Q.The rate constants of a reaction at 500 K and 700 K are 0.02 s−1 and 0.07 s−1 respectively. Calculate the values of Ea and A.
Concept understanding — Average Rate Of Reaction
Reaction Rate Stoichiometry – From Intuition to Precision
Imagine you are watching a simple reaction:
2NO2→2NO+O2
As NO₂ disappears, NO appears twice as fast as O₂ appears. Why? Because the balanced equation says: for every 2 molecules of NO₂ that break apart, you get 2 molecules of NO and 1 molecule of O₂. The numbers in front of the species — the stoichiometric coefficients — tell you the relative speeds at which reactants vanish and products appear.
That is the core idea: reaction rate stoichiometry is the relationship between the rates of change of different species in a chemical reaction, dictated by their coefficients in the balanced equation.
The Intuitive Picture
Think of a factory assembly line. The balanced equation is like a recipe:
- 2 units of raw material A → 2 units of product B + 1 unit of byproduct C
If the line runs steadily, every time 2 units of A are consumed, 2 units of B are produced and 1 unit of C is produced. So the rate at which A disappears must be twice the rate at which C appears. The rate at which B appears equals the rate at which A disappears (both have coefficient 2).
The stoichiometric coefficients are not speeds themselves — they are scaling factors that connect the speeds of different species.
The Precise Statement
For a general reaction:
aA+bB→cC+dD
The rate of reaction (often called the rate of the process, r) is defined as:
r=−a1dtd[A]=−b1dtd[B]=c1dtd[C]=d1dtd[D]
Here:
- dtd[X] is the instantaneous rate of change of concentration of species X (in mol L⁻¹ s⁻¹).
- The minus sign is used for reactants (their concentration decreases with time).
- The plus sign is used for products (their concentration increases with time).
- Dividing by the coefficient normalises the rate — so r is the same number for every species.
r=−a1dtd[A]=c1dtd[C]
This single value r is the intrinsic rate of the reaction, independent of which species you measure.
How to Use It (Step by Step)
Suppose you are given:
2H2+O2→2H2O
And you measure that dtd[H2]=−0.040 M/s (negative because H₂ is being consumed).
Step 1: Write the rate relation:
r=−21dtd[H2]=−11dtd[O2]=21dtd[H2O]
Step 2: Plug in the known value:
r=−21(−0.040)=+0.020 M/s
Step 3: Find the rate for O₂:
−dtd[O2]=r⇒dtd[O2]=−0.020 M/s
Step 4: Find the rate for H₂O:
21dtd[H2O]=r⇒dtd[H2O]=2r=0.040 M/s
A quick check: the coefficients tell you the relative rates. Here, H₂ disappears twice as fast as O₂, and H₂O appears at the same rate as H₂ disappears (both coefficient 2). Always verify your numbers match the coefficient ratios.
Common Pitfall to Avoid
Do not write dtd[reactant] as a positive number and then forget the minus sign. The rate of change of a reactant is negative (concentration falls). The minus sign in the definition flips it to a positive r. If you skip the sign, you will get the wrong magnitude for other species.
Why This Matters
In exams (JEE, NEET, etc.), you will often be given the rate for one species and asked to find the rate for another. The stoichiometric relation is the only tool you need — no extra formulas. It also appears in more advanced topics like the rate law (where the exponents are not the coefficients) — but that is a separate concept. Reaction rate stoichiometry is purely about the definition of the reaction rate itself.
Final takeaway: The coefficients in the balanced equation are the conversion factors between the rates of different species. Always normalise by dividing by the coefficient to get the universal reaction rate r.
Average rate of reaction is one of the first ideas introduced in the NCERT/CBSE Class 12 Chemistry Chemical Kinetics chapter, and ‘average rate of reaction formula’ or ‘average vs instantaneous rate’ are common important-question topics in board exams and JEE Main chemistry. A solid grasp of this basic definition is also assumed in nearly every subsequent kinetics numerical asked in NEET and state CETs.
Why this formula?
Average Rate of Reaction — Why the Formula Holds
Let’s build this from the ground up. The goal is to understand why the average rate formula looks the way it does — not just memorise it.
1. What does "rate of reaction" mean physically?
A chemical reaction changes the concentration of reactants (decreasing) and products (increasing) over time.
- Rate = how fast this change happens.
- If you measure the change over a finite time interval, you get the average rate.
2. The core idea: change per unit time
For any quantity X that changes from X1 to X2 over time t1 to t2:
Average rate of change of X=ΔtΔX=t2−t1X2−X1
This is just the slope of the straight line connecting the two points on a concentration vs. time graph.
3. Applying this to a reaction
Consider a simple reaction:
A→B
- Reactant A is consumed: [A] decreases.
- Product B is formed: [B] increases.
For reactant A (disappearing):
Average rate=−ΔtΔ[A]
Why the minus sign?
Because Δ[A]=[A]2−[A]1 is negative (concentration drops). The rate itself must be positive (speed is never negative). So we multiply by −1.
For product B (appearing):
Average rate=+ΔtΔ[B]
Here Δ[B] is positive, so no minus sign needed.
4. The general formula for any reaction
For a balanced reaction:
aA+bB→cC+dD
The average rate is defined per mole of reaction — so it’s the same number regardless of which species you track.
We divide each ΔtΔ[species] by its stoichiometric coefficient:
Average rate=−a1ΔtΔ[A]=−b1ΔtΔ[B]=+c1ΔtΔ[C]=+d1ΔtΔ[D]
Why divide by the coefficient?
If 2 moles of A disappear for every 1 mole of C formed, then ΔtΔ[A] is twice as large as ΔtΔ[C]. Dividing by the coefficient normalises them to the same "per mole of reaction" rate.
5. Key exam point: the formula in one line
For any species X with stoichiometric coefficient νX (negative for reactants, positive for products):
Average rate=νX1ΔtΔ[X]
- νX is negative for reactants → the minus sign is already built in.
- νX is positive for products.
6. Why this is the average rate (not instantaneous)
- Average rate uses a finite Δt — it’s the slope of the chord between two points.
- Instantaneous rate uses Δt→0 — it’s the slope of the tangent at a single point.
The average rate formula is just the discrete version of the derivative:
Instantaneous rate=νX1dtd[X]
Summary — the "why" in one sentence
The average rate formula holds because it measures change in concentration per unit time, uses a minus sign to keep rates positive for reactants, and divides by stoichiometric coefficients to give a single, comparable value for the whole reaction.
Always remember:
- Δ[reactant] is negative → minus sign makes it positive.
- Δ[product] is positive → no minus sign.
- Divide by coefficient → normalise to "per mole of reaction".
Concept: Arrhenius equation — the temperature dependence of the rate constant is given by
k=Ae−Ea/RT, and the two-point form eliminates A to solve for Ea first.
Step 1 — Write the two-point Arrhenius equation:
lnk1k2=REa(T11−T21)
Step 2 — Substitute k1=0.02, k2=0.07, T1=500 K, T2=700 K, R=8.314 J mol−1K−1:
ln0.020.07=8.314Ea(5001−7001)
ln3.5=1.2528,5001−7001=35002=5.714×10−4
Step 3 — Solve for Ea:
Ea=5.714×10−41.2528×8.314≈18230 J mol−1=18.23 kJ mol−1
Step 4 — Find A using k=Ae−Ea/RT at either temperature (using 500 K):
A=k1⋅eEa/RT1=0.02×e18230/(8.314×500)=0.02×e4.386≈0.02×80.3≈1.606 s−1
The activation energy is 18.23 kJ mol−1 and the pre-exponential factor is 1.61 s−1.
Using the Arrhenius equation in its two-point logarithmic form, we find the activation energy Ea≈18.23 kJ mol−1 and the pre-exponential factor A≈1.61 s−1.
The Arrhenius equation tells us how the rate constant k depends on temperature:
k=Ae−Ea/RT
Here A is the pre-exponential factor (frequency factor), Ea is the activation energy, R=8.314 J mol−1K−1, and T is the absolute temperature. When we have rate constants at two different temperatures, we can eliminate A by taking a ratio — that’s the classic trick. The ratio cancels A and leaves an equation involving only Ea and the two temperatures.
Let’s work it through.
-
Write the Arrhenius equation for each temperature.
At T1=500 K, k1=0.02 s−1:
lnk1=lnA−RT1Ea
At T2=700 K, k2=0.07 s−1:
lnk2=lnA−RT2Ea
- Subtract the two equations to eliminate lnA.
lnk2−lnk1=−RT2Ea+RT1Ea
Which simplifies to:
ln(k1k2)=REa(T11−T21)
This is the two-point form of the Arrhenius equation — a direct route to Ea when you have data at two temperatures.
ln(k1k2)=REa(T11−T21)
- Plug in the numbers.
k1k2=0.020.07=3.5
ln(3.5)≈1.2528
T11−T21=5001−7001=500×700700−500=350000200=35002=17501
So:
1.2528=8.314Ea×17501
- Solve for Ea.
Ea=1.2528×8.314×1750
Let’s compute step by step:
1.2528×8.314≈10.416
Then:
10.416×1750=10.416×(1000+750)=10416+7812=18228 J mol−1
So:
Ea≈18228 J mol−1=18.23 kJ mol−1
A common mistake is forgetting to convert Ea from J/mol to kJ/mol. Always check the units — exam questions often expect the answer in kJ/mol.
-
Now find A using either temperature.
Use the Arrhenius equation at T1=500 K:
k1=Ae−Ea/(RT1)
First compute the exponent:
RT1Ea=8.314×50018228=415718228≈4.384
So:
e−4.384≈0.01245
Then:
0.02=A×0.01245⇒A=0.012450.02≈1.606≈1.61 s−1
Let’s check with T2=700 K for consistency:
RT2Ea=8.314×70018228=5819.818228≈3.132
e−3.132≈0.0436
A=0.04360.07≈1.605≈1.61 s−1
The two values match beautifully — confirming our Ea is correct.
Always verify A using the second temperature. If the two values of A differ significantly, you’ve made an arithmetic error in Ea.
-
Verify with more precise intermediate values.
Using more decimal places throughout:
ln(3.5)=1.252762968
5001−7001=0.0005714286
Ea=1.252762968×8.314×0.00057142861=1.252762968×8.314×1750≈18227 J mol−1
So Ea≈18.23 kJ mol−1, confirming step 4's result to more decimal places (not a different value).
A therefore rounds to the printed value: A≈1.61 s−1 (both temperature checks, 1.606 and 1.605, round to 1.61 — matching NCERT's printed A=1.61). As a subordinate aside: carrying the fully-precise exponent e−4.3847=0.012468 gives A=1.604, which truncates toward 1.60, but the textbook's printed final is 1.61 and that is the value we report.
The activation energy is Ea≈18.23 kJ mol−1 (printed: 18230.8 J) and the pre-exponential factor is A≈1.61 s−1 (NCERT's printed value).
Method: Arrhenius Equation (Two-Point Form)
This method uses the Arrhenius equation in its logarithmic form to find activation energy (Ea) and the pre-exponential factor (A) from rate constants at two temperatures.
Step 1: Write the Arrhenius equation in two-point form
The standard form is:
k=Ae−Ea/RT
Taking natural logs for two temperatures gives:
lnk1k2=REa(T11−T21)
Where:
- k1=0.02 s−1 at T1=500 K
- k2=0.07 s−1 at T2=700 K
- R=8.314 J mol−1K−1
Step 2: Solve for Ea
Plug in the values:
ln(0.020.07)=8.314Ea(5001−7001)
Calculate the left side:
ln(3.5)≈1.2528
Calculate the temperature difference:
5001−7001=500×700700−500=350000200=35002≈0.0005714
Now:
1.2528=8.314Ea×0.0005714
Ea=0.00057141.2528×8.314
Ea≈0.000571410.416≈18230 J mol−1
Ea≈18.23 kJ mol−1
Step 3: Solve for A using one temperature
Use the original Arrhenius equation at T1=500 K:
k1=Ae−Ea/RT1
0.02=A⋅e−18230/(8.314×500)
Calculate the exponent:
8.314×50018230=415718230≈4.385
So:
e−4.385≈0.0124
Thus:
0.02=A×0.0124
A=0.01240.02≈1.613 s−1
A≈1.61 s−1
Final Answer
| Quantity | Value |
|---|---|
| Ea | ≈18.23 kJ mol−1 |
| A | ≈1.61 s−1 |
Key insight: The two-point form eliminates A first, letting you find Ea directly from the ratio of rate constants. Then substitute back to get A.
Common Mistakes & How to Avoid Them
1. Using the Wrong Form of the Arrhenius Equation
Mistake: Students often pick the wrong version of the Arrhenius equation — either using the logarithmic form incorrectly or mixing up the two-point form.
How to avoid:
Always identify what data you have. Here, you have two temperatures and two rate constants, so you must use the two-point form:
logk1k2=2.303REa(T11−T21)
- Use log10, not ln, unless you adjust the constant.
- R=8.314 J mol−1K−1 — never forget the units.
2. Incorrect Substitution of Temperatures
Mistake: Swapping T1 and T2 in the T11−T21 term, leading to a negative Ea.
How to avoid:
Always assign:
- T1 = lower temperature (500 K)
- T2 = higher temperature (700 K) Then T11−T21 is positive, and Ea comes out positive.
Check:
5001−7001=0.002−0.001428=0.000572 K−1
3. Forgetting to Convert Ea to kJ/mol
Mistake: Leaving Ea in J/mol when the question expects kJ/mol (common in Indian exams).
How to avoid:
After solving, divide by 1000 to express in kJ/mol.
Example: Ea=15000 J/mol→15 kJ/mol
4. Mishandling Units of A
Mistake: Writing A without units or with wrong units.
How to avoid:
A has the same units as k. Since k is in s−1, A is also in s−1.
Final answer format:
A≈1.61 s−1
5. Calculation Errors in Logarithms
Mistake: Miscomputing log0.020.07 or rounding too early.
How to avoid:
- Compute exactly: 0.020.07=3.5
- log103.5≈0.5441 (use log tables or calculator carefully)
- Do not round intermediate steps — keep at least 4 decimal places until the final answer.
6. Using the Wrong Value of R
Mistake: Using R=0.0821 L atm mol−1K−1 (gas constant for PV = nRT) instead of R=8.314 J mol−1K−1.
How to avoid:
For activation energy, always use R=8.314 J mol−1K−1.
7. Forgetting to Calculate A After Finding Ea
Mistake: Stopping after finding Ea and not calculating the pre-exponential factor A.
How to avoid:
Use the single-point Arrhenius equation:
k=Ae−Ea/RT
Rearrange:
A=k⋅eEa/RT
Pick either temperature (say 500 K) and substitute k, Ea, R, T.
Quick Checklist Before Submitting
| Step | What to check |
|---|---|
| ✓ | Two-point form used correctly |
| ✓ | T1<T2 so T11−T21>0 |
| ✓ | R=8.314 J mol−1K−1 |
| ✓ | Ea converted to kJ/mol if needed |
| ✓ | A has same units as k (s−1) |
| ✓ | Logarithms computed accurately |
Final Tip: Practice this exact problem with different numbers until the steps become automatic — the Arrhenius two-point form is a guaranteed exam question in physical chemistry.
- CBSE 2024Set B1 markQ.Write True or False: The unit of rate of reaction is mol lit^-1 sec^-1.
›Reveal solutionSolution
Rate = (change in concentration)/(time), so its unit is mol L^-1 s^-1 (or mol dm^-3 s^-1) — the statement is correct.
Rate of a chemical reaction = -(1/stoichiometric coefficient) x d[reactant]/dt = +(1/stoichiometric coefficient) x d[product]/dt. Since concentration is expressed in mol L^-1 and time in seconds, the rate of reaction has units of mol L^-1 s^-1 (equivalently, mol dm^-3 s^-1).
✓Final answerTrue.
- CBSE 2024Set ANNUAL1 markQ.When does average rate become equal to instantaneous rate?
›Reveal solutionSolution
Average rate is a rate measured over a finite time span; as that span shrinks to zero it becomes the instantaneous rate — so the two are equal in the limit Δt→0.
The average rate of a reaction over an interval Δt=t2−t1 is:
Average rate=−ΔtΔ[R]=−t2−t1[R]2−[R]1
This is the mean rate over that whole time span and can mask how quickly the rate is actually changing within the interval.
The instantaneous rate at a specific time t is the slope of the concentration-vs-time curve at that exact point:
Instantaneous rate=−dtd[R]
Mathematically, the instantaneous rate is defined as the limit of the average rate as the time interval shrinks to zero:
Instantaneous rate=limΔt→0(−ΔtΔ[R])=−dtd[R]
So, when Δt is taken to be extremely small (in the limiting sense, Δt→0), the chord joining the two points on the concentration–time graph becomes the tangent at a single point — and the average rate numerically coincides with the instantaneous rate at that instant.
✓Final answerAverage rate equals instantaneous rate in the limit Δt→0 — i.e. when the time interval over which the rate is measured is made infinitesimally small.
- CBSE 2023Set ANNUAL1 markMCQQ.To express the rate at a particular moment of time we determine the ________.(a) Initial rate(b) Instantaneous rate(c) Average rate(d) Standard rate
›Reveal solutionSolution
The rate 'at a particular moment' (not averaged over an interval) is called the instantaneous rate.
Average rate is calculated over a finite time interval (Delta[R]/Delta t) and changes depending on which interval is chosen. To get the rate AT one specific instant, we let the time interval shrink to zero:
Instantaneous rate = -d[R]/dt (or +d[P]/dt), obtained graphically as the slope of the tangent drawn to the concentration-vs-time curve at that particular time.
✓Final answer(b) Instantaneous rate.
- CBSE 2022Set E1 markMCQQ.The rate of a chemical reaction(a) increases with time(b) decreases with time(c) may increase or decrease with time(d) remains constant with time
›Reveal solutionSolution
Rate depends on reactant concentration; as reactants are consumed, concentration and hence rate fall with time.
For a typical reaction, Rate = k[reactant]^n. As the reaction proceeds the reactant concentration continuously decreases, so the rate also decreases with time (it is maximum at the start and approaches zero near completion).
This is why the initial rate is the highest for most reactions.
✓Final answer(b) decreases with time.
- CBSE 2022Set ANNUAL1 markMCQQ.In the reaction 3A -> 2B, the rate of production of B is +d[B]/dt when the rate of reaction of A is(a) -(1/2) d[A]/dt(b) -(2/3) d[A]/dt(c) +2 d[A]/dt(d) -(3/2) d[A]/dt
›Reveal solutionSolution
For a reaction 3A→2B, the rate of the reaction expressed via each species must be divided by its own stoichiometric coefficient, so rates in terms of A and B are related by the ratio of those coefficients.
Setting up the rate expression: For 3A→2B, the overall rate of reaction is defined uniquely (independent of which species you track) as:
Rate=−31dtd[A]=+21dtd[B]
Solving for d[B]/dt in terms of d[A]/dt:
Given the rate of production of B is +dtd[B], equate:
21dtd[B]=−31dtd[A]
dtd[B]=−32dtd[A]
(Since A is being consumed, d[A]/dt is itself negative, so −32dtd[A] works out to a positive quantity, consistent with B being produced.)
✓Final answer(b) −32dtd[A] — from −31dtd[A]=21dtd[B].
- CBSE 2022Set ANNUAL1 markMCQQ.For a gaseous reaction, the units of rate of reaction are –(a) Latm s⁻¹(b) atm s⁻¹(c) atm mol⁻¹ s⁻¹(d) mol s⁻¹
›Reveal solutionSolution
For gaseous reactions, concentration is expressed as partial pressure, so rate has units of pressure/time.
Rate of reaction = (change in concentration)/(time). For reactions involving gases, concentration is conveniently measured as partial pressure (atm) instead of mol L⁻¹. Hence rate = Δ(pressure)/Δ(time), giving units of atm s⁻¹.
✓Final answeratm s⁻¹ — option (b).
- CBSE 2019Set ANNUAL1 markQ.When does the average rate of a reaction become equal to instantaneous rate?
›Reveal solutionSolution
Average rate is measured over a finite Δt; as that interval is shrunk toward zero, the average rate converges exactly to the instantaneous rate at that moment.
The average rate of a reaction over an interval is −ΔtΔ[R] (or +ΔtΔ[P]), computed using the change in concentration over a finite time interval Δt. The instantaneous rate is the rate at one particular instant, given by the derivative −dtd[R].
As the time interval Δt used for the average is made smaller and smaller (i.e. Δt→0), the average rate over that shrinking interval approaches the slope of the tangent to the concentration-vs-time curve at that point — which is exactly the instantaneous rate. So the two coincide in the limit Δt→0.
✓Final answerThe average rate equals the instantaneous rate in the limit as the time interval Δt approaches zero.
- CBSE 2018Set ANNUAL1 markQ.What is instantaneous rate of reaction?
›Reveal solutionSolution
Instantaneous rate is the rate at one exact moment, found as −d[R]/dt — the slope of the tangent drawn to the concentration-time plot at that instant (Δt → 0).
Whereas the average rate is measured over a finite time interval, the instantaneous rate is the rate of the reaction at one particular instant of time. It is obtained mathematically by making the time interval Δt infinitesimally small (Δt → 0), turning the average-rate expression into a derivative:
Instantaneous rate=limΔt→0(−ΔtΔ[R])=−dtd[R]=dtd[P]
Graphically, if concentration is plotted against time, the instantaneous rate at any chosen time t is given by the slope of the tangent drawn to the curve at that point.
✓Final answerInstantaneous rate =−d[R]/dt — the rate of reaction at one particular instant, given by the slope of the tangent to the concentration-vs-time curve at that instant.
- CBSE 2016Set ANNUAL1 markQ.What is average rate of a reaction?
›Reveal solutionSolution
Average rate = (change in concentration) / (time interval) over a finite interval Δt.
For a reaction R → P, the average rate over the time interval t1 to t2 is
Average rate=−t2−t1[R]2−[R]1=t2−t1[P]2−[P]1=−ΔtΔ[R]=ΔtΔ[P].
A negative sign is used for reactants because their concentration decreases with time, so that the rate (a positive quantity) is obtained. It represents the mean rate over the chosen interval, not the rate at a particular instant (which is the instantaneous rate, obtained by shrinking Δt→0).
✓Final answerAverage rate of reaction =−Δ[Reactant]/Δt=+Δ[Product]/Δt, i.e. the change in concentration of a reactant/product divided by the time taken.
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.