Skip to content
NCERT Exemplar · Q19

Q.Explain why the reactance provided by a capacitor to an alternating current decreases with increasing frequency.

Odisha ChseSubjective· 2mImportance★★★★★
74% · 37/50 Questions
🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Capacitive reactance XC=1ωCX_C = \frac{1}{\omega C} falls as frequency rises because a higher frequency means the capacitor has less time to charge fully between voltage reversals, so it offers less opposition to current flow.

The Core Idea: Why Capacitors Oppose AC

A capacitor doesn't "resist" current the way a resistor does. Instead, it opposes changes in voltage. When you apply an AC voltage, the capacitor charges and discharges continuously. The key is time: at low frequencies, the voltage changes slowly, so the capacitor has plenty of time to charge up fully, building a large opposing voltage that limits current. At high frequencies, the voltage reverses so quickly that the capacitor barely charges at all — it never builds up much opposing voltage, so current flows almost freely.

This opposition is called capacitive reactance (XCX_C), and it's not a constant — it depends on frequency.

XC=1ωC=12πfCX_C = \frac{1}{\omega C} = \frac{1}{2\pi f C}

where ω=2πf\omega = 2\pi f is the angular frequency, ff is the frequency in hertz, and CC is the capacitance in farads.


Step-by-Step Explanation

1. Start with the fundamental relationship for a capacitor

The current through a capacitor is proportional to the rate of change of voltage across it:

i(t)=Cdv(t)dti(t) = C \frac{dv(t)}{dt}

This is the physical law. It tells us: the faster the voltage changes, the larger the current. For an AC voltage v(t)=V0sin⁡(ωt)v(t) = V_0 \sin(\omega t), we get:

i(t)=Cddt[V0sin⁡(ωt)]=ωCV0cos⁡(ωt)i(t) = C \frac{d}{dt}[V_0 \sin(\omega t)] = \omega C V_0 \cos(\omega t)

Notice the current amplitude is I0=ωCV0I_0 = \omega C V_0.

2. Define reactance as the ratio of voltage amplitude to current amplitude

Just as resistance is R=V/IR = V/I for DC, reactance is defined as:

XC=V0I0=V0ωCV0=1ωCX_C = \frac{V_0}{I_0} = \frac{V_0}{\omega C V_0} = \frac{1}{\omega C}

This is the mathematical origin of the formula. The ω\omega in the denominator comes directly from the derivative — the rate of change of voltage.

3. Interpret what happens as frequency increases

When ff increases, ω=2πf\omega = 2\pi f increases. Since XC=1/(ωC)X_C = 1/(\omega C), the reactance decreases. Let's see why physically:

  • At low ff (say 50 Hz): The voltage changes slowly. The capacitor charges nearly to the peak voltage before the polarity reverses. A large opposing voltage builds up, so little current flows — high reactance.
  • At high ff (say 10 kHz): The voltage reverses so fast that the capacitor only charges a tiny amount before being forced to discharge. The opposing voltage never gets large, so current flows easily — low reactance.
Tip

Think of a capacitor as a "bucket" being filled and emptied. At low frequency, you fill it nearly full each time — hard to pour more water in. At high frequency, you barely wet the bottom — water flows in and out almost freely.

4. The limiting cases confirm the trend

  • DC (f=0f = 0): XC→∞X_C \to \infty. A capacitor blocks DC completely — it charges up and then no current flows. …

Unlock everything free for 14 days

  • Full step-by-step solutions
  • Concept-first explanations
  • Methods, shortcuts & mistakes
  • PYQ mapping + timed mock tests

Full access for 14 days. No credit card required.