Q.An open topped box is to be constructed by removing equal squares from each corner of a 3 metre by 8 metre rectangular sheet of aluminium and folding up the sides. Find the volume of the largest such box.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Optimization Word Problem
Optimization Word Problems
Imagine planning a garden with 40 metres of fencing and wanting the largest rectangular area. A long, thin rectangle wastes space; a square feels roomier; somewhere in between lies the best shape. That is an optimisation problem — a fixed resource and a quantity to make as large (or as small) as possible.
Every optimisation word problem has the same skeleton: the best outcome — maximum area, minimum cost, largest volume, shortest time — under a constraint — limited material, a fixed budget, a given perimeter.
The Plan of Attack
The problem gives you a story, not a graph. Your job is to turn it into a single-variable function and find its peak or valley:
- Name the quantity to optimise — call it Q, and write it using variables.
- Find the constraint — a relation between those variables (e.g. "perimeter =40").
- Reduce to one variable — use the constraint to eliminate the rest.
- Differentiate — solve Q′(x)=0 to find the critical points.
- Confirm — use Q′′(x)<0 for a maximum or Q′′(x)>0 for a minimum.
- Answer the question asked — give the actual dimensions/cost, not just x.
In board exams these problems almost always reduce to a quadratic or cubic. Once Q(x) is written, the calculus is mechanical.
The Garden, Worked
40 m of fencing encloses a rectangle; maximise the area.
- Objective: A=lw.
- Constraint: 2l+2w=40, so l+w=20.
- Reduce: w=20−l, giving A(l)=l(20−l)=20l−l2.
- Differentiate: A′(l)=20−2l=0⟹l=10.
- Confirm: A′′(l)=−2<0, a maximum.
So l=w=10 m — a 10 m × 10 m square.
A common slip: solving A′(l)=0 and stopping. Always check max vs min, and answer in the units asked.
The Common Families
| Problem type | Typical objective | Typical constraint |
|--------------|-------------------|--------------------| …
The key idea is to express the volume as a function of the side length x of the cut-out squares, then maximise it using differentiation.
Step 1: Write the volume function.
After cutting squares of side x from each corner and folding, the box has:
- length =8−2x,
- width =3−2x,
- height =x.
Hence the volume is
V(x)=x(3−2x)(8−2x)=4x3−22x2+24x.
Step 2: Find the critical point.
Differentiate: V′(x)=12x2−44x+24. Set V′(x)=0 and divide by 4:
3x2−11x+6=0.
Solving gives x=32 or x=3. Since x must be less than half the smaller side (3/2=1.5), discard x=3. So x=32 is the only feasible critical point.
Step 3: Confirm maximum and compute volume. …
We model the box volume as V(x)=x(3−2x)(8−2x), find its maximum on the feasible domain 0<x<1.5 by setting V′(x)=0, and obtain the maximum volume 27200 cubic metres when x=32 metre.
This is a classic optimisation problem from calculus — you have a fixed rectangular sheet, you cut identical squares of side x from each corner, fold up the flaps, and get an open-top box. The question asks: what size square gives the largest possible volume?
The key insight is that the box's dimensions are completely determined by x. The original sheet is 3 m by 8 m. After cutting x×x squares from each corner, the base of the box becomes a rectangle of length 8−2x and width 3−2x. The height of the box is exactly x, the side of the cut-out square. So the volume is simply:
V(x)=length×width×height=(8−2x)(3−2x)x
We want the value of x that maximises V(x), but x cannot be any number — it must be positive and small enough that the base dimensions stay positive. That gives the feasible domain: 0<x<1.5 (since 3−2x>0). Within this interval, V(x) is a smooth cubic, and its maximum occurs either at a critical point (where V′(x)=0) or at an endpoint. The endpoints give V=0, so the maximum is interior.
Let's work through it step by step.
- Write the volume function and simplify.
V(x)=x(8−2x)(3−2x)
Multiply the two linear factors first:
(8−2x)(3−2x)=24−16x−6x+4x2=24−22x+4x2
Then multiply by x:
V(x)=x(24−22x+4x2)=24x−22x2+4x3
- Differentiate to find critical points.
V′(x)=24−44x+12x2
Set V′(x)=0:
12x2−44x+24=0
Divide through by 4 to simplify:
3x2−11x+6=0
- Solve the quadratic.
3x2−11x+6=0
Using the quadratic formula:
x=611±121−72=611±49=611±7
So the two roots are:
x=611+7=618=3andx=611−7=64=32
-
Check which root lies in the feasible domain.
x=3 is outside 0<x<1.5, so it is not physically possible. The only feasible critical point is x=32 metre.
-
Confirm it gives a maximum.
You can use the second derivative test. Compute V′′(x)=−44+24x. At x=32:
V′′(32)=−44+24⋅32=−44+16=−28<0 …
Method: Optimization from a Word Problem (Objective–Constraint–Reduce–Differentiate)
The general six-step framework for turning any applied maximize/minimize word problem into a calculus problem.
Steps
Step 1: Name the quantity to optimize and express it with variables
Identify what the problem wants made as large or small as possible (here, volume), and write a formula for it using however many variables the geometry naturally involves.
Step 2: Identify the constraint linking those variables
Look for the fixed real-world limitation stated in the problem (fixed sheet dimensions, fixed perimeter, fixed surface area, etc.) and write it as a relation between the variables.
Step 3: Reduce the objective to a single variable
Use the constraint (or the geometry directly, as with dimensions expressed in terms of one cut length) to rewrite the objective function so it depends on only one variable.
Q(x)
Step 4: Differentiate, solve Q′(x)=0, and restrict to the physically valid domain …
Common Mistakes
Mistake 1: Reducing each side by x instead of 2x
Why it's wrong: cutting a square of side x from each corner removes a strip of width x from both ends of each side of the rectangle, so each full dimension shrinks by 2x, not x. Writing the base dimensions as (3−x) and (8−x) instead of (3−2x) and (8−2x) gives an entirely wrong volume function. Correct approach: picture folding up all four flaps — each side loses one square-width from each of its two ends, so the total reduction per dimension is 2x.
Mistake 2: Accepting a critical point without checking the physical domain …
Showing the 12 most recent of 19 on this concept.
- AP EAPCET 2021Set eng-2021-10-05-FN1 markMCQQ.From a rectangular sheet having dimensions 30 cm×80 cm, four equal squares of side x cm are cut at each corner. The remaining sides of the rectangle are folded up vertically so as to form an open rectangular box. Find the value of 'x' for which the volume of the box formed is maximum. (A) x=30 cm (B) x=20 cm (C) x=320 cm (D) x=15 cm
›Reveal solutionSolution
Express box volume as a function of the cut-square side x, maximize with calculus, and discard the root that isn't physically valid. The answer is (C).
Concept and Intuition
Cutting squares of side x from each corner and folding up gives a box of dimensions (30−2x)×(80−2x)×x. The volume is a cubic in x with two critical points; physically x must be less than half the shorter side (15 cm), which rules out one root.
Step-by-Step Solution
- V(x)=x(30−2x)(80−2x).
- Expand: (30−2x)(80−2x)=2400−60x−160x+4x2=2400−220x+4x2.
- V(x)=2400x−220x2+4x3.
- V′(x)=2400−440x+12x2. Set to 0: 12x2−440x+2400=0⇒3x2−110x+600=0.
- x=6110±1102−4(3)(600)=6110±12100−7200=6110±70, giving x=30 or x=320. …
- AP EAPCET 2023Set eng-2023-05-16-FN1 markMCQQ.Given that the solid obtained by rotating a rectangle about one of its side is a cylinder. If the perimeter of a rectangle is 48 cm and the volume of the cylinder formed by rotating it is maximum, then the dimensions of that rectangle is (A) 14, 10 (B) 20, 4 (C) 18, 6 (D) 8, 16
›Reveal solutionSolution
Maximise V=πr2h subject to 2(r+h)=48; the optimum rectangle is 8×16.
Concept and Intuition
Rotating a rectangle about one of its sides sweeps the opposite side around in a circle, producing a cylinder whose height equals the rotation-axis side and whose radius equals the other side. This converts a plane geometry optimisation into a single-variable calculus problem once the perimeter constraint eliminates one variable.
Step-by-Step Solution
- Let the side about which we rotate be h (height of the cylinder) and the other side be r (radius of the cylinder).
- Perimeter constraint: 2(h+r)=48⇒h+r=24⇒h=24−r.
- Volume: V(r)=πr2h=πr2(24−r)=π(24r2−r3).
- drdV=π(48r−3r2)=3πr(16−r). Setting this to zero: r=0 (rejected, degenerate) or r=16.
- Then h=24−16=8. …
- AP EAPCET 2026Set eng-2026-05-18-FN1 markMCQQ.The maximum volume (in cu. m) of the right circular cone having slant height 3m. is (A) 6π (B) 33π (C) 34π (D) 23π
›Reveal solutionSolution
Express the cone's volume in terms of its height alone using the fixed slant height, then maximize; the maximum volume is 23π m3.
Concept and Intuition
With the slant height l fixed, radius and height are linked by r2+h2=l2 (Pythagoras on the cone's cross-section). This turns a two-variable optimization (over r and h) into a single-variable one, which we handle with ordinary calculus.
Step-by-Step Solution
- Given l=3, so r2+h2=9 ⇒ r2=9−h2 (with 0<h<3).
- Volume of a cone:
V=31πr2h=3π(9−h2)h=3π(9h−h3).
- Differentiate with respect to h and set to zero:
dhdV=3π(9−3h2)=0 ⇒ h2=3 ⇒ h=3.
- Check it's a maximum: dh2d2V=3π(−6h)<0 for h>0, confirming a maximum.
- Substitute back: …
- AP EAPCET 2022Set eng-2022-07-07-AN1 markMCQQ.If an open cylinder of given surface area has maximum volume then its radius is (A) Height of the cylinder (B) Height of the cylinder / 2 (C) 2 times Height of the cylinder (D) 3 times Height of the cylinder
›Reveal solutionSolution
A constrained-optimisation problem: maximise the volume of an open cylinder for a fixed surface area. Answer: the radius equals the height (r=h).
Concept and Intuition
"Open" cylinder means it has only one circular base (like a cup, no lid), so its total surface area is base + lateral surface, S=πr2+2πrh — different from a closed cylinder (two bases) which would give a different optimum (h=2r). Fixing S lets you express h in terms of r, turning the volume into a single-variable function of r to maximise.
Step-by-Step Solution
- Surface constraint: S=πr2+2πrh⇒h=2πrS−πr2.
- Volume: V=πr2h=πr2⋅2πrS−πr2=2r(S−πr2)=2Sr−πr3.
- Differentiate w.r.t. r and set to zero: drdV=2S−3πr2=0⇒S=3πr2. …
- AP EAPCET 2022Set eng-2022-07-06-FN1 markMCQQ.The maximum area of a right angled triangle with hypotenuse h is (A) 22h2 (B) 2h2 (C) 2h2 (D) 4h2
›Reveal solutionSolution
Maximising the area of a right triangle with fixed hypotenuse h occurs at the isosceles case, giving area h2/4.
Concept and Intuition
For a right triangle with legs a,b and fixed hypotenuse h (so a2+b2=h2 is a constraint), the area 21ab is maximised by symmetry when a=b — this is a classic constrained-optimisation result, provable via calculus or the AM-GM inequality (a2+b2≥2ab, so ab≤2a2+b2=2h2, with equality iff a=b).
Step-by-Step Solution
- Let the legs be a and b=h2−a2 (from Pythagoras), and area S=21ah2−a2.
- Maximise S2=41a2(h2−a2) instead (avoids the square root). Let u=a2: S2=41u(h2−u), a downward parabola in u, maximised at u=h2/2.
- So a2=h2/2⇒a=h/2, and then b2=h2−a2=h2/2⇒b=h/2 too — the triangle is isosceles right-angled. …
- AP EAPCET 2021Set eng-2021-10-05-FN1 markMCQQ.A window is in the shape of a rectangle, with a semi-circle fused to one of its sides, as shown in the figure. [FIGURE] (a rectangle with a semi-circle attached to its right side, forming a window shape) If the perimeter of the window is fixed as 20 units, then its maximum area can be _____ sq. units. (A) π+4400 (B) π+420 (C) π+4100 (D) π+4200
›Reveal solutionSolution
This is a constrained optimization problem: maximize the area of a rectangle with a semicircle on one side, given a fixed perimeter of 20. The maximum area is π+4200, so the correct option is (D).
We have a window shaped like a rectangle with a semicircle attached to its right side. The semicircle’s diameter equals the height of the rectangle. The total perimeter is fixed at 20 units. We want the maximum possible area.
Why this approach works:
When a shape’s perimeter is fixed, the area is maximized by making the shape as “round” as possible — but here the shape is partly rectangular, so we need to balance the rectangle’s width and height. We’ll express area in terms of one variable, then use calculus (or completing the square) to find the maximum.
-
Define variables
Let the rectangle have width x (horizontal side) and height y (vertical side). The semicircle sits on the right side, so its diameter is y, and its radius is r=y/2.
-
Write the perimeter
The perimeter consists of:
- Left vertical side: y
- Top horizontal side: x
- Bottom horizontal side: x
- Right vertical side: y (but this is not part of the outer boundary — the semicircle replaces it)
- The curved semicircular arc: πr=π(y/2)
So total perimeter:
P=y+x+x+π2y=2x+y+2πy
Given P=20:
2x+y(1+2π)=20
- Solve for x in terms of y
2x=20−y(1+2π)⇒x=10−2y(1+2π)
Simplify:
x=10−2y−4πy
-
Write the area
Area = rectangle area + semicircle area:
- Rectangle: x⋅y
- Semicircle: 21πr2=21π(2y)2=8πy2
So:
A=xy+8πy2
Substitute x:
A=y(10−2y−4πy)+8πy2
A=10y−2y2−4πy2+8πy2
- Combine the y2 terms −4πy2+8πy2=−8πy2 So:
A=10y−2y2−8πy2
Factor y2:
A=10y−y2(21+8π)
Write 21=84, so:
A=10y−y2(84+π)
- Maximize using calculus …
-
- AP EAPCET 2021Set eng-2021-08-23-AN1 markMCQQ.If the area of a circular sector of perimeter 60 m is to be maximized, then its radius must be ______ m (A) 20 (B) 15 (C) 10 (D) 5
›Reveal solutionSolution
Expressing the sector's area purely in terms of r using the fixed-perimeter constraint gives A=30r−r2, maximized at r=15.
Concept and Intuition
A circular sector's perimeter includes the two straight radii plus the arc length: P=2r+rθ. Its area is A=21r2θ. Using the fixed perimeter to eliminate θ turns this into a single-variable optimization in r.
Step-by-Step Solution
- Perimeter: 2r+rθ=60⇒θ=r60−2r.
- Area: A=21r2θ=21r2⋅r60−2r=21r(60−2r)=30r−r2.
- Maximize: drdA=30−2r. Set to 0: r=15.
- Second derivative dr2d2A=−2<0, confirming a maximum. …
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.If a running track of 500 ft. is to be laid out enclosing a playground, the shape of which is a rectangle with a semicircle at each end, then the length of the rectangular portion such that the area of the rectangular portion is to be maximum is (in feet). (A) 100 (B) 125 (C) 150 (D) 200
›Reveal solutionSolution
This is a classic optimization problem: maximize the rectangular area of a stadium-shaped track of fixed perimeter. Answer: x=125 ft.
Concept and Intuition
The track's total perimeter is fixed at 500 ft. The two semicircular ends together form one full circle, and the two straight sides form the rectangle's length. Expressing the rectangle's area purely in terms of its length x (using the perimeter constraint to eliminate the radius) turns this into a single-variable calculus optimization.
Step-by-Step Solution
- Let the rectangle have length x and width 2r (so the semicircles at each end have radius r).
- Total track length: two straight sides of length x each, plus two semicircles (radius r) which together make one full circle of circumference 2πr: 2x+2πr=500⇒x+πr=250⇒r=π250−x.
- Area of the rectangular portion: A=x⋅2r=2x⋅π250−x=π500x−2x2. …
- AP EAPCET 2023Set eng-2023-05-19-FN1 markMCQQ.If the height of a cone of greatest volume that can be inscribed in a sphere of radius R is kR, then ratio of the volume of the cone to the volume of the sphere is (A) 8:27 (B) 27:64 (C) 8:125 (D) 4:5
›Reveal solutionSolution
Standard optimization: the cone of greatest volume inscribed in a sphere has height 4R/3, and its volume is 8/27 of the sphere's.
Concept and Intuition
Setting the base circle of the cone at height h above the sphere's lowest point (with apex at that lowest point), the base radius satisfies r2=2Rh−h2 by the geometry of the circle. Maximizing V(h)=31πr2h gives the classical height 34R.
Step-by-Step Solution
- r2=R2−(h−R)2=2Rh−h2.
- V(h)=31πr2h=31π(2Rh2−h3).
- dhdV=31π(4Rh−3h2)=31πh(4R−3h); setting this to 0 (excluding h=0) gives h=34R, so k=34.
- At this h: r2=2R⋅34R−(34R)2=38R2−916R2=98R2.
- Vmax=31π⋅98R2⋅34R=8132πR3.
- Vsphere=34πR3. …
- AP EAPCET 2026Set eng-2026-05-15-AN1 markMCQQ.The maximum area of the rectangle that can be inscribed in a circle of radius r is (A) 43r (B) r2 (C) 4r2 (D) 2r2
›Reveal solutionSolution
The rectangle of maximum area that fits inside a circle is always a square; working through the calculus confirms the maximum area is 2r2.
Concept and Intuition
Every rectangle inscribed in a circle has its diagonal equal to the circle's diameter, since all four corners lie on the circle and the diagonal subtends the full circle. Among rectangles with a fixed diagonal, the one with maximum area is the square — this is the geometric content behind the calculus optimization below.
Step-by-Step Solution
- Let the rectangle have half-width x and half-height y (centered at the circle's center), so its full diagonal equals the diameter 2r: x2+y2=r2.
- Area A=(2x)(2y)=4xy.
- Maximize A subject to x2+y2=r2. Parametrize x=rcosθ, y=rsinθ, so A=4r2sinθcosθ=2r2sin2θ.
- A is maximized when sin2θ=1, i.e. θ=π/4, giving Amax=2r2. …
- AP EAPCET 2022Set eng-2022-07-04-AN1 markMCQQ.A closed cylinder of given volume will have least surface area when the ratio of its height and base radius is (A) 2:1 (B) 1:2 (C) 2:3 (D) 3:2
›Reveal solutionSolution
Minimising the total surface area of a closed cylinder for a fixed volume, via ordinary calculus, gives the classic result h=2r, i.e. height-to-radius ratio 2:1.
Concept and Intuition
This is a standard optimisation problem: express the surface area as a function of one variable (using the volume constraint to eliminate the other), then find where its derivative vanishes.
Step-by-Step Solution
- Volume constraint: V=πr2h⇒h=πr2V.
- Total surface area (closed cylinder, both circular ends included): S=2πr2+2πrh.
- Substitute h: S=2πr2+2πr⋅πr2V=2πr2+r2V.
- Differentiate with respect to r: drdS=4πr−r22V.
- Set to zero: 4πr=r22V⇒4πr3=2V⇒r3=2πV.
- Since V=πr2h: r3=2ππr2h=2r2h⇒r=2h⇒h=2r. …
- AP EAPCET 2022Set eng-2022-07-08-FN1 markMCQQ.Maximum area of the rectangle inscribed in a circle of radius 10 cms is (A) 100 (B) 200 (C) 250 (D) 150
›Reveal solutionSolution
This tests the classical optimization result that the square is the area-maximizing rectangle inscribed in a given circle.
Concept and Intuition
A rectangle inscribed in a circle of radius r has its diagonal equal to the circle's diameter 2r. If the sides are x,y, then x2+y2=(2r)2, and by AM-GM, xy (the area) is maximized when x=y, i.e. when the rectangle is a square.
Step-by-Step Solution
- Let the rectangle have sides x,y with diagonal =2r=20: x2+y2=400.
- Area A=xy. Maximize subject to x2+y2=400: by AM-GM/symmetry, max occurs at x=y.
- Then 2x2=400⇒x2=200⇒x=y=200.
- Max area =xy=200. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.