Q.The hexaquo manganese(II) ion contains five unpaired electrons, while the hexacyanoion contains only one unpaired electron. Explain using Crystal Field Theory.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Stability of Oxidation States
Stability of Oxidation States – From Intuition to Precision
Imagine you're holding a ball on a hill. If you place it exactly at the top, it's balanced — but the slightest push sends it rolling down. That's an unstable position. If you place it in a small dip on the hillside, it stays put even if nudged — that's stable. Oxidation states work the same way: some are like the hilltop (easily changed), others like the dip (hard to change).
The Core Intuition
An oxidation state is just a number we assign to an atom to track how many electrons it has gained or lost compared to its neutral state. But atoms don't "want" to stay in arbitrary oxidation states — they want to reach a configuration that minimises their energy.
Stability here means: how reluctant is that oxidation state to change under normal conditions? A stable oxidation state resists being oxidised further or reduced further. An unstable one readily changes into something else.
The Precise Statement
Stability of an oxidation state refers to the tendency of an element to maintain that particular oxidation state under given conditions (temperature, pH, presence of other reagents). A stable oxidation state is one that does not easily undergo redox reactions — it is neither easily oxidised nor easily reduced.
This depends on three key factors:
- Electronic configuration – Half-filled and fully-filled d or f subshells confer extra stability (e.g., Fe3+ with d5 is more stable than Fe2+ with d6 in some contexts).
- Inert pair effect – Heavier p-block elements (like Tl, Pb, Bi) show lower oxidation states (e.g., +1 for Tl) as more stable than higher ones (+3 for Tl), because the s-electrons become reluctant to participate.
- Disproportionation tendency – Some oxidation states are unstable because they spontaneously convert into two other states (e.g., Cu+ in aqueous solution gives Cu2+ and Cu).
Stability is relative — it depends on the environment. Mn2+ is stable in acidic solution but easily oxidised in alkaline medium. Always specify conditions when discussing stability.
Examples That Make It Concrete
Transition metals – Cr3+ (d3) and Mn2+ (d5) are exceptionally stable because half-filled/half-filled-like configurations have low energy. Cr2+ (d4) is easily oxidised to Cr3+ — it's unstable.
p-block elements – Pb2+ is stable, Pb4+ is a strong oxidising agent (unstable). Sn2+ is a reducing agent (easily oxidised to Sn4+), so Sn4+ is more stable for tin.
Common pattern – For most elements, the most common oxidation state is the most stable one under standard conditions. But "most common" isn't always "most stable" — e.g., Fe3+ is common but Fe2+ is more stable in acidic solution.
Do not confuse "stability" with "occurrence". Mn7+ (as MnO4−) is common in the lab but is a powerful oxidising agent — it is not stable in the sense of resisting change. It readily accepts electrons.
How to Think About It in Exams …
Why this formula?
Stability of Oxidation States: Why It Works
This concept explains why certain oxidation states of an element are more stable than others — and why some states are never observed at all.
The Core Idea: Energy Minimisation
An oxidation state is stable when the total energy of the system is at a minimum. This depends on three competing factors:
- Ionisation energy (energy needed to remove electrons)
- Lattice energy (for ionic compounds) or bond energy (for covalent compounds)
- Electronic configuration (half-filled / fully-filled subshells)
There is no single formula for stability — instead, we use trends and principles that act as "formulae" for prediction.
Key Principle 1: Inert Pair Effect (for p-block elements)
Why it holds:
For heavier elements (e.g., Tl, Pb, Bi), the 6s² electrons are held very tightly due to poor shielding and relativistic effects. They resist removal.
- Result: Lower oxidation state (e.g., +1 for Tl, +2 for Pb) becomes more stable than the higher state (+3, +4).
- Example: TlX3+ is a strong oxidising agent — it readily gains two electrons to become TlX+.
Derivation logic:
The energy cost to remove the 6s² electrons is greater than the energy gained by forming additional bonds or lattice. So the system stays in the lower state.
Key Principle 2: Half-Filled / Fully-Filled Subshell Stability
Why it holds:
A half-filled (d5, f7) or fully-filled (d10, f14) subshell has extra exchange energy and symmetry — making it unusually stable.
- Example: MnX2+ (d5) is more stable than MnX3+ (d4). FeX3+ (d5) is more stable than FeX2+ (d6).
Derivation logic:
The exchange energy (Hund's rule) is maximum for half-filled configurations. Removing an electron from a half-filled shell costs extra energy — so the half-filled state is favoured.
Key Principle 3: Lattice Energy / Hydration Energy Compensation
For transition metals, stability of a particular oxidation state in aqueous solution depends on:
ΔG∘=ΔHhydration∘−ΔHionisation∘
Why it holds:
- Higher oxidation states have higher ionisation energy (harder to remove electrons).
- But they also have higher hydration energy (smaller, more charged ions attract water more strongly).
- The balance determines which state is stable.
Example:
- CuX+ is unstable in water because its hydration energy is too low to compensate for the loss of the second electron.
- CuX2+ is stable in water.
Key Principle 4: Disproportionation
Some oxidation states are unstable and spontaneously convert to two other states:
2CuX+Cu+CuX2+
Why it holds: …
The key idea is that the crystal field splitting caused by different ligands determines whether the d5 configuration of Mn(II) is high-spin or low-spin.
-
Identify the metal ion and its d-electron count. Mn(II) has the electronic configuration [Ar]3d5. In an octahedral field, the five d-electrons must be placed in the t2g and eg orbitals.
-
Consider the ligand field strength. HX2O is a weak-field ligand, causing a small crystal field splitting (Δo). CNX− is a strong-field ligand, causing a large Δo. …
The difference in unpaired electrons arises because HX2O is a weak field ligand (high-spin d5, 5 unpaired) while CNX− is a strong field ligand (low-spin d5, 1 unpaired) in an octahedral crystal field.
The Core Idea: Crystal Field Splitting and Electron Pairing
In an octahedral complex, the five d orbitals split into two sets: the lower-energy t2g set (dxy,dxz,dyz) and the higher-energy eg set (dz2,dx2−y2). The energy gap between them is called Δo (or 10Dq).
The key question for a d5 ion like MnX2+ is: when you place the fifth electron, does it:
- Pair up in the t2g set (overcoming the pairing energy P), or
- Go singly into the higher eg orbital?
The answer depends on whether Δo>P (strong field → low-spin) or Δo<P (weak field → high-spin).
If Δo>P (strong field): low-spin configuration
If Δo<P (weak field): high-spin configuration
Step-by-Step Reasoning
-
Identify the metal ion and its d count.
MnX2+ has the electronic configuration [Ar]3d5. In both complexes, the metal is in the +2 oxidation state, so we are dealing with a d5 system.
-
Recognize the ligand field strength.
- HX2O is a weak field ligand — it lies low in the spectrochemical series. It produces a small Δo.
- CNX− is a strong field ligand — it lies very high in the spectrochemical series. It produces a large Δo.
-
Apply Hund's rule vs. the pairing energy.
For a d5 ion in a weak field (Δo small):
- The first three electrons go into the three t2g orbitals, all unpaired (Hund's rule).
- The fourth and fifth electrons go into the two eg orbitals, also unpaired, because it costs less energy to place them in higher orbitals than to pair them up in the t2g set.
- Result: 5 unpaired electrons — the high-spin configuration (t2g)3(eg)2.
For a d5 ion in a strong field (Δo large):
- The first three electrons go into the t2g orbitals, unpaired.
- The fourth and fifth electrons now find it energetically cheaper to pair up in the t2g orbitals (since Δo>P) than to jump to the eg level.
- Result: 1 unpaired electron — the low-spin configuration (t2g)5(eg)0. …
Method: Crystal Field Theory (CFT) Analysis of d-orbital Splitting
Why this method works
Crystal Field Theory explains how the arrangement of ligands around a central metal ion affects the energies of its d-orbitals. The number of unpaired electrons depends on whether the ligand field is weak (high-spin) or strong (low-spin).
Step 1: Identify the metal ion and its d-electron count
- Manganese (Mn) atomic number = 25
- Mn²⁺: remove 2 electrons → electron configuration: [Ar]3d5
- Number of d-electrons = 5
Step 2: Determine the geometry and splitting pattern
Both complexes are octahedral (6 ligands).
In an octahedral field, the five d-orbitals split into:
- Lower energy: t2g (three orbitals: dxy,dxz,dyz)
- Higher energy: eg (two orbitals: dx2−y2,dz2)
The energy gap between them is called Δoct (or 10Dq).
Step 3: Apply the ligand strength to decide pairing
| Ligand | Field strength | Effect on Δoct |
|---|---|---|
| H2O | Weak field | Small Δoct |
| CN− | Strong field | Large Δoct |
Step 4: Fill the d-orbitals using Hund’s rule
For [Mn(H2O)6]2+ (weak field, small Δ)
- Electrons fill all five orbitals singly before pairing (Hund’s rule)
- Configuration: t2g3eg2
- All 5 electrons are unpaired → high-spin
For [Mn(CN)6]4− (strong field, large Δ)
- Large Δ makes pairing energetically favourable
- Electrons pair up in the lower t2g orbitals first …
Here are the common mistakes students make when explaining the difference in unpaired electrons (high-spin vs low-spin d5) using Crystal Field Theory (CFT) for this specific question, along with how to avoid each.
Mistake 1: Confusing High-Spin and Low-Spin Configurations
The Mistake:
Students often incorrectly assign the electron configuration. They might say the hexacyanoion ([Mn(CN)6]4−) has five unpaired electrons because they forget that CN− is a strong field ligand, or they incorrectly apply Hund's rule to the low-spin case.
Why it happens:
Students memorize "H2O is weak field, CN− is strong field" but fail to apply the consequence: strong field ligands cause a large crystal field splitting (Δ), forcing electrons to pair up in the lower t2g orbitals before occupying the higher eg orbitals.
How to Avoid:
- Always draw the d-orbital splitting diagram. For an octahedral complex, draw the t2g (lower energy) and eg (higher energy) sets.
- Apply the pairing rule: For Mn2+ (d5):
- Weak field (H2O): Small Δ. Electrons fill all five orbitals singly first (Hund's rule). Result: 5 unpaired electrons (high-spin).
- Strong field (CN−): Large Δ. Electrons pair up in the t2g set first. Result: 1 unpaired electron (low-spin).
- Memorize the ligand strength series but always verify by drawing the diagram.
Mistake 2: Forgetting the Oxidation State of Manganese
The Mistake:
Students calculate the d-electron count incorrectly. They might treat the metal as Mn0 or Mn3+ instead of Mn2+.
Why it happens:
The question mentions "hexaquo manganese(II) ion" ([Mn(H2O)6]2+) and "hexacyanoion" ([Mn(CN)6]4−). Students forget to determine the oxidation state of Mn in the cyano complex.
How to Avoid:
- Always find the oxidation state first.
- For [Mn(CN)6]4−: CN− has a charge of −1. Total ligand charge = 6×(−1)=−6. Complex charge = −4. So, Mn+(−6)=−4⟹Mn=+2.
- Confirm the dn configuration: Mn2+ is d5 (Mn atomic number = 25; Mn2+ loses 2 electrons from 4s, leaving 5 in 3d).
Mistake 3: Stating the Configurations Without the Energy Argument
The Mistake:
Students write "high-spin" and "low-spin" as memorised labels but cannot say why the strong-field ligand makes pairing worthwhile — the answer earns little credit without the energy reasoning.
Why it happens:
The link between the splitting diagram and the Crystal Field Stabilisation Energy (CFSE) is skipped.
How to Avoid:
- Explain using CFSE:
- For d5 in a weak field (high-spin t2g3eg2): CFSE =3×(−0.4Δo)+2×(+0.6Δo)=0 — no net stabilization relative to the spherical field.
- For d5 in a strong field (low-spin t2g5eg0): CFSE =5×(−0.4Δo)=−2Δo.
- When Δo is large (as with CN−), this 2Δo stabilization outweighs the extra pairing energy, so the electrons pair up — the low-spin arrangement is the lower-energy one. For H2O, Δo is too small to pay for pairing, so the high-spin arrangement wins.
Mistake 4: Ignoring the Role of Ligand Field Strength
The Mistake: …
- KCET 2025Set D-41 markMCQQ.Which of the following statements are true about [NiCl4]2−?(a) The complex has tetrahedral geometry(b) Co-ordination number of Ni is 2 and oxidation state is +4(c) The complex is sp3 hybridised(d) It is a high spin complex(e) The complex is paramagnetic (A) a, c, d and e (B) a, b, d and e (C) b, c, d and e (D) a, b, c and d
›Reveal solutionSolution
Find the oxidation state (+2, so d8), note Cl⁻ is a weak-field ligand so no pairing occurs, giving a high-spin sp3 tetrahedral paramagnetic complex — every statement is true except (b), whose CN and oxidation state are both wrong.
Step 1 — Oxidation state and d-configuration of nickel
Let the oxidation state of Ni be x. Chloride carries −1 each, and the overall charge is −2:
x+4(−1)=−2⟹x=−2+4=+2
So the metal is NiX2+.
Nickel is Z=28: Ni=[Ar]3d84s2. Removing the two 4s electrons:
NiX2+=[Ar]3d8(a d8 ion)
Step 2 — Coordination number
Chloride is a unidentate ligand (one donor atom, Cl). With four of them:
Coordination number=4
Step 3 — This already settles statement (b)
(b) "Co-ordination number of Ni is 2 and oxidation state is +4"
Both halves are wrong — the CN is 4 (Step 2) and the oxidation state is +2 (Step 1). (b) is FALSE.
This is decisive: every option containing (b) — namely (B), (C) and (D) — is eliminated at once. Only (A) a, c, d and e remains. Let us verify that all four of those statements are indeed true.
Step 4 — Ligand field strength decides everything else
In the spectrochemical series, chloride sits near the weak-field end:
IX−<BrX−<Cl−<FX−<HX2O<NHX3<en<CNX−≈CO
ClX− is a weak-field ligand, so the splitting energy Δ it produces is small — smaller than the electron pairing energy P:
Δ<P
When Δ<P, it costs less energy for an electron to occupy a higher orbital than to pair up in a lower one. Therefore no pairing occurs — the 3d8 configuration is left untouched, with its two unpaired electrons intact.
Since the 3d orbitals are not vacated, no inner 3d orbital is available for hybridisation.
Step 5 — Hybridisation and geometry ⇒ statements (a) and (c)
With the 3d set unavailable, Ni²⁺ must use its outer orbitals: one 4s and three 4p.
4s+4px+4py+4pz⟶four sp3 hybrid orbitals
Four sp3 orbitals point to the corners of a tetrahedron (109.5∘).
- (a) "The complex has tetrahedral geometry" — TRUE ✓
- (c) "The complex is sp3 hybridised" — TRUE ✓ …
- COMEDK 2025Set 2025-A1 markMCQQ.Larger number of oxidation states are exhibited by the actinoids than those of lanthanoids. The reason is: (A) Lesser energy difference between 5 f and 6 d than between 4 f and 5 d orbitals (B) More energy difference between 5 f and 6 d than between 4 f and 5 d orbitals (C) 4 f orbitals are more diffused than 5 f orbitals (D) Highly reactive nature of the actinoids
›Reveal solutionSolution
The key idea is that actinoids show more oxidation states because their 5f and 6d orbitals are closer in energy than the 4f and 5d orbitals of lanthanoids, making it easier to involve f-electrons in bonding. The correct option is (A).
The question asks why actinoids exhibit a larger number of oxidation states than lanthanoids. This is a classic comparison in f-block chemistry, rooted in the electronic structure of the two series.
Concept and Intuition
Oxidation states arise when an atom loses electrons. For f-block elements, the electrons lost can come from both the f and d orbitals. The ease of removing f-electrons depends on how tightly they are held, which is related to the energy gap between the f and d orbitals. A smaller gap means f-electrons can be promoted to d orbitals more readily, allowing a wider range of oxidation states. Actinoids (5f series) have a smaller 5f–6d energy difference than lanthanoids (4f–5d), so they can access more oxidation states.
Let’s break it down step by step.
-
Understand the orbital energy trends
In lanthanoids, the 4f orbitals are deeply buried inside the atom, shielded by outer electrons. The 5d orbitals are at a significantly higher energy. This large 4f–5d energy gap makes it difficult to remove or promote 4f electrons, so lanthanoids typically show only +3 (and occasionally +2 or +4) oxidation states.
In actinoids, the 5f orbitals are less shielded and more extended (diffuse). The 5f and 6d orbitals are much closer in energy. This small energy difference allows 5f electrons to be easily promoted to 6d orbitals or directly lost, enabling a variety of oxidation states (e.g., +3, +4, +5, +6, and even +7 in some cases like neptunium and plutonium).
-
Evaluate the options
- (A) Lesser energy difference between 5f and 6d than between 4f and 5d orbitals — This matches the explanation above.
- (B) More energy difference — This would make it harder to involve f-electrons, reducing oxidation states, so incorrect.
- (C) 4f orbitals are more diffused than 5f orbitals — Actually, 5f orbitals are more diffused (less tightly held) due to poorer shielding, so this is false. …
-
- COMEDK 2024Set 2024-E1 markMCQQ.Identify the correct statement from the following. (A) The green manganate ion shows diamagnetic nature but the permanganate ion exhibits paramagnetic nature (B) Interstitial compounds of transition metals have lower melting points than that of pure transition metals and their compounds are chemically reactive (C) Cerium is a lanthanoid metal which exists in a stable oxidation state of +4 , besides exhibiting an oxidation state of +3 (D) Cr(VI) is more stable than W(VI) and hence acts as a good oxidising agent
›Reveal solutionSolution
The question tests knowledge of transition metal chemistry: magnetic properties of manganate vs. permanganate, properties of interstitial compounds, oxidation states of cerium, and stability of Cr(VI) vs. W(VI). Only statement (C) is correct.
Let’s examine each statement carefully, using chemical principles to decide which one is accurate.
-
Statement (A): “The green manganate ion shows diamagnetic nature but the permanganate ion exhibits paramagnetic nature.”
- The manganate ion is MnO42−, where manganese is in the +6 oxidation state. Electronic configuration of Mn in +6: [Ar]3d1. That’s one unpaired electron → paramagnetic, not diamagnetic.
- The permanganate ion is MnO4−, with Mn in +7: [Ar]3d0. No unpaired electrons → diamagnetic.
- So the statement gets both magnetic natures backwards. False.
-
Statement (B): “Interstitial compounds of transition metals have lower melting points than that of pure transition metals and their compounds are chemically reactive.”
- Interstitial compounds (e.g., carbides, nitrides, hydrides) form when small atoms like C, N, or H occupy holes in the metal lattice. This usually increases hardness and melting point (often very high), and they are chemically inert (not reactive).
- Both claims here are opposite to reality. False.
-
Statement (C): “Cerium is a lanthanoid metal which exists in a stable oxidation state of +4, besides exhibiting an oxidation state of +3.”
- Cerium (Ce, atomic number 58) has the electron configuration [Xe]4f15d16s2. The common +3 state arises from losing the 5d and 6s electrons.
- The +4 state is also stable because losing one more electron gives a 4f0 configuration (empty f-subshell), which is especially stable. Ce(IV) is well-known in compounds like CeO2 and ceric ammonium nitrate.
- This is a textbook fact. True. …
-
- COMEDK 2024Set 2024-M1 markMCQQ.Choose the incorrect statement from the following (A) The ability of Fluorine to stabilise the higher oxidation states of transition metals exceeds that of Oxygen (B) Cu (I) compounds in aqueous medium undergo disproportionation reaction (C) Cr2+ is a stronger reducing agent than Fe2+ (D) MoO3 and WO3 are not as strong oxidants as CrO3
›Reveal solutionSolution
The key idea is to evaluate each statement about transition-metal chemistry using periodic trends and redox stability; the incorrect statement is (A) because fluorine cannot exceed oxygen in stabilising high oxidation states.
Let’s go through each option carefully, building the reasoning step by step.
-
Option (A): “The ability of Fluorine to stabilise the higher oxidation states of transition metals exceeds that of Oxygen”
- In transition-metal oxyanions (like CrO42−, MnO4−), oxygen stabilises high oxidation states via strong π-bonding (O donates electron density to the metal, reducing its effective charge).
- Fluorine is more electronegative than oxygen, but it is a poor π-donor (it has no available d-orbitals for back-bonding) and forms weaker multiple bonds.
- For example, Mn2O7 (Mn in +7) is stable, but MnF7 does not exist; the highest fluoride of Mn is MnF4 (+4).
- Conclusion: Oxygen stabilises high oxidation states better than fluorine. So statement (A) is false.
-
Option (B): “Cu(I) compounds in aqueous medium undergo disproportionation reaction”
- Disproportionation: 2Cu+→Cu+Cu2+.
- In water, the standard reduction potentials: Cu++e−→Cu (E∘=+0.52V) and Cu2++e−→Cu+ (E∘=+0.16V).
- The net cell potential for disproportionation is Ecell∘=0.52−0.16=+0.36V>0, so it is spontaneous.
- Conclusion: Statement (B) is true.
-
Option (C): “Cr2+ is a stronger reducing agent than Fe2+”
- Standard reduction potentials: Cr3++e−→Cr2+ (E∘=−0.41V) Fe3++e−→Fe2+ (E∘=+0.77V)
- A more negative reduction potential means the reduced form (here Cr2+) is more easily oxidised — i.e., a stronger reducing agent. …
-
- KCET 2023Set D-21 markMCQQ.In which one of the following pairs, both the elements does not have (n−1)d10ns2 configuration in its elementary state? (A) Zn, Cd (B) Cd, Hg (C) Hg, Cn (D) Cu, Zn
›Reveal solutionSolution
The configuration (n−1)d10ns2 is the ground-state pattern of group-12 elements. Copper is the exception — it is (n−1)d10ns1, not ns2 — so the pair in which the configuration fails is (D) Cu, Zn.
The pattern (n−1)d10ns2 means a filled (n−1)d subshell together with a filled ns subshell. This is the hallmark of the group-12 elements — Zn, Cd, Hg and Cn — in their ground state. To find the pair that breaks the pattern, we check each element's configuration.
-
Option (A): Zn, Cd.
Zn (Z=30) is [Ar]3d104s2; Cd (Z=48) is [Kr]4d105s2. Both group 12 — both fit the pattern.
-
Option (B): Cd, Hg.
Cd fits; Hg (Z=80) is [Xe]4f145d106s2. Both group 12 — both fit.
-
Option (C): Hg, Cn.
Hg fits; Cn (Z=112) is the group-12 element [Rn]5f146d107s2. Both fit.
-
Option (D): Cu, Zn.
Zn is 3d104s2 (fits), but Cu (Z=29) is the classic exception: its ground state is [Ar]3d104s1, not 3d94s2, because a completely filled d10 subshell is especially stable and pulls one electron out of 4s. So Cu is (n−1)d10ns1 and does not show the ns2 configuration. …
-
- COMEDK 2023Set 2023-E1 markMCQQ.Identify the incorrect statement. (A) Ability of Fluorine to stabilise higher oxidation states in transition metals is due to the low lattice enthalpy of the fluorides. (B) The second and third Ionisation enthalpies of Mn2+ and Fe3+ respectively have lower values than expected. (C) Transition metals readily form alloys because their metallic radii are within about 15% of each other. (D) Cr2+ acts as reducing agent while Mn3+ acts as an oxidising agent though both the ions have d4 configuration.
›Reveal solutionSolution
The incorrect statement is (A): fluorine stabilises higher oxidation states because of the high lattice (and bond) enthalpy of its compounds, not the low lattice enthalpy. B, C and D are correct NCERT statements.
Option (A) — incorrect. Fluorine, being small and highly electronegative, forms fluorides with high lattice enthalpy (and high M–F bond enthalpy). It is this high lattice/bond enthalpy that lets fluorine stabilise the highest oxidation states of transition metals. The statement wrongly attributes it to "low lattice enthalpy."
Option (B) — correct. The irregular ionisation enthalpies in this series arise from the stability of the half-filled d5 configurations produced (Mn2+, Fe3+), as noted in NCERT.
Option (C) — correct. Transition metals form alloys readily because their metallic radii are similar (within ~15%). …
- KCET 2019Set A-11 markMCQQ.Incorrect statement with reference to Ce(Z=58) (A) Ce4+ is a reducing agent. (B) Atomic size of Ce is more than that of Lu. (C) Ce in +3 oxidation state is more stable than in +4. (D) Ce shows common oxidation states of +3 and +4.
›Reveal solutionSolution
The question tests your understanding of lanthanide chemistry, specifically the stability and redox behaviour of cerium. The incorrect statement is (A): Ce4+ is an oxidising agent, not a reducing agent.
Concept & Intuition
Cerium is the first element in the lanthanide series (Z=58). Its ground-state electronic configuration is [Xe]4f15d16s2. The key to its chemistry lies in the stability of the empty 4f subshell (4f0) and the half-filled 4f subshell (4f7). For cerium, losing four electrons gives the Ce4+ ion with a [Xe] configuration — a noble gas core, which is exceptionally stable. This stability makes Ce4+ a strong oxidising agent (it readily accepts electrons to go back to the more common Ce3+ state). In contrast, Ce3+ has a [Xe]4f1 configuration and is the most stable oxidation state for cerium in aqueous solution.
Now let’s examine each statement.
-
Statement (A): Ce4+ is a reducing agent.
A reducing agent is a substance that donates electrons (gets oxidised itself). Ce4+ has a strong tendency to gain one electron and become Ce3+ (the 4f1 configuration is more stable than 4f0 in most chemical environments). This means Ce4+ is an oxidising agent, not a reducing agent. In fact, Ce4+ is a well-known oxidising agent in analytical chemistry (e.g., in cerimetric titrations). So this statement is false.
-
Statement (B): Atomic size of Ce is more than that of Lu.
This is true. Across the lanthanide series (from Ce, Z=58, to Lu, Z=71), there is a steady decrease in atomic and ionic radii — the lanthanide contraction. The 4f electrons are poorly shielding, so as nuclear charge increases, the electron cloud is pulled inward. Ce is near the beginning of the series, Lu at the end, so Ce has a larger atomic radius than Lu.
-
Statement (C): Ce in +3 oxidation state is more stable than in +4. …
-
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.