Q.The points A(−2,1), B(0,5), C(−1,2) are collinear.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Collinearity Slope Condition
Collinearity Slope Condition — From Intuition to Precision
Imagine three points scattered on a sheet of paper. You can always draw a triangle through them. But if those three points happen to lie perfectly on a single straight line — like beads on a thread — they are called collinear (from Latin co- meaning "together" and linearis meaning "belonging to a line").
The question is: how do you check, using only coordinates, whether three given points are collinear?
The Intuition
Think about walking from point A to point B, then from point B to point C. If all three lie on the same line, your direction of travel should not change when you turn at B. In other words, the slope of AB must equal the slope of BC.
Slope measures steepness: runrise=x2−x1y2−y1. If two segments share the same slope and meet at a common point (B), they lie on the same straight line.
This works because a line has a constant slope everywhere. If AB and BC have the same slope, they are parts of the same line — they cannot bend.
The Precise Statement
Let three points be A(x1,y1), B(x2,y2), and C(x3,y3). They are collinear if and only if:
x2−x1y2−y1=x3−x2y3−y2
provided that x1=x2 and x2=x3 (i.e., no vertical segment).
Collinearity Slope Condition
x2−x1y2−y1=x3−x2y3−y2
What About Vertical Lines?
If x1=x2, the slope of AB is undefined (division by zero). But the condition still works: if AB is vertical, then for collinearity, BC must also be vertical — meaning x2=x3. So the condition becomes: either both slopes are equal and defined, or both are undefined (i.e., both segments are vertical).
A Cleaner Algebraic Form
Cross-multiplying the slope equality gives a form that avoids division entirely:
(y2−y1)(x3−x2)=(y3−y2)(x2−x1)
This works for all cases, including vertical lines.
For quick checks, use the cross-multiplied form — no need to worry about zero denominators.
Example
Check if A(1,2), B(3,6), C(5,10) are collinear.
Slope of AB: 3−16−2=24=2
Slope of BC: 5−310−6=24=2
Slopes are equal → points are collinear. Indeed, they all lie on y=2x.
Why This Matters
The slope condition is the simplest test for collinearity in coordinate geometry. It appears in: …
Concept: Three points are collinear if and only if the slope between any two pairs is equal.
For points A(−2,1), B(0,5), and C(−1,2), we check whether slope AB equals slope AC.
Slope AB:
mAB=0−(−2)5−1=24=2
Slope AC:
mAC=−1−(−2)2−1=11=1 …
The slopes differ (mAB=2, mBC=3) and the triangle area is 1=0, so the three points are NOT collinear — the given statement is false.
Solution
Three points are collinear if and only if the area of the triangle they form is zero, equivalently if and only if the slopes of any two of the segments are equal.
Slope test.
mAB=0−(−2)5−1=24=2,mBC=−1−02−5=−1−3=3.
Since mAB=mBC, the points do not lie on a single line.
Area test (confirmation).
Area=21xA(yB−yC)+xB(yC−yA)+xC(yA−yB). …
- KCET 2019Set A-11 markMCQQ.XY-plane divides the line joining the points A(2,3,−5) and B(−1,−2,−3) in the ratio (A) 2:1 internally (B) 3:2 externally (C) 5:3 internally (D) 5:3 externally
›Reveal solutionSolution
The XY-plane is z=0, so we find the ratio in which z=0 divides the segment joining A(2,3,−5) and B(−1,−2,−3) using the section formula for the z-coordinate. The ratio is 5:3 externally, which corresponds to option (D).
The key idea: the XY-plane is simply the set of all points where z=0. When a plane divides a line segment, the point of intersection lies on both the line and the plane. So we need the point on line AB whose z-coordinate is zero, and then find the ratio in which that point divides AB.
The section formula for three dimensions works exactly like the two-dimensional version, applied separately to each coordinate. If a point P divides AB in the ratio k:1 (with sign indicating internal or external), then its coordinates are:
P=(k+1kx2+x1,k+1ky2+y1,k+1kz2+z1)
for internal division. For external division, the formula uses k:1 with k negative, or equivalently we can use k:−1.
- Set up the condition. Let the point where the line meets the XY-plane be P. Since P lies on AB, we can say P divides AB in some ratio λ:1 (where λ can be positive for internal, negative for external). Then the z-coordinate of P is:
zP=λ+1λzB+zA=λ+1λ(−3)+(−5)=λ+1−3λ−5
- Apply the plane condition. On the XY-plane, z=0. So:
λ+1−3λ−5=0
This gives −3λ−5=0, so λ=−35.
- Interpret the ratio. The ratio is λ:1=−35:1. Multiply through by 3 to get −5:3. A negative sign in the ratio means the division is external — the point lies outside the segment AB, closer to B. The magnitude 5:3 tells us the distances: AP : PB = 5 : 3 externally. …
- KCET 2018Set A-11 markMCQQ.The image of the point (1,6,3) in the line 1x=2y−1=3z−2 is (A) (1,0,7) (B) (7,0,1) (C) (2,7,0) (D) (−1,−6,−3)
›Reveal solutionSolution
The image of a point in a line is found by first locating the foot of the perpendicular from the point to the line, then using the midpoint formula. The image of (1,6,3) in the given line is (1,0,7), which corresponds to option (A).
The key idea: the image of a point in a line is the point such that the line is the perpendicular bisector of the segment joining the point and its image. So the foot of the perpendicular from the point to the line is the midpoint of the point and its image. Find that foot, then double it.
- Write the line in parametric form. The line is 1x=2y−1=3z−2=λ (say). So any point on the line is:
P(λ)=(λ,2λ+1,3λ+2)
-
Let the foot of the perpendicular from A(1,6,3) to the line be F.
F lies on the line, so F=(λ,2λ+1,3λ+2) for some λ.
-
The vector AF must be perpendicular to the direction vector of the line.
Direction vector of the line: d=(1,2,3).
Vector AF=(λ−1,(2λ+1)−6,(3λ+2)−3)=(λ−1,2λ−5,3λ−1)
Perpendicular condition: AF⋅d=0
(λ−1)(1)+(2λ−5)(2)+(3λ−1)(3)=0
λ−1+4λ−10+9λ−3=0
14λ−14=0⇒λ=1
- So the foot F is at λ=1:
F=(1,2(1)+1,3(1)+2)=(1,3,5)
- Now use the midpoint property. If A′(x,y,z) is the image of A in the line, then F is the midpoint of AA′:
F=(21+x,26+y,23+z)=(1,3,5)
Equating coordinates:
- 21+x=1⇒1+x=2⇒x=1 …
- KCET 2018Set A-11 markMCQQ.The value of k such that the line 1x−4=1y−2=2z−k lies on the plane 2x−4y+z=7 is (A) −7 (B) 4 (C) −4 (D) 7
›Reveal solutionSolution
A line lies in a plane iff (i) its direction vector is perpendicular to the plane's normal and (ii) one point of the line satisfies the plane's equation. Condition (ii) fixes k.
Step 1 — Read off the line and the plane.
The line 1x−4=1y−2=2z−k passes through the point A(4,2,k) with direction b=(1,1,2).
The plane 2x−4y+z=7 has normal n=(2,−4,1).
Step 2 — Condition (i): the line must be parallel to the plane.
If the line lies in the plane, it certainly cannot pierce it, so its direction must be perpendicular to the normal:
b⋅n=(1)(2)+(1)(−4)+(2)(1)=2−4+2=0 ✓
This is satisfied for every k (the direction ratios do not involve k), so it only tells us the line is parallel to the plane. It is not yet in it — a parallel line could sit above it.
Step 3 — Condition (ii): a point of the line must lie in the plane. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.