Q.Show that the straight lines whose direction cosines are given by 2l+2m−n=0 and mn+nl+lm=0 are at right angles.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Angle Between Lines
Angle Between Two Lines
In space, the angle between two lines is measured through their directions, not their positions — two lines that never meet still have a well-defined angle between them (the angle you would see if you slid one across to meet the other).
So the angle between the lines is just the angle between their direction vectors. If the lines run along b1 and b2,
cosθ=∣b1∣∣b2∣∣b1⋅b2∣
Why the absolute value
A line has two opposite directions, so b and −b describe the same line. The modulus in the numerator picks the acute angle (0∘≤θ≤90∘), which is the convention for the angle between lines.
In Cartesian form
If the lines have direction ratios (a1,b1,c1) and (a2,b2,c2),
cosθ=a12+b12+c12a22+b22+c22∣a1a2+b1b2+c1c2∣.
If instead you know the direction cosines (l1,m1,n1) and (l2,m2,n2), the denominators are both 1 and cosθ=∣l1l2+m1m2+n1n2∣.
Two special cases
- Parallel: the direction ratios are proportional, a2a1=b2b1=c2c1.
- Perpendicular: the dot product vanishes, a1a2+b1b2+c1c2=0.
Example …
Concept: Angle Between Lines — two lines are perpendicular if the sum of the products of their corresponding direction cosines is zero.
We are given:
2l+2m−n=0andmn+nl+lm=0.
Step 1: From the first equation, n=2l+2m. Substitute into the second:
m(2l+2m)+l(2l+2m)+lm=0.
Step 2: Simplify:
2lm+2m2+2l2+2lm+lm=0⇒2l2+5lm+2m2=0.
Step 3: Divide by m2 (assuming m=0; the case m=0 can be checked separately and yields the same conclusion):
2(ml)2+5(ml)+2=0.
This quadratic in l/m gives two ratios, say l1/m1 and l2/m2, whose product is 1 (constant term/coefficient of t2). Hence:
m1l1⋅m2l2=1⇒l1l2=m1m2. …
The condition for perpendicular lines in 3D is l1l2+m1m2+n1n2=0. By eliminating one variable from the given equations and using the sum and product of ratios, we show this sum equals zero, proving the lines are at right angles.
Why This Approach Works
When two lines are perpendicular in space, the dot product of their direction vectors is zero. For direction cosines (l1,m1,n1) and (l2,m2,n2), this means:
l1l2+m1m2+n1n2=0
The problem gives us two equations that both pairs of direction cosines satisfy. Instead of solving for individual values (which would be messy), we can work with the ratios of the direction cosines. The key insight: if we treat l/m or m/n as unknowns, the given equations become quadratic in these ratios. The two roots of that quadratic correspond to the two lines, and we can use sum and product of roots to directly check the perpendicular condition.
When direction cosines satisfy two equations, eliminate one variable to get a quadratic in the ratio of the other two. The two roots give the two lines — no need to find them individually.
Step-by-Step Solution
1. Set up the equations
We have two lines whose direction cosines satisfy:
2l+2m−n=0(1)
mn+nl+lm=0(2)
Let (l1,m1,n1) and (l2,m2,n2) be the direction cosines of the two lines.
2. Eliminate n using equation (1)
From (1): n=2l+2m
Substitute into (2):
m(2l+2m)+l(2l+2m)+lm=0
Expand:
2lm+2m2+2l2+2lm+lm=0
Combine like terms:
2l2+5lm+2m2=0
3. Form a quadratic in the ratio l/m
Divide through by m2 (assuming m=0; we'll check the edge case later):
2(ml)2+5(ml)+2=0
Let t=l/m. Then:
2t2+5t+2=0
The two roots t1 and t2 correspond to l1/m1 and l2/m2 respectively.
For a quadratic at2+bt+c=0:
- Sum of roots: t1+t2=−ab
- Product of roots: t1t2=ac
Here, a=2, b=5, c=2, so:
t1+t2=−25,t1t2=22=1
4. Express the perpendicular condition in terms of ratios
We need to check: l1l2+m1m2+n1n2=0
From n=2l+2m, we have:
n1=2l1+2m1,n2=2l2+2m2
Substitute into the dot product:
l1l2+m1m2+(2l1+2m1)(2l2+2m2)
Expand the last term:
=l1l2+m1m2+4l1l2+4l1m2+4m1l2+4m1m2
Combine:
=5l1l2+5m1m2+4(l1m2+m1l2)
5. Factor using the ratios
Divide the entire expression by m1m2 (again assuming m1,m2=0):
=m1m2[5(m1l1)(m2l2)+5+4(m1l1+m2l2)]
Let t1=l1/m1 and t2=l2/m2. Then the expression inside brackets becomes:
5t1t2+5+4(t1+t2)
6. Plug in the sum and product
We have t1t2=1 and t1+t2=−25.
Substitute:
5(1)+5+4(−25)=5+5−10=0
Therefore l1l2+m1m2+n1n2=0, proving the lines are perpendicular. …
Method: Testing perpendicularity of two lines defined by direction-cosine equations
Use this when two lines are described only by two equations their direction cosines satisfy (one linear, one quadratic) and you must show they are perpendicular — without finding the lines separately.
Steps
Step 1: Reduce to a quadratic in a ratio.
Eliminate one letter using the linear equation, substitute into the quadratic, and divide through by m2 (or l2) to get a quadratic in a single ratio t=l/m. Its two roots t1,t2 correspond to the two lines.
Step 2: Read off sum and product of roots.
For at2+bt+c=0, use t1+t2=−ab and t1t2=ac — you never need the roots individually. …
Common Mistakes
Mistake 1: Solving for the individual direction cosines.
Why it's wrong: it is long and unnecessary — the test l1l2+m1m2+n1n2=0 can be checked straight from the sum and product of the ratio-roots. Correct approach: reduce to 2t2+5t+2=0 and use t1t2 and t1+t2.
Mistake 2: Ignoring the edge case m=0 before dividing by m2.
Why it's wrong: dividing by m2 silently assumes m=0. Correct approach: check m=0 separately (it forces all cosines to zero, which is impossible), so the division is safe. …
Showing the 12 most recent of 44 on this concept.
- TG EAPCET 2023Set eng-2023-05-12-FN1 markMCQQ.If the direction cosines (l,m,n) of two lines are connected by the relations l+m+n=0 and lm=0, then the angle between those lines is (A) 3π (B) 4π (C) 2π (D) 6π
›Reveal solutionSolution
The condition l+m+n=0 and lm=0 forces each line’s direction cosines to be a permutation of (1,−1,0)/2, so the angle between them is π/3, making option (A) correct.
We are given two lines whose direction cosines (l,m,n) satisfy:
l+m+n=0andlm=0.
We need the angle between these two lines.
Concept & Intuition
Direction cosines satisfy l2+m2+n2=1. The conditions l+m+n=0 and lm=0 are symmetric but not fully symmetric — they force one of l or m to be zero. That gives us a family of possible triples, but the angle between two distinct lines from this family is fixed. The trick is to find two distinct triples that satisfy both conditions, then compute the dot product to get the cosine of the angle between them.
Step-by-step reasoning
- Use the normalization condition Since (l,m,n) are direction cosines, we have:
l2+m2+n2=1.
Together with l+m+n=0, we can eliminate n: n=−l−m.
-
Apply lm=0
This means either l=0 or m=0 (or both, but both zero would force n=0 from l+m+n=0, which is impossible because then l2+m2+n2=0=1). So we have two cases:
- Case 1: l=0. Then m+n=0⇒n=−m. Normalization: 02+m2+(−m)2=2m2=1⇒m=±21. So one line has direction cosines (0,21,−21) or (0,−21,21). These are essentially the same line (opposite direction), so pick one representative:
Line A:(0,21,−21).
- Case 2: m=0. Then l+n=0⇒n=−l. Normalization: l2+02+(−l)2=2l2=1⇒l=±21. Pick the representative:
Line B:(21,0,−21).
These are two distinct lines satisfying the given relations.
- Compute the angle between them …
- TG EAPCET 2023Set eng-2023-05-14-AN1 markMCQQ.If θ is the acute angle between the two lines whose direction cosines are connected by the relations l+m+n=0 and 2lm+2nl−mn=0, then cosθ= (A) 21 (B) 23 (C) 65 (D) 53
›Reveal solutionSolution
The acute angle between the two lines is found by solving the given constraints for direction cosines, then using the dot product formula; the result is cosθ=21, so the correct option is (A).
We are given two lines whose direction cosines (l,m,n) satisfy two conditions:
- l+m+n=0
- 2lm+2nl−mn=0
We need the cosine of the acute angle between these two lines.
Concept and Intuition
Direction cosines of a line satisfy l2+m2+n2=1. For two lines with direction cosines (l1,m1,n1) and (l2,m2,n2), the cosine of the angle between them is
cosθ=l1l2+m1m2+n1n2.
Here, both lines share the same pair of equations, so we must find two distinct sets (l,m,n) that satisfy both constraints. The trick: treat the equations as a system that yields a relation between the ratios of l,m,n, then find two independent direction vectors.
Step-by-step solution
-
Eliminate one variable using l+m+n=0
From l+m+n=0, we have n=−l−m.
-
Substitute into the second equation
The second condition is 2lm+2nl−mn=0. Substitute n:
2lm+2(−l−m)l−m(−l−m)=0.
Simplify:
2lm−2l2−2lm+ml+m2=0.
The 2lm and −2lm cancel. We get:
−2l2+ml+m2=0.
Multiply by −1:
2l2−ml−m2=0.
- Solve the quadratic in l and m Treat this as a quadratic in l:
2l2−ml−m2=0.
Using the quadratic formula:
l=4m±m2+8m2=4m±3m.
So the two possibilities are:
l=4m+3m=morl=4m−3m=−2m.
-
Find the corresponding direction ratios
- Case 1: l=m. Then n=−l−m=−2l. So direction ratios are (l,l,−2l), i.e., proportional to (1,1,−2).
- Case 2: l=−2m. Then m=−2l, and n=−l−(−2l)=l. So direction ratios are (l,−2l,l), i.e., proportional to (1,−2,1).
These are two distinct lines.
-
Compute cosθ using the dot product …
- TG EAPCET 2025Set eng-2025-05-02-FN1 markMCQQ.If the direction cosines of two lines satisfy the equations 2l+m−n=0, l2−2m2+n2=0 and θ is the angle between the lines then cosθ= (A) 51 (B) 4π (C) 32 (D) 3π
›Reveal solutionSolution
The direction cosines of each line satisfy two given equations; solving them yields two distinct direction vectors, and the cosine of the angle between them is found via dot product, giving cosθ=51.
We are given that the direction cosines (l,m,n) of two lines satisfy
2l+m−n=0andl2−2m2+n2=0.
The angle θ between the lines is the angle between their direction vectors. Since direction cosines satisfy l2+m2+n2=1, each line’s (l,m,n) is a unit vector. The two equations above must hold for both lines, but they define a set of possible unit vectors; the two distinct solutions give the two lines.
Why this approach works:
We treat the equations as a system in l,m,n with the constraint l2+m2+n2=1. Solving gives two unit vectors. Their dot product is cosθ.
-
Express one variable in terms of another
From 2l+m−n=0, we have n=2l+m.
-
Substitute into the second equation
l2−2m2+(2l+m)2=0.
Expand:
l2−2m2+4l2+4lm+m2=0⇒5l2+4lm−m2=0.
- Solve the quadratic relation between l and m Treat 5l2+4lm−m2=0 as quadratic in l:
5l2+4ml−m2=0.
Using the quadratic formula:
l=10−4m±16m2+20m2=10−4m±6m.
So the two possibilities are:
l=102m=5morl=10−10m=−m.
-
Find corresponding (l,m,n) for each case
- Case 1: l=5m Then n=2l+m=52m+m=57m. The unit vector condition l2+m2+n2=1 gives:
(5m)2+m2+(57m)2=1⇒25m2+m2+2549m2=1.
Combine: $\frac{1+25+49}{25}m^2 = \frac{75}{25}m^2 = 3m^2 = 1$, so $m^2 = \frac{1}{3}$. Choose $m = \frac{1}{\sqrt{3}}$ (sign doesn’t matter for direction). Thenl=531,n=537.
So one direction vector isv1=(531,31,537).
- Case 2: l=−m Then n=2(−m)+m=−m. …
-
- TG EAPCET 2024Set eng-2024-05-09-FN1 markMCQQ.The direction cosines of two lines are connected by the relations l−m+n=0 and 2l−3m+nl=0. If θ is the angle between these two lines, then cosθ= (A) 41 (B) 191 (C) 31 (D) 321
›Reveal solutionSolution
Eliminating m gives 2l2=3n2, so the two lines have direction ratios (±3, ±3+2, 2). Their dot product is −2 and the product of the magnitudes is 219, giving cosθ=191 — option (B).
The concept first
When two direction cosines relations are given — one linear and one homogeneous quadratic — the standard recipe is:
- use the linear relation to express one variable in terms of the other two;
- substitute into the quadratic, which becomes a homogeneous quadratic in the two remaining variables — hence an equation for a ratio;
- its two roots give the direction ratios of the two lines;
- finally
cosθ=l12+m12+n12 l22+m22+n22l1l2+m1m2+n1n2,
where we may use direction ratios (not necessarily normalised) provided we divide by the magnitudes.
Step-by-step
- Eliminate m. From l−m+n=0,
m=l+n.
- Substitute into 2lm−3mn+nl=0:
2l(l+n)−3(l+n)n+nl=2l2+2ln−3ln−3n2+nl
=2l2+(2−3+1)log−3n2=2l2−3n2=0.
The log terms cancel exactly — that is what makes this problem tractable.
- Solve for the ratio.
2l2=3n2 ⟹ nl=±23.
Choose the convenient scaling n=2, so l=±3, and m=l+n:
Line 1: (3, 3+2, 2),Line 2: (−3, 2−3, 2).
- Dot product. …
- TG EAPCET 2026Set eng-2026-05-10-AN1 markMCQQ.If the angle between the straight lines whose direction cosines satisfy the equations l−2m+n=0 and 2l2−3m2+n2=0 is θ, then cosθ= (A) 1059 (B) 733 (C) 2π (D) 4π
›Reveal solutionSolution
The problem asks for the cosine of the angle between two lines whose direction cosines satisfy two given equations. By solving the system for possible direction ratios and using the dot product formula, we find cosθ=1059, which corresponds to option (A).
We are given two conditions that the direction cosines (l,m,n) of each line must satisfy:
l−2m+n=0and2l2−3m2+n2=0.
Since direction cosines also satisfy l2+m2+n2=1, but we don’t need that directly — we only need the ratios of direction cosines to find the angle between the lines. The key idea: each line corresponds to a set (l,m,n) (up to a common factor) that satisfies both equations. The angle between two such lines is found from the dot product of their direction vectors.
1. Eliminate one variable using the linear equation
From l−2m+n=0, we have
n=2m−l.
2. Substitute into the quadratic equation
Plug into 2l2−3m2+n2=0:
2l2−3m2+(2m−l)2=0.
Expand (2m−l)2=4m2−4lm+l2, so:
2l2−3m2+4m2−4lm+l2=0,
3l2+m2−4lm=0.
3. Treat as a quadratic in l/m
Divide through by m2 (assuming m=0; we’ll check later):
3(ml)2−4(ml)+1=0.
Let t=l/m. Then:
3t2−4t+1=0.
Solve:
t=64±16−12=64±2.
So t=1 or t=31.
4. Find direction ratios for each case
Case 1: l/m=1⇒l=m.
From n=2m−l=2m−m=m.
So direction ratios are (l,m,n)=(1,1,1).
Case 2: l/m=1/3⇒l=m/3.
Then n=2m−l=2m−m/3=35m.
So direction ratios are (1/3,1,5/3), or multiply by 3: (1,3,5).
Thus the two lines have direction vectors a=(1,1,1) and b=(1,3,5). …
- TG EAPCET 2022Set eng-2022-07-20-AN1 markMCQQ.If the d.r.'s of two lines are connected by the relations a−b+c=0, a2−b2+2c2=0 and θ is the angle between these lines then cosθ= (A) 72 (B) 273 (C) 423 (D) 321
›Reveal solutionSolution
The relations give the two direction ratios (1,1,0) and (1,3,2); the angle between them has cosθ=72.
From a−b+c=0 we get b=a+c. Substitute into a2−b2+2c2=0:
a2−(a+c)2+2c2=0⇒−2ac+c2=0⇒c(c−2a)=0.
So c=0 or c=2a, giving the two lines:
- c=0⇒b=a: direction ratios (a,a,0)∝(1,1,0).
- c=2a⇒b=3a: direction ratios (a,3a,2a)∝(1,3,2).
Angle between them: …
- TG EAPCET 2021Set eng-2021-08-05-FN1 markMCQQ.The slope of a line L is 2. If m1,m2 are slopes of two lines which are inclined at an angle of 6π with L, then m1+m2= (A) −11 (B) 16 (C) 11 (D) −16
›Reveal solutionSolution
The key idea is to use the angle-between-lines formula tanθ=1+m1m2m1−m2 with θ=6π and the known slope 2, then solve the resulting quadratic to find the two slopes and their sum. The sum is −16.
When a line makes a fixed angle with a given line, there are always two such lines — one on each side of the given line. Their slopes are the two roots of a quadratic equation that comes from the angle formula. The sum of those slopes can be read directly from the quadratic without finding each slope individually.
- Set up the angle condition Let the slope of the given line L be m=2. Let the slope of a line inclined at 6π to L be m1 (or m2). The formula for the acute angle θ between two lines with slopes m and m1 is:
tanθ=1+m1mm1−m
Here θ=6π, so tan6π=31.
- Write the equation without the absolute value The absolute value means there are two possibilities:
1+2m1m1−2=±31
These two equations give the two distinct slopes m1 and m2.
- Combine into a single quadratic Square both sides (or handle the two cases separately — both lead to the same quadratic). From 1+2m1m1−2=31:
3(m1−2)=1+2m1⇒3m1−23=1+2m1
(3−2)m1=1+23
This gives one slope. The other case with the negative sign gives the other slope.
Instead of solving each, multiply the two equations:
(1+2m1m1−2)(1+2m2m2−2)=(31)(−31)=−31
But a cleaner method: treat m1 and m2 as the two roots of the quadratic obtained by removing the absolute value.
- Form the quadratic From 1+2mm−2=±31, cross-multiply and square:
3(m−2)2=(1+2m)2
Expand: …
- TG EAPCET 2021Set eng-2021-08-04-AN1 markMCQQ.The angle between the pair of straight lines 3y2−8xy−3x2−29x+3y−18=0 is (A) 90∘ (B) 35∘ (C) 45∘ (D) 30∘
›Reveal solutionSolution
The angle between a pair of straight lines given by a general second-degree equation is determined by the coefficients of the x2, xy, and y2 terms. When the sum of the coefficients of x2 and y2 is zero, the lines are perpendicular. For the given equation, this sum is zero, so the angle is 90∘.
The general second-degree equation ax2+2hxy+by2+2gx+2fy+c=0 represents a pair of straight lines if a specific condition (the determinant of the associated matrix being zero) is met. The problem statement confirms that the given equation represents a pair of straight lines, so we don't need to verify this condition.
The angle between these two lines is determined solely by the coefficients of the homogeneous part of the equation, which is ax2+2hxy+by2=0. The linear terms (2gx+2fy) and the constant term (c) only affect the position of the intersection point of the lines, not the angle between them.
The angle θ between the pair of straight lines represented by ax2+2hxy+by2=0 is given by:
tanθ=a+b2h2−ab
A crucial special case arises when a+b=0. If a+b=0, it implies a=−b. In this situation, the formula for tanθ becomes undefined, which indicates that the angle θ is 90∘. This means the lines are perpendicular. We can see this intuitively: if a=−b, the homogeneous part becomes −bx2+2hxy+by2=0, or by2+2hxy−bx2=0. If we divide by bx2 (assuming x=0), we get (y/x)2+(2h/b)(y/x)−1=0. If m1 and m2 are the slopes of the lines, then m1m2=−1, which is the condition for perpendicular lines.
Let's apply this understanding to the given problem.
-
Identify the coefficients:
The given equation is 3y2−8xy−3x2−29x+3y−18=0.
To compare it with the standard form ax2+2hxy+by2+2gx+2fy+c=0, we rearrange the terms:
−3x2−8xy+3y2−29x+3y−18=0
Comparing the coefficients:
- Coefficient of x2, a=−3
- Coefficient of xy, 2h=−8⟹h=−4
- Coefficient of y2, b=3
- Coefficient of x, 2g=−29⟹g=−29/2
- Coefficient of y, 2f=3⟹f=3/2
- Constant term, c=−18
-
Check the sum of coefficients a+b:
We need to calculate a+b:
a+b=(−3)+(3)=0
-
Determine the angle:
Since a+b=0, the lines represented by the equation are perpendicular to each other.
Therefore, the angle between them is 90∘. …
-
- TG EAPCET 2022Set eng-2022-07-19-AN1 markMCQQ.If the angle between the planes r⋅(1i^−2j^+αk^)=7 and r⋅(2i^+4j^−2k^)=5 is 2π, then α= (A) 2 (B) 3 (C) 5 (D) 7
›Reveal solutionSolution
When two planes are perpendicular, their normal vectors are also perpendicular, meaning their dot product is zero. By setting the dot product of the given planes' normal vectors to zero, we find that α=−3.
The angle between two planes is defined as the angle between their normal vectors. A normal vector to a plane is a vector that is perpendicular to the plane.
The general vector equation of a plane is given by r⋅n=d, where n is the normal vector to the plane and d is a constant.
If two planes are perpendicular to each other, it means the angle between them is 90∘ or 2π radians. Consequently, their respective normal vectors must also be perpendicular to each other.
Two vectors A and B are perpendicular if and only if their dot product is zero: A⋅B=0.
We will use this property to find the value of α.
-
Identify the normal vectors of the given planes.
The first plane is given by the equation r⋅(1i^−2j^+αk^)=7.
From this, the normal vector to the first plane is n1=i^−2j^+αk^.
The second plane is given by the equation r⋅(2i^+4j^−2k^)=5.
From this, the normal vector to the second plane is n2=2i^+4j^−2k^.
-
Apply the condition for perpendicular planes.
We are given that the angle between the two planes is 2π. This means the planes are perpendicular.
As established, if the planes are perpendicular, their normal vectors n1 and n2 must also be perpendicular.
Therefore, their dot product must be zero: n1⋅n2=0.
-
Calculate the dot product and solve for α.
Substitute the expressions for n1 and n2 into the dot product equation: …
-
- TG EAPCET 2025Set eng-2025-05-03-FN1 markMCQQ.A line makes angles 60∘, 45∘, θ with positive X, Y, Z-axes respectively. If θ is an acute angle, then tanθ= (A) 31 (B) 2 (C) 1 (D) 3
›Reveal solutionSolution
The direction cosines of a line satisfy cos2α+cos2β+cos2γ=1. Using the given angles, we find cosθ=21, so θ=60∘ and tanθ=3. The correct option is (D).
The key idea is that for any line in 3D space, the cosines of the angles it makes with the coordinate axes are called direction cosines, and they always satisfy the fundamental identity cos2α+cos2β+cos2γ=1. This is because the direction vector’s components are proportional to these cosines, and the squared length of that vector is the sum of the squares of its components.
Here we are given two angles directly and told the third angle θ is acute. We can use the identity to solve for cosθ, then find tanθ.
- Write the direction cosines. If a line makes angles α, β, γ with the positive X, Y, Z axes, then its direction cosines are cosα, cosβ, cosγ. Here α=60∘, β=45∘, γ=θ (acute). So:
cos60∘=21,cos45∘=22,cosθ unknown.
- Apply the fundamental identity. For any line:
cos2α+cos2β+cos2γ=1.
Substitute the known values:
(21)2+(22)2+cos2θ=1.
- Simplify.
41+42+cos2θ=1⇒43+cos2θ=1.
So:
cos2θ=1−43=41.
- Determine cosθ. …
- TG EAPCET 2026Set eng-2026-05-10-AN1 markMCQQ.If θ is the angle between the circles x2+y2+2x−4y−4=0 and x2+y2−4x−6y−3=0 then cosθ= (A) 21 (B) −85 (C) −83 (D) 23
›Reveal solutionSolution
With r1=3, r2=4 and d2=10, the angle between the circles satisfies cosθ=2r1r2d2−r12−r22=−85. Correct option: (B).
Centres and radii.
C1:x2+y2+2x−4y−4=0⇒g1=1,f1=−2,c1=−4.
Centre (−1,2),r1=1+4+4=3.
C2:x2+y2−4x−6y−3=0⇒g2=−2,f2=−3,c2=−3.
Centre (2,3),r2=4+9+3=4.
Distance between centres.
d2=(2−(−1))2+(3−2)2=9+1=10.
Angle between the circles. …
- TG EAPCET 2025Set eng-2025-05-03-AN1 markMCQQ.A line makes angles 60∘, 45∘, θ with positive X, Y, Z-axes respectively. If θ is an acute angle, then tanθ= (A) 3 (B) 31 (C) 1 (D) 2
›Reveal solutionSolution
The direction cosines of a line satisfy cos2α+cos2β+cos2γ=1. Given α=60∘, β=45∘, and γ=θ acute, we find cosθ=21, so tanθ=3. The correct option is (A).
The key idea is that any line in 3D space has direction cosines — the cosines of the angles it makes with the positive coordinate axes. These three cosines are not independent; they satisfy a fundamental Pythagorean-like identity. Once we know two angles, we can solve for the third, and then compute its tangent.
- Recall the direction cosine identity If a line makes angles α, β, γ with the positive X, Y, Z axes, then
cos2α+cos2β+cos2γ=1.
This holds because the direction vector’s components are proportional to these cosines, and its squared length is the sum of squares of those components.
- Plug in the given angles We have α=60∘, β=45∘, γ=θ (acute).
cos60∘=21,cos45∘=22.
So
(21)2+(22)2+cos2θ=1.
- Simplify to find cosθ
41+42+cos2θ=1⇒43+cos2θ=1.
Hence
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.