Q.Calculate the magnetic moment of a divalent ion in aqueous solution if its atomic number is 25.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Magnetic Moment Calculation
From a Paperclip to a Magnet: The Intuition
You already know that a magnet can pick up iron nails. But what is actually happening inside that nail when it gets near the magnet? And why does a plastic comb, rubbed on hair, pick up tiny bits of paper — but never iron filings?
The answer lies in magnetization — the process by which a material becomes magnetic.
Think of a piece of iron as a chaotic crowd of tiny compass needles. Each needle is an atomic magnetic moment (a tiny magnet, arising from the spin of electrons). In unmagnetized iron, these needles point in random directions. Their magnetic effects cancel out, so the iron as a whole shows no net magnetism.
Now bring a strong magnet close. Its magnetic field acts like a command: "Line up!" The tiny compass needles inside the iron start rotating, aligning themselves with the external field. The more they align, the stronger the iron's own magnetic field becomes. This alignment is magnetization.
Magnetization is not the same as inducing a current. It is a purely magnetic reorientation of atomic dipoles inside a material.
The Precise Definition
Magnetization (M) is the net magnetic dipole moment per unit volume of a material. It tells you how strongly a material is magnetized — how many tiny atomic magnets are aligned, and in which direction.
If a material has N atoms per unit volume, each with an average magnetic moment μavg, then:
M=Nμavg
The SI unit of M is amperes per metre (A/m). Why? Because a magnetic dipole moment has units of A·m², and dividing by volume (m³) gives A/m.
M=volumetotal magnetic dipole moment
How Magnetization Connects to the Magnetic Field
When a material gets magnetized, it produces its own magnetic field. The total magnetic field B inside the material is the sum of:
- The external applied field H (caused by free currents, like the current in a solenoid)
- The material's response — the magnetization M
The fundamental relation is:
B=μ0(H+M)
where μ0=4π×10−7T⋅m/A is the permeability of free space.
Do not confuse H (magnetic field intensity, or "magnetizing field") with B (magnetic flux density). H is what you apply; M is what the material does; B is the total field you measure.
The Three Kinds of Magnetic Materials
Not all materials respond the same way to an external field. The magnetization M is proportional to H for most materials (at least for small fields):
M=χmH
where χm is the magnetic susceptibility — a dimensionless number that tells you how easily a material magnetizes.
| Material Type | χm | Behaviour | Example |
|---|---|---|---|
| Diamagnetic | Small and negative (≈−10−5) | Weakly repelled by a magnet; M opposes H | Water, copper, bismuth |
| Paramagnetic | Small and positive (≈10−5 to 10−3) | Weakly attracted; M aligns with H | Aluminium, oxygen gas |
| Ferromagnetic | Large and positive (≫1) | Strongly attracted; M can be huge and persists even after H is removed | Iron, nickel, cobalt |
Why this formula?
Magnetic Moment Calculation: Why the Formula Holds
Let's build this from first principles — understanding the why before the formula.
1. What is Magnetic Moment?
A magnetic moment (μ) is a measure of the strength and orientation of a magnet or current loop. It tells us how strongly an object will interact with an external magnetic field.
The core idea: any moving charge creates a magnetic field. A loop of current is like a tiny bar magnet — its magnetic moment quantifies this.
2. The Fundamental Formula: Current Loop
The Setup
Consider a planar loop of wire carrying a steady current I, enclosing an area A.
Why μ=IA?
Step 1: Force on a moving charge
A charge q moving with velocity v in a magnetic field B experiences:
F=q(v×B)
Step 2: Torque on a current loop
For a rectangular loop of sides a and b (A=ab), placed in a uniform B:
- Current I means charge flows. On side of length a, the force magnitude is F=IaB (since I=tq and v=ta).
- These forces on opposite sides form a couple (equal, opposite, not collinear).
- Torque τ=force×perpendicular distance=(IaB)×(bsinθ)
Step 3: Recognize the pattern
τ=I(ab)Bsinθ=IABsinθ
This looks exactly like:
τ=μBsinθ
Comparing, we identify:
μ=IA
Why this works: The torque on a current loop is proportional to the current and the area — this product naturally defines the magnetic moment.
3. For a Single Moving Charge (Orbital Magnetic Moment)
The Setup
An electron of charge −e moves in a circular orbit of radius r with speed v.
Why μ=2evr?
Step 1: Treat orbit as a current loop
- Time for one revolution: T=v2πr
- Current (charge per unit time): I=Te=2πrev
Step 2: Apply μ=IA
- Area of orbit: A=πr2
- So: μ=(2πrev)(πr2)=2evr
Step 3: Express in terms of angular momentum
- Orbital angular momentum: L=mvr
- Therefore: μ=2meL
Why this matters: The magnetic moment is directly proportional to angular momentum. The factor 2me is called the gyromagnetic ratio — it links mechanics to magnetism.
4. For a Solenoid (Many Turns)
The Setup
A solenoid of N turns, length l, carrying current I, cross-sectional area A.
Why μ=NIA? …
The key idea is that for a divalent ion in aqueous solution, the magnetic moment depends only on the number of unpaired electrons, as orbital angular momentum is quenched.
Step 1: Atomic number 25 corresponds to manganese (Mn). The ground state electron configuration is [Ar]3d54s2.
Step 2: For a divalent ion (Mn2+), remove the two 4s electrons first. The configuration becomes [Ar]3d5.
Step 3: In the 3d5 configuration, all five electrons occupy separate orbitals with parallel spins (Hund's rule). This gives n=5 unpaired electrons. …
For a divalent ion with atomic number 25 (Mn²⁺), the magnetic moment is calculated using the spin-only formula μ=n(n+2) where n=5 unpaired electrons, giving μ=35≈5.92 BM.
The key here is to connect atomic number to electronic configuration, then to the number of unpaired electrons in the aqueous ion. Magnetic moment in transition metal ions is almost always determined by the spin-only formula because orbital angular momentum is "quenched" by the surrounding water ligands.
Let’s walk through it.
-
Identify the element and its neutral configuration.
Atomic number 25 is manganese (Mn). The ground state configuration of neutral Mn is:
1s22s22p63s23p64s23d5
Or in condensed form: [Ar]4s23d5.
-
Form the divalent ion (Mn²⁺).
When a transition metal forms a cation, electrons are removed first from the 4s orbital (higher energy than 3d in the ion, despite being filled first in the neutral atom). So Mn²⁺ loses the two 4s electrons:
[Ar]3d5.
-
Count unpaired electrons using Hund’s rule.
The 3d subshell has five orbitals. With five electrons, Hund’s rule says each orbital gets one electron with parallel spins before any pairing occurs. So all five electrons are unpaired.
n=5.
-
Apply the spin-only magnetic moment formula.
For a transition metal ion in solution, the orbital contribution is usually negligible due to interaction with water molecules (ligand field quenching). The magnetic moment is:
μ=n(n+2) BM
Substitute n=5:
μ=5(5+2)=5×7=35.
μ=n(n+2) Bohr magnetons
- Compute the numerical value. …
Method: Spin-Only Magnetic Moment Formula (for 3d transition metal ions in aqueous solution)
For first-row transition metal ions in aqueous solution, orbital angular momentum is quenched (due to ligand field effects), so the magnetic moment depends only on the number of unpaired electrons.
Steps
Step 1: Identify the ion and its electronic configuration
- Atomic number Z=25 → element is Manganese (Mn).
- Divalent ion means loss of 2 electrons: Mn2+.
- Ground state configuration of Mn: [Ar]3d54s2.
- Remove 4s electrons first (as per Aufbau for ions): Mn2+=[Ar]3d5.
Step 2: Determine number of unpaired electrons
- For 3d5 in a weak field (aqueous solution = high-spin), Hund's rule applies: All five d orbitals are singly occupied before pairing.
- Unpaired electrons n=5.
Step 3: Apply the spin-only formula
The magnetic moment μ (in Bohr magnetons, μB) is:
μ=n(n+2) μB …
Common Mistakes in Magnetic Moment Calculation (Atomic Number 25, Divalent Ion)
Mistake 1: Incorrect Electronic Configuration
The error: Students write the neutral-atom configuration (Z=25) as 1s22s22p63s23p64s23d5 correctly, but then remove the two electrons from the 3d orbitals (because 3d filled last), giving a wrong [Ar]4s23d3 for the divalent ion.
Why it's wrong: For transition metal ions, the 4s orbital empties before the 3d orbital — even though 4s fills first in the neutral atom. The correct order of removal is: 4s electrons go first, then 3d.
Correct approach:
- Neutral Mn (Z=25): [Ar]4s23d5
- Mn2+: Remove two electrons from 4s → [Ar]3d5
How to avoid: Remember the mnemonic: "Last filled, first removed" for transition metal ions. Always write the neutral configuration, then strip the outermost (highest n) s-electrons first.
Mistake 2: Wrong Number of Unpaired Electrons
The error: Students count 3 unpaired electrons (thinking 3d5 means 5 electrons paired as 2+2+1) or 7 unpaired electrons (confusing with another element).
Why it's wrong: For 3d5, Hund's rule states that electrons occupy all five d-orbitals singly before pairing. So all 5 electrons are unpaired.
Correct count: 5 unpaired electrons
How to avoid: Draw the d-orbital box diagram:
↑ ↑ ↑ ↑ ↑
dxy dyz dxz dx²-y² dz²
Each arrow is one unpaired electron. Count them — 5 unpaired.
Mistake 3: Using Wrong Formula
The error: Using μ=n(n+2) with n = total number of d-electrons instead of the number of unpaired electrons.
Why it's wrong: In the formula, n = number of unpaired electrons. For Mn2+ (3d5) the two counts happen to coincide (all 5 d-electrons are unpaired), so the error stays hidden — but for an ion like Fe2+ (3d6, only 4 unpaired) the wrong count n=6 gives 6×8=48≈6.93 BM instead of the correct 4×6=24≈4.90 BM.
Correct formula: μ=n(n+2) BM, where n=5
Calculation:
μ=5(5+2)=5×7=35≈5.92 BM
How to avoid: Always write the formula with the definition: "n = number of unpaired electrons" before plugging in.
Mistake 4: Forgetting the Unit
The error: Writing the answer as just "5.92" without units.
Why it's wrong: Magnetic moment has a specific unit — Bohr Magneton (BM). …
Showing the 12 most recent of 15 on this concept.
- CBSE 2026Set ANNUAL1 markQ.Write the formula for calculating 'spin only' magnetic moment.
›Reveal solutionSolution
The spin-only formula estimates a transition metal ion's magnetic moment purely from its number of unpaired electrons, ignoring orbital contribution.
…
- CBSE 2026Set ANNUAL1 markQ.Give one example of a complex having tetrahedral geometry and paramagnetic in nature.
›Reveal solutionSolution
[NiCl4]2− is the standard example of a tetrahedral, paramagnetic complex, arising from sp3 hybridisation of Ni2+ with the weak-field Cl− ligand.
Why [NiCl4]2− fits
Ni has configuration [Ar]3d84s2; in Ni2+, this becomes 3d8. Cl− is a weak-field ligand (low in the spectrochemical series), so it does not force pairing of the 3d electrons. With four ligands and no d-orbital freed by pairing, nickel uses one 4s and three 4p orbitals — sp3 hybridisation — giving a **tetrahedr …
- CBSE 2026Set ANNUAL1 markQ.According to VBT, which one has the highest paramagnetic character? [Cr(H2O)6]3+ or [Fe(H2O)6]2+
›Reveal solutionSolution
Counting unpaired d-electrons for each ion under VBT shows Fe2+ (d6, high-spin, 4 unpaired) is more paramagnetic than Cr3+ (d3, always 3 unpaired).
[Cr(H2O)6]3+
Cr (Z=24) is [Ar]3d54s1; Cr3+ removes 3 electrons to give 3d3. With only 3 electrons for the three t2g orbitals, Hund's rule places one electron in each — t2g3 — giving 3 unpaired electrons, regardless of whether the ligand is weak- or strong-field (there's no way to pair up 3 electrons across 3 orbitals to reduce this further).
[Fe(H2O)6]2+
…
- CBSE 2026Set ANNUAL1 markQ.Write True or False: Value of magnetic moment of a divalent ion in aqueous solution having atomic number 25, will be 5.92 B.M.
›Reveal solutionSolution
Mn2+ has 5 unpaired electrons, giving a spin-only moment of 5.92 B.M., so the statement is true.
Atomic number 25 = manganese, [Ar] 3d5 4s2. The divalent ion Mn2+ = [Ar] 3d5, which has 5 unpaired electrons.
…
- CBSE 2026Set ANNUAL1 markMCQQ.Which one of the following metal ions is likely to have a magnetic moment of 1.73 BM?(a) Fe²⁺(b) Mn²⁺(c) Cr²⁺(d) Cu²⁺
›Reveal solutionSolution
Using μ = √(n(n+2)) BM, 1.73 BM means n = 1 unpaired electron; Cu²⁺ (d⁹) is the only ion with one unpaired electron — option (D).
The spin-only magnetic moment is μ=n(n+2) BM, where n is the number of unpaired electrons. A value of 1.73 BM gives 1(1+2)=3=1.73, so n=1 unpaired electron.
Now count unpaired electrons for each ion:
- Fe2+: 3d6 → 4 unpaired (μ≈4.9 BM). …
- CBSE 2025Set JZ1 markMCQQ.Magnetic moment of a bivalent ion in aqueous solution will be, if its atomic number is 25(a) 1.73 BM(b) 2.83 BM(c) 4.96 BM(d) 5.92 BM
›Reveal solutionSolution
Mn2+ (3d5) has 5 unpaired electrons, so μ=5(5+2)=5.92 BM — option (d).
Concept. The magnetic moment of a transition-metal ion depends only on the number of unpaired d-electrons (n), through the spin-only formula μ=n(n+2) BM.
Step 1 — identify the ion. Atomic number 25 → manganese (Mn), configuration [Ar]3d54s2. A bivalent ion Mn2+ loses the two 4s electrons: Mn2+=[Ar]3d5.
…
- CBSE 2025Set ANNUAL1 markMCQQ.The spin magnetic moment of Co3+ ion is:(a) sqrt(3) BM(b) sqrt(8) BM(c) sqrt(15) BM(d) sqrt(24) BM
›Reveal solutionSolution
Co3+ has the configuration [Ar]3d6; in the high-spin (free-ion) state this places 4 electrons unpaired, giving a spin-only magnetic moment of √(n(n+2)) = √24 BM.
Cobalt (Z = 27) has ground state configuration [Ar]3d7 4s2. Removing 3 electrons to form Co3+ removes the two 4s electrons first and then one 3d electron, giving Co3+: [Ar]3d6.
Filling the five d orbitals with 6 electrons by Hund's rule (maximum multiplicity, i.e., high-spin, as would apply to the free gaseous ion or in a weak field):
↑↓ ↑ ↑ ↑ ↑ → one orbital doubly occupied, four orbitals singly occupied → 4 unpaired electrons (n = 4).
…
- CBSE 2025Set ANNUAL1 markMCQQ.Which of the following is a paramagnetic complex?(a) [Ni(H2O)6]2+(b) [Ni(CO)4](c) [Zn(NH3)4]2+(d) [Co(NH3)6]
›Reveal solutionSolution
Ni2+ (d8) with the weak-field ligand H2O keeps 2 electrons unpaired; the other three complexes all have a d10 or strong-field-paired d-count and are diamagnetic.
[Ni(H₂O)₆]²⁺: Ni²⁺ is d⁸; H₂O is a weak-field ligand and cannot force pairing, so 2 electrons remain unpaired — paramagnetic (octahedral, sp³d² outer-orbital complex).
[Ni(CO)₄]: here nickel is in the zero oxidation state, Ni(0), configuration 3d¹⁰4s⁰ — a completely filled d-subshell regardless of ligand field, so it is diamagnetic (sp³, tetrahedral).
[Zn(NH₃)₄]²⁺: Zn²⁺ is always 3d¹⁰ (fully filled) in its only common oxidation state, so it is diamagnetic (sp³, tetrahedral) irrespective of the ligand.
…
- CBSE 2024Set ANNUAL1 markMCQQ.The magnetic moment of Mn+2 in aqueous solution is –(a) 2.84 B.M(b) 3.87 B.M(c) 4.90 B.M(d) 5.92 B.M
›Reveal solutionSolution
Mn²⁺ has a half-filled d⁵ configuration with 5 unpaired electrons, and the spin-only formula gives a magnetic moment of 5.92 B.M.
Mn2+ has the configuration [Ar]3d5 — a half-filled d-subshell, with all 5 electrons unpaired (by Hund's rule, each of the 5 d-orbitals holds one electron).
Using the spin-only formula:
μ=n(n+2) B.M.,n=5
…
- CBSE 2023Set ANNUAL1 markQ.Calculate the spin only magnetic moment of M2+(aq) ion (Z=27).
›Reveal solutionSolution
Z=27 corresponds to cobalt; Co2+(aq) has the configuration 3d7 with 3 unpaired electrons, giving a spin-only magnetic moment of 15≈3.87 BM.
Identify the ion: Z=27 is cobalt (Co), with ground-state configuration [Ar]3d74s2. Removing 2 electrons (always from 4s first) to form Co2+ gives:
Co2+:[Ar]3d7
Count unpaired electrons: Distributing 7 electrons among the five 3d orbitals following Hund's rule (each orbital singly filled first, before pairing) for the aqua ion (a weak-field, high-spin case):
↑↓ ↑↓ ↑ ↑ ↑
…
- CBSE 2020Set 56/2/11 markMCQQ.Total number of unpaired electrons present in Co3+ (Atomic number = 27) is (A) 2 (B) 7 (C) 3 (D) 5
›Reveal solutionSolution
Cobalt loses three electrons to form Co3+, leaving an electronic configuration of [Ar]3d6. In the d6 configuration, pairing depends on ligand field strength, but the question asks for the ground-state free ion, which follows Hund's rule and has 4 unpaired electrons.
The number of unpaired electrons in a transition metal ion determines its magnetic properties. To find this, we need the electronic configuration of the ion and then apply Hund's rule of maximum multiplicity.
Understanding the Configuration
Cobalt has atomic number 27. The neutral atom's electronic configuration is:
[Ar]3d74s2
When cobalt forms Co3+, it loses three electrons. Electrons are always removed from the outermost shell first—both 4s electrons go first, then one 3d electron:
Co3+:[Ar]3d6
Applying Hund's Rule
The five 3d orbitals can hold up to 10 electrons. With 6 electrons to place, Hund's rule tells us to:
- Maximize unpaired electrons first by placing one electron in each orbital with parallel spin.
- Then pair up any remaining electrons.
Let me show the filling pattern for 3d6:
dxy dyz dzx dx2−y2 dz2 ↑↓ ↑ ↑ ↑ ↑ The first five electrons occupy all five orbitals singly (all spin-up). The sixth electron must pair with one of them.
Result: 4 unpaired electrons and 1 paired set. …
- CBSE 2019Set ANNUAL1 markQ.Calculate the magnetic moment of a divalent ion in aqueous solution if its atomic number is 25.
›Reveal solutionSolution
The divalent ion of element 25 is Mn2+, a 3d5 ion with all five d-orbitals singly occupied; the spin-only formula then gives μ≈5.92 BM.
Element with atomic number 25 is manganese (Mn): [Ar]3d54s2.
Forming the divalent ion Mn2+ removes the two 4s electrons first:
Mn2+: [Ar]3d5
By Hund's rule, all five 3d electrons occupy the five d-orbitals singly (maximum multiplicity), giving n=5 unpaired electrons.
…
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.