Q.Classify the following measures as scalars and vectors.
Concept understanding — Vector Magnitude Properties
Vector Magnitude Properties
An arrow has a direction and a length. That length — the straight-line distance from tail to tip — is the magnitude of the vector, written ∣v∣ or ∥v∥. It is always non-negative and tells you how much of something there is, ignoring direction.
Definition
Magnitude is the distance from the origin to the point the vector reaches — the Pythagorean theorem in n dimensions:
∣v∣=x2+y2(2D),∣v∣=x2+y2+z2(3D).
The four key properties
1. Non-negativity.
∣v∣≥0,∣v∣=0⟺v=0.
A length is never negative, and only the zero vector has zero length.
2. Scaling.
∣kv∣=∣k∣∣v∣.
Stretching a vector by k multiplies its length by ∣k∣ — the absolute value appears because a negative k flips direction but the length still grows by ∣k∣. E.g. if ∣v∣=3, then ∣−2v∣=2×3=6.
3. Triangle inequality.
∣u+v∣≤∣u∣+∣v∣.
The direct path is never longer than going the long way: the straight line from A to C is at most the distance A→B→C. Equality holds only when u and v point in exactly the same direction.
4. Dot-product relation.
∣v∣2=v⋅v.
The squared length equals the vector's dot product with itself, since v⋅v=x2+y2+z2. This is the workhorse in proofs and in physics (kinetic energy 21m∣v∣2).
Do not assume ∣u+v∣=∣u∣+∣v∣. That holds only when the vectors are parallel and same-sense; otherwise the left side is strictly smaller.
Two reflexes save time: seeing ∣u+v∣, think triangle inequality; seeing ∣kv∣, factor out ∣k∣. Use property 4 to turn a magnitude question into a dot-product computation.
The four core magnitude properties covered here — non-negativity, scaling, the triangle inequality, and the dot-product relation — are all part of the CBSE Class 12 Vector Algebra chapter and appear regularly in "magnitude of a vector properties and formula" search queries. These same properties are used to prove vector inequalities in JEE Main and JEE Advanced vector algebra problems.
Rule: a scalar has magnitude only; a vector has magnitude and a direction.
- 10 kg — mass → scalar
- 2 metres north-west — has a direction → vector
- 40∘ — a bare angle → scalar
- 40 watt — power → scalar
- 10−19 coulomb — electric charge → scalar
- 20 m/s2 — acceleration, a directed quantity → vector
✓Final answer
Scalars: (i), (iii), (iv), (v). Vectors: (ii) and (vi).
Scalars have magnitude only, vectors also have direction: (i) scalar,
(ii) vector,
(iii) scalar,
(iv) scalar,
(v) scalar,
(vi) vector.
The test
For each measure ask: does a direction belong to it? If yes, it is a vector; if the number-with-unit is complete on its own, it is a scalar.
- 10 kg — mass, purely a magnitude. Scalar.
- 2 metres north-west — a length together with a stated direction (north-west); a displacement. Vector.
- 40∘ — an angle; just a number of degrees with no direction of its own. Scalar.
- 40 watt — power, the rate of doing work; magnitude only. Scalar.
- 10−19 coulomb — electric charge; a scalar (its +/− sign is polarity, not a spatial direction). Scalar.
- 20 m/s2 — acceleration, which is defined as a vector: it always acts in a definite direction (that of the net force). Vector.
A + or − sign (as with charge or temperature) is not a direction and does not make a quantity a vector. A vector needs a genuine spatial direction such as north or "along the x-axis."
Scalars: (i), (iii), (iv), (v). Vectors: (ii) and (vi).
Method: Classifying a quantity as scalar or vector
Use this for any "classify as scalar/vector" question — decide by whether a genuine spatial direction belongs to the quantity.
Steps
Step 1: Ask the one diagnostic question
Does the quantity need a direction in space to be fully specified, or is a number-with-unit complete on its own?
- Direction required ⇒ vector.
- Magnitude alone suffices ⇒ scalar.
Step 2: Separate a sign from a direction
A +/− sign (charge polarity, a temperature below zero) is not a spatial direction. Such quantities stay scalars.
Step 3: Watch the physics of each item
Displacement, velocity, acceleration and force are directed (vectors); mass, time, power, charge, energy/work, angle and distance are not (scalars). Apply the test item by item rather than guessing from the unit alone.
Common Mistakes
Mistake 1: Calling electric charge a vector because it can be negative
Why it's wrong: the sign of a charge is polarity, not a direction in space. Correct approach: charge is a scalar; only a genuine spatial direction (like "north-west") makes a quantity a vector.
Mistake 2: Treating an angle like a direction
Why it's wrong: "40∘" is just a magnitude of rotation with no direction of its own, so it is a scalar. Correct approach: classify a bare angle as scalar.
Mistake 3: Overlooking that acceleration is a vector
Why it's wrong: "20 m/s2" always acts in the direction of the net force, so it is a vector even when written as a bare number. Correct approach: recall acceleration, like velocity and force, is directed.
Showing the 12 most recent of 29 on this concept.
- CBSE 2026Set 65/2/11 markMCQQ.If ∣a∣=5 and −2≤λ≤1, then the sum of greatest and the smallest value of ∣λa∣ is (A) −5 (B) 5 (C) 10 (D) 15
›Reveal solutionSolution
Scalar multiplication scales a vector's magnitude by the absolute value of the scalar; since ∣λa∣=∣λ∣⋅∣a∣, we find the extreme values of ∣λ∣ over [−2,1] and multiply by 5.
When you multiply a vector by a scalar, the magnitude of the resulting vector depends only on the absolute value of that scalar. This is because direction reversals (negative scalars) don't affect length—they just flip the arrow. The fundamental property is:
∣λa∣=∣λ∣⋅∣a∣
Given ∣a∣=5, we have ∣λa∣=5∣λ∣. The problem now reduces to finding the maximum and minimum values of ∣λ∣ as λ ranges over [−2,1].
Finding the extreme values of ∣λ∣:
-
Understand the absolute value function on the interval. For λ∈[−2,1], the function ∣λ∣ equals −λ when λ<0 and equals λ when λ≥0. The graph is V-shaped with its vertex at λ=0.
-
Identify the minimum. The absolute value ∣λ∣ is smallest at λ=0, where ∣λ∣=0. Therefore, the minimum value of ∣λa∣ is 5⋅0=0.
-
Identify the maximum. Since ∣λ∣ increases as we move away from zero in either direction, we check the endpoints of the interval:
- At λ=−2: ∣λ∣=∣−2∣=2
- At λ=1: ∣λ∣=∣1∣=1
The maximum occurs at λ=−2, giving ∣λ∣=2. Therefore, the maximum value of ∣λa∣ is 5⋅2=10.
TipFor any interval containing zero, the minimum of ∣λ∣ is always 0. The maximum is the larger of the absolute values of the endpoints.
- Compute the sum. The greatest value is 10, the smallest is 0, so their sum is 10+0=10.
✓Final answerThe sum of the greatest and smallest values is 10, so the correct option is (C).
-
- CBSE 2026Set 65/3/11 markMCQQ.For any two vectors a and b, which of the following statements is always true? (A) a⋅b≤∣a∣∣b∣ (B) ∣a+b∣≥∣a∣+∣b∣ (C) ∣a−b∣=∣a∣−∣b∣ (D) ∣a×b∣≥∣a∣∣b∣
›Reveal solutionSolution
The dot product satisfies a⋅b=∣a∣∣b∣cosθ, and since cosθ≤1, we always have a⋅b≤∣a∣∣b∣. The correct option is (A).
The key here is to recall the geometric definitions of the dot product and cross product, and the triangle inequality for vector addition. Each option claims an inequality or equality that must hold for any two vectors — so we test each against the general formulas.
1. Option (A): a⋅b≤∣a∣∣b∣
The dot product is defined as a⋅b=∣a∣∣b∣cosθ, where θ is the angle between the vectors. Since cosθ ranges from −1 to 1, the product ∣a∣∣b∣cosθ can be as large as ∣a∣∣b∣ (when cosθ=1) and as small as −∣a∣∣b∣ (when cosθ=−1). Therefore, a⋅b≤∣a∣∣b∣ is always true — the dot product never exceeds the product of magnitudes.
TipThe inequality a⋅b≤∣a∣∣b∣ is actually a form of the Cauchy–Schwarz inequality, which holds for any inner product space.
2. Option (B): ∣a+b∣≥∣a∣+∣b∣
This is the reverse of the triangle inequality. The actual triangle inequality states ∣a+b∣≤∣a∣+∣b∣, with equality only when the vectors point in the same direction. So the given statement is false — for example, take a=(1,0) and b=(−1,0); then ∣a+b∣=0, which is not ≥2.
3. Option (C): ∣a−b∣=∣a∣−∣b∣
This would require the vectors to be parallel and pointing in the same direction, with ∣a∣≥∣b∣. In general, ∣a−b∣ depends on the angle between them. For instance, if a=(1,0) and b=(0,1), then ∣a−b∣=2, but ∣a∣−∣b∣=0. So this is not always true.
4. Option (D): ∣a×b∣≥∣a∣∣b∣
The magnitude of the cross product is ∣a×b∣=∣a∣∣b∣∣sinθ∣. Since ∣sinθ∣≤1, we have ∣a×b∣≤∣a∣∣b∣, not greater than or equal. So this is false — equality occurs only when sinθ=1 (vectors perpendicular), but the inequality sign is reversed.
Watch outA common mistake is to confuse the dot product inequality with the cross product one. Remember: dot uses cosθ (bounded above by 1), cross uses sinθ (also bounded above by 1), so both products are at most the product of magnitudes — but the dot product can be negative, while the cross product magnitude is always non-negative.
Thus, only option (A) holds for all vectors.
✓Final answerThe correct option is (A), because a⋅b=∣a∣∣b∣cosθ≤∣a∣∣b∣ always.
- CBSE 2026Set CX1 markQ.If for a unit vector a, (x−a)⋅(x+a)=12, then find ∣x∣.
›Reveal solutionSolution
The dot product expands to ∣x∣2−∣a∣2=12; with a unit a this gives ∣x∣=13.
Concept: For any vectors, (p−q)⋅(p+q)=p⋅p−q⋅q=∣p∣2−∣q∣2 (the cross terms cancel).
(x−a)⋅(x+a)=∣x∣2−∣a∣2=12.
Since a is a unit vector, ∣a∣=1, so
∣x∣2−1=12⇒∣x∣2=13⇒∣x∣=13.
✓Final answer∣x∣=13.
- CBSE 2026Set A1 markMCQQ.∣3i+4j+7k∣=(a) 14(b) 74(c) 61(d) 94
›Reveal solutionSolution
Magnitude of ai+bj+ck is a2+b2+c2.
∣3i+4j+7k∣=32+42+72=9+16+49=74.
✓Final answer(b) 74.
- CBSE 2026Set ANNUAL1 markMCQQ.The magnitude of the vector 31i^+31j^+31k^ is(a) 0(b) 3(c) 1(d) -1
›Reveal solutionSolution
Use the magnitude formula ∣v∣=vx2+vy2+vz2 on the given vector.
Given v=31i^+31j^+31k^.
∣v∣=(31)2+(31)2+(31)2
=31+31+31=33=1=1
✓Final answer(c) 1
- CBSE 2025Set ANNUAL1 markMCQQ.Assertion (A): Points A(2i^−j^+k^), B(i^−3j^−5k^) and C(3i^−4j^−4k^) are the vertices of a right angled triangle. Reason (R): In triangle ABC, ∣AB∣2=∣BC∣2+∣AC∣2. Choose the correct option:(a) Both A and R are correct and R is the correct explanation of A.(b) Both A and R are correct but R is not the correct explanation of A.(c) A is correct but R is incorrect.(d) Both A and R are incorrect.
›Reveal solutionSolution
Compute the three squared side-lengths using position vectors and check the Pythagoras relation.
A(2,−1,1), B(1,−3,−5), C(3,−4,−4).
AB=B−A=(−1,−2,−6), so ∣AB∣2=1+4+36=41.
BC=C−B=(2,−1,1), so ∣BC∣2=4+1+1=6.
AC=C−A=(1,−3,−5), so ∣AC∣2=1+9+25=35.
Check: ∣BC∣2+∣AC∣2=6+35=41=∣AB∣2.
So the relation holds — by the converse of Pythagoras' theorem, triangle ABC is right-angled at C. Hence A is true, R is true, and R (the Pythagoras relation) is precisely why A holds.
✓Final answer(i) Both A and R are correct and R is the correct explanation of A.
- CBSE 2025Set E1 markMCQQ.∣i−j−3k∣=(a) 11(b) 11(c) 7(d) 10
›Reveal solutionSolution
The magnitude of i−j−3k is 11.
For a vector ai+bj+ck the magnitude is a2+b2+c2.
Here a=1, b=−1, c=−3, so
∣i−j−3k∣=12+(−1)2+(−3)2=1+1+9=11.
✓Final answer(B) 11.
- CBSE 2025Set E1 markMCQQ.(4i+3j)2=(a) 7(b) 19(c) 25(d) 49
›Reveal solutionSolution
The square of a vector means its dot product with itself, i.e. ∣a∣2, which is 25.
For any vector a, a2=a⋅a=∣a∣2.
Here a=4i+3j, so
a2=42+32=16+9=25.
✓Final answer(C) 25.
- CBSE 2024Set 65/3/11 markMCQQ.If ∣a∣=2 and −3≤k≤2, then ∣ka∣∈: (A) [−6, 4] (B) [0, 4] (C) [4, 6] (D) [0, 6]
›Reveal solutionSolution
The magnitude of a scalar multiple is the absolute value of the scalar times the magnitude of the vector; since ∣k∣ ranges from 0 to 3 when −3≤k≤2, we have ∣ka∣∈[0,6].
The key concept here is how scalar multiplication affects vector magnitude. When you multiply a vector by a scalar, the magnitude scales by the absolute value of that scalar—the direction may flip (if the scalar is negative), but magnitude is always non-negative.
The fundamental property is:
∣ka∣=∣k∣⋅∣a∣
This tells us that to find the range of ∣ka∣, we need to find the range of ∣k∣ and multiply by the fixed magnitude ∣a∣=2.
Now let's trace through the reasoning:
-
Identify the range of the scalar k.
We're given −3≤k≤2.
-
Find the range of ∣k∣.
The absolute value function ∣k∣ measures distance from zero. On the interval [−3,2]:
- At k=0, we have ∣k∣=0 (the minimum).
- At k=−3, we have ∣k∣=3.
- At k=2, we have ∣k∣=2.
The maximum value of ∣k∣ occurs at the endpoint farthest from zero, which is k=−3, giving ∣k∣=3.
Therefore, ∣k∣∈[0,3].
-
Compute the range of ∣ka∣.
Using the scaling property:
∣ka∣=∣k∣⋅∣a∣=∣k∣⋅2=2∣k∣
Since ∣k∣∈[0,3], multiplying through by 2 gives:
2∣k∣∈[0,6]
Watch outA common mistake is to think ∣ka∣ ranges from ∣−3∣⋅2=6 down to ∣2∣⋅2=4, forgetting that k can be zero. The magnitude ∣ka∣ achieves its minimum when k=0, not at the endpoints of the k-interval.
✓Final answerThe correct option is (D) [0,6].
-
- CBSE 2024Set D1 markMCQQ.∣i−j−k∣=(a) 3(b) 3(c) 2(d) 2
›Reveal solutionSolution
Magnitude = square root of sum of squares of components.
∣i−j−k∣=12+(−1)2+(−1)2=3.
✓Final answer(A) 3
- CBSE 2023Set 65/1/11 markMCQQ.If a+b=i^ and a=2i^−2j^+2k^, then ∣b∣ equals : (A) 14 (B) 3 (C) 12 (D) 17
›Reveal solutionSolution
b=i^−a=−i^+2j^−2k^, so ∣b∣=3 — option (B).
We are given a+b=i^ and a=2i^−2j^+2k^.
Isolate b:
b=i^−a=i^−(2i^−2j^+2k^)=−i^+2j^−2k^.
Compute the magnitude:
∣b∣=(−1)2+22+(−2)2=1+4+4=9=3.
✓Final answer∣b∣=3 — option (B).
- CBSE 2023Set E1 markMCQQ.∣i−2j+2k∣=(a) 3(b) 6(c) 7(d) 5
›Reveal solutionSolution
The magnitude is 12+(−2)2+22=3.
The magnitude of a vector ai+bj+ck is a2+b2+c2.
Here a=1, b=−2, c=2, so
∣i−2j+2k∣=12+(−2)2+22=1+4+4=9=3.
✓Final answer(a) 3.
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.