Q.Find the
Concept understanding — Photon Energy
Photon Energy: The Energy Carried by Light
Light does not carry its energy in a continuous stream. It comes in discrete packets — like individual drops instead of a steady hose. Each packet is called a photon: the smallest possible unit of light of a given frequency. You cannot have half a photon; it is all or nothing.
The Intuition: Colour Determines Energy
Red light and blue light are both light, but they behave differently — blue light causes sunburn and drives chemical reactions more readily than red. The reason is that the colour (frequency) of light directly fixes how much energy each photon carries, and blue photons carry more energy than red photons.
The Planck–Einstein Relation
The energy E of a single photon is directly proportional to its frequency f, and inversely proportional to its wavelength λ:
E=hf=λhc
Where:
- E = energy of one photon (joules, J)
- f = frequency (hertz, Hz)
- λ = wavelength (metres, m)
- c = speed of light in vacuum (3.00×108 m/s)
- h = Planck's constant (6.626×10−34 J·s)
Planck's constant h is extremely tiny, so an individual photon carries a very small amount of energy — which is why we never feel single photons striking our skin.
What This Tells You
- Higher frequency = higher energy. Gamma rays have extremely energetic photons; radio waves have very low-energy photons.
- Shorter wavelength = higher energy. Ultraviolet photons are more energetic than visible-light photons; infrared photons are less.
- Energy is quantised. Light energy comes in fixed packets — you can have 1, 2, or 1000 photons, but never 0.5. This was Max Planck's revolutionary idea of 1900.
This is why UV light causes sunburn (UV photons carry enough energy to damage DNA, while visible photons do not), why X-ray photons are energetic enough to pass through soft tissue but get absorbed by bone, and why a photon needs enough energy to actually break a bond or drive a photochemical/biological reaction, rather than merely wavelength-dependent intensity.
A Concrete Example
Question: Which has more energy — a photon of red light (λ=700 nm) or a photon of blue light (λ=450 nm)?
Since E=λhc, energy is inversely proportional to wavelength, so the shorter-wavelength blue photon carries more energy:
- Red: Ered=700×10−9(6.626×10−34)(3.00×108)≈2.84×10−19 J
- Blue: Eblue=450×10−9(6.626×10−34)(3.00×108)≈4.42×10−19 J
The blue photon carries about 1.5 times the energy of the red photon.
A common mistake is to think brighter light means more energetic photons. Brightness is the number of photons per second, not the energy per photon. A bright red light has many low-energy photons; a dim blue light has fewer but higher-energy ones.
The Big Picture
Photon energy is the bridge between the wave nature of light (frequency, wavelength) and its particle nature (energy packets) — one of the foundational ideas of quantum mechanics: at the smallest scales, energy is not continuous but comes in discrete, indivisible units.
Photon energy, given by the Planck-Einstein relation E = hf, is one of the most fundamental formulas in the NCERT Class 12 Physics Dual Nature of Radiation and Matter chapter, and "photon energy formula and calculation" is a heavily searched query among students preparing for CBSE boards, JEE Main, and NEET. Because this idea links directly to the photoelectric effect and atomic spectra, it also anchors several "modern physics important questions" compiled for competitive-exam revision.
Why this formula?
Why Photon Energy is E=hf — The Reasoning Behind the Formula
The formula E=hf is not something you memorise and plug numbers into. It comes from a deep shift in how physicists understood light.
The problem that forced the formula
By the late 1800s, classical physics said light was a wave — continuous, carrying energy in proportion to its intensity (brightness). But blackbody radiation and the photoelectric effect showed something bizarre: when you shine light on a metal, electrons are ejected only if the light's frequency is above a certain threshold, no matter how bright the light is. Below that frequency, even the brightest lamp won't kick out a single electron. Classically this made no sense — a wave's energy depends on amplitude, not frequency.
Einstein's radical idea (1905)
Einstein proposed that light comes in discrete packets — photons — each carrying a fixed energy that depends only on its frequency, with Planck's constant h as the proportionality:
A single photon's energy is E=hf, where f is the frequency of the light.
This directly explains the photoelectric effect: an electron needs a minimum energy (the work function ϕ) to escape. If a photon's energy hf<ϕ, no electron is ejected — regardless of how many photons you send, because each photon interacts with one electron individually.
E=hf is not derived from deeper principles — it is a postulate justified by the experiments it explains, and it unified optics with quantum mechanics.
The equivalent forms
Since c=fλ for light in vacuum, the same idea in terms of wavelength is:
E=λhc
Use this when you're given λ instead of f. A photon also carries momentum (despite having no mass):
p=cE=λh
This follows from special relativity: E2=(pc)2+(mc2)2, and for a photon m=0, so E=pc, hence p=h/λ.
- h=6.626×10−34 J⋅s (Planck's constant)
- c=3.0×108 m/s (speed of light)
- For atomic-scale problems use electronvolts: 1 eV=1.602×10−19 J
A common exam trap
E=hf means higher frequency = more energy per photon — true. But a brighter light does not mean higher photon energy. Intensity is the number of photons per second per area; each photon still carries hf.
Do not confuse intensity (number of photons) with frequency (energy per photon). They are independent.
Final answer: E=hf
Concept: De Broglie Wavelength — but here it’s the inverse: X-rays are produced when fast electrons are suddenly stopped. The maximum photon energy equals the kinetic energy of the electron.
-
The kinetic energy of an electron accelerated through 30 kV is
K=eV=30 keV.
-
The maximum X-ray photon energy is the same:
Emax=hfmax=eV.
-
(a) Maximum frequency:
fmax=heV=6.63×10−341.6×10−19×30×103
=7.24×1018 Hz.
-
(b) Minimum wavelength:
λmin=fmaxc=7.24×10183×108
=4.14×10−11 m=0.0414 nm.
The maximum frequency is 7.24×1018 Hz and the minimum wavelength is 0.0414 nm.
The maximum frequency of X-rays comes from an electron converting all its kinetic energy into a single photon, giving fmax=7.24×1018 Hz. The minimum wavelength follows from c=fλ, giving λmin=0.0414 nm.
This is a classic problem that connects two beautiful ideas: the kinetic energy gained by an electron accelerated through a potential difference, and the quantum nature of light. When an electron slams into a metal target in an X-ray tube, it can lose energy in one dramatic step — emitting a single photon. The most energetic photon possible corresponds to the electron giving up all its kinetic energy at once. That sets the upper limit on frequency and the lower limit on wavelength.
The key relationship is the de Broglie–Einstein relation for photons: E=hf, where h is Planck’s constant. For the electron, the kinetic energy gained is K=eV, where e is the electron charge and V is the accelerating voltage. Setting K=hfmax gives us the maximum frequency. Then λmin=c/fmax gives the minimum wavelength.
Let’s work through it step by step.
- Find the kinetic energy of the electron. An electron accelerated through a potential difference V=30 kV=30×103 V gains kinetic energy
K=eV=(1.602×10−19 C)(30×103 V)=4.806×10−15 J.
This is the maximum energy available to produce a single X-ray photon.
- Set this equal to the photon energy for maximum frequency. The photon energy is E=hf. For the most energetic photon,
hfmax=eV.
So
fmax=heV.
Using h=6.626×10−34 J⋅s,
fmax=6.626×10−344.806×10−15=7.25×1018 Hz.
(Rounding to three significant figures gives 7.24×1018 Hz if we use h=6.63×10−34 — both are acceptable in exams.)
A common mistake is to forget that V is in kilovolts. Always convert to volts first: 30 kV=30000 V, not 30 V.
- Now find the minimum wavelength. For any electromagnetic wave, c=fλ. The minimum wavelength corresponds to the maximum frequency:
λmin=fmaxc.
Using c=3.00×108 m/s,
λmin=7.25×10183.00×108=4.14×10−11 m.
That’s 0.0414 nm (since 1 nm=10−9 m).
There’s a handy shortcut formula for the minimum wavelength in X-ray tubes:
λmin(in nm)=V(in kV)1.24.
Here, 1.24/30=0.0413 nm — nearly identical. This comes from combining eV=hc/λ and plugging in constants. Memorise it for speed in exams.
- Check the numbers with the shortcut. From eV=hc/λmin, we get
λmin=eVhc.
With hc=1240 eV⋅nm (a very useful constant),
λmin=30000 eV1240 eV⋅nm=0.0413 nm.
This confirms our calculation.
The maximum frequency is 7.24×1018 Hz and the minimum wavelength is 0.0414 nm.
Method: De Broglie–Duane–Hunt Relation (Inverse Photoelectric Effect)
This problem uses the fact that when an electron is stopped completely in a target, its entire kinetic energy converts into a single X-ray photon. That photon has the maximum possible frequency and the minimum possible wavelength for that accelerating voltage.
Step 1 – Write the energy conversion
The kinetic energy gained by an electron accelerated through a potential difference V is:
K=eV
where e=1.6×10−19 C and V=30 kV=30×103 V.
When this electron is brought to rest in one collision, the photon produced has energy:
Ephoton=hfmax=eV
Step 2 – Find maximum frequency
From the equation above:
fmax=heV
Use h=6.63×10−34 J⋅s.
fmax=6.63×10−34(1.6×10−19)(30×103)
fmax=6.63×10−344.8×10−15≈7.24×1018 Hz
fmax=heV
Step 3 – Find minimum wavelength
Use the wave relation c=fλ:
λmin=fmaxc=eVhc
where c=3×108 m/s.
A useful shortcut: hc≈1240 eV⋅nm (or 1.24×10−6 eV⋅m). Here:
λmin=30×103 eV1240 eV⋅nm≈0.0413 nm
In metres:
λmin=4.13×10−11 m
λmin=eVhc
Final Answer
- Maximum frequency: 7.24×1018 Hz
- Minimum wavelength: 4.13×10−11 m (or 0.0413 nm)
Tip
For quick calculation, remember hc=1240 eV⋅nm. Then λmin in nm is simply V (in volts)1240.
Watch outDo not confuse this with the de Broglie wavelength of the electron itself. The de Broglie wavelength of a 30 keV electron is about 7×10−12 m — noticeably smaller than the X-ray photon's minimum wavelength here. They are different physical quantities.
Common Mistakes on the De Broglie / X-Ray Wavelength Problem
This question is from the X-ray production chapter, not directly from the De Broglie wavelength topic — and that itself is the first trap. Students often mix up the two concepts. Let me walk through the mistakes one by one.
Mistake 1: Using the De Broglie wavelength formula instead of the Duane–Hunt relation
The most common error: a student sees "wavelength" and "electrons" and immediately writes
λ=ph=2meVh
This gives the De Broglie wavelength of the electron, not the X-ray wavelength. The question asks for the X-rays produced when electrons strike a target. The minimum wavelength of X-rays comes from the entire kinetic energy of the electron converting into a single photon:
λmin=eVhc
De Broglie wavelength is for a moving particle. X-ray wavelength is for a photon. They are different physical quantities — never use λ=h/p for photon wavelength in this context.
How to avoid: Read the question carefully. If it says "X-rays produced by electrons," you are in the X-ray production chapter. The relevant formula is eV=hfmax (or eV=hc/λmin). The De Broglie formula belongs to a different chapter.
Mistake 2: Forgetting to convert kV to V
The voltage is given as 30 kV. That is 30×103=3.0×104 V. Students sometimes plug in 30 directly, which gives an answer off by a factor of 1000.
How to avoid: Always write the conversion explicitly: V=30 kV=30×103 V=3.0×104 V. Do it on paper before substituting.
Mistake 3: Using the wrong value of Planck's constant or speed of light
Two common sub-mistakes here:
- Using h=6.63×10−34 J s but forgetting that eV is in joules. The energy eV must be in joules: E=(1.6×10−19)(3.0×104)=4.8×10−15 J.
- Using c=3×108 m/s but then getting the wavelength in metres — which is fine, but then you must convert to ångströms or picometres as the problem expects.
How to avoid: Keep a consistent unit system. Use SI units throughout, then convert at the end. A useful shortcut: for X-ray problems, use the formula in eV and ångströms:
λmin(in A˚)=V(in volts)12400
This comes from hc=12400 eV⋅A˚. For V=30 kV=30000 V:
λmin=3000012400=0.413 A˚
Memorise hc=12400 eV⋅A˚. It saves time and avoids unit errors in X-ray problems.
Mistake 4: Confusing maximum frequency with minimum wavelength
Students sometimes calculate the frequency correctly but then write λmin=c/fmax and get the right answer — but they mix up which is maximum and which is minimum. The relationship is:
fmax=heV,λmin=fmaxc=eVhc
Since f and λ are inversely related, the maximum frequency corresponds to the minimum wavelength. There is no "maximum wavelength" in this context — the continuous X-ray spectrum has a sharp cut-off at the short-wavelength end.
How to avoid: Write the two relations side by side:
- eV=hfmax → solve for fmax
- eV=λminhc → solve for λmin
Then check: does a larger V give a larger fmax? Yes. Does it give a smaller λmin? Yes. That consistency check catches errors.
Mistake 5: Not showing the final answer with correct units and significant figures
Examiners expect:
- Frequency in Hz (or s−1)
- Wavelength in metres or ångströms (often ångströms are preferred for X-rays)
For V=3.0×104 V:
fmax=heV=6.63×10−34(1.6×10−19)(3.0×104)=7.24×1018 Hz
λmin=eVhc=(1.6×10−19)(3.0×104)(6.63×10−34)(3×108)=4.14×10−11 m=0.414 A˚
How to avoid: After calculation, ask: "Does this wavelength make sense for X-rays?" X-ray wavelengths are of the order of 10−10 to 10−11 m (0.1–1 Å). If you get 10−8 m (UV range) or 10−12 m (gamma rays), you've made an error.
Summary of the correct approach
fmax=heV,λmin=eVhc
- Convert kV to V.
- Use eV in joules (or use the 12400 eV⋅A˚ shortcut).
- Do not use the De Broglie formula.
- Check that your final wavelength is in the X-ray range (~0.1–1 Å).
The correct answers:
- (a) fmax≈7.24×1018 Hz
- (b) λmin≈4.14×10−11 m (or 0.414 A˚)
- TG EAPCET 2026Set eng-2026-05-10-FN1 markMCQQ.When gaseous hydrogen at room temperature is bombarded with 12.75 eV electrons, the maximum possible number of spectral lines emitted is (A) 3 (B) 4 (C) 1 (D) 6
›Reveal solutionSolution
The key idea is that the 12.75 eV electron excites the hydrogen atom to a specific energy level, and the number of spectral lines equals the number of possible downward transitions from that level. The maximum number of spectral lines is 6.
When a hydrogen atom absorbs energy from a colliding electron, the electron in the atom jumps from its ground state (n=1) to a higher energy level. The energy levels of hydrogen are given by En=−n213.6 eV. The energy difference between the ground state (n=1) and any excited state (n) is ΔE=13.6(1−n21) eV. The bombarding electron provides exactly 12.75 eV of energy, so we need to find which n this corresponds to.
The number of spectral lines emitted when the atom de-excites depends on how many distinct downward jumps are possible. If the atom is excited to level n, the number of spectral lines is the number of ways to go from n down to 1, which is 2n(n−1).
Let’s work through the steps.
- Find the excited state reached. The ground state energy is E1=−13.6 eV. The energy of the nth level is En=−n213.6 eV. The energy absorbed to go from n=1 to n is:
ΔE=En−E1=−n213.6−(−13.6)=13.6(1−n21) eV.
Set this equal to 12.75 eV:
13.6(1−n21)=12.75.
Divide both sides by 13.6:
1−n21=13.612.75=0.9375.
So:
n21=1−0.9375=0.0625.
Hence n2=0.06251=16, so n=4.
The atom is excited to the n=4 level.
-
Determine the possible transitions.
From n=4, the electron can fall to any lower level: n=3, n=2, or n=1. From n=3, it can fall to n=2 or n=1. From n=2, it can fall to n=1. Each distinct jump emits a photon of a specific wavelength, producing a spectral line.
The total number of distinct spectral lines is the number of pairs of levels (ni,nf) with ni>nf, starting from n=4 down to n=1. This is simply the number of combinations of 4 levels taken 2 at a time:
(24)=24×3=6.
Alternatively, list them: 4→3, 4→2, 4→1, 3→2, 3→1, 2→1 — that’s 6 lines.
Watch outA common mistake is to think that the atom can only emit lines from the highest level directly to lower ones, counting only 3 lines (4→3, 4→2, 4→1). But the atom cascades down through intermediate levels, so all possible downward transitions count.
- Confirm the energy matches exactly. The energy difference E4−E1=13.6(1−1/16)=13.6×15/16=12.75 eV, which matches the bombarding energy exactly. So the atom is excited precisely to n=4, not ionized (ionization requires 13.6 eV). Thus, only transitions within the atom occur.
TipFor hydrogen, the number of spectral lines when excited to level n is always 2n(n−1). Here n=4 gives 24×3=6. This formula works because each pair of levels gives one line.
✓Final answerThe maximum possible number of spectral lines emitted is 6, which corresponds to option (D).
- TG EAPCET 2025Set eng-2025-05-02-AN1 markMCQQ.The ratio of the kinetic energies of the electrons in the third and fourth excited states of hydrogen atom is (A) 4:3 (B) 16:9 (C) 25:16 (D) 5:4
›Reveal solutionSolution
The kinetic energy of an electron in a hydrogen atom is proportional to 1/n2. The third excited state corresponds to n=4 and the fourth excited state to n=5, so the ratio of their kinetic energies is 1/521/42=25:16. The answer is (C).
Concept & Intuition
In the Bohr model of the hydrogen atom, an electron’s total energy is En=−n213.6 eV. But kinetic energy is positive and exactly equal to the magnitude of the total energy (since E=KE+PE, and PE=−2×KE for a Coulomb force). So KEn=n213.6 eV.
The key: kinetic energy scales as 1/n2. The “excited states” are counted starting from the ground state (n=1) as the first. So the third excited state means n=4, and the fourth excited state means n=5. The ratio is then simply (1/42):(1/52)=25:16.
Step-by-step reasoning
-
Identify the quantum numbers
- Ground state: n=1 (first energy level)
- First excited state: n=2
- Second excited state: n=3
- Third excited state: n=4
- Fourth excited state: n=5
Watch outA common mistake is to think “third excited” means n=3. Remember: “excited” counts above the ground state, so the k-th excited state has n=k+1.
-
Write the kinetic energy formula
For hydrogen, the kinetic energy in the n-th orbit is
KEn=n213.6 eV
(derived from KE=21mv2 and v∝1/n).
- Compute the ratio
KEfourth excitedKEthird excited=KEn=5KEn=4=13.6/5213.6/42=1/251/16=1625.
So the ratio is 25:16.
- Match with options Option (C) is 25:16.
TipYou never need the actual value 13.6 eV — the constant cancels. The ratio of kinetic energies for any two states n1 and n2 is always n22:n12.
✓Final answerThe correct option is (C) 25:16.
ANSWER: C
-
- TG EAPCET 2024Set ap-2024-05-07-FN1 markMCQQ.In Bohr model of hydrogen atom, if the difference between the radii of nth and (n+1)th orbits is equal to the radius of (n−1)th orbit, then the value of n is (A) 1 (B) 2 (C) 4 (D) 3
›Reveal solutionSolution
The problem uses the Bohr radius formula rn=n2a0 and sets rn+1−rn=rn−1. Solving the resulting quadratic gives n=4, so the correct option is (C).
The key idea is that in the Bohr model, the radius of the n-th orbit is proportional to n2. So the difference between successive radii grows as we go to higher orbits. The condition given — that this difference equals the radius of a lower orbit — sets up a simple quadratic in n.
Let’s work through it step by step.
- Write the radii in terms of n. In the Bohr model, the radius of the n-th orbit is
rn=n2a0,
where a0 is the Bohr radius (a constant). So we have:
rn=n2a0,rn+1=(n+1)2a0,rn−1=(n−1)2a0.
- Translate the given condition into an equation. The problem says:
rn+1−rn=rn−1.
Substituting the expressions:
(n+1)2a0−n2a0=(n−1)2a0.
Since a0=0, we can divide through by a0:
(n+1)2−n2=(n−1)2.
- Simplify the left-hand side.
(n+1)2−n2=(n2+2n+1)−n2=2n+1.
So the equation becomes:
2n+1=(n−1)2.
- Expand and solve the quadratic.
2n+1=n2−2n+1.
Cancel the +1 on both sides:
2n=n2−2n.
Bring all terms to one side:
0=n2−4n.
Factor:
n(n−4)=0.
So n=0 or n=4.
- Interpret the result physically. The principal quantum number n is a positive integer starting from 1. n=0 is not allowed. Hence the only valid solution is
n=4.
TipA common mistake is forgetting that rn−1 exists only for n≥2. Here n=4 satisfies that, so no issue. Also, note that the a0 cancels immediately — the condition is independent of the actual value of the Bohr radius.
Watch outSome students might try to use the formula rn=4π2me2n2h2 and get lost in constants. The proportionality rn∝n2 is all you need.
✓Final answerThe correct option is (C).
ANSWER: C
- TG EAPCET 2023Set eng-2023-05-12-AN1 markMCQQ.The ratio of the energies of the electron in the hydrogen atom in the first and second excited states is (A) 9:4 (B) 4:1 (C) 8:1 (D) 1:8
›Reveal solutionSolution
Hydrogen-atom energy depends only on the principal quantum number: En∝−1/n2. The first excited state is n=2 and the second excited state is n=3, so the energy ratio is ∣E2∣:∣E3∣=41:91=9:4, option (A).
In the Bohr model the electron's energy is quantised:
En=−n213.6 eV,n=1,2,3,…
The ground state is n=1; an "excited state" is any state above it. So the first excited state is n=2 and the second excited state is n=3 (a common error is to call n=1 the first excited state — that is the ground state).
- Energies (magnitudes).
∣E2∣=2213.6=413.6,∣E3∣=3213.6=913.6.
- Ratio.
∣E3∣∣E2∣=13.6/913.6/4=49.
So the ratio of the energies in the first and second excited states is 9:4.
TipThe constant 13.6 eV cancels, so you can use En∝1/n2 directly: the energy ratio of two states is the inverse ratio of the squares of their quantum numbers.
Watch outCount excited states from the ground state: ground =n=1, first excited =n=2, second excited =n=3.
✓Final answerThe correct option is (A).
ANSWER: A
- TG EAPCET 2023Set ap-2023-05-11-AN1 markMCQQ.A hydrogen atom is excited from ground state to second excited state when it absorbs a photon. The energy of the photon is (A) 3.4 eV (B) 10.2 eV (C) 12.09 eV (D) 12.75 eV
›Reveal solutionSolution
The key idea is that the energy of the absorbed photon equals the difference between the energy levels of the final and initial states. For hydrogen, the ground state is n=1 and the second excited state is n=3. Using the formula En=−13.6eV/n2, the photon energy is E3−E1=12.09eV, so the correct option is (C).
The concept here is the Bohr model of the hydrogen atom, where electrons occupy discrete energy levels given by En=−n213.6eV, with n=1,2,3,…. When an electron jumps from a lower to a higher energy level, it must absorb a photon whose energy exactly matches the difference between those levels. The trick is correctly identifying which n corresponds to the "second excited state"—a common pitfall is confusing "excited state" numbering with the principal quantum number.
Let’s work through it step by step:
-
Identify the initial and final states.
The ground state is n=1. The "second excited state" means the state with the second-highest energy above the ground state. The first excited state is n=2, the second excited state is n=3. So the electron goes from n=1 to n=3.
-
Write the energy formula for hydrogen.
En=−n213.6eV
This gives negative energies because the electron is bound; the more negative, the lower the energy.
- Calculate the energy of the ground state.
E1=−1213.6=−13.6eV
- Calculate the energy of the second excited state.
E3=−3213.6=−913.6≈−1.511eV
- Find the energy difference (photon energy). The photon must supply exactly the gap:
ΔE=E3−E1=(−1.511)−(−13.6)=12.089eV
Rounded to two decimal places, this is 12.09eV.
Watch outA common mistake is to think the "second excited state" is n=2 (which is actually the first excited state) or to confuse it with the ionization energy. Always count: ground = n=1, first excited = n=2, second excited = n=3, etc.
TipYou can also compute the difference directly using the formula ΔE=13.6(ni21−nf21) eV. Here ni=1, nf=3 gives ΔE=13.6(1−91)=13.6×98=12.09eV. This avoids calculating each energy separately.
- Match with the options. The options are: (A) 3.4 eV, (B) 10.2 eV, (C) 12.09 eV, (D) 12.75 eV. Our result is exactly 12.09 eV, which corresponds to option (C).
✓Final answerThe correct option is (C).
ANSWER: C
-
- TG EAPCET 2022Set eng-2022-07-20-FN1 markMCQQ.The energy of an electron in the fourth excited state of the hydrogen atom is (A) −0.85 eV (B) −1.70 eV (C) 0 (D) −0.425 eV
›Reveal solutionSolution
The fourth excited state of the hydrogen atom corresponds to the principal quantum number n=5. Using the Bohr model, the energy of an electron in this state is calculated as −0.544 eV.
The energy levels of an electron in a hydrogen atom are quantized, meaning the electron can only exist at specific discrete energy values. These energy levels are described by the principal quantum number, n, where n can be any positive integer (1,2,3,…).
The lowest possible energy state for an electron is called the ground state, which corresponds to n=1. Any state with n>1 is called an excited state. The excited states are numbered sequentially:
- The first excited state corresponds to n=2.
- The second excited state corresponds to n=3.
- The third excited state corresponds to n=4.
- And so on.
In general, the k-th excited state corresponds to the principal quantum number n=k+1.
The energy of an electron in the n-th orbit of a hydrogen atom is given by:
En=−n213.6 eV
where En is the energy in electron volts (eV). The negative sign indicates that the electron is bound to the nucleus.
Let's apply this understanding to the problem.
-
Identify the principal quantum number (n):
The question asks for the energy of an electron in the fourth excited state. Following our definition, the k-th excited state corresponds to n=k+1.
For the fourth excited state, k=4, so the principal quantum number is n=4+1=5.
Watch outA common mistake is to assume that the "fourth excited state" means n=4. Remember that n=1 is the ground state, so the first excited state is n=2, the second is n=3, and the third is n=4. Therefore, the fourth excited state must be n=5.
-
Calculate the energy (En):
Now, substitute n=5 into the energy formula for the hydrogen atom:
E5=−5213.6 eV
E5=−2513.6 eV
E5=−0.544 eV
-
Compare with the given options:
The calculated energy for the fourth excited state is −0.544 eV. Let's check the given options:
(A) −0.85 eV (This corresponds to n=4, which is the third excited state: E4=−13.6/42=−13.6/16=−0.85 eV)
(B) −1.70 eV
(C) 0
(D) −0.425 eV
Our calculated value of −0.544 eV is not among the provided options. This indicates a potential discrepancy in the question or options. However, based on the correct physical definition of excited states, the energy for the fourth excited state is indeed −0.544 eV.
✓Final answerThe energy of an electron in the fourth excited state of the hydrogen atom is −0.544 eV. This value is not present in the given options.
- TG EAPCET 2022Set eng-2022-07-18-FN1 markMCQQ.The light emitted in the transition n=3 to n=2 (where n is the principal quantum number of the state) in hydrogen is called Hα-light. Find the maximum work function that a metal can have so that Hα-light can emit photoelectrons from it. (A) 1.5 eV (B) 2.89 eV (C) 1.89 eV (D) 3.5 eV
›Reveal solutionSolution
The Hα transition (n=3 → n=2) in hydrogen emits a photon of energy 1.89 eV. For photoelectron emission, the metal’s work function must be less than or equal to this photon energy, so the maximum work function is 1.89 eV, corresponding to option (C).
The key concept here is the photoelectric effect: a photon can eject an electron from a metal only if its energy is at least as large as the metal’s work function (the minimum energy needed to remove an electron). The Hα photon’s energy is fixed by the hydrogen energy levels, so the maximum work function a metal can have and still emit photoelectrons is exactly that photon energy.
We find the photon energy from the hydrogen atom’s energy levels:
- Recall the hydrogen energy formula The energy of a level with principal quantum number n is
En=−n213.6 eV
This comes from the Bohr model; the negative sign means the electron is bound.
- Calculate the energies for n=3 and n=2
E3=−913.6=−1.511 eV
E2=−413.6=−3.4 eV
- Find the photon energy from the transition The photon energy equals the difference between the initial and final levels:
ΔE=E3−E2=(−1.511)−(−3.4)=1.889 eV
This is the Hα photon energy.
- Apply the photoelectric condition For photoelectrons to be emitted, the photon energy must be at least the work function ϕ:
hν≥ϕ
The maximum work function that still allows emission is when equality holds:
ϕmax=1.889 eV≈1.89 eV
Watch outA common mistake is to use the difference in principal quantum numbers (3−2=1) and think the energy is simply 13.6 eV divided by 1 — that’s wrong. You must compute the actual energies of each level and subtract.
TipThe Hα line is the first line of the Balmer series (visible red light). Its energy (≈1.89 eV) is a standard value worth remembering for photoelectric problems.
✓Final answerThe correct option is (C).
ANSWER: C
- TG EAPCET 2021Set ap-2021-08-10-AN1 markMCQQ.Wavelength λ is emitted when an atom moves from 2E energy level to E energy level. If the transition takes place from 35E energy level to E energy level, then the emitted wavelength will be (A) 32λ (B) 23λ (C) 3λ (D) 2λ
›Reveal solutionSolution
The key idea is that the energy difference between levels determines the emitted wavelength via E=hc/λ. For the first transition, 2E−E=E=hc/λ. For the second, 35E−E=32E=hc/λ′. Since 32E is two-thirds of the first energy difference, the new wavelength is 23λ. The correct option is (B).
The relevant concept here is the inverse proportionality between photon energy and wavelength: Ephoton=λhc. When an atom drops from a higher energy level to a lower one, the emitted photon’s energy equals the difference between the two levels. So if we know the energy difference for one transition, we can scale it to find the wavelength for another.
Let’s work through it step by step.
- First transition: from 2E to E. The energy difference is
ΔE1=2E−E=E.
This photon has wavelength λ, so
E=λhc.
- Second transition: from 35E to E. The energy difference is
ΔE2=35E−E=32E.
Let the new wavelength be λ′. Then
32E=λ′hc.
- Relate the two: From step 1, E=hc/λ. Substitute this into step 2:
32⋅λhc=λ′hc.
Cancel hc (nonzero) from both sides:
3λ2=λ′1.
Invert both sides:
λ′=23λ.
TipNotice that a smaller energy difference gives a longer wavelength. Since 32E is less than E, the new wavelength must be larger than λ, immediately ruling out options (A) and (C) which are smaller or equal. Only (B) and (D) are larger; the math picks (B).
Watch outA common mistake is to think wavelength is proportional to energy difference directly. Remember: E∝1/λ, so halving the energy doubles the wavelength. Here the energy is 32 of the original, so the wavelength is 23 of the original — the reciprocal relationship.
✓Final answerThe correct option is (B).
ANSWER: B
- TG EAPCET 2021Set ap-2021-08-10-FN1 markMCQQ.Wavelength λ is emitted when an atom moves from 2E energy level to E energy level. If the transition takes place from 35E energy level to E energy level, then the emitted wavelength will be (A) 32λ (B) 23λ (C) 3λ (D) 2λ
›Reveal solutionSolution
Photon energy is inversely proportional to wavelength; the smaller energy gap 32E gives λ′=23λ — option (B).
First transition: 2E→E releases a photon of energy
ΔE1=2E−E=E,λ=Ehc.
Second transition: 35E→E releases
ΔE2=35E−E=32E.
Since λ∝ΔE1:
λ′=ΔE2hc=32Ehc=23⋅Ehc=23λ.
✓Final answerλ′=23λ ⇒ option (B).
- TG EAPCET 2021Set eng-2021-08-04-FN1 markMCQQ.Hydrogen atom in the ground state absorbs ΔE amount of energy. If the orbital angular momentum of the electron is increased by 2πh (h = Plank constant), then the magnitude of ΔE is (A) 12.09 eV (B) 12.75 eV (C) 10.2 eV (D) 13.6 eV
›Reveal solutionSolution
The key idea is that increasing the orbital angular momentum by 2πh corresponds to a one-step quantum jump (Δl=1), so the electron goes from n=1 to n=2. The energy absorbed is the difference between the n=2 and n=1 levels, which is 10.2 eV.
The orbital angular momentum of an electron in a hydrogen atom is quantized. For a given principal quantum number n, the orbital angular momentum is l(l+1)2πh, where l can be 0,1,…,n−1. But the problem gives a simpler clue: the increase is exactly 2πh. That is the fundamental unit of angular momentum in quantum mechanics — the reduced Planck constant ℏ=2πh.
When the angular momentum increases by exactly one unit of ℏ, the azimuthal quantum number l must increase by 1. In the ground state (n=1), the only possible l is 0. So after absorbing energy, the electron jumps to a state where l=1. The smallest n that allows l=1 is n=2. Therefore, the transition is from n=1 to n=2.
Watch outA common mistake is to think the angular momentum of the ground state is 2πh (i.e., l=1). But for n=1, l=0, so the ground-state angular momentum is actually zero. The increase of 2πh takes it from 0 to ℏ, which corresponds to l=1, not l=0 to l=2.
Now, the energy of a hydrogen atom in the nth state is En=−n213.6 eV. For the ground state (n=1), E1=−13.6 eV. For n=2, E2=−413.6=−3.4 eV.
The energy absorbed ΔE is the difference:
ΔE=E2−E1=(−3.4)−(−13.6)=10.2 eV.
TipYou can also remember the Lyman series: the first line (Lyman-alpha) corresponds to n=2→n=1 and has energy 10.2 eV. Absorption is just the reverse process, so the same energy is required.
Thus, the correct choice is (C).
✓Final answerThe magnitude of ΔE is 10.2 eV, which corresponds to option (C).
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.