Q.Domain of a2−x2 (a>0) is
(A) (−a, a)
(B) [−a, a]
(C) [0, a]
(D) (−a, 0]
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Rational Function Domain
What is a Rational Function Domain?
Imagine you're baking a cake and the recipe says "add flour until the mixture is smooth." If you add too much flour, the mixture becomes a dry lump — it stops being a proper batter. A rational function is like that mixture: it's a fraction made of two polynomials, and it only "works" when the denominator isn't zero.
A rational function looks like this:
f(x)=Q(x)P(x)
where P(x) and Q(x) are polynomials, and Q(x)=0.
The domain of a rational function is simply the set of all real numbers x for which the function is defined — meaning, all x except those that make the denominator zero.
The Intuition First
Think of division in everyday life. You can divide 10 apples among 5 people — that's fine. You can divide 10 apples among 2 people — also fine. But can you divide 10 apples among 0 people? That doesn't make sense. You can't split something among nobody.
In the same way, a rational function is a division. The denominator tells you "how many groups" you're splitting into. If the denominator is zero, the division is impossible — the function has no value there.
So the domain is: all real numbers, except the ones that make the bottom zero.
The Precise Statement
Domain of f(x)=Q(x)P(x) is {x∈R∣Q(x)=0}
In plain words: find every x that makes Q(x)=0, and remove those from the set of all real numbers.
How to Find the Domain — Step by Step
Step 1: Write down the denominator Q(x).
Step 2: Set Q(x)=0 and solve for x.
Step 3: The domain is all real numbers except those solutions.
You only care about the denominator. The numerator P(x) can be anything — even zero — and the function is still defined (it just equals zero). Only the denominator matters for domain.
Examples
Example 1: f(x)=x−31
Denominator: x−3=0⟹x=3
Domain: all real numbers except 3. In interval notation: (−∞,3)∪(3,∞)
Example 2: f(x)=x2−4x2+1
Denominator: x2−4=0⟹(x−2)(x+2)=0⟹x=2 or x=−2
Domain: all real numbers except 2 and −2. In interval notation: (−∞,−2)∪(−2,2)∪(2,∞)
Example 3: f(x)=x2+12x+5
Denominator: x2+1=0⟹x2=−1 — no real solution.
Domain: all real numbers, i.e., (−∞,∞) …
Concept: Domain of a square-root function
For a2−x2 to be defined in the real number system, the expression under the square root must be non-negative:
a2−x2≥0
Rearranging gives a2≥x2, which means ∣x∣≤a.
This inequality is equivalent to −a≤x≤a. …
For a square root to be defined in the reals, its argument must be non-negative; solving a2−x2≥0 gives −a≤x≤a, so the domain is [−a,a].
Why the square root restricts the domain
When we write a2−x2, we're asking: for which values of x does this expression produce a real number? The square root function in the real number system is only defined when its argument is non-negative. If a2−x2 becomes negative, a2−x2 has no real value.
This is fundamentally different from, say, x1, where we exclude points that make the denominator zero. Here we need the entire expression under the root to be zero or positive.
Finding where a2−x2≥0
The condition for the domain is:
a2−x2≥0
Notice the inequality is non-strict (≥, not >) because 0=0 is perfectly well-defined.
Step-by-step solution:
- Rearrange the inequality:
a2≥x2
-
Interpret what x2≤a2 means geometrically:
The square of x cannot exceed the square of a. Since both a2 and x2 are non-negative, this means ∣x∣≤a (the absolute value of x is at most a).
-
Translate the absolute value inequality:
∣x∣≤a⟺−a≤x≤a
This captures all real numbers whose distance from zero is at most a.
- Check the boundary points:
- At x=a: a2−a2=0=0 ✓
- At x=−a: a2−(−a)2=0=0 ✓ …
- KCET 2026Set UNKNOWN1 markMCQQ.The domain of the function 9−xx−7 is (A) (7,9) (B) [7,9) (C) [7,9] (D) (7,9]
›Reveal solutionSolution
The expression under the square root must be ≥0, and the denominator can never be zero; a sign chart around x=7 and x=9 gives the domain.
Step 1 — Set up the condition
For 9−xx−7 to be real, we need
9−xx−7≥0,9−x=0 (i.e. x=9).
Step 2 — Sign analysis
The critical points are x=7 (numerator zero) and x=9 (denominator zero).
- For x<7: numerator (x−7)<0, denominator (9−x)>0 ⇒ quotient <0. Rejected.
- At x=7: quotient =0≥0. Included. …
- KCET 2025Set A-11 markMCQQ.If f(x)=sin[π2x]x−sin[−π2x]x, where [x]= greatest integer ≤x, then which of the following is not true? (A) f(0)=0 (B) f(2π)=1 (C) f(4π)=1+21 (D) f(π)=−1
›Reveal solutionSolution
Evaluate the greatest-integer constants first ([π2]=9, [−π2]=−10) to reduce f to sin9x+sin10x, then test each option; only f(π)=−1 fails.
Step 1 — Evaluate the greatest-integer constants.
π2=9.8696…⇒[π2]=9
−π2=−9.8696…⇒[−π2]=−10
Why −10 and not −9: [y] is the greatest integer not exceeding y. Since −10≤−9.87<−9, the greatest integer below −9.87 is −10. (Students routinely write −9 here — that is the whole trap of this problem.)
Step 2 — Simplify f.
f(x)=sin([π2]x)−sin([−π2]x)=sin(9x)−sin(−10x)
Since sin is odd, sin(−10x)=−sin(10x):
f(x)=sin9x+sin10x
Step 3 — Test each option.
(A) f(0):
f(0)=sin0+sin0=0⇒f(0)=0TRUE
(B) f(π/2):
f(2π)=sin29π+sin210π=sin(4π+2π)+sin(5π)
=sin2π+0=1+0=1TRUE
(C) f(π/4):
f(4π)=sin49π+sin410π=sin(2π+4π)+sin25π …
- KCET 2024Set A-11 markMCQQ.Let f:R→R be defined by f(x)=x2+1. Then the pre images of 17 and −3 respectively are (A) ϕ,{4,−4} (B) {3,−3},ϕ (C) {4,−4},ϕ (D) {4,−4},{2,−2}
›Reveal solutionSolution
The pre‑image of a value is the set of all x such that f(x) equals that value. For f(x)=x2+1, the pre‑image of 17 is {4,−4} and the pre‑image of −3 is ϕ (the empty set). The correct option is (C).
The core idea here is the meaning of pre‑image (also called inverse image). For a function f:R→R, the pre‑image of a number y is the set of all x in the domain that map to y:
f−1(y)={x∈R∣f(x)=y}.
It is not about finding an inverse function — it is about solving the equation f(x)=y and collecting all solutions.
Now f(x)=x2+1 is a parabola opening upward, with minimum value 1 at x=0. So f(x) can never be less than 1. That immediately tells us something about the pre‑image of −3.
Let’s work through each case.
- Pre‑image of 17 Set f(x)=17:
x2+1=17⇒x2=16⇒x=±4.
Both 4 and −4 are real numbers, so the pre‑image is {4,−4}.
- Pre‑image of −3 Set f(x)=−3: x2+1=−3⇒x2=−4. …
- COMEDK 2024Set 2024-A1 markMCQQ.
[!FORMULA] The number of points of discontinuity of the rational function f(x)=4x−x3x2−3x+2
(A) 3 (B) 2 (C) 5 (D) 1›Reveal solutionSolution
A rational function is discontinuous where its denominator is zero. Factoring the denominator gives 4x−x3=x(2−x)(2+x), so zeros at x=0,2,−2. The numerator x2−3x+2=(x−1)(x−2) cancels the factor (x−2) with the denominator, so x=2 is a removable discontinuity (a hole), not a vertical asymptote. Thus the points of discontinuity are x=0 and x=−2 only — 2 points.
Concept & Intuition
A rational function f(x)=Q(x)P(x) is defined everywhere except where Q(x)=0. At such an x, the function may have a vertical asymptote (non-removable discontinuity) or a hole (removable discontinuity) if the same factor also appears in P(x). The question asks for the number of points of discontinuity — that includes both holes and asymptotes, because at those x-values the function is not defined. So we must find all real zeros of the denominator, then check for cancellation.
Step-by-step solution
- Factor numerator and denominator Numerator: x2−3x+2=(x−1)(x−2). Denominator: 4x−x3=−x(x2−4)=−x(x−2)(x+2). So
f(x)=−x(x−2)(x+2)(x−1)(x−2).
-
Identify all zeros of the denominator
Set denominator = 0: −x(x−2)(x+2)=0 gives x=0,x=2,x=−2.
These are the only candidates for discontinuity.
-
Check for cancellation (removable vs. non-removable)
The factor (x−2) appears in both numerator and denominator. Cancel it:
f(x)=−x(x+2)x−1for x=2.
At x=2, the original function is undefined, but the limit exists (it’s a hole). So x=2 is a discontinuity (removable). …
- COMEDK 2024Set 2024-E1 markMCQQ.The domain of the function y=log10(3−x)1+x+7 is (A) [−7,3]−{1} (B) (−7,3)−{0} (C) [−7,3)−{2} (D) (−7,3)
›Reveal solutionSolution
The domain is all real numbers that make both terms defined: the square root requires x+7≥0, the logarithm requires its argument positive and its base positive and not 1, and the denominator cannot be zero. The result is [−7,3)−{2}, which matches option (C).
Concept & Intuition
A function’s domain is the set of inputs for which every piece of its expression is defined. Here we have two pieces: a square root and a fraction whose denominator contains a logarithm. Each imposes its own restrictions, and the domain is the intersection of all those conditions. The trick is to handle the logarithm carefully: the argument 3−x must be positive, the base 10 is fine (positive and not 1), but the denominator log10(3−x) cannot be zero — that happens when 3−x=1.
Step-by-step reasoning
- Square root condition x+7 requires the radicand to be non‑negative:
x+7≥0⇒x≥−7.
- Logarithm argument condition log10(3−x) is defined only when its argument is positive:
3−x>0⇒x<3.
- Denominator non‑zero condition The denominator is log10(3−x). A fraction is undefined when its denominator is zero, so we need
log10(3−x)=0.
Since log10(u)=0 exactly when u=1, this gives
3−x=1⇒x=2.
- Combine all conditions From steps 1–3 we have:
- KCET 2019Set A-11 markMCQQ.If ∣3x−5∣≤2 then (A) −1≤x≤37 (B) 1≤x≤37 (C) 1≤x≤39 (D) −1≤x≤39
›Reveal solutionSolution
Unfold the modulus into −2≤3x−5≤2 and solve the double inequality for x.
Step 1 — The concept: what a modulus inequality means.
For any real a and any b>0,
∣a∣≤b⟺−b≤a≤b.
The reason: ∣a∣ is the distance of a from 0 on the number line, so ∣a∣≤b says "a lies within b units of the origin", i.e. a lies in the closed interval [−b,b].
(Contrast with ∣a∣≥b, which splits into a≤−b or a≥b — that one gives two separate rays, not a single interval. Here the sign is ≤, so we get one interval.)
Step 2 — Apply it with a=3x−5 and b=2.
∣3x−5∣≤2⟹−2≤3x−5≤2.
Step 3 — Add 5 to all three parts.
Adding the same number to every part of a double inequality preserves it:
−2+5≤3x−5+5≤2+5
3≤3x≤7.
Step 4 — Divide throughout by 3.
Dividing by a positive number preserves the direction of the inequalities:
33≤x≤37
1≤x≤37.
Step 5 — Sanity-check the endpoints and the options. …
- KCET 2018Set A-11 markMCQQ.The value of limx→0x∣x∣ is (A) 1 (B) −1 (C) 0 (D) Does not exist
›Reveal solutionSolution
The limit does not exist because the left-hand limit (−1) and the right-hand limit (+1) are different, so the two-sided limit is undefined.
The core idea here is that the absolute value function ∣x∣ behaves differently depending on whether x is positive or negative. When x is positive, ∣x∣=x; when x is negative, ∣x∣=−x. This means the expression x∣x∣ simplifies to two different constants on either side of zero. For a limit to exist at a point, the function must approach the same value from both sides. Here, it doesn't — so the limit does not exist.
-
Understand the function piecewise.
For x>0, ∣x∣=x, so x∣x∣=xx=1.
For x<0, ∣x∣=−x, so x∣x∣=x−x=−1.
The function is not defined at x=0 itself (division by zero), but that is irrelevant for a limit — we only care about values near zero.
-
Compute the right-hand limit (as x→0+).
When x approaches 0 from the positive side, x is always positive, so x∣x∣=1.
Hence, limx→0+x∣x∣=1.
-
Compute the left-hand limit (as x→0−).
When x approaches 0 from the negative side, x is always negative, so x∣x∣=−1.
Hence, limx→0−x∣x∣=−1.
-
Compare the two one-sided limits. …
-
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.