii): 3(-1)-4+2(4)=1 checks. Verify in (iii): 2(-1)-2(4)+3(4)=2 checks.
- (alpha,beta,gamma)=(-1,4,4), sum of squares = 1+16+16=33.
Common Mistakes
- Sign errors during elimination.
- Forgetting to verify the solution in all three equations.
✓Final answerThe correct option is (A) — 33.
ANSWER: A
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.