Q.Represent the cell in which the following reaction takes place:
Mg(s)+2Ag+(0.0001 M)→Mg2+(0.130 M)+2Ag(s)
Calculate its Ecell if Ecell∘=3.17 V.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Cell Representation Nernst Equation
Cell Representation and the Nernst Equation: From Intuition to Precision
Imagine you have a Daniell cell — a zinc rod in zinc sulphate solution connected by a salt bridge to a copper rod in copper sulphate solution. You know it produces a voltage. But what happens if you dilute the copper sulphate solution? Or if you change the temperature? The voltage changes. The Nernst equation is the tool that tells you exactly how much it changes.
The Intuition First
A battery works because the two half-cells "want" to react — zinc wants to lose electrons, copper ions want to gain them. This "want" is measured as a tendency, or potential. But the strength of that tendency depends on how crowded the ions are.
Think of it like this: If you have a room full of people who all want to leave (like zinc ions wanting to form), the push to get out is stronger when the room is packed. If the room is nearly empty, the push is weaker. Similarly, for copper ions wanting to enter the metal (gain electrons), the pull is stronger when there are many copper ions around, and weaker when there are few.
The Nernst equation quantifies this: the actual cell potential depends on the concentrations (or activities) of the ions involved.
The Precise Statement
For a general cell reaction:
aA+bB→cC+dD
The cell potential E under non-standard conditions is given by:
E=E∘−nFRTlnQ
Where:
- E = cell potential under the given conditions (in volts)
- E∘ = standard cell potential (when all reactants/products are at 1 M, 1 atm, 25°C)
- R = universal gas constant (8.314 J/mol·K)
- T = temperature in Kelvin
- n = number of moles of electrons transferred in the balanced half-reactions
- F = Faraday constant (96,485 C/mol)
- Q = reaction quotient = [A]a[B]b[C]c[D]d (using concentrations for dilute solutions)
At 25°C (298 K), the equation simplifies to a very practical form:
E=E∘−n0.0591log10Q
The 0.0591 comes from F2.303RT at 298 K. Notice it uses log10 (common log), not natural log.
Cell Representation: How We Write It
In electrochemistry, we represent a cell with a shorthand notation. For the Daniell cell:
Zn(s)∣Zn2+(aq)∥Cu2+(aq)∣Cu(s)
The single vertical line ∣ represents a phase boundary (solid electrode | solution). The double line ∥ represents the salt bridge.
The anode (oxidation) is written on the left, the cathode (reduction) on the right. Electrons flow from left to right in the external circuit.
Applying the Nernst Equation to a Cell Representation
For the Daniell cell, the half-reactions are:
- Anode (oxidation): Zn(s)→Zn2+(aq)+2e−
- Cathode (reduction): Cu2+(aq)+2e−→Cu(s)
Overall: Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)
Here n=2 (two electrons transferred). The reaction quotient is:
Q=[Cu2+][Zn2+]
So the Nernst equation becomes:
E=E∘−20.0591log10[Cu2+][Zn2+]
Solids (Zn, Cu) do not appear in Q because their concentrations are constant (activity = 1).
A Worked Example
Suppose you have a Daniell cell where [Zn2+]=0.1 M and [Cu2+]=1.0 M at 25°C. E∘ for the cell is 1.10 V.
E=1.10−20.0591log101.00.1 …
Why this formula?
Cell Representation & the Nernst Equation: Why It Works
The Core Question
Why does a cell's voltage change when concentrations change? The Nernst equation answers this — but the reason lies in the link between chemical free energy and electrical work.
1. The Fundamental Link: Gibbs Free Energy & Cell Potential
A galvanic cell does electrical work. The maximum useful work a cell can do equals the change in Gibbs free energy (ΔG):
ΔG=−nFEcell
Where:
- n = moles of electrons transferred
- F = Faraday constant (96,485C mol−1)
- Ecell = cell potential (volts)
Why negative? A spontaneous reaction has ΔG<0 and Ecell>0 — the negative sign makes this consistent.
2. The Chemical Side: ΔG Depends on Concentration
For a general redox reaction:
aA+bB→cC+dD
The Gibbs free energy under non-standard conditions is:
ΔG=ΔG∘+RTlnQ
Where Q is the reaction quotient:
Q=[A]a[B]b[C]c[D]d
Why this form? It comes from the relationship between chemical potential and concentration — the entropy of mixing drives concentration dependence.
3. Combining Both Sides: The Derivation
Set the electrical work equal to the chemical free energy change:
−nFEcell=−nFEcell∘+RTlnQ
Divide both sides by −nF:
Ecell=Ecell∘−nFRTlnQ
This is the Nernst equation.
4. The "Why" in Plain Terms
| Concept | Physical Meaning |
|---|---|
| Ecell∘ | Voltage when all species are at 1 M (standard state) |
| −nFRTlnQ | Correction factor — adjusts voltage for real concentrations |
| Q | Tells you how far the reaction is from equilibrium |
Key insight: When Q=K (equilibrium), Ecell=0 — the battery is dead because no net reaction occurs.
5. The Common Form (log base 10)
At 25∘C (298K):
FRTln10≈0.0592V
So:
Ecell=Ecell∘−n0.0592log10Q
Why convert to log? Exam convenience — most concentration values are powers of 10.
--- …
The key idea is the Nernst equation, which relates cell potential to concentration for a spontaneous redox reaction.
Step 1 – Write the cell representation
Anode (oxidation): Mg(s) | Mg²⁺(aq)
Cathode (reduction): Ag⁺(aq) | Ag(s)
The cell is:
Mg(s) ∣ Mg2+(0.130 M) ∣∣ Ag+(0.0001 M) ∣ Ag(s)
Step 2 – Determine n and the reaction quotient Q
Two electrons are transferred: n=2.
Q=[Ag+]2[Mg2+]=(0.0001)20.130=1×10−80.130=1.3×107
Step 3 – Apply the Nernst equation
Ecell=Ecell∘−n0.0591logQ …
Cell: Mg(s)∣Mg2+(0.130 M)∣∣Ag+(0.0001 M)∣Ag(s). Applying the Nernst equation with n=2 and Q=[Ag+]2[Mg2+] gives Ecell=2.96 V.
Cell representation
Oxidation (anode) is written on the left, reduction (cathode) on the right:
Mg(s) ∣ Mg2+(0.130 M) ∣∣ Ag+(0.0001 M) ∣ Ag(s)
Here Mg is oxidised to Mg2+ and Ag+ is reduced to Ag; two electrons are transferred, so n=2.
Nernst equation
Ecell=Ecell∘−n0.0591logQ,Q=[Ag+]2[Mg2+]
Step 1 — Reaction quotient. …
Method: Nernst Equation for Electrochemical Cell Representation and EMF Calculation
Step 1: Identify the Cell Representation (Cell Notation)
The reaction is:
Mg(s)+2Ag+(0.0001 M)→Mg2+(0.130 M)+2Ag(s)
Rules for cell notation:
- Anode (oxidation) is written on the left
- Cathode (reduction) is written on the right
- Single vertical line
|represents phase boundary - Double vertical line
||represents salt bridge
Oxidation half-reaction (Anode):
Mg(s)→Mg2+(aq)+2e−
Reduction half-reaction (Cathode):
2Ag+(aq)+2e−→2Ag(s)
Cell representation:
Mg(s) ∣ Mg2+(0.130 M) ∣∣ Ag+(0.0001 M) ∣ Ag(s)
Step 2: Write the Nernst Equation
For the general cell reaction:
aA+bB→cC+dD
The Nernst equation at 298 K is:
Ecell=Ecell∘−n0.0591log[A]a[B]b[C]c[D]d
Where:
- n = number of electrons transferred
- Ecell∘ = standard cell potential
Step 3: Identify Values
- n=2 (2 electrons are transferred)
- Ecell∘=3.17 V
- Reaction quotient Q:
Q=[Ag+]2[Mg2+]=(0.0001)20.130
Step 4: Calculate Q
Q=1×10−80.130=1.3×107
Step 5: Apply Nernst Equation …
🧠 The Core Concept First
A cell representation is a shorthand notation of an electrochemical cell. The convention is:
- Anode (oxidation) on the left
- Cathode (reduction) on the right
- Single vertical line
|for phase boundary - Double vertical line
||for salt bridge - Concentrations written in parentheses
The Nernst equation for the cell reaction at 298 K is:
Ecell=Ecell∘−n0.0591logQ
where Q is the reaction quotient and n is the number of electrons transferred.
✗ Common Mistake #1: Wrong order of electrodes in cell representation
What students do:
Write Ag∣Ag+∣∣Mg2+∣Mg (reversing anode and cathode).
Why it’s wrong:
Oxidation happens at the anode. Here, Mg is oxidised to Mg²⁺, so Mg is the anode (left side). Ag⁺ is reduced to Ag, so Ag is the cathode (right side).
✓ How to avoid:
Always identify which species is oxidised (loses electrons) and which is reduced (gains electrons). Then write:
Anode (oxidation) ∣∣ Cathode (reduction)
Correct representation:
Mg(s) ∣ Mg2+(0.130 M) ∣∣ Ag+(0.0001 M) ∣ Ag(s)
✗ Common Mistake #2: Using wrong value of n in Nernst equation
What students do:
Take n=1 or n=3 (guessing from coefficients).
Why it’s wrong:
n is the number of electrons transferred in the balanced redox reaction. Here:
- Mg → Mg²⁺ loses 2 electrons
- 2Ag⁺ + 2e⁻ → 2Ag gains 2 electrons
So n=2.
✓ How to avoid:
Write the half-reactions and balance electrons. Count electrons lost = electrons gained.
✗ Common Mistake #3: Writing Q incorrectly
What students do:
Write Q=[Ag+][Mg2+] or Q=[Ag+]2[Mg2+] but forget to raise to stoichiometric coefficients.
Why it’s wrong:
For the reaction:
Mg(s)+2Ag+(aq)→Mg2+(aq)+2Ag(s)
Q=[Ag+]2[Mg2+] (solids are omitted).
✓ How to avoid:
Write the reaction quotient using products over reactants, each raised to its stoichiometric coefficient. Ignore solids and pure liquids.
✗ Common Mistake #4: Forgetting the minus sign or log in Nernst equation
What students do:
Use Ecell=Ecell∘+n0.0591logQ or forget the log entirely.
Why it’s wrong:
The correct form for a cell at 298 K is:
Ecell=Ecell∘−n0.0591logQ
✓ How to avoid:
Memorise the formula with the minus sign. Remember: as the reaction proceeds, Ecell decreases from Ecell∘.
✓ Step-by-Step Solution (for reference) …
- TG EAPCET 2026Set eng-2026-05-09-AN1 markMCQQ.The following reaction takes place in a galvanic cell 2Cr(s)+3Cd2+(aq)→2Cr3+(aq)+3Cd(s) What is ΔrGΘ of this cell (in kJ mol−1)? (F=96500 C mol−1; ECd2+∣Cd∘=−0.4 V, ECr3+∣Cr∘=−0.74 V) (A) −196.86 (B) −1968.6 (C) −32.81 (D) −19.686
›Reveal solutionSolution
The standard Gibbs free energy change is found from the cell potential via ΔrGΘ=−nFEcellΘ.
With EcellΘ=+0.34 V and n=6, we get ΔrGΘ=−196.86 kJ mol−1, so the correct option is (A).
The key idea is that a galvanic cell converts chemical energy into electrical work. The standard Gibbs free energy change ΔrGΘ is directly related to the maximum electrical work the cell can do, which is given by the product of the charge transferred and the cell potential.
We are given the overall reaction:
2Cr(s)+3Cd2+(aq)→2Cr3+(aq)+3Cd(s)
To find ΔrGΘ, we need the standard cell potential EcellΘ and the number of electrons transferred n.
-
Identify the half-reactions and their standard potentials
- Reduction of cadmium: Cd2++2e−→Cd(s), E∘=−0.40 V
- Reduction of chromium: Cr3++3e−→Cr(s), E∘=−0.74 V
In the overall reaction, Cr is oxidized (it loses electrons) and Cd2+ is reduced. So the cell potential is:
EcellΘ=EcathodeΘ−EanodeΘ
The cathode is where reduction occurs: Cd2+∣Cd with E∘=−0.40 V
The anode is where oxidation occurs: Cr∣Cr3+ with E∘=−0.74 V (but we use the reduction potential as given, then subtract).
Thus:
EcellΘ=(−0.40)−(−0.74)=+0.34 V
-
Determine the number of electrons transferred (n)
From the half-reactions:
- Cd2++2e−→Cd (each Cd²⁺ takes 2 electrons)
- Cr→Cr3++3e− (each Cr loses 3 electrons)
To balance the overall reaction, we need the least common multiple of 2 and 3, which is 6.
Multiply the cadmium half-reaction by 3: 3Cd2++6e−→3Cd
Multiply the chromium half-reaction by 2: 2Cr→2Cr3++6e−
So n=6 moles of electrons transferred per mole of reaction as written.
-
Apply the relationship between ΔrGΘ and EcellΘ …
-
- TG EAPCET 2026Set eng-2026-05-09-FN1 markMCQQ.A student builds a galvanic cell utilizing the given reaction Ni(s) + 2Ag+(aq) → Ni2+(aq) + 2Ag(s); E∘ = 1.05 V At 25 ∘C, what could the student do for the cell to generate a potential greater than that of the initial standard cell? (A) Increase the concentration of Ag+(aq) (B) Increase the size of the Ni (s) electrode (C) Decrease the size of the Ag(s) electrode (D) Increase the pressure
›Reveal solutionSolution
The cell potential depends on the reaction quotient Q via the Nernst equation; increasing [Ag+] makes Q smaller, which raises E above E∘. The correct choice is (A).
The key concept here is the Nernst equation, which tells us how the cell potential changes when concentrations deviate from standard conditions (1 M for solutes, 1 atm for gases, pure solids ignored). For the reaction
Ni(s)+2Ag+(aq)→Ni2+(aq)+2Ag(s)
the standard potential is E∘=1.05 V. The student wants E>E∘. Since E∘ is fixed, we must adjust the reaction quotient Q to make E larger.
- Write the Nernst equation for this cell At 25°C, the Nernst equation is
E=E∘−n0.0592logQ
where n is the number of electrons transferred. Here, Ni loses 2 electrons and each Ag⁺ gains 1, so n=2.
The reaction quotient is
Q=[Ag+]2[Ni2+]
(Solids like Ni and Ag do not appear in Q.)
- How to make E>E∘? Since E=E∘−20.0592logQ, we need E>E∘, which means
−20.0592logQ>0⇒logQ<0⇒Q<1
So the cell potential exceeds the standard value when the reaction quotient is less than 1.
- What does Q<1 mean in terms of concentrations?
Q=[Ag+]2[Ni2+]<1⇒[Ni2+]<[Ag+]2
Under standard conditions, both concentrations are 1 M, so Q=1 and E=E∘. To make Q<1, we can either decrease [Ni2+] or increase [Ag+].
- Evaluate the options
- (A) Increase the concentration of Ag⁺(aq) → This makes the denominator larger, so Q becomes smaller → E increases. ✓ …
- TG EAPCET 2026Set eng-2026-05-11-AN1 markMCQQ.The following reaction takes place in a galvanic cell at 298 K FeX2+(aq)+AgX+(aq)FeX3+(aq)+Ag(s) The ΔrGΘ (in kJ mol−1) and log Kc values are respectively (F=96500 Cmol−1, EAgX+/AgΘ=0.8 V, EFeX3+/FeX2+Θ=0.77 V, R=8.3 J mol−1K−1) (A) −0.508 ; 2.895 (B) 2.895 ; 5.08 (C) −2.895 ; 0.508 (D) 2.895 ; 0.508
›Reveal solutionSolution
The standard cell potential is EcellΘ=0.03 V, giving ΔrGΘ=−nFEcellΘ=−2.895 kJ mol−1 and logKc=0.059nEcellΘ≈0.508, so the correct pair is option (C).
Concept and intuition:
In a galvanic cell, the spontaneous reaction drives electrons from the anode (oxidation) to the cathode (reduction). The standard cell potential EcellΘ is the difference between the reduction potentials of the two half-cells. From EcellΘ we directly get the Gibbs free energy change via ΔrGΘ=−nFEcellΘ, and the equilibrium constant via the Nernst equation at standard conditions: logKc=0.059nEcellΘ at 298 K. The sign of ΔrGΘ must be negative for a spontaneous reaction, which immediately eliminates options with positive ΔrGΘ.
Step-by-step reasoning:
-
Identify the half-reactions and their standard potentials.
- Reduction: AgX++eX−Ag(s), EΘ=+0.80 V (cathode).
- Oxidation: FeX2+FeX3++eX−, but we have the reduction potential for FeX3+/FeX2+=+0.77 V. For oxidation, we reverse the sign: EoxΘ=−0.77 V. The cell potential is EcellΘ=EcathodeΘ−EanodeΘ=0.80−0.77=0.03 V.
-
Determine the number of electrons transferred (n).
The balanced reaction FeX2++AgX+FeX3++Ag involves one electron transfer: FeX2+FeX3++eX− and AgX++eX−Ag. So n=1.
-
Calculate ΔrGΘ.
ΔrGΘ=−nFEcellΘ=−1×96500 C mol−1×0.03 V.
Since 1 C⋅V=1 J, we get ΔrGΘ=−2895 J mol−1=−2.895 kJ mol−1.
-
Calculate logKc.
At 298 K, the Nernst equation simplifies to EcellΘ=n0.059logKc (using R=8.3, F=96500, and ln→log10 factor 2.303). …
-
- TG EAPCET 2026Set ap-2026-05-04-AN1 markMCQQ.What is the SRP for the following reaction? M3+(aq) + 3e− → M(s) Given: 2M(s) + 3Zn2+(aq) → 2M3+(aq) + 3Zn(s), E∘ = 0.90 V Zn2+(aq) + 2e− → Zn(s), E∘ = -0.76 V (A) +1.66 V (B) -1.66 V (C) -0.14 V (D) +0.14 V
›Reveal solutionSolution
In the given spontaneous cell Zn2+/Zn is the cathode, so Ecell∘=Ecathode∘−Eanode∘ gives EM3+/M∘=−0.76−0.90=−1.66 V.
The spontaneous reaction
2M(s)+3Zn2+(aq)→2M3+(aq)+3Zn(s),Ecell∘=+0.90 V
has Zn2+ reduced (cathode) and M oxidised (anode). Therefore
Ecell∘=Ecathode∘−Eanode∘=EZn2+/Zn∘−EM3+/M∘ …
- TG EAPCET 2023Set ap-2023-05-10-FN1 markMCQQ.Given: \ce{Cu^{2+}(aq) + e^- -> Cu^+(aq)};\ E^\circ_{\ce{Cu^{2+}/Cu^+}} = +0.153\,\text{V}} \ce{Cu^+(aq) + e^- -> Cu(s)};\ E^\circ_{\ce{Cu^+/Cu}} = +0.520\,\text{V}} What is the value of ECuX2+/Cu∘? (A) 0.520V (B) 0.153V (C) 0.673V (D) 0.336V
›Reveal solutionSolution
The standard potential for the two-electron reduction CuX2+Cu is not the sum of the given potentials — it is the weighted average of the Gibbs free energy changes. The correct value is 0.336 V, option (D).
The trap here is tempting: just add 0.153 V and 0.520 V to get 0.673 V. That would be the answer if potentials were additive — but they are not. Electrode potentials are intensive properties; they depend on the number of electrons transferred. What is additive is the Gibbs free energy change, ΔG∘=−nFE∘.
So to find E∘ for CuX2++2eX−Cu, we must work through the free energies.
-
Write the half-reactions with their n and ΔG∘.
For CuX2++eX−CuX+:
n1=1, E1∘=+0.153 V
ΔG1∘=−n1FE1∘=−F(0.153)
For CuX++eX−Cu:
n2=1, E2∘=+0.520 V
ΔG2∘=−F(0.520)
-
Add the two steps to get the overall reaction.
CuX2++eX−CuX+
CuX++eX−Cu
Sum: CuX2++2eX−Cu
The overall ΔG∘ is the sum:
ΔGtotal∘=ΔG1∘+ΔG2∘=−F(0.153+0.520)=−F(0.673)
-
Relate total ΔG∘ to the overall E∘.
For the overall reaction, n=2. So:
ΔGtotal∘=−nFECuX2+/Cu∘=−2FECuX2+/Cu∘
Equate:
−2FECuX2+/Cu∘=−F(0.673)
Cancel −F (non-zero):
2ECuX2+/Cu∘=0.673 …
-
- TG EAPCET 2023Set ap-2023-05-10-AN1 markMCQQ.For the cell reaction Zn(s) + Ni2+(aq) → Zn2+(aq) + Ni(s), Ecell∘=0.51 V. Standard Gibbs energy change is (IF = 96500 C mol−1) (A) −24.60 kJ mol−1 (B) −19.29 kJ mol−1 (C) −49.20 kJ mol−1 (D) −98.43 kJ mol−1
›Reveal solutionSolution
The standard Gibbs energy change is directly related to the cell potential by ΔG∘=−nFEcell∘. For this reaction, n=2 electrons transferred, so ΔG∘=−2×96500×0.51=−98430 J mol−1=−98.43 kJ mol−1, matching option (D).
The key idea is that the standard Gibbs free energy change (ΔG∘) for a spontaneous electrochemical cell reaction is negative and proportional to the cell potential. The relationship is ΔG∘=−nFEcell∘, where n is the number of moles of electrons transferred in the balanced reaction, and F is Faraday’s constant (charge per mole of electrons). This formula comes from the fact that electrical work done by the cell equals the charge transferred times the potential difference, and at constant temperature and pressure, that work equals the decrease in Gibbs free energy.
-
Determine the number of electrons transferred (n).
The half-reactions are:
- Oxidation: Zn(s)→Zn2+(aq)+2e−
- Reduction: Ni2+(aq)+2e−→Ni(s) Each zinc atom loses two electrons, and each nickel ion gains two electrons. So n=2.
-
Apply the formula ΔG∘=−nFEcell∘.
Given:
Ecell∘=0.51 V
F=96500 C mol−1
Therefore:
ΔG∘=−2×96500×0.51
- Calculate step by step. First, 2×96500=193000. Then, 193000×0.51=98430. …
-
- TG EAPCET 2023Set eng-2023-05-14-FN1 markMCQQ.For the reaction at 25 ∘C, X2O4(l)⟶2XO2(g), ΔU and ΔS are 2.1 K.Cal and 20 Cal/K respectively. What is ΔG for the reaction at the same temperature? (R = 2 Cal K−1mol−1) (A) −2.67 k.Cal (B) +2.67 k.Cal (C) −1.67 k.Cal (D) +3.67 k.Cal
›Reveal solutionSolution
Converting ΔU to ΔH using the PΔV work of the expanding gas, then applying ΔG=ΔH−TΔS, gives ΔG≈−2.67 k.Cal, so the correct option is (A).
Concept. We're given ΔU and ΔS for a reaction where a liquid converts into gas. Since gas is produced, the reaction does PΔV work on the surroundings, so ΔH=ΔU. We first find ΔH, then apply ΔG=ΔH−TΔS.
-
Relation between ΔH and ΔU. At constant pressure, ΔH=ΔU+PΔV=ΔU+ΔngRT, where Δng is the change in moles of gas.
-
Find Δng. Reaction: X2O4(l)→2XO2(g). The reactant is a liquid (0 mol gas); the product is 2 mol gas. So Δng=2.
-
Compute PΔV. With R=2 CalK−1mol−1 and T=25∘C=298 K:
PΔV=ΔngRT=2×2×298=1192 Cal=1.192 k.Cal
- Compute ΔH.
ΔH=ΔU+PΔV=2.1+1.192=3.292 k.Cal
- Compute TΔS. Converting ΔS=20 Cal/K to k.Cal/K: ΔS=0.020 k.Cal/K. TΔS=298×0.020=5.96 k.Cal …
-
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.