Q.Find all points of local maxima and local minima of the function f given by f(x)=x3−3x+3.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Derivative Sign Analysis
Derivative Sign Analysis: What the Slope Tells You
Imagine walking along a hilly road — sometimes uphill, sometimes downhill, occasionally flat. The derivative at any point is simply the slope of the road under your feet at that instant.
Derivative sign analysis figures out where a function is increasing, where it is decreasing, and where it has flat spots (critical points) — all from the sign of its derivative.
The Intuition First
If f′(x) is positive, the function is increasing — the graph rises as you move right. If f′(x) is negative, it is decreasing. If f′(x)=0, there is a horizontal tangent — a potential peak, valley, or flat inflection.
The key: a single point tells you little; you look at intervals. If f′(x)>0 for all x in (a,b), the function is strictly increasing on that whole interval. Same logic for negative.
The analysis is local — it describes behaviour on intervals, not isolated points. A zero derivative at a single point doesn't guarantee a max or min; check the sign change across that point.
The Precise Statement
Let f be differentiable on an open interval I. Then:
- If f′(x)>0 for all x in I, then f is strictly increasing on I.
- If f′(x)<0 for all x in I, then f is strictly decreasing on I.
- If f′(x)=0 for all x in I, then f is constant on I.
Points where f′(x)=0 (or where f′ does not exist) are critical points — the candidates for local maxima and minima.
If f′(x)>0 on (a,b)⟹f increasing on (a,b)
If f′(x)<0 on (a,b)⟹f decreasing on (a,b)
How to Perform It (Step-by-Step)
- Find the derivative f′(x).
- Find critical points: solve f′(x)=0 and check where f′(x) is undefined (but f is defined).
- Plot these on a number line — they split the domain into intervals.
- Pick a test point inside each interval and evaluate f′; only the sign matters.
- Record the sign in each interval and interpret: + means increasing, – means decreasing.
A Concrete Example
Take f(x)=x3−3x.
Step 1: f′(x)=3x2−3=3(x−1)(x+1).
Step 2: Critical points: x=−1 and x=1.
Step 3: Intervals: (−∞,−1), (−1,1), (1,∞).
Step 4: Test points:
- x=−2: f′(−2)=3(4−1)=9>0.
- x=0: f′(0)=−3<0.
- x=2: f′(2)=9>0.
Step 5: So f increases on (−∞,−1), decreases on (−1,1), increases on (1,∞). Thus x=−1 is a local maximum (sign changes + to –), and x=1 is a local minimum (– to +). …
Concept: Derivative Sign Analysis
-
Compute the derivative:
f′(x)=3x2−3=3(x2−1)=3(x−1)(x+1).
-
Critical points: f′(x)=0⇒x=−1,x=1.
-
Sign of f′(x):
- For x<−1, both factors negative → f′(x)>0 (increasing).
- For −1<x<1, (x−1) negative, (x+1) positive → f′(x)<0 (decreasing).
- For x>1, both positive → f′(x)>0 (increasing). …
Local maxima and minima occur where the derivative changes sign. For f(x)=x3−3x+3, the derivative f′(x)=3x2−3 has critical points at x=−1 and x=1. Using the first derivative test, x=−1 is a local maximum and x=1 is a local minimum.
Why derivative sign analysis?
A function rises when its slope (derivative) is positive, and falls when its slope is negative. At a local maximum, the function stops rising and starts falling — so the derivative changes from positive to negative. At a local minimum, it changes from negative to positive. This is the first derivative test, and it’s the most direct way to classify critical points for a polynomial like this.
Step-by-step solution
1. Find the derivative and critical points
The derivative is:
f′(x)=3x2−3=3(x2−1)=3(x−1)(x+1)
Set f′(x)=0:
3(x−1)(x+1)=0⇒x=1 or x=−1
These are the only critical points (the function is differentiable everywhere, so no other candidates).
2. Analyse the sign of f′(x) around each critical point
We test the sign of f′(x) in intervals determined by x=−1 and x=1.
| Interval | Test point | f′(x)=3(x−1)(x+1) | Sign of f′(x) | Behaviour of f |
|---|---|---|---|---|
| (−∞,−1) | x=−2 | 3(−3)(−1)=9 | + | Increasing |
| (−1,1) | x=0 | 3(−1)(1)=−3 | − | Decreasing |
| (1,∞) | x=2 | 3(1)(3)=9 | + | Increasing |
You don’t need to compute the exact value — just check the sign of each factor. For x<−1, both (x−1) and (x+1) are negative, so their product is positive. For −1<x<1, (x+1) is positive but (x−1) is negative, so the product is negative. For x>1, both factors are positive.
3. Apply the first derivative test …
Method: First Derivative Test for Locating Local Maxima and Minima
This is the standard technique for finding every point where a differentiable function turns from rising to falling (or the reverse).
Steps
Step 1: Differentiate and find the critical points
Compute f′(x) and solve f′(x)=0 (also note any point where f′ fails to exist but f is still defined). These critical points are the only candidates for local extrema.
Step 2: Build a sign chart
The critical points split the real line into open intervals. Pick one test point inside each interval and evaluate the sign of f′ there — factoring f′(x) first usually makes this quick, since you only need the sign of each factor.
Step 3: Apply the first derivative test
f′(x):+→− at x=c⟹c is a local maximum
f′(x):−→+ at x=c⟹c is a local minimum …
Showing the 12 most recent of 15 on this concept.
- AP EAPCET 2022Set eng-2022-07-08-FN1 markMCQQ.At x=0, f(x)=cosx−1+2x2−3x3 (A) has a minimum value (B) has a maximum value (C) has no extremum value (D) is not defined
›Reveal solutionSolution
The Taylor expansion of f about x=0 has leading term −x3/3 (odd power), so f passes through 0 changing sign — an inflection-type behavior, not an extremum.
Concept and Intuition
At a candidate critical point, if the first nonzero derivative is of odd order, the function does not have a local extremum there (it's increasing or decreasing straight through); only an even-order first-nonzero derivative gives a genuine min/max.
Step-by-Step Solution
- cosx=1−2x2+24x4−…
- f(x)=cosx−1+2x2−3x3=(1−2x2+24x4)−1+2x2−3x3+⋯=−3x3+24x4+…
- Near x=0, f(x)≈−3x3: for small x>0, f<0; for small x<0, f>0 (since −(−∣x∣)3/3=∣x∣3/3>0).
- So f changes sign through x=0 rather than staying one-signed on both sides — confirming this is not a local extremum. …
- AP EAPCET 2024Set eng-2024-05-21-FN1 markMCQQ.If f(x)=xx, then the interval in which f(x) decreases is (A) [0,e1] (B) [0,e] (C) [e1,∞] (D) [0,ee]
›Reveal solutionSolution
Differentiate xx using logarithmic differentiation and find where the derivative is negative.
Concept and Intuition
A function decreases where its derivative is negative. Since xx itself is always positive on its domain x>0, the sign of f′(x) is controlled entirely by the factor (logx+1).
Step-by-Step Solution
- f(x)=xx. Take logs: logf=xlogx.
- Differentiate: ff′=logx+1, so f′(x)=xx(logx+1).
- Since xx>0 for all x>0, the sign of f′(x) matches the sign of (logx+1).
- f′(x)<0⟺logx+1<0⟺logx<−1⟺x<e−1=e1. …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If the tangent drawn to the curve y=x3−ax2+x+1 at each point x∈R, is inclined at an acute angle with the positive direction of X-axis, then the set of all possible values of 'a' is (A) R−(−3,3) (B) [−3,3] (C) R (D) (−3,3)
›Reveal solutionSolution
The tangent slope 3x2−2ax+1 must stay strictly positive for all real x; requiring a negative discriminant gives a∈(−3,3).
Concept and Intuition
"Tangent inclined at an acute angle with the positive x-axis" means the tangent's slope is strictly positive (an acute angle has tanθ>0). Since this must hold for every real x (the curve's domain), the derivative — a quadratic in x — must never touch or cross zero; it must be strictly positive throughout.
Step-by-Step Solution
- y=x3−ax2+x+1⇒y′=3x2−2ax+1.
- Require y′>0 for all x∈R.
- A quadratic Ax2+Bx+C with A>0 is positive for all x iff its discriminant B2−4AC<0.
- Here A=3, B=−2a, C=1: discriminant =4a2−12.
- Require 4a2−12<0⇒a2<3⇒−3<a<3. …
- AP EAPCET 2026Set eng-2026-05-12-FN1 markMCQQ.In the interval (−∞,0) the function f(x)=x2+x128 (A) has only one local minimum value at x=4 (B) has one maximum and one minimum at x=4 and x=−4 respectively (C) is increasing (D) is decreasing
›Reveal solutionSolution
Checking the sign of f′(x)=2x−128/x2 on (−∞,0) shows it is always negative there, so the function is monotonically decreasing throughout the interval — no local max/min occurs in this domain.
Concept and Intuition
A function's monotonic behaviour on an interval is read off the sign of its derivative there. Critical points (where f′=0) only matter if they actually lie inside the interval in question; a critical point outside the interval is irrelevant to that interval's monotonicity.
Step-by-Step Solution
- f(x)=x2+x128. Differentiate: f′(x)=2x−x2128.
- Find critical points: f′(x)=0⇒2x=x2128⇒2x3=128⇒x3=64⇒x=4.
- The only critical point is x=4, which is not in (−∞,0).
- Check the sign of f′(x) for any x<0: 2x is negative (since x<0); x2>0 always, so x2128>0, making −x2128 negative.
- So f′(x) is the sum of two negative quantities for every x<0: f′(x)<0 throughout (−∞,0). …
- AP EAPCET 2026Set eng-2026-05-14-FN1 markMCQQ.The cubic equation 2x3−3x2+6x+2=0 (A) has 3 distinct real roots (B) has only one real root in the interval (−1,0) (C) has two distinct real roots (D) has only one real root in the interval (0,1)
›Reveal solutionSolution
Showing f′(x)>0 always (via a negative-discriminant quadratic) proves the cubic is strictly increasing and has exactly one real root; sign checking at −1 and 0 locates it in (−1,0).
Concept and Intuition
A cubic with a strictly positive (or always negative) derivative is monotonic, and a monotonic continuous function can cross zero at most once — so it has exactly one real root. To locate that root, use the Intermediate Value Theorem: find two points where the function has opposite signs, and the root must lie between them.
Step-by-Step Solution
- Let f(x)=2x3−3x2+6x+2. Compute f′(x)=6x2−6x+6=6(x2−x+1).
- Check the discriminant of x2−x+1: D=(−1)2−4(1)(1)=1−4=−3<0. Since the discriminant is negative and the leading coefficient is positive, x2−x+1>0 for all real x.
- So f′(x)=6(x2−x+1)>0 for all x — f is strictly increasing on R, hence it can have at most (and, being an odd-degree polynomial, exactly) one real root.
- This immediately rules out "3 distinct real roots" and "two distinct real roots".
- To locate the root, evaluate f at convenient points: f(−1)=2(−1)−3(1)+6(−1)+2=−2−3−6+2=−9 (negative). f(0)=0−0+0+2=2 (positive). f(1)=2−3+6+2=7 (positive). …
- AP EAPCET 2025Set eng-2025-05-21-FN1 markMCQQ.If the function y=g(x) representing the slopes of the tangents drawn to the curve y=3x4−5x3−12x2+18x+3 is strictly increasing then the domain of g(x) is (A) [−21,34] (B) (2−1,34) (C) R−(2−1,43) (D) R−[2−1,34]
›Reveal solutionSolution
The "slope function" g(x) is the derivative of the given quartic; its own strict increase is governed by g′(x)>0, i.e. a second derivative test producing a quadratic inequality. Answer: R−[−21,34].
Concept and Intuition
g(x), "the slope of the tangent" to y=3x4−5x3−12x2+18x+3, is exactly y′(x) — a new function in its own right. Asking where this function is strictly increasing is asking where g′(x)=y′′(x)>0, i.e. a standard increasing/decreasing analysis one derivative order up.
Step-by-Step Solution
- y=3x4−5x3−12x2+18x+3, so g(x)=y′=12x3−15x2−24x+18.
- g is strictly increasing where g′(x)>0: g′(x)=36x2−30x−24.
- Factor out 6: g′(x)=6(6x2−5x−4).
- Solve 6x2−5x−4=0: discriminant =25+96=121=112, so x=125±11, giving x=1216=34 and x=12−6=−21.
- Since the coefficient of x2 is positive, 6x2−5x−4>0 outside the roots and <0 between them: positive for x<−21 or x>34. …
- AP EAPCET 2025Set eng-2025-05-26-AN1 markMCQQ.If the displacement S of a particle travelling along a straight line in t seconds is given by S=2t3+2t2−2t−3, then the time taken (in seconds) by the particle to change its direction is (A) 31 (B) 2 (C) 3 (D) 21
›Reveal solutionSolution
A particle changes direction exactly when its velocity is zero and changes sign there. Answer: t=31 s.
Concept and Intuition
Direction of motion is given by the sign of velocity v=dS/dt. The particle reverses direction only at a time where v=0 and v actually changes sign across that instant (not merely touches zero, e.g. at an inflection with no sign change).
Step-by-Step Solution
- S=2t3+2t2−2t−3⇒v=dtdS=6t2+4t−2.
- Factor: v=2(3t2+2t−1)=2(3t−1)(t+1).
- v=0⇒t=31 or t=−1. Since time t≥0, only t=31 is physically valid. …
- AP EAPCET 2021Set eng-2021-08-19-FN1 markMCQQ.For which value(s) of 'a', f(x)=−x3+4ax2+2x−5 is decreasing for every 'x'? (A) (1,2) (B) (3,4) (C) R (D) No value of 'a'
›Reveal solutionSolution
f′(x)=−3x2+8ax+2 always attains a positive maximum for every real a, so f can never be decreasing for all x — the answer is "no value of a."
Concept and Intuition
For f to be decreasing on all of R, its derivative must be ≤0 everywhere. f′(x) here is a downward-opening parabola in x, so as x→±∞ it's automatically negative — the only risk is its peak (vertex) value going positive. If that peak is always positive regardless of a, no a can work.
Step-by-Step Solution
- Differentiate: f′(x)=−3x2+8ax+2.
- This is a downward parabola in x (leading coefficient −3<0), with vertex at x0=2(−3)−8a=34a.
- Maximum value of f′ at the vertex:
f′(x0)=−3(34a)2+8a(34a)+2=−316a2+332a2+2=316a2+2.
- Since 316a2≥0 for every real a, the maximum of f′ is always ≥2>0. …
- AP EAPCET 2023Set eng-2023-05-19-FN1 markMCQQ.The maximum value of 'a' such that the second derivative of x4+ax3+23x2+1 is positive for all real x is (A) 3 (B) −3 (C) 2 (D) −2
›Reveal solutionSolution
The second derivative is a quadratic in x; positivity for all x requires a non-positive discriminant, which bounds a.
Concept and Intuition
An upward-opening quadratic Ax2+Bx+C (here in x, with A=12>0) is ≥0 for all real x exactly when its discriminant B2−4AC≤0.
Step-by-Step Solution
- f(x)=x4+ax3+23x2+1.
- f′(x)=4x3+3ax2+3x.
- f′′(x)=12x2+6ax+3.
- Require f′′(x)≥0 for all real x (boundary case of the required positivity): discriminant of 12x2+6ax+3 is (6a)2−4(12)(3)=36a2−144.
- Need 36a2−144≤0⇒a2≤4⇒−2≤a≤2. …
- AP EAPCET 2025Set eng-2025-05-23-FN1 markMCQQ.Let P(x)=x4+ax3+bx2+cx+d be such that x=0 is the only real root of P1(x)=0. If P(−1)<P(1), then in the interval [−1,1] (A) P(-1) is not minimum of P(x), but P(1) is the maximum of P(x) (B) P(-1) is minimum of P(x), but P(1) is not the maximum of P(x) (C) Neither P(-1) is the minimum nor P(1) is the maximum of P(x) (D) P(-1) is the minimum and P(1) is the maximum of P(x)
›Reveal solutionSolution
This tests reading the sign of P′ from the structure of a cubic with a single real root; P turns out to be strictly decreasing then increasing with its minimum at the interior point x=0, so P(−1) is never the minimum, while the given inequality forces P(1) to be the maximum.
Concept and Intuition
A quartic's monotonicity on an interval is governed by the sign of its derivative, a cubic here. If that cubic has only one real root, the other two roots are a complex-conjugate pair, so the cubic (as a real function) doesn't change sign there — it only changes sign at the single real root. That tells us P has exactly one turning point on all of R, at x=0, and it must be a minimum (since P→+∞ both ways, being a quartic with positive leading coefficient).
Step-by-Step Solution
- P′(x)=4x3+3ax2+2bx+c. Since x=0 is a root, P′(0)=c=0.
- So P′(x)=4x3+3ax2+2bx=x(4x2+3ax+2b).
- For x=0 to be the only real root of P′, the quadratic factor 4x2+3ax+2b must have no real zero, i.e. discriminant 9a2−32b<0. Since its leading coefficient 4>0 and it has no real root, 4x2+3ax+2b>0 for all real x.
- Therefore P′(x)=x⋅(always positive), so P′(x)<0 for x<0 and P′(x)>0 for x>0: P is strictly decreasing on [−1,0] and strictly increasing on [0,1]. …
- AP EAPCET 2023Set eng-2023-05-16-AN1 markMCQQ.A(1,15), B(3,−12), C(6,12) are three consecutive turning points of a continuous curve y=f(x). If f(x)=0 only for x=α and x=β, then ∣β−α∣< (A) 27 (B) 2 (C) 5 (D) 24
›Reveal solutionSolution
The two zeros lie strictly between consecutive turning points; bounding α∈(1,3) and β∈(3,6) gives ∣β−α∣<5.
Concept and Intuition
Between a positive local extreme value and a negative one, a continuous curve must cross zero at least once (Intermediate Value Theorem). The turning points bracket where each zero can occur.
Step-by-Step Solution
- At x=1, f=15>0 (local extreme); at x=3, f=−12<0 (local extreme); so by IVT, f has a zero α strictly between 1 and 3: 1<α<3.
- At x=3, f=−12<0; at x=6, f=12>0; so f has a zero β strictly between 3 and 6: 3<β<6. …
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.The curve represented by x=t5+5t3+20t+7 and y=4t3−3t2−18t+3 is decreasing in the interval (A) (−2,−1) (B) (3/2,2) (C) (−1,3/2) (D) (−2,2)
›Reveal solutionSolution
For a parametric curve with x′(t) always positive, the curve decreases in y exactly where y′(t)<0. Here that interval is (−1,3/2).
Concept and Intuition
For a curve given parametrically, dxdy=dx/dtdy/dt. The curve is 'decreasing' (as a function y of x) precisely where this ratio is negative. If dx/dt never changes sign (stays positive throughout), then the sign of dy/dx is simply the sign of dy/dt — so we only need to analyze dy/dt.
Step-by-Step Solution
- Differentiate x=t5+5t3+20t+7: dtdx=5t4+15t2+20=5(t4+3t2+4).
- Check the sign of t4+3t2+4: substituting u=t2≥0, this is u2+3u+4, whose discriminant is 9−16=−7<0, so it's always positive. Hence dtdx>0 for every real t — x is strictly increasing in t.
- Differentiate y=4t3−3t2−18t+3: dtdy=12t2−6t−18=6(2t2−t−3)=6(2t−3)(t+1). …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.