Q.Find all points of discontinuity of f, where f is defined by f(x)={x10−1,x2,if x≤1if x>1
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity At A Point — a function is continuous at x=a if limx→af(x)=f(a). For a piecewise function, check the left-hand limit, right-hand limit, and the function value at the break point.
Step 1: Evaluate f(1)
Since x≤1 uses the first piece,
f(1)=110−1=0.
Step 2: Compute left-hand limit as x→1−
Using the same piece:
limx→1−f(x)=limx→1−(x10−1)=110−1=0.
Step 3: Compute right-hand limit as x→1+
Using the second piece:
limx→1+f(x)=limx→1+x2=12=1.
Step 4: Compare …
Each piece is a polynomial, so f is continuous everywhere except possibly at x=1. There the left limit is 0 but the right limit is 1, so f is discontinuous only at x=1.
The function is
f(x)={x10−1,x2,x≤1x>1.
1. Away from x=1. For x<1, f(x)=x10−1 is a polynomial and hence continuous. For x>1, f(x)=x2 is a polynomial and hence continuous. So f is continuous at every point except possibly x=1.
2. At x=1. From the definition (x≤1 branch), f(1)=110−1=0.
- Left-hand limit: x→1−limf(x)=x→1−lim(x10−1)=1−1=0. …
Method: Numerically Verifying Whether Two Polynomial Pieces Agree at Their Boundary
Even when both pieces of a function look like "nice," smooth polynomials, they can still disagree at the point where they meet — this method shows how to check that rigorously rather than by eye.
Steps
Step 1: Pin down f(a) using the correctly-matched piece
Match the boundary value a to whichever inequality includes equality, and substitute into that formula only.
Step 2: Substitute directly into each side's formula to get both one-sided limits
limx→a−f(x)=(left formula evaluated at a),limx→a+f(x)=(right formula evaluated at a)
Direct substitution is valid here because polynomials have no gaps or jumps on their own open interval.
Step 3: Compare the two numeric results, not the formulas themselves …
Common Mistakes
Mistake 1: Assuming two smooth polynomial pieces automatically meet at the same height at their boundary
Why it's wrong: both x10−1 and x2 are well-behaved polynomials, but being individually smooth says nothing about whether they agree at the shared point x=1 — here they genuinely give different values (0 versus 1). Correct approach: always substitute and compute the actual numbers on both sides rather than assuming agreement from how "nice" each piece looks. …
Showing the 12 most recent of 20 on this concept.
- CBSE 2025Set 65/4/11 markMCQQ.The function f defined by f(x)={x,5,if x≤1if x>1 is not continuous at : (A) x=0 (B) x=1 (C) x=2 (D) x=5
›Reveal solutionSolution
The function has a jump at x=1 because the left-hand limit (1) and the right-hand limit (5) do not match, so it is discontinuous only at x=1. The correct option is (B).
Continuity at a point means three things must hold: the function is defined there, the limit exists there, and the limit equals the function value. For a piecewise function, the only place where things can go wrong is at the boundary between the pieces — here, at x=1. Everywhere else, the function is just a simple rule (either x or the constant 5), so it's automatically continuous.
Let’s check each candidate point.
-
At x=0
For x≤1, the rule is f(x)=x. Since 0≤1, we have f(0)=0.
The left-hand limit: limx→0−f(x)=limx→0−x=0.
The right-hand limit: limx→0+f(x)=limx→0+x=0 (because near 0, x is still ≤1).
So the limit exists and equals 0, which matches f(0). Continuous here.
-
At x=1 — the critical boundary
- Left-hand limit: as x approaches 1 from below, x≤1, so f(x)=x. Hence
limx→1−f(x)=limx→1−x=1.
- Right-hand limit: as x approaches 1 from above, x>1, so f(x)=5. Hence
limx→1+f(x)=5.
- The left and right limits are different (1=5), so the two-sided limit does not exist.
- The function value is f(1)=1 (since 1≤1). …
-
- CBSE 2024Set 65/1/11 markMCQQ.For the function f(x)={x2+3,1,x=0x=0, which of the following statements is true? (A) f(x) is continuous and differentiable for all x∈R. (B) f(x) is continuous for all x∈R. (C) f(x) is continuous and differentiable for all x∈R−{0}. (D) f(x) is discontinuous at infinite points.
›Reveal solutionSolution
The function is a parabola with a hole at x=0 and a single isolated point at (0,1). Because the limit as x→0 is 3, not 1, the function is discontinuous at x=0 — but it is continuous and differentiable everywhere else. The correct option is (C).
The key to this problem is understanding what continuity and differentiability mean at a point, and then checking the one point where the definition changes.
Continuity at a point x=a requires three things to match: the function value f(a), the left-hand limit limx→a−f(x), and the right-hand limit limx→a+f(x). If any one of these differs, the function is discontinuous there.
Differentiability at a point requires continuity first — and then the left and right derivatives must also be equal. So if a function is discontinuous at a point, it cannot be differentiable there.
Here, the function is defined by two pieces: for every x except 0, it behaves like x2+3 (a smooth parabola shifted up by 3). At x=0 alone, it jumps to the value 1. That single point is the only place where anything unusual can happen.
Let’s check systematically.
- Check continuity at x=0 For x=0, f(x)=x2+3. As x approaches 0 from either side, x2 approaches 0, so
limx→0f(x)=02+3=3.
But f(0)=1. Since 3=1, the limit does not equal the function value.
Watch outA common mistake is to think that because the formula x2+3 is continuous everywhere, the whole function is continuous. But the definition at x=0 overrides that — the function is piecewise-defined, and the value at the breakpoint must match the limit.
Hence f is discontinuous at x=0.
-
Check continuity for x=0
For any a=0, near a the function is simply f(x)=x2+3, which is a polynomial. Polynomials are continuous everywhere. So f is continuous at every x=0.
-
Check differentiability at x=0 …
- CBSE 2026Set 65/3/11 markMCQQ.The value of k for which the function f(x)={x2sinx1,k(x+1),x=0x=0 is a continuous function, is: (A) 41 (B) 2 (C) 21 (D) 0
›Reveal solutionSolution
For continuity at x=0, the limit of x2sinx1 as x→0 must equal the function value k(0+1)=k. Since the limit is 0, we need k=0.
A function is continuous at a point when three conditions align: the function is defined there, the limit exists as we approach that point, and crucially, the limit equals the function's value at that point. This problem tests whether you can recognize that continuity at x=0 creates a bridge between two different expressions.
The function behaves as x2sinx1 everywhere except at zero, where it suddenly switches to k(x+1). At x=0, this second piece gives us f(0)=k(0+1)=k. For continuity, we need:
limx→0f(x)=f(0)
Since we approach zero from the region where x=0, the relevant limit is:
limx→0x2sinx1=k
Let me find this limit.
-
Recognize the bounded oscillation
The sine function satisfies −1≤sinx1≤1 for all x=0, no matter how wildly x1 oscillates as x→0.
-
Apply the squeeze theorem
Multiplying the inequality by x2 (which is always non-negative):
−x2≤x2sinx1≤x2
- Evaluate the bounding limits As x→0:
limx→0(−x2)=0andlimx→0x2=0
- Conclude via the squeeze theorem …
-
- CBSE 2023Set 65/1/11 markMCQQ.The value of k for which f(x)={3x+5,kx2,x≥2x<2 is a continuous function, is : (A) −411 (B) 114 (C) 11 (D) 411
›Reveal solutionSolution
For a piecewise function to be continuous at the join point x=2, the left-hand limit and right-hand limit must equal the function value at x=2. Equating k(2)2 with 3(2)+5 gives 4k=11, so k=411. The correct option is (D).
The Core Idea: Continuity at a Point
A function is continuous at a point if three things match perfectly — the value from the left, the value from the right, and the actual function value at that point. For a piecewise function like this one, the only place where things could break is at the boundary where the formula changes, which is x=2.
Think of it like two roads meeting at a junction. For a smooth ride, the elevation of the left road as you approach the junction must exactly match the elevation of the right road as you approach from the other side — and that elevation must also be the height of the junction itself. If they don't match, there's a jump, and the function is discontinuous.
Here, the left piece (x<2) uses kx2, and the right piece (x≥2) uses 3x+5. The function value at x=2 is given by the right piece (since x≥2 includes 2). So we need the left-hand limit to equal that value.
Step-by-Step Solution
1. Find the function value at x=2.
Since x=2 falls in the case x≥2, we use f(x)=3x+5.
f(2)=3(2)+5=6+5=11
2. Find the left-hand limit as x→2−.
For x<2, the function is f(x)=kx2. As x approaches 2 from the left, we simply substitute x=2 into this expression (since kx2 is a polynomial and polynomials are continuous everywhere).
limx→2−f(x)=limx→2−kx2=k(2)2=4k
3. Find the right-hand limit as x→2+.
For x>2, the function is f(x)=3x+5. Again, this is a polynomial, so the limit is just the value at x=2.
limx→2+f(x)=limx→2+(3x+5)=3(2)+5=11
4. Apply the continuity condition.
For f to be continuous at x=2, we need:
limx→2−f(x)=limx→2+f(x)=f(2) …
- CBSE 20241 markMCQQ.The value of k, for which f(x)={3x+2π3cosx+sinx,k,x=−3πx=−3π is continuous at x=−3π, is : (A) 32 (B) −32 (C) 23 (D) 6 ∼∼∼
›Reveal solutionSolution
Continuity requires k=limx→−π/3f(x). The quotient is a 00 form at x=−3π, and the limit evaluates to 32 — option (A).
For f to be continuous at x=−3π, we need
k=limx→−π/33(x+3π)3cosx+sinx.
Simplify the numerator. Writing it as a single sine:
3cosx+sinx=2(23cosx+21sinx)=2sin(x+3π). …
- CBSE 2026Set ANNUAL1 markQ.Prove that the function f(x) = 5x - 3 is continuous at x = -3.
›Reveal solutionSolution
A function f is continuous at x=a if x→alimf(x)=f(a); check this directly for the linear function f(x)=5x−3 at a=−3.
Concept: f is continuous at x=a when: (i) f(a) is defined, (ii) x→alimf(x) exists, and (iii) the two are equal.
Working:
f(−3)=5(−3)−3=−15−3=−18
limx→−3f(x)=limx→−3(5x−3)=5(−3)−3=−18
…
- CBSE 2025Set IX1 markQ.Prove that the function f(x)=∣x∣, is continuous at x=0.
›Reveal solutionSolution
Left limit, right limit and the value all equal 0, so ∣x∣ is continuous at 0.
Concept. f is continuous at x=a iff x→a−limf(x)=x→a+limf(x)=f(a).
Here f(x)=∣x∣={−x,x,x<0x≥0
- Left-hand limit: x→0−limf(x)=x→0−lim(−x)=0.
- Right-hand limit: x→0+limf(x)=x→0+limx=0. …
- CBSE 2025Set ANNUAL1 markMCQQ.The function f(x)=∣x∣−∣x+1∣ is:(a) continuous at x=0 as well as at x=−1(b) continuous at x=−1 but not at x=0(c) discontinuous at x=0 as well as at x=−1(d) continuous at x=0 but not at x=−1
›Reveal solutionSolution
∣x∣ and ∣x+1∣ are each continuous everywhere, and the difference of two continuous functions is continuous.
g(x)=∣x∣ is continuous on all of R, and h(x)=∣x+1∣ (a shifted absolute value) is also continuous on all of R. Since f(x)=g(x)−h(x) is a difference of two functions continuous eve …
- CBSE 2025Set ANNUAL1 markQ.Check the continuity of the function f given by f(x)=2x+3 at x=1. OR Find the value of k, so that the function f(x)={kx2,3,if x≤2if x>2 is continuous at x=2.
›Reveal solutionSolution
A function is continuous at a point when its limit there equals its value; check both.
Here f(x)=2x+3 (a polynomial), and we test x=1.
Value: f(1)=2(1)+3=5.
Limit: x→1lim(2x+3)=2(1)+3=5.
Since x→1limf(x)=5=f(1), the function is continuous at x=1.
…
- CBSE 2024Set EX1 markQ.Show that the function f(x)={x+21if x=0if x=0 is not continuous at x=0.
›Reveal solutionSolution
The limit as x→0 is 2 (from x+2), but the defined value is f(0)=1. Limit = value, so f is discontinuous at 0.
Concept. f is continuous at x=0 iff x→0limf(x)=f(0).
Limit. For x=0, f(x)=x+2, so
limx→0f(x)=limx→0(x+2)=0+2=2.
Value. By definition f(0)=1.
…
- CBSE 2024Set ANNUAL1 markQ.Examine the continuity of the function f(x)=5x−3 at x=5.
›Reveal solutionSolution
Check that the limit at x=5 equals the function value there.
Given f(x)=5x−3.
Function value: f(5)=5(5)−3=25−3=22.
Limit: x→5limf(x)=x→5lim(5x−3)=5(5)−3=22.
Since
limx→5f(x)=22=f(5), …
- CBSE 2024Set ANNUAL1 markQ.When is a function f(x) said to be continuous at x=c ?
›Reveal solutionSolution
Standard definition: left-hand limit = right-hand limit = function value at that point.
A function f(x) is said to be continuous at x=c if:
limx→c−f(x)=limx→c+f(x)=f(c) …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.