Q.If y=Asinx+Bcosx, then prove that dx2d2y+y=0.
Concept understanding — Successive Differentiation
Successive Differentiation — Repeated Slopes
Differentiate a function, then differentiate the result, then differentiate that, and so on. Each pass produces a new function describing a deeper layer of change. The physics picture makes it concrete: position → velocity (1st derivative) → acceleration (2nd) → jerk (3rd). Every step asks the same question: "how does the previous rate of change itself change?"
The definition and notation
If y=f(x), its successive derivatives are written y1,y2,…,yn, equivalently f′(x),f′′(x),…,f(n)(x) or dxdy,dx2d2y,…,dxndny. Each one is the derivative of the previous:
dxndny=dxd(dxn−1dn−1y).
| Order | Leibniz | Lagrange | Newton |
|---|---|---|---|
| 1st | dxdy | f′(x) | y˙ |
| 2nd | dx2d2y | f′′(x) | y¨ |
| nth | dxndny | f(n)(x) | — |
Seeing the pattern
Take y=x4: y1=4x3,y2=12x2,y3=24x,y4=24,y5=0. Each differentiation drops the degree by one, so a degree-n polynomial has a constant nth derivative and vanishing higher ones. Other families behave differently: eax never dies out (dxndneax=aneax), and sinx cycles every four steps (sin→cos→−sin→−cos).
Power rule applied n times: dxndn(xm)=m(m−1)⋯(m−n+1)xm−n for n≤m.
dx2d2y is not (dxdy)2 — a second derivative is not the square of the first derivative.
Why it matters
Higher derivatives power the second-derivative test for maxima and minima, Taylor and Maclaurin expansions, Leibniz's theorem for the nth derivative of a product, and differential equations such as F=ma (a second derivative of position).
Successive (higher-order) differentiation is its own named section in the NCERT Class 12 Continuity and Differentiability chapter, and finding a general nth-derivative pattern for polynomials, exponentials or sine is a recurring CBSE board and JEE Main question type. Students searching 'successive differentiation class 12 examples' or 'nth derivative formula' will recognize this repeated-differentiation notation (y₁, y₂, ..., yₙ) as the standard exam convention.
Concept: Second-order linear differential equation with constant coefficients — verifying a given solution.
We are given y=Asinx+Bcosx, where A and B are constants.
Step 1: Differentiate once with respect to x:
dxdy=Acosx−Bsinx
Step 2: Differentiate again:
dx2d2y=−Asinx−Bcosx
Step 3: Notice that the right-hand side is exactly −(Asinx+Bcosx)=−y.
Therefore:
dx2d2y+y=0
The given function satisfies dx2d2y+y=0.
For a function of the form y=Asinx+Bcosx, its second derivative is −y, so dx2d2y+y=0 holds identically — this is a direct consequence of the fact that sine and cosine are eigenfunctions of the second derivative operator with eigenvalue −1.
Why this works: the core idea
The equation dx2d2y+y=0 is the simple harmonic oscillator differential equation. Its general solution is exactly y=Asinx+Bcosx. So the problem is essentially asking you to verify that the given function satisfies the equation it was designed to solve.
The key insight: differentiating sinx twice gives −sinx, and differentiating cosx twice gives −cosx. So the second derivative just flips the sign of each term, producing −y.
Step-by-step verification
1. Write down the given function
We have y=Asinx+Bcosx, where A and B are constants.
2. Find the first derivative
Differentiate term by term:
- Derivative of sinx is cosx
- Derivative of cosx is −sinx
So:
dxdy=Acosx−Bsinx
3. Find the second derivative
Differentiate dxdy:
- Derivative of cosx is −sinx
- Derivative of −sinx is −cosx
So:
dx2d2y=−Asinx−Bcosx
4. Observe the pattern
Notice that −Asinx−Bcosx is exactly −(Asinx+Bcosx), which is −y.
Therefore:
dx2d2y=−y
5. Rearrange to get the required form
Adding y to both sides:
dx2d2y+y=0
A common mistake is to forget the sign when differentiating cosx — its derivative is −sinx, not sinx. Also, when differentiating −sinx, remember the derivative is −cosx, not cosx. Each sign error compounds, so check carefully.
You can verify this result instantly by remembering the pattern: for any linear combination of sinx and cosx, the second derivative always returns the negative of the original function. This is why dx2d2 acts like multiplying by −1 on the space spanned by sinx and cosx.
We have shown that dx2d2y+y=0 for y=Asinx+Bcosx.
Method: Verifying That a Function Satisfies a Given Differential Equation
This method applies whenever you are asked to prove or show that a given y satisfies a relation involving y and its derivatives (rather than solve the equation from scratch).
Steps
Step 1: Differentiate the given y twice
Find dxdy first, then differentiate that result again to get dx2d2y, using the standard derivative rules term by term.
Step 2: Substitute every derivative into the given expression
Write out the left-hand side of the relation to be proved (e.g. dx2d2y+y) using the exact expressions found in Step 1 — do not skip writing y itself back in.
Step 3: Simplify algebraically until the expression collapses to the required value
Combine like terms (grouping sinx terms together and cosx terms together, for functions built from Asinx+Bcosx) and show the sum reduces exactly to 0 (or whatever the target of the proof is) — this confirms the identity rather than assuming it.
Common Mistakes
Mistake 1: Sign slip differentiating cosx or −sinx
Why it's wrong: dxd(cosx)=−sinx and dxd(−sinx)=−cosx — two consecutive sign changes are easy to lose track of, especially with A and B also present. Correct approach: differentiate one term at a time and write the sign explicitly at each step rather than tracking it mentally across both derivatives.
Mistake 2: Losing the coefficients A and B partway through
Why it's wrong: dropping or swapping A and B midway (e.g. attaching A to the cosx term instead of sinx) breaks the cancellation that makes the proof work. Correct approach: keep A and B attached to their original terms (A with sinx, B with cosx) through every differentiation step.
- TG EAPCET 2026Set eng-2026-05-09-FN1 markMCQQ.If dxd(secx−tanxsecx+tanx)=k at x=4π, then 22k−22= (A) 52 (B) 122 (C) 3 (D) 9
›Reveal solutionSolution
The derivative simplifies to 2secx(secx+tanx), which at x=π/4 gives k=22(2+1), and then 22k−22=3, so the answer is (C).
Concept and Intuition
The expression inside the derivative looks like a ratio of two trigonometric terms that are actually conjugates in disguise. Instead of diving straight into the quotient rule (which would be messy), we can simplify first by multiplying numerator and denominator by something clever, or by noticing a known identity:
secx+tanx=secx−tanx1
This is because (secx+tanx)(secx−tanx)=sec2x−tan2x=1.
So the fraction is actually
secx−tanxsecx+tanx=(secx+tanx)2
That’s much easier to differentiate.
Step-by-step
- Simplify the fraction Using the identity sec2x−tan2x=1, we have
secx−tanxsecx+tanx=(secx+tanx)2
because multiplying numerator and denominator by (secx+tanx) gives
sec2x−tan2x(secx+tanx)2=(secx+tanx)2
- Differentiate Let f(x)=(secx+tanx)2. Then
f′(x)=2(secx+tanx)⋅(secxtanx+sec2x)
Factor secx from the derivative of the inside:
secxtanx+sec2x=secx(tanx+secx)
So
f′(x)=2(secx+tanx)⋅secx(secx+tanx)=2secx(secx+tanx)2
- Evaluate at x=π/4 At π/4, secx=2 and tanx=1, so
secx+tanx=2+1
Hence
k=f′(π/4)=2⋅2⋅(2+1)2
Compute (2+1)2=2+22+1=3+22.
So
k=22(3+22)=62+8
- Find the required expression We need 22k−22.
22k=2262+8=2262+228=3+24
Simplify 24=22.
So
22k=3+22
Then subtract 22:
(3+22)−22=3
TipSpotting the conjugate relationship secx+tanx=secx−tanx1 turns a messy quotient into a simple square — always check for such simplifications before differentiating.
Watch outA common mistake is to apply the quotient rule directly without simplifying, leading to long algebra where sign errors are easy. The simplification saves time and reduces errors.
✓Final answerThe correct option is (C).
ANSWER: C
- TG EAPCET 2025Set eng-2025-05-02-FN1 markMCQQ.If y=f(coshx) and f′(x)=log(x+x2−1) then dx2d2y= (A) sinhx+xcoshx (B) xsinhx (C) log(x+x2+1) (D) x2−1(x2+x2−1)x(2x2−1+1)
›Reveal solutionSolution
Using f′(x)=cosh−1x and cosh−1(coshx)=x, we get dx2d2y=sinhx+xcoshx — option (A).
Given y=f(coshx) with f′(x)=log(x+x2−1)=cosh−1x.
First derivative (chain rule). With g(x)=coshx,
dxdy=f′(coshx)⋅sinhx.
Since f′(t)=cosh−1t and cosh−1(coshx)=x (for x≥0),
f′(coshx)=x,sodxdy=xsinhx.
Second derivative (product rule).
dx2d2y=dxd(xsinhx)=1⋅sinhx+x⋅coshx=sinhx+xcoshx.
Option (C) is sinh−1x and option (B) is only the first derivative, so both are ruled out.
✓Final answerdx2d2y=sinhx+xcoshx — option (A).
- TG EAPCET 2025Set eng-2025-05-03-AN1 markMCQQ.If y=log(x2+1)+log(x2+1)+log(x2+1)+…∞, ∣x∣<1, then dxdy= (A) 2y−1x2+1 (B) 2y−12x (C) (x2+1)(2y−1)1 (D) (x2+1)(2y−1)2x
›Reveal solutionSolution
The infinite nested radical simplifies to a quadratic in y, which we differentiate implicitly to find dxdy. The result is dxdy=(x2+1)(2y−1)2x, matching option (D).
The key insight: an infinite nested radical of the form
y=u+u+u+⋯
can be rewritten as y=u+y, because the pattern repeats indefinitely. This turns an intimidating infinite expression into a simple algebraic equation, which we can then differentiate.
Here, u=log(x2+1). So we have:
y=log(x2+1)+y.
- Square both sides to remove the square root:
y2=log(x2+1)+y.
- Rearrange to isolate the logarithmic term:
y2−y=log(x2+1).
- Differentiate implicitly with respect to x. Remember that y is a function of x:
dxd(y2−y)=dxdlog(x2+1).
This gives:
2ydxdy−dxdy=x2+11⋅2x.
- Factor out dxdy on the left:
(2y−1)dxdy=x2+12x.
- Solve for dxdy:
dxdy=(x2+1)(2y−1)2x.
Watch outA common mistake is to forget the chain rule when differentiating log(x2+1) — the derivative is x2+12x, not x2+11. Also, note that the condition ∣x∣<1 ensures x2+1>0 so the log is defined, and y>0 so 2y−1 is not zero for typical values.
TipYou never need to actually solve for y explicitly — implicit differentiation is much cleaner here. The nested radical structure always leads to a quadratic relation, making implicit differentiation the natural tool.
✓Final answerThe correct option is (D).
ANSWER: D
- TG EAPCET 2025Set eng-2025-05-03-FN1 markMCQQ.If y=sec−1x, then dx2d2y= (A) x2(x2−1)231−x2 (B) x∣x∣(x2−1)231−2x2 (C) x∣x∣(x2−1)231+2x2 (D) −x2(x2−1)231−x2
›Reveal solutionSolution
The second derivative of y=sec−1x is found by differentiating the known first derivative dxdy=∣x∣x2−11 using the chain rule and careful handling of the absolute value, leading to the result x∣x∣(x2−1)3/21−2x2, which matches option (B).
The key idea is that the derivative of sec−1x has a standard form involving an absolute value, because the range of sec−1x is chosen to make the function one-to-one. When we differentiate a second time, we must treat ∣x∣ correctly — it is not simply x, and its derivative introduces a sign factor. The algebra then simplifies to one of the given forms.
- Recall the first derivative. For y=sec−1x, the derivative is
dxdy=∣x∣x2−11,∣x∣>1.
The absolute value appears because the inverse secant is defined with range [0,π/2)∪(π/2,π], and the slope of the tangent must be positive for x>1 and negative for x<−1.
- Rewrite the absolute value for differentiation. A useful trick: ∣x∣=x2. Then
dxdy=x2x2−11=x2(x2−1)1.
This avoids piecewise cases during differentiation, but we must remember that x2=∣x∣, not x.
- Differentiate again using the chain rule. Let u=x2(x2−1)=x4−x2. Then
dxdy=u−1/2.
So
dx2d2y=−21u−3/2⋅dxdu.
Compute dxdu=4x3−2x=2x(2x2−1).
- Substitute back.
dx2d2y=−21⋅(x2(x2−1))3/21⋅2x(2x2−1).
The factor −21⋅2=−1, so
dx2d2y=−(x2(x2−1))3/2x(2x2−1).
- Simplify the denominator.
(x2(x2−1))3/2=(x2)3/2⋅(x2−1)3/2=∣x∣3⋅(x2−1)3/2.
Since ∣x∣3=∣x∣⋅x2 (because ∣x∣3=∣x∣⋅x2), we have
dx2d2y=−∣x∣3(x2−1)3/2x(2x2−1)=−∣x∣⋅x2(x2−1)3/2x(2x2−1).
- Handle the sign from x/∣x∣. Notice x/∣x∣=sgn(x), but here we have x/∣x∣3=∣x∣⋅x2x=x2sgn(x)? Wait carefully:
∣x∣3x=∣x∣⋅x2x=x2sgn(x).
But we want the expression in the form given in the options. Multiply numerator and denominator:
dx2d2y=−x2∣x∣(x2−1)3/22x2−1⋅∣x∣x?No, let’s do it cleanly.
Actually, from step 5:
dx2d2y=−∣x∣3(x2−1)3/2x(2x2−1).
Write ∣x∣3=∣x∣⋅x2 (since ∣x∣3=∣x∣⋅x2 for all real x). Then
dx2d2y=−∣x∣⋅x2(x2−1)3/2x(2x2−1).
Now x/∣x∣=sgn(x), so
dx2d2y=−x2(x2−1)3/2sgn(x)(2x2−1).
But the options have x∣x∣ in the denominator, not x2 times a sign. Multiply numerator and denominator by ∣x∣:
dx2d2y=−x∣x∣(x2−1)3/2(2x2−1).
Because x2⋅∣x∣=∣x∣3? Wait: x∣x∣ in denominator times ∣x∣ gives x∣x∣2=x⋅x2=x3? That’s messy. Let’s check directly:
From −∣x∣3(x2−1)3/2x(2x2−1), note ∣x∣3=∣x∣⋅x2, so denominator is ∣x∣⋅x2. Multiply numerator and denominator by ∣x∣:
=−∣x∣2⋅x2(x2−1)3/2x∣x∣(2x2−1)=−x4(x2−1)3/2x∣x∣(2x2−1).
That doesn’t match. Instead, factor differently:
∣x∣3x=∣x∣⋅x1⋅∣x∣2x2?Better: ∣x∣3x=x∣x∣1.
Check: x∣x∣=x⋅∣x∣. Multiply numerator and denominator: x∣x∣1=x2∣x∣∣x∣=x21? No. Let’s test with x=2: ∣2∣32=82=41. And x∣x∣1=2⋅21=41. Yes! So indeed
∣x∣3x=x∣x∣1.
Therefore,
dx2d2y=−x∣x∣(x2−1)3/22x2−1.
Multiply the negative sign into the numerator:
dx2d2y=x∣x∣(x2−1)3/21−2x2.
- Match with the options. This is exactly option (B).
Watch outA common mistake is to forget the absolute value in the first derivative and write xx2−11, which leads to a different second derivative. Always remember: dxdsec−1x=∣x∣x2−11.
TipThe identity ∣x∣3x=x∣x∣1 is a neat shortcut that avoids sign-function gymnastics. Verify it by testing a positive and a negative x to build confidence.
✓Final answerThe correct option is (B).
ANSWER: B
- TG EAPCET 2025Set eng-2025-05-03-FN1 markMCQQ.If y=log(x2+1)+log(x2+1)+log(x2+1)+…∞, ∣x∣<1, then dxdy= (A) 2y−1x2+1 (B) 2y−12x (C) (x2+1)(2y−1)1 (D) (x2+1)(2y−1)2x
›Reveal solutionSolution
The infinite nested radical simplifies to a quadratic in y, which we differentiate implicitly to find dxdy. The result is (x2+1)(2y−1)2x, matching option (D).
The key insight is that an infinitely nested expression like this is self‑referential: the whole infinite chain equals y, and the part after the first square root is the same infinite chain again. That lets us replace the infinite tail with y itself, turning a scary infinite radical into a simple algebraic equation.
- Set up the self‑referential equation Since the pattern repeats infinitely, we have
y=log(x2+1)+=ylog(x2+1)+log(x2+1)+….
Therefore
y=log(x2+1)+y.
- Square both sides Squaring removes the outer square root:
y2=log(x2+1)+y.
Rearranging gives
y2−y−log(x2+1)=0.
- Differentiate implicitly Treat y as a function of x. Differentiate term‑by‑term:
dxd(y2)−dxd(y)−dxd[log(x2+1)]=0.
Using the chain rule:
2ydxdy−dxdy−x2+11⋅2x=0.
- Solve for dxdy Factor out dxdy:
(2y−1)dxdy−x2+12x=0.
Hence
(2y−1)dxdy=x2+12x,
and finally
dxdy=(x2+1)(2y−1)2x.
Watch outA common mistake is to forget the factor 2x from differentiating log(x2+1) — the chain rule gives x2+12x, not just x2+11.
TipThe condition ∣x∣<1 ensures x2+1>0 so the logarithm is defined, and also keeps the nested radical convergent — but it doesn’t affect the differentiation formula itself.
✓Final answerThe correct option is (D).
ANSWER: D
- TG EAPCET 2024Set eng-2024-05-10-AN1 markMCQQ.If y=log(x−x2−1), then (x2−1)y′′+xy′+ey+x2−1= (A) 0 (B) 1 (C) x2−1 (D) x
›Reveal solutionSolution
The two derivative terms cancel: (x2−1)y′′+xy′=0, and ey+x2−1=x, so the whole expression equals x.
Differentiating y=log(x−x2−1).
Let u=x−x2−1, so y=logu. Then
u′=1−x2−1x=x2−1x2−1−x=x2−1−u.
Hence
y′=uu′=−x2−11=−(x2−1)−1/2.
Differentiate again:
y′′=−(−21)(x2−1)−3/2(2x)=(x2−1)3/2x.
Combining the derivative terms.
(x2−1)y′′=x2−1x,xy′=−x2−1x,
(x2−1)y′′+xy′=x2−1x−x2−1x=0.
The remaining terms.
Since y=log(x−x2−1), we have ey=x−x2−1. Therefore
ey+x2−1=(x−x2−1)+x2−1=x.
Total.
(x2−1)y′′+xy′+ey+x2−1=0+x=x.
✓Final answerThe expression equals x — option (D).
- TG EAPCET 2024Set eng-2024-05-10-AN1 markMCQQ.The order and degree of the differential equation dxdy=(dx2d2y+2)1/2+dx2d2y+5 are respectively (A) 2, 1 (B) 2, 4 (C) 2, 2 (D) 2, 3
›Reveal solutionSolution
The key idea is to rewrite the equation so that the highest-order derivative appears with a positive integer exponent; after squaring to remove the radical, the order is 2 and the degree is 2, so the correct option is (C).
Concept and intuition
Order is simply the highest derivative present — here we see both dxdy (first derivative) and dx2d2y (second derivative), so the order is clearly 2.
Degree is trickier: it is the exponent of the highest-order derivative after the equation is made polynomial in derivatives (no radicals, no fractional powers). The given equation has a square root containing dx2d2y, so we must eliminate that radical before reading off the degree. Squaring will introduce a term like (dx2d2y)2, making the degree 2 — but we must check that no higher power appears.
Step-by-step solution
-
Identify the order
The highest derivative in the equation is dx2d2y. Therefore the order is 2.
-
Prepare to find the degree
The equation is
dxdy=(dx2d2y+2)1/2+dx2d2y+5.
The term (dx2d2y+2)1/2 is a radical involving the second derivative. To find the degree, we must rewrite the equation so that all derivatives appear with integer exponents.
- Isolate the radical Move the non‑radical terms to the left:
dxdy−dx2d2y−5=(dx2d2y+2)1/2.
- Square both sides Squaring eliminates the square root:
(dxdy−dx2d2y−5)2=dx2d2y+2.
-
Expand and simplify
Expanding the left side gives terms like (dx2d2y)2, dxdydx2d2y, etc. The highest power of dx2d2y that appears is 2 (from the square of −dx2d2y). No higher power occurs.
Hence the degree — the exponent of the highest‑order derivative in the polynomial form — is 2.
-
Conclusion
Order = 2, Degree = 2.
Watch outA common mistake is to read the exponent 1/2 on the radical and think the degree is 1/2 or 1. Remember: degree is defined only after the equation is free of radicals and fractional powers.
✓Final answerThe correct option is (C).
ANSWER: C
-
- TG EAPCET 2022Set eng-2022-07-19-AN1 markMCQQ.dxd[(x25−x23+1)(x2−3x+5)]= (A) 29x27−14x25+20x23−215x2+2x−3 (B) 29x27−7x25+5x23−23x2+2x−3 (C) 9x27−14x25+20x23−15x2+2x−3 (D) 29x27−27x25+25x23−215x2+2x−3
›Reveal solutionSolution
Differentiate a product of two polynomials with fractional powers using the product rule, then simplify term by term. The derivative matches option (A).
The problem asks for the derivative of a product of two functions:
u(x)=x5/2−x3/2+1 and v(x)=x2−3x+5.
The product rule is the natural choice: dxd[u⋅v]=u′v+uv′.
We could expand the product first and then differentiate, but that would involve multiplying two polynomials with fractional exponents — messy. The product rule keeps the algebra cleaner because we differentiate each factor separately (both are straightforward power-rule jobs) and then combine like terms.
Let’s do it step by step.
-
Differentiate u(x)
u(x)=x5/2−x3/2+1
Using dxdxn=nxn−1:
u′(x)=25x3/2−23x1/2+0=25x3/2−23x1/2.
-
Differentiate v(x)
v(x)=x2−3x+5
v′(x)=2x−3.
-
Apply the product rule
dxd[uv]=u′v+uv′
=(25x3/2−23x1/2)(x2−3x+5)+(x5/2−x3/2+1)(2x−3).
- Expand the first product u′v
25x3/2⋅x2=25x7/2,25x3/2⋅(−3x)=−215x5/2,25x3/2⋅5=225x3/2.
−23x1/2⋅x2=−23x5/2,−23x1/2⋅(−3x)=29x3/2,−23x1/2⋅5=−215x1/2.
So u′v=25x7/2+(−215−23)x5/2+(225+29)x3/2−215x1/2
=25x7/2−9x5/2+17x3/2−215x1/2.
- Expand the second product uv′
x5/2⋅2x=2x7/2,x5/2⋅(−3)=−3x5/2.
−x3/2⋅2x=−2x5/2,−x3/2⋅(−3)=3x3/2.
1⋅2x=2x,1⋅(−3)=−3.
So uv′=2x7/2+(−3−2)x5/2+3x3/2+2x−3
=2x7/2−5x5/2+3x3/2+2x−3.
-
Add the two expansions
Combine like terms by exponent:
- x7/2: 25+2=25+24=29x7/2
- x5/2: −9−5=−14x5/2
- x3/2: 17+3=20x3/2
- x1/2: −215x1/2 (no matching term from uv′)
- x: 2x
- constant: −3
So the derivative is
29x7/2−14x5/2+20x3/2−215x1/2+2x−3.
Watch outA common slip is forgetting the x1/2 term from u′v — it’s −215x1/2, not zero. Also, when adding x7/2 coefficients, 25+2 is 29, not 9 (option C incorrectly doubles it).
✓Final answerThe derivative is 29x7/2−14x5/2+20x3/2−215x1/2+2x−3, which matches option (A).
-
- TG EAPCET 2022Set eng-2022-07-20-FN1 markMCQQ.Let f(x) be a differentiable function such that f(0)=0 and f′(0)=20. For x∈(0,2π), if A(x)=2f(x)csc4x+4f(x)(cos2x+1)−4cos2x then limx→0A(x)= (A) 0 (B) 4 (C) 6 (D) 8
›Reveal solutionSolution
The limit reduces to a 0/0 form; applying L'Hôpital's rule and using the given f(0)=0 and f′(0)=20 yields the value 8.
We are given f(0)=0, f′(0)=20, and f is differentiable. The expression A(x) involves csc4x, which blows up as x→0, so the limit is not obvious by direct substitution. The key is to rewrite the trigonometric terms near x=0 and use the derivative condition.
- Rewrite A(x) in a form that exposes the limit. Since csc4x=sin4x1, we have
A(x)=sin4x2f(x)+4f(x)(cos2x+1)−4cos2x.
As x→0, sin4x∼4x, and f(x)∼f′(0)x=20x, so the first term behaves like 4x2⋅20x=10, which is finite. The other terms are finite too, so the limit exists.
- Combine terms to apply L'Hôpital's rule cleanly. Write
A(x)=sin4x2f(x)+4f(x)(cos2x+1)−4cos2x.
As x→0, sin4x→0 and f(x)→0, so the first term is 0/0. The rest are well-behaved. To handle the 0/0 part, we isolate it:
limx→0A(x)=limx→0sin4x2f(x)+limx→0[4f(x)(cos2x+1)−4cos2x].
- Evaluate the second limit directly. As x→0, f(x)→0 and cos2x→1, so
4f(x)(cos2x+1)−4cos2x→4⋅0⋅(1+1)−4⋅1=−4.
- Evaluate the first limit using L'Hôpital's rule. Since both numerator and denominator go to 0,
limx→0sin4x2f(x)=limx→04cos4x2f′(x)=4⋅12f′(0)=42⋅20=10.
- Add the two parts.
limx→0A(x)=10+(−4)=6.
Watch outA common mistake is to forget that csc4x is 1/sin4x, not 1/sinx. Also, when applying L'Hôpital, differentiate correctly: derivative of sin4x is 4cos4x, not cos4x.
TipIf you prefer, you can combine everything into a single fraction before applying L'Hôpital, but splitting as above is simpler because only one term is indeterminate.
✓Final answerThe value is 6, which corresponds to option (C).
- TG EAPCET 2021Set eng-2021-08-05-AN1 markMCQQ.If x=a(t−sint) and y=a(1−cost) then dx2d2y= (A) 4asin4(2t)1 (B) 4asin4(2t)−1 (C) 4acos4(2t)1 (D) 4acos4(2t)−1
›Reveal solutionSolution
For parametric equations, the second derivative dx2d2y is found by differentiating dxdy with respect to t and dividing by dtdx. The result simplifies to −4asin4(t/2)1, which is option (B).
The core idea here is that when x and y are both given in terms of a parameter t, you cannot directly write dx2d2y as a simple ratio of second derivatives. Instead, you first find dxdy=dx/dtdy/dt, then differentiate that expression with respect to t, and finally divide by dx/dt again. This is because dx2d2y=dxd(dxdy)=dtd(dxdy)⋅dxdt.
The given equations describe a cycloid — the path traced by a point on a rolling circle of radius a. The trigonometric simplifications that follow rely heavily on half-angle identities, so keep those handy.
- Find dxdy. First compute the derivatives with respect to t:
dtdx=a(1−cost),dtdy=asint.
Therefore,
dxdy=dx/dtdy/dt=a(1−cost)asint=1−costsint.
- Simplify dxdy using half-angle identities. Recall sint=2sin(t/2)cos(t/2) and 1−cost=2sin2(t/2). Substituting:
dxdy=2sin2(t/2)2sin(t/2)cos(t/2)=sin(t/2)cos(t/2)=cot(2t).
This is a much cleaner form to work with.
- Differentiate dxdy with respect to t.
dtd(dxdy)=dtd[cot(2t)]=−csc2(2t)⋅21=−21csc2(2t).
- Apply the chain rule to get dx2d2y. Since dx2d2y=dtd(dxdy)⋅dxdt, and dxdt=1/dtdx, we have:
dx2d2y=(−21csc2(2t))⋅a(1−cost)1.
- Rewrite 1−cost in half-angle form. As before, 1−cost=2sin2(t/2). So:
dx2d2y=−21csc2(2t)⋅a⋅2sin2(t/2)1=−4a1⋅sin2(t/2)⋅sin2(t/2)1.
- Simplify to the final form.
dx2d2y=−4asin4(t/2)1.
Watch outA common mistake is to compute dx2d2y as d2x/dt2d2y/dt2, which is wrong. The correct formula is dx2d2y=dtd(dxdy)⋅dx/dt1.
✓Final answerThe correct option is (B): −4asin4(2t)1.
- TG EAPCET 2021Set eng-2021-08-06-FN1 markMCQQ.If y=x+tanx, then cos2xdx2d2y+2x= (A) −2y (B) 32y (C) 3y (D) 2y
›Reveal solutionSolution
The key idea is to compute the second derivative of y=x+tanx and substitute into the given expression, simplifying using trigonometric identities. The result simplifies to 2y, so the correct option is (D).
We start with y=x+tanx. The question asks for cos2xdx2d2y+2x, and we need to express this in terms of y alone. The presence of cos2x multiplying the second derivative hints that derivatives of tanx will produce powers of secx, which combine neatly with cos2x.
- First derivative Differentiate y with respect to x:
dxdy=1+sec2x
because dxd(tanx)=sec2x.
- Second derivative Differentiate again:
dx2d2y=0+2secx⋅secxtanx=2sec2xtanx
using the chain rule: dxd(sec2x)=2secx⋅(secxtanx)=2sec2xtanx.
- Multiply by cos2x Recall secx=cosx1, so sec2x=cos2x1. Then:
cos2x⋅dx2d2y=cos2x⋅(2⋅cos2x1⋅tanx)=2tanx
The cos2x cancels the sec2x beautifully.
- Add 2x The expression becomes:
cos2xdx2d2y+2x=2tanx+2x
- Relate to y Since y=x+tanx, we have 2tanx+2x=2(x+tanx)=2y.
Watch outA common mistake is to forget the factor of 2 when differentiating sec2x, or to incorrectly simplify cos2x⋅sec2x as 1 instead of correctly cancelling. Always write sec2x=1/cos2x to avoid errors.
✓Final answerThe value is 2y, which corresponds to option (D).
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.