Q.Consider a coin of Question 1.20. It is electrically neutral and contains equal amounts of positive and negative charge of magnitude 34.8 kC. Suppose that these equal charges were concentrated in two point charges separated by
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Inverse Square Law Comparison
The Intuition: Why Does Light Get Dimmer So Fast?
Imagine you're standing near a campfire. You feel its warmth on your face. Now take ten steps back. Does the warmth feel half as strong? No — it feels much weaker, maybe a quarter as strong. That's not an accident. It's a pattern that shows up everywhere in physics: gravity, light, sound, electric fields, even radiation.
The reason is simple: as you move away from a source, the same amount of energy (or force) has to spread out over a larger area. And that area grows with the square of the distance.
The Core Idea in One Picture
Think of a light bulb at the centre of a balloon. As you inflate the balloon, the light hitting the inner surface spreads thinner and thinner. If you double the radius of the balloon, the surface area becomes four times larger. So each patch of the balloon gets only one-fourth the light.
That's the inverse square law in a nutshell: double the distance → one-fourth the intensity.
The Precise Statement
I∝r21orI=r2k
where:
- I = intensity (brightness, force per unit area, etc.)
- r = distance from the source
- k = a constant that depends on the source's strength
If you compare two distances r1 and r2, the ratio of intensities is:
I1I2=(r2r1)2
This is the inverse square law comparison — you compare how strong a quantity is at two different distances by taking the inverse ratio of the squares of those distances.
Why "Inverse Square" and Not Just "Inverse"?
Because the geometry of space is three-dimensional. The surface of a sphere is 4πr2. As r grows, the sphere's surface grows as r2. Whatever is radiating outward (light, sound, gravity) must pass through that entire surface. So the amount per unit area drops as 1/r2.
If we lived in a flat, two-dimensional world, the law would be 1/r (like ripples on a pond). In one dimension, it would be constant. The inverse square law is a direct consequence of living in three dimensions.
The Comparison: What It Really Means
When you compare two situations, you're not calculating absolute intensity — you're finding the ratio. For example:
A star is 3 times farther away than another identical star. How much dimmer does it appear?
InearIfar=(31)2=91
The farther star is 9 times dimmer. Not 3 times — 9 times. That's the punch of the square.
A common mistake: thinking "twice the distance means half the intensity." It's actually one-fourth. The square makes the drop much steeper than linear intuition suggests. …
Why this formula?
Inverse Square Law Comparison — Why the Formula Holds
The Inverse Square Law appears in physics wherever a quantity spreads out uniformly from a point source in three-dimensional space. The core idea is that the intensity (or field strength) decreases as the square of the distance from the source.
1. The Intuition: Spreading Over a Sphere
Imagine a point source emitting energy, light, sound, or gravitational force equally in all directions.
- At a distance r, the energy is spread uniformly over the surface area of a sphere of radius r.
- The surface area of a sphere is:
A=4πr2
If the total power (or flux) emitted by the source is P, then the intensity I (power per unit area) at distance r is:
I=4πr2P
Key insight: The same total power is spread over a larger and larger area as r increases. Hence, intensity is inversely proportional to r2.
2. Derivation for Gravitational Force (Newton's Law)
Newton’s law of gravitation states:
F=r2GMm
Why 1/r2?
- The gravitational field lines from a point mass M radiate outward uniformly.
- The number of field lines crossing a sphere of radius r is constant (conservation of flux).
- The density of field lines (force per unit mass) at distance r is:
g=r2GM
- This is because the total flux Φ=4πGM is spread over 4πr2, giving:
g=4πr2Φ=r2GM
Thus, the force on a test mass m is F=mg=r2GMm.
3. Derivation for Coulomb's Law (Electrostatics)
Coulomb’s law for electric force between two point charges q1 and q2:
F=r2kq1q2
Why 1/r2?
- Electric field lines from a point charge q radiate radially outward (or inward for negative charge).
- Gauss’s law states that the total electric flux through a closed surface is proportional to the enclosed charge:
∮E⋅dA=ε0q
- For a sphere of radius r centered on the charge, the field is radial and constant in magnitude:
E⋅4πr2=ε0q
- Therefore:
E=4πε01r2q
- The force on a test charge q2 is F=q2E=4πε01r2q1q2.
4. Derivation for Light/Radiation Intensity
For a point source of light emitting power P:
- At distance r, the power is spread over a sphere of area 4πr2.
- Illuminance (intensity) is:
I=4πr2P
Why not 1/r?
- In 2D (e.g., a line source), intensity falls as 1/r because the circumference of a circle is 2πr.
- In 3D, the surface area grows as r2, so intensity falls as 1/r2.
5. The Common Mathematical Reason
All inverse square laws arise from conservation of flux in three-dimensional space with isotropic emission. The geometry forces: …
The key idea is the Inverse Square Law: the electrostatic force between two point charges is F=4πε01r2q1q2. Here, q1=q2=34.8 kC=3.48×104 C, and 4πε01=9×109 N m2/C2.
Step 1: Write the force formula.
F=9×109×r2(3.48×104)2
Step 2: Compute (3.48×104)2=1.21104×109≈1.21×109.
Step 3: So F=9×109×r21.21×109=r21.089×1019 N.
Step 4: Substitute each r:
- (i) r=0.01 m: F=10−41.089×1019=1.089×1023 N
- (ii) r=100 m: F=1041.089×1019=1.089×1015 N
- (iii) r=106 m: F=10121.089×1019=1.089×107 N …
By Coulomb's law F=r2kq2 with q=34.8 kC, the forces are (i) 1.09×1023 N,
(ii) 1.09×1015 N,
(iii) 1.09×107 N. Even at Earth-radius separation the force is colossal, so a coin's positive and negative charges must be intimately mixed — matter is stable only because it is electrically neutral at every macroscopic scale.
Set up the constant part
The magnitude of the force between the two point charges is
F=4πε01r2q2=r2kq2,k=8.99×109 N m2C−2
With q=34.8 kC=3.48×104 C:
q2=(3.48×104)2=1.211×109 C2,kq2=8.99×109×1.211×109=1.09×1019 N m2
This numerator is the same in all three cases; only r changes.
Case (i): r=1 cm=10−2 m
F=(10−2)21.09×1019=10−41.09×1019=1.09×1023 N
Case (ii): r=100 m=102 m
F=(102)21.09×1019=1041.09×1019=1.09×1015 N
Case (iii): r=106 m
F=(106)21.09×1019=10121.09×1019=1.09×107 N
Conclusion …
Method: Coulomb’s Law (Inverse Square Law Comparison)
We use Coulomb’s Law for point charges:
F=4πε01⋅r2q1q2
where
- 4πε01=9×109 N m2/C2
- q1=q2=34.8 kC=34.8×103 C
Steps
- Write the general formula Since both charges are equal:
F=9×109⋅r2(34.8×103)2
- Simplify the numerator
(34.8×103)2=(34.8)2×106=1211.04×106
So:
F=9×109×r21211.04×106
F=r21.089936×1019 N
-
Substitute each separation distance (in metres)
- (i) r=1 cm=0.01 m
F=(0.01)21.089936×1019=10−41.089936×1019
F=1.09×1023 N
- (ii) r=100 m
F=(100)21.089936×1019=1041.089936×1019
F=1.09×1015 N
- (iii) r=106 m …
Common Mistakes on Inverse Square Law Comparison Problems
Students often make predictable errors when comparing electrostatic forces across vastly different distances. Here are the most frequent ones — and how to avoid each.
1. Forgetting the Square in the Denominator
The Mistake
Students treat the force as inversely proportional to distance (F∝1/r) instead of distance squared (F∝1/r2). This leads to underestimating how rapidly force drops.
Example of Error
If r increases by 100×, a student might think F becomes 1/100 of its original value — but the correct factor is 1/1002=1/10,000.
How to Avoid
- Write Coulomb’s law every time before substituting:
F=r2kq1q2
- Circle the r2 term. Remind yourself: double the distance → force drops to one-fourth.
2. Unit Conversion Errors
The Mistake
Plugging in distances in cm or km without converting to metres. Since k=9×109 N m2/C2, the SI unit for r is metres.
Example of Error
Using r=1 cm as 1 instead of 0.01 m gives a force 104 times too large.
How to Avoid
- Convert all distances to metres before calculation:
- 1 cm=1×10−2 m
- 100 m stays as is
- 106 m stays as is
- Write the conversion step explicitly:
r=1 cm=0.01 m
3. Misinterpreting "Force on Each Point Charge"
The Mistake
Students calculate the total force between the two charges but forget that each charge experiences the same magnitude of force (Newton’s Third Law). Some then halve the result incorrectly.
How to Avoid
- Remember: F12=F21 in magnitude.
- The question asks for the force on each — the answer is the same number for both charges.
- No need to divide by 2.
4. Not Recognising the Scale of the Numbers
The Mistake
After computing, students don’t check if the answer is physically plausible. For q=34.8 kC (that’s 3.48×104 C), forces are enormous — even at large distances.
Example of Error
Getting a force like 10−5 N for r=1 cm and not realising it’s absurdly small for such huge charges.
Quick Sanity Check
For r=1 cm:
F=(0.01)2(9×109)(3.48×104)2≈1.09×1020 N
That’s huge — comparable to the weight of a mountain. If your answer is tiny, you’ve made a unit or exponent error.
How to Avoid
- Estimate orders of magnitude before calculating:
- q2≈109
- k≈1010
- r2 for 1 cm ≈10−4 …
- AP EAPCET 2025Set eng-2025-05-22-FN1 markMCQQ.Two solid spheres each of radius 'R' made of same material are placed in contact with each other. If the gravitational force acting between them is F, then (A) F∝R4 (B) F∝R3 (C) F∝R2 (D) F∝R
›Reveal solutionSolution
Combines m∝R3 with Newton's gravitation law at fixed separation 2R to get F∝R4.
Concept and Intuition
Both the mass of each sphere and the distance between their centres change with R, so you can't just plug R into F=Gm1m2/d2 naively — you must express both m and d in terms of R first, since the spheres are made of the same material (constant density) and are always touching (so d=2R).
Step-by-Step Solution
- Mass of each sphere: m=ρ⋅34πR3⇒m∝R3.
- Separation between centres (spheres touching): d=R+R=2R. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.Two satellites of masses m and 1.5m are revolving around the earth with different speeds in two circular orbits of heights RE and 2RE respectively, where RE is the radius of the earth. The ratio of the minimum and maximum gravitational forces on the earth due to the two satellites is (A) 2:5 (B) 2:3 (C) 1:2 (D) 1:5
›Reveal solutionSolution
The minimum and maximum gravitational forces are in the ratio 2:3.
Concept and Intuition
By Newton's law of gravitation the force between the earth and a satellite is F=r2GMmsat, where r is the distance from the earth's centre, i.e. radius of earth plus height of orbit.
Step-by-Step Solution
- Satellite 1: mass m, height RE⇒r1=RE+RE=2RE. F1=(2RE)2GMm=4RE2GMm.
- Satellite 2: mass 1.5m, height 2RE⇒r2=RE+2RE=3RE. F2=(3RE)2GM(1.5m)=9RE21.5GMm=6RE2GMm.
- Compare: F1=4RE2GMm (larger), F2=6RE2GMm (smaller).
- Minimum : Maximum =F2:F1=61:41=4:6=2:3.
Common Mistakes …
- AP EAPCET 2024Set eng-2024-05-19-AN1 markMCQQ.Two particles of equal mass 'm' and equal charge 'q' are separated by a distance of 16cm. They do not experience any force. The value of mq is _____ (if 'G' is the universal gravitational constant and 'g' is the acceleration due to gravity). (A) 4πϵ0G (B) 4πϵ0G (C) Gπϵ0 (D) 4πϵ0g
›Reveal solutionSolution
This tests balancing Coulomb's law against Newton's law of gravitation for two identical charged masses, which fixes the ratio q/m.
Concept and Intuition
Two identical particles separated by a distance always attract gravitationally and (if like-charged) repel electrostatically. "No net force" means these two forces are equal in magnitude — this condition depends only on q/m, not on the separation distance, since both forces fall off as 1/r2.
Step-by-Step Solution
- Gravitational attraction: Fg=r2Gm2.
- Electrostatic repulsion: Fe=4πϵ01r2q2.
- Setting Fg=Fe: r2Gm2=4πϵ0r2q2. …
- AP EAPCET 2023Set ap-2023-05-23-FN1 markMCQQ.Two objects separated by a distance r gravitationally attract each other with force F. If the distance between them is tripled, the force of attraction between them is (A) 3F (B) 9F (C) 6F (D) F
›Reveal solutionSolution
Gravitational attraction obeys an inverse-square law, so tripling the separation reduces the force to F/9. Answer: (B).
Concept and Intuition
Newton's law of gravitation states F=r2Gm1m2 — the force depends on the square of the separation, so any change in distance is amplified quadratically in its effect on the force.
Step-by-Step Solution
- Initial force: F=r2Gm1m2.
- New separation: r′=3r.
- New force: F′=(3r)2Gm1m2=9r2Gm1m2=9F.
Common Mistakes …
- AP EAPCET 2021Set ap-2021-10-05-FN1 markMCQQ.Match the following? Column I | Column II(a) r0 |(i) Point charge(b) r−1 |(ii) Thin infinitely long wire of uniform linear charge density(c) r−3 |(iii) Infinite uniformly charged plane sheet(d) r−2 |(iv) Electric field on the axial line of short electric dipole (A) (a - iii), (b - ii), (c - iv), (d - i) (B) (a - ii), (b - iv), (c - i), (d - iii) (C) (a - iii), (b - iv), (c - i), (d - ii) (D) (a - iv), (b - iii), (c - i), (d - ii)
›Reveal solutionSolution
Matching each power of r to its standard electrostatic field law: r0↔plane sheet, r−1↔line charge, r−2↔point charge, r−3↔dipole axial field.
Concept and Intuition
The way an electric field falls off with distance reflects the "dimensionality" of the source. A 2-D infinite sheet has a field that never weakens with distance (r0, constant). A 1-D infinite line has a field falling as 1/r (Gauss's law with a cylindrical surface of area ∝r). A 0-D point charge falls as 1/r2 (Gauss's law with a spherical surface of area ∝r2). A dipole — two nearby opposite point charges whose fields almost cancel — falls off one power faster than a single point charge, i.e. 1/r3, because the leading 1/r2 terms cancel and what survives depends on the small separation.
Step-by-Step Solution
- r0 (independent of r): only the infinite plane sheet's field is distance-independent → matches (iii).
- r−1: only the infinite line charge's field decays this slowly → matches (ii).
- r−2: the classic point-charge Coulomb field → matches (i). …
- AP EAPCET 2021Set eng-2021-08-23-FN1 markMCQQ.Find the gravitational force between two stones, each of mass 2 kg and separated by a distance 1 m in vacuum. (A) 0 N (B) 6.675×10−5 N (C) 6.675×10−11 N (D) 2.67×10−10 N
›Reveal solutionSolution
Direct application of Newton's law of universal gravitation gives F≈2.67×10−10 N.
Concept and Intuition
Every pair of masses attracts each other with a force proportional to the product of their masses and inversely proportional to the square of the separation, with the (very small) universal constant G setting the scale. Gravity between everyday-sized masses like stones is astronomically weak — this question tests whether students correctly place the decimal/exponent, not just recall the formula.
Step-by-Step Solution
- Formula: F=r2Gm1m2.
- Substitute G=6.674×10−11 N.m2.kg−2, m1=m2=2 kg, r=1 m. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.