Q.(a) It is given that the function f(x)=x4−62x2+ax+9 attains a local maximum value at x=1. Find the value of a, hence obtain all other points where the given function f(x) attains local maximum or local minimum values.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Part (a)Concept understanding — Local Maximum Condition
Local Maximum Condition
Imagine hiking in a mountain range. You reach a point where, for a few steps in any direction, the ground drops away. You may not be the highest peak in the whole range, but right here every step goes downhill. That's a local maximum: a point higher than all nearby points.
The Intuition First
On a smooth, wavy curve, a local maximum is a "hilltop" — a point where the function peaks, then falls on both sides. Zoom in and the values just to the left and right are both lower.
"Local" means "in a small neighbourhood." The function might have higher values elsewhere (a global maximum), but that doesn't matter — a local maximum is king of its own tiny kingdom.
The Precise Mathematical Statement
Let f be a real-valued function on a domain D⊆R. A point c∈D is a local maximum if there exists some δ>0 such that for every x in the domain within distance δ of c:
f(x)≤f(c)
That is, on some open interval (c−δ,c+δ), f(c) is the largest value.
The inequality is f(x)≤f(c), not f(x)<f(c). If equality holds for some x=c (a flat plateau), it's still a local maximum — just not a strict one.
The First Derivative Test
If f is differentiable at c and c is a local maximum, then:
f′(c)=0
This is the critical point condition — the tangent is horizontal. But f′(c)=0 is necessary, not sufficient: a horizontal tangent could also be a local minimum or a saddle point (like f(x)=x3 at x=0).
A common mistake: assuming f′(c)=0 guarantees a local extremum. It does not. Check the sign change of the derivative around c, or use the second derivative test.
The Second Derivative Test
If f′(c)=0 and f′′(c)<0, then c is a local maximum: a negative second derivative means f is concave down at c — curving down like an upside-down bowl. If f′′(c)>0, it's a local minimum. If f′′(c)=0, the test is inconclusive.
A Concrete Example
Consider f(x)=−x2+4x−3. …
Part (b)Concept understanding — Optimization Word Problem
Optimization Word Problems
Imagine planning a garden with 40 metres of fencing and wanting the largest rectangular area. A long, thin rectangle wastes space; a square feels roomier; somewhere in between lies the best shape. That is an optimisation problem — a fixed resource and a quantity to make as large (or as small) as possible.
Every optimisation word problem has the same skeleton: the best outcome — maximum area, minimum cost, largest volume, shortest time — under a constraint — limited material, a fixed budget, a given perimeter.
The Plan of Attack
The problem gives you a story, not a graph. Your job is to turn it into a single-variable function and find its peak or valley:
- Name the quantity to optimise — call it Q, and write it using variables.
- Find the constraint — a relation between those variables (e.g. "perimeter =40").
- Reduce to one variable — use the constraint to eliminate the rest.
- Differentiate — solve Q′(x)=0 to find the critical points.
- Confirm — use Q′′(x)<0 for a maximum or Q′′(x)>0 for a minimum.
- Answer the question asked — give the actual dimensions/cost, not just x.
In board exams these problems almost always reduce to a quadratic or cubic. Once Q(x) is written, the calculus is mechanical.
The Garden, Worked
40 m of fencing encloses a rectangle; maximise the area.
- Objective: A=lw.
- Constraint: 2l+2w=40, so l+w=20.
- Reduce: w=20−l, giving A(l)=l(20−l)=20l−l2.
- Differentiate: A′(l)=20−2l=0⟹l=10.
- Confirm: A′′(l)=−2<0, a maximum.
So l=w=10 m — a 10 m × 10 m square.
A common slip: solving A′(l)=0 and stopping. Always check max vs min, and answer in the units asked.
The Common Families
| Problem type | Typical objective | Typical constraint |
|--------------|-------------------|--------------------| …
Part (a)
f(x)=x4−62x2+ax+9, f′(x)=4x3−124x+a. Local max at x=1⇒f′(1)=0:
4−124+a=0⇒a=120.
Then f′(x)=4(x3−31x+30)=4(x−1)(x+6)(x−5), so critical points x=1,−6,5. …
Part (a): f′(1)=0 gives a=120; the second derivative test then shows a local maximum at x=1 and local minima at x=−6 and x=5. Part (b): the maximum-volume cylinder comes from a 100 cm×50 cm sheet rolled along the 100 cm side.
Part (a)
1. Use the local-maximum condition. Differentiate:
f′(x)=4x3−124x+a.
A local maximum at x=1 forces f′(1)=0:
4(1)−124(1)+a=0 ⇒ a=120.
So f(x)=x4−62x2+120x+9.
2. Find all critical points. Set f′(x)=0:
4x3−124x+120=0 ⇒ x3−31x+30=0.
Since x=1 is a root, factor:
x3−31x+30=(x−1)(x2+x−30)=(x−1)(x+6)(x−5).
Critical points: x=1, x=−6, x=5.
3. Classify with the second derivative f′′(x)=12x2−124:
- f′′(1)=12−124=−112<0⇒ local maximum at x=1 (matches the given condition).
- f′′(−6)=432−124=308>0⇒ local minimum at x=−6. …
- CBSE 2026Set 65/2/11 markMCQQ.For f(x)=x+x1 (x=0) (A) local maximum value is 2 (B) local minimum value is −2 (C) local maximum value is −2 (D) local minimum value < local maximum value
›Reveal solutionSolution
The function f(x)=x+x1 has a local maximum of −2 at x=−1 and a local minimum of 2 at x=1; the local minimum exceeds the local maximum.
Why this function behaves the way it does
The function f(x)=x+x1 is defined everywhere except at x=0, which splits the domain into two disconnected pieces: x<0 and x>0. On each piece the function can have its own local extrema. The reciprocal term x1 dominates when ∣x∣ is small and the linear term x dominates when ∣x∣ is large, creating a tug-of-war that produces turning points.
To find extrema we look for where the rate of change vanishes, then check whether each critical point is a maximum or minimum.
Finding and classifying the critical points
- Compute the first derivative:
f′(x)=1−x21
- Set f′(x)=0 to locate critical points:
1−x21=0⟹x21=1⟹x2=1
So x=1 or x=−1.
- Use the second derivative to classify each critical point:
f′′(x)=x32
At x=1:
f′′(1)=132=2>0
The function is concave up, so x=1 is a local minimum.
At x=−1:
f′′(−1)=(−1)32=−2<0
The function is concave down, so x=−1 is a local maximum.
-
Evaluate f at each critical point:
At x=1:
f(1)=1+11=2
At x=−1:
f(−1)=−1+−11=−1−1=−2 …
- CBSE 2026Set ANNUAL1 markQ.(Continuing the aluminium-box case study of Q.38) What will be the dimensions of the largest box?
›Reveal solutionSolution
Substitute the optimal square side x=32 m (found by maximising the volume function) into the length, breadth and height expressions.
From the case study, cutting a square of side x from each corner of the 3 m×8 m sheet and folding up the sides gives a box of:
- Length =(8−2x) m
- Breadth =(3−2x) m
- Height =x m
Maximising V(x)=x(3−2x)(8−2x)=4x3−22x2+24x using V′(x)=12x2−44x+24=0 (i.e. 3x2−11x+6=0) gives roots x=3 or x=32. Since 0<x<1.5 is required for the box to be valid, the admissible root is x=32, and V′′(32)=−28<0 confirms this is the maximum.
Substituting x=32:
Length=8−2(32)=8−34=320 m …
- CBSE 2026Set ANNUAL1 markQ.(Continuing the aluminium-box case study of Q.38) What will be the side of the square removed to form the largest box?
›Reveal solutionSolution
The optimal square side is the critical point of the volume function that lies in the valid domain and satisfies the second-derivative maximum test.
For a square of side x removed from each corner of the 3 m×8 m sheet, the box volume is:
V(x)=x(3−2x)(8−2x)=4x3−22x2+24x,0<x<1.5
Differentiating and setting V′(x)=0:
V′(x)=12x2−44x+24=0⟹3x2−11x+6=0
x=611±121−72=611±7⟹x=3 or x=32
Since the breadth (3−2x) must stay positive, only x<1.5 is valid, so x=3 is rejected and x=32 is the only admissible critical point.
Confirming it is a maximum: …
- CBSE 2025Set ANNUAL1 markQ.A gardener plans to plant flowers in a rectangular flower bed in such a way that a rectangle is inscribed in the semi-circular field (as shown in the figure). Radius of the semi-circular field is 30 m. Let the length of the rectangle be PQ = x m. Based on above information answer the following: What will be the breadth of the rectangular flower bed in terms of x?
›Reveal solutionSolution
The rectangle's top corners lie on the semicircle of radius 30, so the Pythagorean relation between half the length and the breadth gives the breadth as a function of x.
Place the centre O of the semicircle at the origin, with the diameter along the x-axis. Since the rectangle PQRS is symmetric about O with top side PQ=x, the top corners P,Q are at horizontal distance x/2 from O. Let the breadth (height of the rectangle) be b. …
- CBSE 2025Set ANNUAL1 markQ.A gardener plans to plant flowers in a rectangular flower bed in such a way that a rectangle is inscribed in the semi-circular field (as shown in the figure). Radius of the semi-circular field is 30 m. Let the length of the rectangle be PQ = x m. Based on above information answer the following: What will be the area of rectangular region as a function of x?
›Reveal solutionSolution
Area = length × breadth, using the breadth found in terms of x.
The rectangle has length PQ=x and breadth b=900−x2/4 (from the semicircle constraint). So the area is …
- CBSE 2025Set ANNUAL1 markQ.A gardener plans to plant flowers in a rectangular flower bed in such a way that a rectangle is inscribed in the semi-circular field (as shown in the figure). Radius of the semi-circular field is 30 m. Let the length of the rectangle be PQ = x m. Based on above information answer the following: Gardener wants maximum area for the rectangular flower bed. For this to happen, what will be the value of x?
›Reveal solutionSolution
Maximize A(x)2 (equivalent and algebraically simpler) by setting its derivative to zero.
From A(x)=x900−x2/4, consider A2=x2(900−4x2)=900x2−4x4 (maximizing A2 maximizes A since A≥0).
dxd(A2)=1800x−x3=x(1800−x2)
Setting this to zero: x=0 (rejected, gives zero area) or x2=1800⇒x=1800=302.
…
- CBSE 2025Set ANNUAL1 markQ.A gardener plans to plant flowers in a rectangular flower bed in such a way that a rectangle is inscribed in the semi-circular field (as shown in the figure). Radius of the semi-circular field is 30 m. Let the length of the rectangle be PQ = x m. Based on above information answer the following: What will be the area of remaining field (in sq. m) after having the flower bed of maximum area?
›Reveal solutionSolution
Subtract the maximum rectangle area from the total semicircular field area.
Total area of the semicircular field: 21πr2=21π(30)2=450π sq. m.
At maximum, x=302, so breadth b=900−4(302)2=900−41800=900−450=450=152.
…
- CBSE 2024Set ANNUAL1 markQ.[Case study] Let a cone be inscribed in a sphere of radius R. The height and radius of the cone are h and r respectively; x denotes the distance from the sphere's centre O to the centre of the cone's base. Write the relation between r and R in terms of x.
›Reveal solutionSolution
r2=R2−x2.
From the figure, O is the sphere's centre, C is the centre of the cone's circular base, OC=x, CA=r (radius of the cone's base), and OA=R (a radius of the sphere, since A lies on the sphere).
…
- CBSE 2024Set ANNUAL1 markQ.[Case study, same setup as above — cone of height h, radius r inscribed in a sphere of radius R, with x the distance from the sphere's centre to the cone's base] Write the volume V of the cone in terms of R and x.
›Reveal solutionSolution
V=3π(R+x)2(R−x).
From the figure, the cone's height is h=R+x (from the base at C up to the apex D at the top of the sphere), and from the previous part, r2=R2−x2.
Volume of a cone: V=31πr2h. …
- CBSE 2020Set ANNUAL1 markMCQQ.f(x)=x3−3x+4 has a maxima at x is equal to:(a) −1(b) 1(c) 0(d) None of these
›Reveal solutionSolution
Using the second derivative test on f(x)=x3−3x+4, x=−1 gives a maximum.
f′(x)=3x2−3=0⇒x2=1⇒x=±1
f′′(x)=6x
…
- CBSE 2019Set HE1 markQ.Write the answer in one word/sentence: The max. value of x1/x is ______.
›Reveal solutionSolution
Maximise f(x)=x1/x using logarithmic differentiation; the maximum occurs at x=e, giving e1/e.
Let y=x1/x (x>0). Take log: lny=xlnx.
Differentiate w.r.t. x: y1dxdy=x21−lnx, so dxdy=y⋅x21−lnx.
…
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.