Q.Haloalkanes react with KCN to form alkyl cyanides as main product while AgCN forms isocyanides as the chief product. Explain.
Concept understanding — Ambident Nucleophile Reactivity
Ambident Nucleophile Reactivity
Most nucleophiles attack through a single, obvious atom — a single lone pair, a single reactive site. An ambident nucleophile is unusual: it has TWO different atoms that each carry enough electron density to act as the attacking site, so it can bond to an electrophile through either one, giving two structurally different products from the same reagent.
Why This Happens: Resonance Delocalisation
An ambident nucleophile's negative charge (or lone pair) is delocalised by resonance across more than one atom, so more than one atom is genuinely nucleophilic.
Cyanide ion, CN−: −C≡N:↔:C=N−. Both the carbon and the nitrogen carry real electron density and can attack an electrophile.
- Attack through carbon gives an alkyl cyanide (nitrile), R−C≡N.
- Attack through nitrogen gives an alkyl isocyanide (isonitrile), R−N≡C.
Nitrite ion, NO2−: the negative charge is shared between nitrogen and the oxygens.
- Attack through oxygen gives an alkyl nitrite, R−O−N=O.
- Attack through nitrogen gives a nitroalkane, R−NO2.
What Decides Which End Attacks: The Counter-Ion Matters
For cyanide specifically, the identity of the metal counter-ion changes which end of CN− ends up bonded to the electrophile — this is the classic KCN-vs-AgCN contrast:
- KCN is genuinely ionic: it dissociates fully to give a FREE CN− ion. The carbon end is intrinsically the more nucleophilic site (more polarisable, and it forms the stronger C–C bond with the alkyl carbon), so KCN reacts through carbon, giving the nitrile as the major product.
- AgCN is covalent, with silver bonded to the CARBON of the cyanide group (Ag−C≡N). With the carbon end already occupied by silver, it is the NITROGEN lone pair that is left free to attack the alkyl halide — so AgCN gives the isocyanide as the major product.
A common mistake is to assume silver coordinates to nitrogen (since nitrogen is "more electronegative" or "harder"). It is the opposite: silver bonds to carbon, and it is precisely THAT occupation of the carbon end that forces attack to happen through nitrogen instead.
Whenever a reagent is described as an "ambident nucleophile," first identify the two possible attack sites and draw the resonance structures that put charge on each — then ask what about THIS specific reagent (ionic vs covalent form, hard/soft character of the electrophile, solvent) decides which site actually reacts.
Ambident nucleophile reactivity, as seen with cyanide and nitrite ions, is discussed in the NCERT/CBSE Class 12 Chemistry chapter on Haloalkanes and Haloarenes, and ‘ambident nucleophile cyanide vs isocyanide’ is a commonly searched important-question topic for board exams and JEE Main organic chemistry. Predicting which atom attacks in each case is a reasoning-based question type that also appears in NEET organic chemistry sections.
Why this formula?
Ambident Nucleophile Reactivity: Why the Rules Hold
Ambident nucleophiles are nucleophiles that have two (or more) different atoms capable of donating a lone pair to form a bond with an electrophile. Classic examples include:
- Cyanide ion (CNX−): can attack via carbon or nitrogen
- Nitrite ion (NOX2X−): can attack via oxygen or nitrogen
- Enolate ions: can attack via carbon or oxygen
The key question: Why does one atom react preferentially over the other?
The Core Principle: Hard-Soft Acid-Base (HSAB) Theory
The reactivity of ambident nucleophiles is governed by HSAB theory, which states:
Hard acids prefer hard bases; soft acids prefer soft bases.
Why this holds — the reasoning:
- Hard species are small, highly charged, and non-polarizable. Their interactions are dominated by ionic (electrostatic) forces.
- Soft species are large, polarizable, and have diffuse electron clouds. Their interactions are dominated by covalent (orbital overlap) forces.
For an ambident nucleophile, the two attacking atoms differ in hardness/softness:
| Ambident Nucleophile | Harder Atom | Softer Atom |
|---|---|---|
| CNX− | N (hard) | C (soft) |
| NOX2X− | O (hard) | N (soft) |
| Enolate (CHX2=CH−OX−) | O (hard) | C (soft) |
The Key Formula(e) and Their Derivation
1. Charge Density Rule (for hard-hard interactions)
For a hard electrophile (e.g., HX+, CHX3X+, AlClX3):
The nucleophile attacks via the atom with higher charge density (more negative charge).
Why?
Hard-hard interactions are electrostatic. The force between charges is:
F=r2k⋅q1⋅q2
- q1, q2 = charges on the species
- r = distance between them
A hard electrophile has a localized positive charge. The nucleophile's atom with greater negative charge density (more concentrated charge) exerts a stronger electrostatic attraction. This atom is typically the more electronegative one (e.g., O in enolate, N in cyanide).
Example:
Enolate with CHX3I (hard electrophile) → O-alkylation (harder O attacks)
2. Polarizability Rule (for soft-soft interactions)
For a soft electrophile (e.g., CHX3CHX2I, HgX2+, BrX2):
The nucleophile attacks via the atom with higher polarizability (softer atom).
Why?
Soft-soft interactions are covalent and depend on orbital overlap. The softer atom has:
- Larger, more diffuse orbitals (e.g., 3p vs 2p)
- Lower electronegativity
- Greater polarizability — its electron cloud can distort easily to form a bond
The energy of orbital overlap is approximated by:
ΔE∝energy gap(overlap integral)2
A softer atom has a higher-energy HOMO (closer to the electrophile's LUMO), giving a smaller energy gap and stronger interaction.
Example:
Enolate with CHX3CHX2I (soft electrophile) → C-alkylation (softer C attacks)
The "Why" Behind the Pattern: A Unified Picture
| Electrophile Type | Preferred Attack | Reason |
|---|---|---|
| Hard (small, high charge) | Harder atom (more electronegative) | Electrostatic attraction dominates |
| Soft (large, polarizable) | Softer atom (less electronegative) | Covalent orbital overlap dominates |
The critical insight:
The ambident nucleophile does not have a fixed reactivity — it adapts to the electrophile. This is not a contradiction; it's a consequence of two different bonding mechanisms competing.
Exam-Relevant Summary
| Ambident Nucleophile | Hard Electrophile → Product | Soft Electrophile → Product |
|---|---|---|
| CNX− | R−NC (isocyanide) via N | R−CN (nitrile) via C |
| NOX2X− | R−ONO (nitrite) via O | R−NOX2 (nitro) via N |
| Enolate | R−O (O-alkylation) | R−C (C-alkylation) |
Key takeaway:
The formula is not arbitrary — it follows directly from HSAB theory and the nature of the bonding interaction (electrostatic vs. covalent). Always identify the electrophile's hardness/softness first, then predict the attacking atom.
The key idea is ambident nucleophile reactivity — both CN− and AgCN contain the cyanide group, which can attack through either the carbon or the nitrogen atom. The product formed depends on which atom bonds to the alkyl group.
Reasoning:
- The cyanide ion (CN−) is an ambident nucleophile: it has two nucleophilic sites — the carbon atom (stronger nucleophile) and the nitrogen atom (weaker nucleophile).
- With KCN, the reaction occurs via the free CN− ion in solution. The carbon end is more polarisable and forms a stronger C–C bond, so attack happens at carbon, giving alkyl cyanide (R–C≡N).
- With AgCN, the bond is largely covalent, with the silver atom bonded to the carbon end of the cyanide group (Ag–C≡N). Because the carbon end is already occupied by silver, it is no longer free to act as a nucleophile — this leaves the nitrogen lone pair exposed, so the alkyl group attacks through nitrogen, yielding isocyanide (R–N≡C).
KCN gives alkyl cyanides via carbon attack (CN- is essentially free and ionic), while AgCN gives isocyanides via nitrogen attack, because silver is bonded to the carbon end of the cyanide group, leaving nitrogen free to act as the nucleophile.
KCN is ionic, giving a free CN− that attacks through its more nucleophilic CARBON end, forming an alkyl cyanide. AgCN is covalent, with silver bonded to the CARBON of the cyanide group (Ag−C≡N) — that is exactly what leaves the nitrogen's lone pair exposed and free to act as the nucleophile instead, giving the isocyanide.
Why cyanide is ambident
The cyanide ion has lone-pair density on both its carbon and nitrogen ends, so it can attack an electrophile through either atom, giving different products: attack through carbon gives an alkyl cyanide (nitrile, R−C≡N); attack through nitrogen gives an alkyl isocyanide (isonitrile, R−N≡C).
KCN: free, ionic cyanide attacks through carbon
KCN dissociates completely into K+ and free CN− in solution. The carbon end of CN− is more nucleophilic (larger, more polarisable, and it forms a stronger C–C bond with the alkyl carbon than the alternative C–N bond would), so SN2 attack happens at carbon, giving the nitrile as the major product:
R−X+KCNaqueous ethanolR−C≡N+KX
AgCN: covalent, silver bonded to CARBON, leaving nitrogen free
AgCN is not a simple source of free CN− — it is covalent, and the silver sits on the carbon end of the cyanide group: Ag−C≡N. With silver already occupying the carbon, that end is no longer available to act as a nucleophile — it is the nitrogen lone pair that is left exposed, and nitrogen is what attacks the alkyl halide's carbon. The product is the isocyanide, with silver halide as the byproduct:
R−X+AgCNetherR−N≡C+AgX
A common mix-up is to think the metal in AgCN sits on nitrogen. It is the opposite: silver bonds to carbon, and it is precisely THAT occupation of the carbon end that forces the nitrogen end to be the one that attacks — not some separate "kinetic vs thermodynamic" argument.
Summary
| Reagent | Nature of CN | Silver/metal bonds to | Free end that attacks | Product |
|---|---|---|---|---|
| KCN | Free CN− ion | — (no metal coordination) | Carbon (intrinsically more nucleophilic) | R−CN (nitrile) |
| AgCN | Covalent | Carbon | Nitrogen (freed up since carbon is occupied) | R−NC (isocyanide) |
KCN provides free CN−, which attacks through its more nucleophilic carbon end to give alkyl cyanides (R−CN). AgCN is covalent with silver bonded to the carbon of the cyanide group, which leaves the nitrogen end free to attack instead, giving alkyl isocyanides (R−NC).
Ambident Nucleophile Reactivity: The Cyanide Case
Method: Hard-Soft Acid-Base (HSAB) Principle
This principle explains why the same nucleophile (CN⁻) attacks through different atoms depending on the counterion (K⁺ vs Ag⁺).
Step-by-Step Explanation
1. Identify the ambident nature of cyanide
- The cyanide ion (CN−) has two nucleophilic sites:
- Carbon atom (the "soft" end)
- Nitrogen atom (the "hard" end)
2. Recall the HSAB classification
| Species | Type | Character |
|---|---|---|
| K⁺ | Hard acid | Small, high charge density |
| Ag⁺ | Soft acid | Large, polarizable |
| Carbon in CN⁻ | Soft base | Polarizable |
| Nitrogen in CN⁻ | Hard base | Less polarizable |
3. Apply the HSAB rule: Hard likes hard, soft likes soft
-
With KCN (K⁺ is hard):
- K⁺ binds to the hard N-end of CN⁻
- This frees the soft C-end to attack the haloalkane
- Result: R–Br+KCN→R–C≡N (alkyl cyanide)
-
With AgCN (Ag⁺ is soft):
- Ag⁺ binds to the soft C-end of CN⁻
- This frees the hard N-end to attack the haloalkane
- Result: R–Br+AgCN→R–N≡C (alkyl isocyanide)
Key Exam Point
The counterion controls which atom of the ambident nucleophile attacks.
| Reagent | Attacking atom | Product |
|---|---|---|
| KCN | C (soft) | Alkyl cyanide (R–CN) |
| AgCN | N (hard) | Alkyl isocyanide (R–NC) |
Quick Mnemonic
- KCN → Cyanide (C attacks)
- AgCN → isocyanide (N attacks, "i" for isocyanide)
This is a classic HSAB demonstration — always use it in your answer for full marks.
This is a classic exam favorite that tests your understanding of ambident nucleophiles and the role of the counterion. Let's break it down.
Why This Happens (The Core Concept)
Both KCN and AgCN contain the cyanide ion (CN−), which is an ambident nucleophile — it can attack through either the carbon atom (to give a cyanide, R–CN) or the nitrogen atom (to give an isocyanide, R–NC).
The key difference lies in the counterion:
- K⁺ is a small, hard cation. It binds weakly to the cyanide ion, leaving the carbon end more available for attack → alkyl cyanide (R–CN).
- Ag⁺ is a large, soft cation. It forms a strong bond with the carbon end of CN⁻, blocking it. The attack then occurs through the nitrogen end → alkyl isocyanide (R–NC).
Common Mistakes Students Make
1. ✗ Thinking CN⁻ attacks the same way in both cases
- Mistake: Assuming the product is always R–CN.
- Why it’s wrong: The counterion changes the effective nucleophilic site.
- How to avoid: Always check the nature of the cation — small/hard (K⁺, Na⁺) → C-attack; large/soft (Ag⁺, Cu⁺) → N-attack.
2. ✗ Confusing ambident nucleophile with resonance
- Mistake: Saying “CN⁻ has resonance, so it attacks from both ends.”
- Why it’s wrong: Resonance explains why two sites exist, but not which site is used.
- How to avoid: Remember: resonance gives possibility; the counterion gives preference.
3. ✗ Ignoring the role of the counterion entirely
- Mistake: Writing “KCN gives R–CN because CN⁻ is a strong nucleophile.”
- Why it’s wrong: That doesn’t explain why AgCN gives a different product.
- How to avoid: Always mention Ag⁺ binds to C, forcing N-attack.
4. ✗ Using the wrong product names
- Mistake: Calling R–NC a “cyanide” or R–CN an “isocyanide.”
- Why it’s wrong: They are structural isomers with different properties.
- How to avoid: Memorise:
- Cyanide = R–C≡N (carbon attached to alkyl)
- Isocyanide = R–N≡C (nitrogen attached to alkyl)
5. ✗ Forgetting the reaction conditions
- Mistake: Assuming the same product in aqueous vs. non-aqueous medium.
- Why it’s wrong: Solvent can affect ion pairing, but the counterion effect dominates here.
- How to avoid: Stick to the standard explanation: K⁺ vs Ag⁺ is the deciding factor.
Quick Summary Table
| Reagent | Counterion | Attack site | Product |
|---|---|---|---|
| KCN | K⁺ (small, hard) | Carbon | Alkyl cyanide (R–CN) |
| AgCN | Ag⁺ (large, soft) | Nitrogen | Alkyl isocyanide (R–NC) |
Final Exam Tip
When you see this question in an exam:
- Define ambident nucleophile — CN⁻ has two nucleophilic sites.
- Explain the counterion effect — K⁺ leaves C free; Ag⁺ blocks C.
- State the products clearly — R–CN for KCN, R–NC for AgCN.
- Use the correct IUPAC names — cyanide vs isocyanide.
This structured answer will fetch full marks.
- AP EAPCET 2026Set eng-2026-05-12-AN1 markMCQQ.What are A and B in the following reaction sequence? C4H9BrASN2C4H9NO2 (major Product) SnHClB (A) AgNO2 ; CH3CH2CH2CH2NH2 (n-butylamine) (B) AgNO2 ; (CH3)3C−NH2 (tert-butylamine) (C) KNO2 ; CH3CH2CH(NH2)CH3 (sec-butylamine) (D) KNO2 ; (CH3)2CHCH2NH2 (isobutylamine)
›Reveal solutionSolution
AgNO2 (covalent silver nitrite) gives the nitroalkane as major product via N-attack in a clean SN2 (no skeletal rearrangement); Sn/HCl then reduces the nitro group to give n-butylamine.
Concept and Intuition
Nitrite, NO2−, is an ambident nucleophile — it can bond to an electrophile through either its nitrogen or one of its oxygens, giving two different constitutional products from the same formal reagent. The identity of the counter-cation changes which end reacts: with the more ionic alkali-metal nitrites (Na/KNO2), the reaction tends toward O-attack, giving alkyl nitrites (esters, R–O–N=O); with the more covalent silver salt AgNO2, the reaction instead proceeds through nitrogen, giving the nitroalkane R–NO2 as the major product — mirroring the well-known KCN (C-attack, nitrile) vs AgCN (N-attack, isocyanide) contrast for cyanide.
Step-by-Step Solution
- The question states the major product's formula as C4H9NO2, i.e. a nitroalkane (R–NO2), not an alkyl nitrite ester — this identifies the reagent needed as AgNO2, which favours N-attack.
- The arrow is explicitly labelled SN2: a clean, single-step backside-attack substitution with inversion at the reacting carbon and, crucially, no carbocation intermediate — so no skeletal rearrangement is possible.
- Taking C4H9Br in its default (straight-chain) reading as n-butyl bromide, SN2 attack by AgNO2 gives 1-nitrobutane, CH3CH2CH2CH2NO2, with the carbon skeleton unchanged.
- Sn/HCl is a standard reducing system for a nitro group to a primary amine (via nitroso and hydroxylamino intermediates, net six-electron reduction): R−NO2Sn/HClR−NH2 — this step does not touch the carbon skeleton at all.
- So B = n-butylamine, CH3CH2CH2CH2NH2.
Common Mistakes
- Picking KNO2 because it "sounds textbook standard" — for this ambident nucleophile, it is specifically the silver salt that gives the nitro compound as major product, the opposite pattern to what many students first guess.
- Choosing a rearranged product like tert-butylamine — that would require a carbocation intermediate (SN1-type), which the explicitly labelled SN2 mechanism rules out.
✓Final answerThe correct option is (A) — A = AgNO2, B = n-butylamine (CH3CH2CH2CH2NH2).
ANSWER: A
- AP EAPCET 2026Set eng-2026-05-13-FN1 markMCQQ.In which of the following set/s, reactant and reagent are correctly matched to get ethyl isonitrile as major product? I. CH3CH2Cl — AgCN II. CH3CHO — NH2OH, (CH3CO)2O III. CH3CH2NH2 — CHCl3/OH−, Δ The correct answer is (A) I , III (B) II , III (C) I only (D) II only
›Reveal solutionSolution
This tests which reagent pairs genuinely give an isonitrile (isocyanide) as the major product. AgCN + alkyl halide (N-attack) and the carbylamine reaction (1° amine + CHCl₃/KOH) both do; the oxime-dehydration route gives a nitrile instead. Answer: I, III.
Concept and Intuition
Isonitriles (R−NC) and nitriles (R−CN) are structural isomers formed from the ambident cyanide ion CN−, which can attack an electrophile through either its carbon end or its nitrogen end. With KCN (essentially ionic), the more nucleophilic and less electronegative carbon end attacks preferentially, giving the nitrile as major product. With AgCN, the compound is largely covalent — silver is bonded to the carbon of CN− (soft–soft Ag–C interaction), which ties up the carbon and leaves the lone pair on nitrogen free to act as the nucleophile. So AgCN + R–X gives the isocyanide as the major product. Separately, the carbylamine reaction — a 1° amine treated with chloroform and alcoholic KOH — is a completely different, classical route to isocyanides: KOH generates the electrophilic carbene :CCl2 from CHCl3, which is attacked by the amine nitrogen's lone pair, and after loss of HCl twice, gives R−NC directly. This reaction is in fact used as a qualitative test for primary amines (the isocyanide has a distinctive foul smell).
Step-by-Step Solution
- Statement I: CH3CH2Cl + AgCN. Because AgCN is covalent (Ag–C≡N), the nitrogen lone pair performs the SN2 attack on the alkyl halide's carbon, displacing Cl−, giving CH3CH2−N≡C (ethyl isocyanide) as the major product. Correctly matched.
- Statement II: CH3CHO + NH2OH gives the oxime CH3−CH=N−OH (a condensation, loss of H2O). Treating the oxime with (CH3CO)2O (a dehydrating agent) eliminates a second water molecule across the C=N–OH system to give the nitrile CH3−C≡N — not the isonitrile. Incorrectly matched for the stated target.
- Statement III: CH3CH2NH2 + CHCl3/OH−,Δ is exactly the carbylamine reaction, giving CH3CH2−NC (ethyl isocyanide) directly. Correctly matched.
- So only I and III correctly produce ethyl isonitrile as the major product.
Common Mistakes
- Confusing KCN (gives nitrile, C-attack) with AgCN (gives isonitrile, N-attack) — students often assume any cyanide salt gives the same product.
- Thinking the oxime pathway (II) also gives an isonitrile just because nitrogen is involved — it actually dehydrates straight to the nitrile, skipping the isocyanide altogether.
✓Final answerThe correct option is (A) — I, III.
ANSWER: A
- AP EAPCET 2026Set eng-2026-05-18-FN1 markMCQQ.Identify the product Y in the following reaction sequence (catalyst; major product) C2H4i) HBrii) AgCNXH2/CatalystY (major product) (A) n-propyl amine (B) Isopropyl amine (C) Ethyl amine (D) Ethyl methyl amine
›Reveal solutionSolution
This tests the AgCN-vs-KCN distinction (isocyanide formation) and the reduction of isocyanides to secondary N-methylamines; the product Y is ethyl methyl amine.
Concept and Intuition
Cyanide salts react with alkyl halides at either the carbon end (giving a nitrile, R-CN) or the nitrogen end (giving an isocyanide/carbylamine, R-NC), and which end attacks depends on the counter-cation. KCN is largely ionic, so the more nucleophilic carbon end of CN− attacks, giving the nitrile. AgCN is more covalent (Ag–C bond character ties up the carbon), forcing the alkyl halide to be attacked through nitrogen, giving the isocyanide. Isocyanides, R−N≡C, are then reduced by H2/catalyst by sequential addition across both the π bonds of the N≡C triple bond, ending in a secondary amine R−NH−CH3 (the terminal carbon becomes a methyl group bonded to N).
Step-by-Step Solution
- C2H4+HBr→CH3CH2Br (simple electrophilic addition of HBr to ethylene; both carbons are equivalent so there's no regiochemistry issue).
- CH3CH2Br+AgCN→CH3CH2−NC (ethyl isocyanide) — this is X. AgCN's covalent Ag–C bond makes the nitrogen end of cyanide the nucleophile, giving the isocyanide rather than the nitrile that KCN would give.
- CH3CH2−NCH2/catalystCH3CH2−NH−CH3 — catalytic hydrogenation reduces the isocyanide's N≡C triple bond fully, converting the terminal carbon (originally the isocyanide carbon) into a CH3 group attached to nitrogen, and giving a secondary amine.
- The product Y is CH3CH2−NH−CH3, i.e. N-ethyl-N-methylamine / ethyl methyl amine, matching option (D).
Common Mistakes
- Using KCN's reaction outcome (nitrile, then reduced to a primary amine with an extra CH2, n-propylamine) instead of recognising that AgCN specifically gives the isocyanide pathway — this is the classic trap (confusing with option A, n-propyl amine).
- Forgetting that reducing an isocyanide gives a secondary amine (with an N-methyl group), not a primary amine.
✓Final answerThe correct option is (D) — Ethyl methyl amine.
ANSWER: D
- AP EAPCET 2026Set ap-2026-05-19-FN1 markMCQQ.Consider the following reaction C2H5Cl+KCN⟶X (major product) X can also be obtained from which of the following reactions? I. C2H5NH2KOH / CHCl3, Δ II. C2H5CONH2Py, Δ III. C2H5CHO(i) NH2OH (ii) (CH3CO)2O Correct answer is (only = only) (A) I, II only (B) II, III only (C) I, III only (D) I, II, III
›Reveal solutionSolution
Ethyl chloride + KCN gives the nitrile C2H5CN; checking each alternative route shows the carbylamine reaction (I) instead gives the isomeric isocyanide, while amide dehydration (II) and aldoxime dehydration (III) both genuinely give the same nitrile.
Concept and Intuition
Cyanide is an ambident nucleophile: with alkyl halides in KCN it attacks through carbon to give a nitrile (R−CN), while the carbylamine (isocyanide) test attacks through nitrogen to give an isocyanide (R−NC) — these are structural isomers, not the same compound. Nitriles can also be made by dehydrating a primary amide (losing water from −CONH2) or by dehydrating an aldoxime (itself made from an aldehyde + hydroxylamine), both of which retain the original carbon count of the starting compound.
Step-by-Step Solution
- C2H5Cl+KCN→C2H5−CN (X = propanenitrile) via C-attack (SN2).
- Route I: C2H5NH2CHCl3/KOH,ΔC2H5NC — this is the carbylamine reaction, producing the isocyanide R−NC, NOT the nitrile R−CN. So I does not give X.
- Route II: C2H5CONH2 on dehydration loses H2O to directly give C2H5CN — same compound as X.
- Route III: C2H5CHONH2OHC2H5CH=NOH (aldoxime) (CH3CO)2O,−H2OC2H5CN — again the same nitrile as X.
- So only II and III genuinely reproduce X; I gives an isomeric but different compound.
Common Mistakes
- Treating the carbylamine product (R−NC) as 'the same as' the nitrile (R−CN) just because they share a molecular formula — they are different functional groups (isocyanide vs nitrile) with different chemistry and different smells/toxicity/reactivity.
✓Final answerThe correct option is (B) — II, III only.
ANSWER: B
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.An alkyl halide C3H7Cl, on reaction with a reagent X gave the major product Y (C4H7N). Y on hydrolysis released gas, which turns red litmus to blue. What are X and Y? (A) KCN/C2H5OH, CH3CH2CH2−NC (propyl isocyanide) (B) KCN/C2H5OH, CH3CH2CH2−CN (butanenitrile) (C) AgCN/C2H5OH, CH3CH2CH2−CN (butanenitrile) (D) AgCN/C2H5OH, CH3CH2CH2−NC (propyl isocyanide)
›Reveal solutionSolution
KCN/ethanol attacks alkyl halides mainly through carbon, giving the nitrile as major product; nitrile hydrolysis releases NH3 (turns red litmus blue) — X, Y = KCN/C2H5OH, propyl cyanide, option (B).
Concept and Intuition
Cyanide ion, CN−, is an ambident nucleophile — it can attack through either its carbon or its nitrogen atom, giving two different products from the same alkyl halide:
- R−X+CN−→R−CN (alkyl cyanide/nitrile) — attack through carbon.
- R−X+CN−→R−NC (alkyl isocyanide/carbylamine) — attack through nitrogen.
Which product dominates depends on the counter-ion/solvent:
- KCN (or NaCN) in a polar solvent like ethanol is largely ionic, so the more nucleophilic carbon end of CN− attacks preferentially — nitrile is the major product.
- AgCN is much more covalent (Ag–C bond character), which leaves the nitrogen lone pair more available/nucleophilic — isocyanide is the major product with AgCN.
The two products differ sharply in what their hydrolysis gives:
- Nitrile hydrolysis: R−CN+2H2OH+/OH−RCOOH+NH3 — releases ammonia gas, a colourless pungent gas that turns red litmus blue (basic gas) — matching the clue in the question.
- Isocyanide hydrolysis: R−NC+2H2O→RNH2+HCOOH — releases an amine and formic acid, not free ammonia gas in the same simple sense.
Step-by-Step Solution
- C3H7Cl (n-propyl chloride) + CN− replaces Cl with CN, giving a 4-carbon, 1-nitrogen product C4H7N — consistent with either CH3CH2CH2−CN (nitrile) or CH3CH2CH2−NC (isocyanide); both share the molecular formula C4H7N.
- The clue "Y on hydrolysis released gas which turns red litmus blue" identifies free ammonia, which is released specifically from nitrile hydrolysis.
- So Y must be the nitrile, CH3CH2CH2−CN (butanenitrile/butyronitrile), meaning the reaction favoured carbon-attack.
- Carbon-attack (giving the nitrile as major product) happens with KCN in ethanol (more ionic cyanide source), not with AgCN.
- So X = KCN/C2H5OH, Y = CH3CH2CH2−CN — option (B).
Common Mistakes
- Mixing up which cyanide source (KCN vs AgCN) favours which product — remembering "Ag is more covalent → N attacks" is the key trigger.
- Forgetting that isocyanide hydrolysis does not directly release ammonia gas, so it wouldn't fit the litmus clue.
✓Final answerThe correct option is (B) — X = KCN/C2H5OH, Y = CH3CH2CH2−CN (butanenitrile).
ANSWER: B
- AP EAPCET 2022Set eng-2022-07-05-AN1 markMCQQ.Assertion (A): I-Bromopentane reacts with AgCN to give pentylisocyanide Reason (R): AgCN is mainly ionic in nature (A) A is true R is true and R is correct explanation of A (B) A is true, R is true but R is not correct explanation of A (C) A is true, R is false (D) A is false, R is true
›Reveal solutionSolution
The assertion (isocyanide forms with AgCN) is correct, but the stated reason (that AgCN is ionic) is factually wrong — AgCN is predominantly covalent, and that's the real reason for the isocyanide-selective outcome.
Concept and Intuition
Cyanide is an ambident nucleophile — it can attack an electrophile through either its carbon or its nitrogen lone pair. With ionic KCN/NaCN, the free CN− ion attacks predominantly through carbon (since a C-C bond is more stable than a C-N bond), giving alkyl cyanides (nitriles) as the major product. With AgCN, however, the Ag-C bond is largely covalent, tying up the carbon and leaving the nitrogen lone pair free to act as the nucleophile, giving isocyanides (isonitriles) as the major product.
Step-by-Step Solution
- Evaluate the Assertion: 1-bromopentane reacting with AgCN indeed gives pentyl isocyanide (C5H11−NC) as the major product — this matches known behaviour of AgCN in nucleophilic substitutions, so A is TRUE.
- Evaluate the Reason: the reason claims "AgCN is mainly ionic in nature" — this is factually incorrect. AgCN is predominantly covalent (Ag-CN bond has significant covalent character), which is precisely why the reaction proceeds via nitrogen attack (isocyanide) rather than carbon attack (nitrile). So R is FALSE.
- Since A is true and R is false, the correct combination is option (C).
Common Mistakes
- Assuming the assertion and reason must both be evaluated as "linked," without independently checking the factual correctness of R — R directly contradicts the established explanation (AgCN being covalent, not ionic).
- Confusing the roles: it's KCN/NaCN that are ionic (giving nitriles via C-attack); AgCN's covalent character causes the opposite (N-attack, isocyanide) outcome.
✓Final answerThe correct option is (C) — A is true, R is false.
ANSWER: C
- AP EAPCET 2022Set eng-2022-07-07-AN1 markMCQQ.Hydrolysis of the minor product formed from the reaction of 1-Bromo propane and ethanolic KCN given (A) CH3CH2CH2−NH2 (a straight three-carbon chain ending in −NH2, n-propylamine) (B) CH3CH(NH2)CH3 (a branched three-carbon chain with −NH2 on the middle carbon, isopropylamine) (C) CH3CH2CH2−COOH (a straight three-carbon chain ending in −COOH, butanoic acid) (D) CH3CH(COOH)CH3 (a branched three-carbon chain with −COOH on the middle carbon, isobutyric acid)
›Reveal solutionSolution
The minor product of alkyl halide + ethanolic KCN is the isocyanide (attack via the N end of the ambident CN−); hydrolysing an isocyanide is the classic carbylamine reaction, giving a primary amine and formic acid.
Concept and Intuition
CN− is an ambident nucleophile — it can attack through carbon (giving a nitrile, R−CN) or through nitrogen (giving an isocyanide/isonitrile, R−NC). With the more ionic, aqueous/ethanolic KCN, C-attack (nitrile) dominates as the major product, but some N-attack (isocyanide) also occurs as a minor product. Isocyanides are hydrolysed (acid-catalyzed) to a primary amine plus formic acid — this reaction is in fact used as a diagnostic (carbylamine test) and as a method to convert an alkyl halide into a primary amine with one carbon degradation avoided (unlike nitrile hydrolysis/reduction, which keeps the extra carbon).
Step-by-Step Solution
- 1-Bromopropane + ethanolic KCN → major product: CH3CH2CH2−CN (butanenitrile precursor, C-attack); minor product: CH3CH2CH2−NC (propyl isocyanide, N-attack).
- Hydrolysis of the isocyanide (minor product): CH3CH2CH2−NC+2H2OH+CH3CH2CH2−NH2+HCOOH.
- So the product of hydrolysing the minor product is n-propylamine, CH3CH2CH2−NH2.
Common Mistakes
- Hydrolysing the major product (nitrile) instead, which would give propanoic acid/butanoic acid derivatives, not an amine directly.
- Forgetting that isocyanide hydrolysis loses the extra carbon as formic acid, giving an amine with the SAME number of carbons as the original alkyl halide (not one more, as nitrile hydrolysis would).
✓Final answerThe correct option is (A) — CH3CH2CH2−NH2.
ANSWER: A
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.